CS Paper Radar

Distributed Sensing on a 110-kV Overhead-Line Maintenance Operation on an Operational Optical Ground Wire

Konstantinos Alexoudis, Torm Järvelill, Hendrik Johann Kerm, Kaida Kaeval, Florian Azendorf, Vincent Sleiffer, Jasper Müller, Chigo Okonkwo, Tom Bradley

eess.SP ·submitted 2026-09-16 14:52 UTC · v1
publishedunusual

Abstract

We demonstrate dual-modal distributed sensing on an operational 110-kV OPGW during crane maintenance. DAS resolves meter-scale lifting events and matches impulsive events to phone audio, while DTSS quantifies post-reclamping residual strain up to $\sim$398 $με$, enabling maintenance verification and asset monitoring in transmission grids.

Closest papers

Nearest neighbours by meaning across the whole index.

Distributed Fiber Monitoring on a Coherent DSP ASIC: Implementation of Longitudinal Power Monitoring

eess.SP physics.optics ·2026-11-19 ·Takeo Sasai, Yukinobu Nakajima, Minami Takahashi, Runa Kaneko, Masanori Nakamura +3 more
similarity 0.49
Abstract · 11 pages, 19 figures

Coherent DSP ASICs and transceivers to date report a rich set of optical link metrics, yet these remain cumulative over the link and provide no spatial localization. This paper presents the implementation design of fiber-longitudinal power monitoring (LPM), which recovers spatially resolved power profiles from received traffic, on a coherent DSP ASIC chip. We first identify the challenges specific to DSP implementation, and describe the enabling algorithm and architecture. We then present the key design considerations for retaining the estimation fidelity of the on-chip LPM during in-service operation. On this basis, we implement LPM on a coherent DSP, a 3-nm 800G low-power DSP ASIC housed in an OSFP pluggable module, which constitutes, to our knowledge, the first coherent DSP ASIC and transceiver to perform distributed fiber monitoring and data communication simultaneously. The on-chip LPM is experimentally validated over links of up to 1005 km using 400ZR+ and 800ZR+ traffic, with no measurable impact on Q factor or module power consumption. Multi-vendor interoperability is also demonstrated, where the on-chip LPM operates on signals transmitted by third-party transceivers. These results extend coherent DSPs from cumulative to spatially resolved monitoring, allowing pluggable transceivers, deployable from DCI to long-haul, to act not only as cost-efficient transmission elements but also as distributed monitoring points across diverse optical network infrastructure.

0.31

A Unified Interpretable Semantic Framework for Multi-Modal Fiber Sensing Under Data Scarcity

cs.LG eess.SY ·2026-11-11 ·Khouloud Abdelli
similarity 0.44
Abstract

We propose a unified interpretable semantic framework for multi-modal fiber sensing under data scarcity. The framework maps heterogeneous measurements from state of-polarization (SOP) monitoring, distributed acoustic sensing (DAS), and optical time-domain reflectometry (OTDR) into a shared set of physics-grounded semantic descriptors capturing impulsiveness, persistence, structural characteristics, and energy concentration. Inference is performed through reasoning over semantic class profiles, optionally assisted by retrieval of semantically similar examples to resolve ambiguity and support adaptation without model retraining. Experimental validation on real SOP, DAS, and OTDR datasets demonstrates robust performance across sensing modalities, achieving accuracies of 95.0%, 91.1%, and 94.6%, respectively, while providing transparent and physically interpretable decisions. The proposed framework establishes a unified and data efficient approach for optical fiber sensing in evolving and data scarce deployment environments.

0.24

Toward Service-Balanced ISAC: From Coupled RAN to De-Coupled RAN

eess.SP ·2026-09-22 ·Gangyong Zhu, Linghui Miao, Boyang Ji, Jiahui Liang, Shijian Gao +6 more
similarity 0.42
Abstract · 7 pages, 4 figures, magazine

Sixth-generation (6G) applications require radio access networks (RANs) to support reliable communication and seamless sensing across their operating regions. In coupled RAN deployments, shared downlink transmitting and uplink receiving sites constrain the network's ability to accommodate asymmetric links and different sensing geometries. De-Coupled RAN (DC-RAN) separates these functions, allowing independently deployed and coordinated base stations to extend uplink and downlink communication and sensing coverage. How this flexibility translates into balanced communication and sensing services, however, remains insufficiently explored. This article revisits the evolution from coupled to DC-RAN from the perspective of service-balanced integrated sensing and communication (ISAC). It examines how architectural choices affect the availability of both services, with communication-sensing coverage symmetry capturing their spatial alignment under application-specific quality requirements. Practical challenges include preserving communication consistency, maintaining sensing continuity, and coordinating distributed resources. Two case studies illustrate how DC-RAN can support coverage symmetry alongside consistent communication, and how complementary observations can sustain continuous and accurate sensing. These examples inform a discussion of future research toward service-balanced ISAC.

0.21

Experimental Validation of Combined Imaging and Vibration Mitigation for High-Altitude Platforms

eess.SY ·2026-09-08 ·Ákos Radványi, Anita Keszler, Dániel Balogh, Béla Takarics, András Majdik +4 more
publishedunusual similarity 0.41
Abstract · 30 pages, 7 tables, 19 Figures, This author-prepared report is based on a manuscript accepted for publication in IEEE/ASME Transactions on M…

The demand for continuous, high-resolution aerial monitoring is driving interest in High- Altitude Pseudo-Satellites (HAPS), which offer a cost-effective alternative to satellites with greater flexibility. While HAPS platforms provide valuable Earth observation potential, se- lecting an optical sensor requires balancing resolution and payload constraints, given their lightweight structures. We propose a multidisciplinary concept to enhance the Earth obser- vation capabilities of HAPS using a commercially available, weight-efficient distributed camera network, combined with advanced image processing and active vibration control. A super- resolution pipeline is introduced, where images from individual cameras are preprocessed and fed into a super-resolution algorithm. The low structural rigidity of HAPS platforms increases their sensitivity to low-frequency vibrations, which must be mitigated through active control to preserve imaging performance. A nominal H-infinity mixed-sensitivity controller is designed to suppress resonance peaks at camera locations. The methodology is experimentally validated on a simplified wing platform designed for real-time testing. Quantitative evaluation based on nine metrics demonstrates significant image quality improvements, highlighting the effectiveness of H-infinity control in mitigating low-frequency elastic modes and stabilizing the platform for super- resolution. These results show that lightweight commercial sensors, combined with advanced image processing and control, can deliver high-quality imaging for future HAPS remote sensing missions.

0.44

Cross-Medium Technology Transfer for RF Integrated Sensing and Communications

eess.SP cs.ET ·2026-09-22 ·J. Andrew Zhang, David Plets, Chao Lu, Andrea M. Tonello
unusual similarity 0.41
Abstract · 2 figures, 2 tables

Integrated sensing and communications (ISAC) spans radiofrequency (RF), visible-light, optical-fiber, power-line, and acoustic systems, yet technology transfer across these domains remains underexplored. This article examines bidirectional knowledge and technology transfers centred on RF-ISAC. It shows how VLC motivates power-domain sensing, fiber enables differential referencing and distributed processing, and PLC inspires topology-aware monitoring and adaptive probing. Conversely, RF-ISAC contributes joint signal design, nuisance suppression, and weak-return recovery. The article highlights transferable principles, required adaptations to improve ISAC, and information potentially lost across physical media.

0.24

Terra-Fi: Decoupling Sensing and Wireless Depths for Sustainable Deep Underground Monitoring

eess.SY cs.ETcs.NI ·2026-10-23 ·Kaiqiang Lin, Mohamed-Slim Alouini
similarity 0.41
Abstract · 8 pages, 4 figures, 2 tables, submitted to IEEE IoTM

Wireless underground sensor networks (WUSNs) enable in-situ monitoring of subsurface processes and buried assets to deliver substantial social and economic benefits across diverse verticals. However, meter-scale underground monitoring remains challenging since conventional WUSNs place the entire underground device at the target sensing depth, where severe soil-induced attenuation significantly degrades communication reliability and makes wireless energy transfer (WET) inefficient and even impractical. To address this limitation, we propose Terra-Fi, a novel shallow-hub and deep-sensing architecture that decouples the sensing depth from the wireless communication and energy-replenishment depth. In Terra-Fi, a shallow wireless hub is deployed at a depth favorable for communication, WET, and maintenance, while application-specific sensing probes are extended to meter-scale target layers through power-and-signal feeders. On this basis, we first examine the depth limitations of underground communication and WET and compare representative monitoring architectures. Then, we present its system architecture, operation flow, and potential benefits. Through a precision agriculture case study, our numerical results reveal that Terra-Fi establishes more robust wireless connectivity and a longer operational lifetime than conventional fully buried WUSN architectures, particularly at greater sensing depths and higher volumetric water content. Moreover, its performance gain can be enhanced through time allocation and transmission-configuration optimization. Finally, we pinpoint practical challenges and future research directions for deploying Terra-Fi into WUSN systems.

0.48

Covariance-Weighted Spectral Delay Fusion With a One-Dimensional Affine Model for High-Precision Distributed Optical-Fiber Sensing

eess.SP ·2026-09-15 ·Zhiyang Xue, Huan Huang, Ziang Chen, Zhongxing Tian, Zeyu Feng +5 more
unusual similarity 0.41
Abstract · The manuscript has been submitted for possible publication

Periodic disturbances can produce ambiguous delay estimates, limiting reliable high-precision localization in distributed optical-fiber sensing. We develop spectral delay fusion for a sensing system using a dual-wavelength bidirectional Mach-Zehnder interferometer, with four phase traces recovered by heterodyne detection and digital demodulation. With calibrated propagation parameters and timing offsets fixed, the six pairwise delay predictions form a one-dimensional affine line segment parameterized by the position of a single dominant disturbance, with sensitivities determined by propagation direction and chromatic dispersion. A generalized least-squares estimator combines unwrapped delays from robust cross-spectral phase slopes with wrapped delays from polarity-invariant phase alignment to jointly estimate position and integer ambiguities under the proposed model, using an effective joint covariance to account for shared-channel and cross-representation dependence. Experiments use a 131.335-km sensing fiber at 1530 and 1550 nm, with periodic phase perturbations applied at five nominal positions from 25 to 125 km. Across the reported groups of 20 records, the proposed method yields sample standard deviations of 1.007-1.685 m at a drive voltage of 500 mV and 0.449-1.324 m at 1 V. The ratio of the smallest single-pair sample standard deviation to that of the proposed method ranges from 2.57 to 19.56 at 500 mV and from 2.12 to 2900 at 1 V. The upper ratio reflects unstable single-pair phase-slope delay estimates for periodic disturbances in the 1-V, nominal 50-km group, where the proposed covariance-weighted fusion maintains meter-scale localization repeatability.

0.27

Channel Modeling of Single Wire Earth Return Networks for Narrowband Power Line Communication and Sensing: A Field-Validated High-Frequency Digital Twin

eess.SP eess.SY ·2026-08-21 ·Wania Anoosh, Cagil Ozansoy, Douglas Gomes, Mike Faulkner, Kristi Beqirllari
similarity 0.40
Abstract · 14 pages, 16 figures, 4 tables

Upgrading Single-Wire Earth Return (SWER) networks for smart grid capabilities requires a reliable communications technology. Narrowband Power Line Communication (NB-PLC) is a potential low cost solution. Real-world deployment is challenging due to the severe, frequency-dependent attenuation caused by complex earth-return paths and heterogeneous network infrastructure. To accurately characterize the communication channel, this paper develops a high-frequency (up to 300 kHz) digital twin of an operational SWER network. The digital twin integrates a segment-by-segment transmission line model with Vector Network Analyzer (VNA) measurements of physical grid hardware, replacing standard uniform assumptions with empirical component responses. Parametric sensitivity analysis demonstrates that distributed environmental factors, such as soil moisture and line sag, act as uniform magnitude offsets. Conversely, the conductor's magnetic permeability and local injection-transformer impedances dictate the channel's resonant spectral shape. Furthermore, cross-brand analysis proves that utilizing generic transformer models introduces significant prediction errors, confirming that accurate simulation requires manufacturer- and tap-specific data. Validated against in-situ field measurements from three transmitters, this digital twin replicates the path loss and dominant frequency-selective fading of the physical grid. Yielding a Root Mean Square Error (RMSE) between 4.65 dB and 9.73 dB across the three transmit paths, the model provides a practically reliable framework for deploying NB-PLC across rural SWER infrastructure.

0.33