CS Paper Radar

Terra-Fi: Decoupling Sensing and Wireless Depths for Sustainable Deep Underground Monitoring

Kaiqiang Lin, Mohamed-Slim Alouini

eess.SY cs.ETcs.NI ·submitted 2026-10-23 18:49 UTC · v1

Abstract

Wireless underground sensor networks (WUSNs) enable in-situ monitoring of subsurface processes and buried assets to deliver substantial social and economic benefits across diverse verticals. However, meter-scale underground monitoring remains challenging since conventional WUSNs place the entire underground device at the target sensing depth, where severe soil-induced attenuation significantly degrades communication reliability and makes wireless energy transfer (WET) inefficient and even impractical. To address this limitation, we propose Terra-Fi, a novel shallow-hub and deep-sensing architecture that decouples the sensing depth from the wireless communication and energy-replenishment depth. In Terra-Fi, a shallow wireless hub is deployed at a depth favorable for communication, WET, and maintenance, while application-specific sensing probes are extended to meter-scale target layers through power-and-signal feeders. On this basis, we first examine the depth limitations of underground communication and WET and compare representative monitoring architectures. Then, we present its system architecture, operation flow, and potential benefits. Through a precision agriculture case study, our numerical results reveal that Terra-Fi establishes more robust wireless connectivity and a longer operational lifetime than conventional fully buried WUSN architectures, particularly at greater sensing depths and higher volumetric water content. Moreover, its performance gain can be enhanced through time allocation and transmission-configuration optimization. Finally, we pinpoint practical challenges and future research directions for deploying Terra-Fi into WUSN systems.

Comment
8 pages, 4 figures, 2 tables, submitted to IEEE IoTM

Closest papers

Nearest neighbours by meaning across the whole index.

Anchor-Free Range-Free 3D IoT Localization in Buried Environments with Connectivity-Informed Power Selection and Temporal Refinement

eess.SP ·2026-10-29 ·Peyman Moeini, Mark Coates
similarity 0.56
Abstract

In underground and surface mines, wireless Internet-of- Things (IoT) tags deployed with ore or muck loads can support material and grade tracking after burial, when conventional ranging and surveyed localization infrastructure may be unavailable. Building on the three-dimensional Pro- traction Technique (3D-PT), this paper introduces 3D-PT with Power Selection (3D-PT-PS), which selects informative transmit-power levels from binary pilot measurements, and 3D-PT-PS with Temporal Refinement (3D-PT-PST), which incorporates recorded load-deposition times as weak, non- metric cues. Both methods are anchor-free and range-free and require no RSSI, measured ranges, surveyed anchors, pile dimensions, or material parameters. Monte Carlo simulations evaluate different pile sizes and tag densities. In a 5000-t crusher-pocket scenario with 125 tags, 3D-PT-PST achieves 6.12% mean NRMSE and 2.20 m 3D RMSE, reducing mean NRMSE by 13.5% relative to 3D-PT-PS and by 43.6% and 69.1% relative to calibrated MDS-MAP(P) and CATL, respectively. These results show that connectivity and timing provide complementary information.

0.27

Energy-Aware LoRaWAN Design for Long-Lived Agricultural Sensing: Insights from a Multi-Year Deployment and Controlled Platform Comparison

cs.NI ·2026-09-13 ·Carl Dickinson, Shishir Nagaraja, Chuadhry Mujeeb Ahmed
top venue similarity 0.55
Abstract · 8 pages, 5 figures. Presented at the 4th International Workshop on Long and Short Range Wireless Technologies Applied to IoT for Networks of…

Agricultural IoT nodes are often far from mains power and have limited access for maintenance. Therefore, IoT deployments benefit from low-power, long-range communication such as LoRaWAN. However, communication alone does not guarantee multi-year operation. Previous work has measured communication energy, modelled system lifetime, and documented long-lived deployments. This paper connects long-term deployment evidence with controlled platform measurements. The AgriTrust deployment has operated for 2 years and 8 months using MKR WAN1310-based Squirrel Box nodes. Building on this evidence, we compared the MKR WAN1310 and STM32WL LoRaWAN platforms using time-resolved current traces during confirmed-uplink cycles. For this outdoor comparison, we tested nine combinations of payload size and data rate with three repetitions each. Both platforms achieved 3/3 ACKed packets in every condition. The STM32WL had lower cycle energy than the WAN1310 in all tested conditions. Cycle energy ranged from 0.0350 J to 0.3550 J for STM32WL and from 0.0698 J to 0.5662 J for WAN1310. These communication events are brief, while sleep and leakage currents persist between cycles. The STM32WL sleep current was recorded at 59.6 nA, while the WAN1310 sleep current was 104 microamperes, approximately 1745 times that of the STM32WL. This difference shows that sleep current is a first-order determinant of long-term viability. However, the whole-system energy budget also depends on sensing loads, duty cycle, communication energy, and harvested-energy support. The study should be treated as a controlled characterisation, not a universal comparison across all sites, firmware stacks, or LoRaWAN modes.

0.41

Max-Min Throughput in RSMA-Aided SWIPT for Sustainable Internet of Underground Things: A Deep Reinforcement Learning Approach

eess.SY cs.LGeess.SP ·2026-11-15 ·Kaiqiang Lin, Mohamed-Slim Alouini
similarity 0.52
Abstract · 15 pages, 7 figures, and 3 tables

Unmanned aerial vehicle (UAV)-enabled wireless-powered underground sensor networks (WPUSNs) allow underground devices (UDs) to harvest radio-frequency energy from a UAV via wireless energy transfer (WET) techniques, enabling sustainable Internet of underground things (IoUT) applications. This paper integrates rate-splitting multiple access (RSMA)-aided simultaneous wireless information and power transfer (SWIPT) into UAV-enabled WPUSNs to deliver information and energy to UDs. Within this framework, we investigate a max-min fairness problem that jointly optimizes the UAV transmit power, power allocation and message splitting, power-splitting ratios, and time allocation, aiming to maximize the minimum uplink throughput across UDs subject to per-UD downlink throughput requirements and a UAV energy-consumption constraint. To address this non-convex problem under dynamic underground environments, we develop an off-policy deep reinforcement learning approach based on the primal-dual truncated quantile critics (PD-TQC), where a TQC-based reward critic evaluates the fairness objective, cost critics estimate constraint costs, and an actor learns the resource-control policy with adaptive dual-variable updates. Simulations using in-situ soil volumetric water content measurements from a center-pivot irrigation farm demonstrate that PD-TQC achieves the highest annual average minimum uplink throughput compared with four benchmarks while satisfying the per-frame constraints in over 96% of the evaluated frames, and that this throughput advantage is preserved under different Rician factors, numbers of UDs, and downlink throughput thresholds.

0.30

Sensing in Low-altitude Wireless Networks: Systems, Techniques, and Developments

cs.NI ·2026-08-11 ·Zihao Tao, Yiming Zhao, Hongtao Zhao, Zijun Gong, Ying Cui
published similarity 0.52
Abstract · 7 pages, 2 figures

The highly dynamic and safety-critical characteristics of low-altitude airspace render sensing an indispensable component of low-altitude wireless networks (LAWN). Although sensing techniques have been extensively studied under diverse paradigms, a prominent mismatch persists between state-of-the-art sensing schemes and the practical sensing demands of LAWN. To fill this research gap, this article systematically reviews LAWN-oriented sensing from the dimensions of system framework, core technologies, and research trends. Specifically, we first analyze the sensing system framework, covering concepts, services and tasks, nodes and targets, and scenarios for LAWN sensing. Next, we conduct a comparative analysis of existing sensing techniques from the perspectives of propagation medium, cooperation, methodology, and modality, analyzing their advantages and limitations. Then, we summarize promising future research directions for deployable LAWN sensing systems, covering non-cooperative and cooperative sensing, model-driven and data-driven sensing, and model-and-data-driven multi-modal sensing. Finally, we present a case study of a model-and-data-driven multi-modal method for real-time aerial target sensing. Compared with existing surveys on LAWN or sensing, this article delivers a more comprehensive, targeted review exclusively centered on LAWN sensing.

0.23

Topology-Aware Integrated Sensing, Communication, Charging in Massive Low-Altitude Wireless Network

cs.IT ·2026-10-01 ·Han Yu, Jiajun He, Zhaofeng Liu, Hing Cheung So
published similarity 0.51
Abstract

Future low-altitude wireless networks (LAWNs) are expected to simultaneously support sensing, communication, and charging, resulting in tightly coupled multi-objective optimization problems with strong interdependencies among heterogeneous functions. However, existing multi-objective frameworks typically rely on complex problem-specific formulations and alternating optimization procedures, which suffer from high computational complexity and limited scalability in large-scale, highly dynamic deployments. In this paper, we propose a unified topology-aware (TA) framework that abstracts terrestrial and non-terrestrial devices as nodes, and models their interactions as edges, forming a bipartite graph representation of the LAWN. By leveraging this graph representation, we develop a low-complexity topology reconfiguration algorithm based on a unified resource-adjustment rule. Simulation results demonstrate that the proposed TA-based method consistently outperforms state-of-the-art approaches in multi-functional coordination efficiency, while maintaining robustness and scalability in scenarios involving massive terrestrial and airborne user equipments.

0.34

Toward Service-Balanced ISAC: From Coupled RAN to De-Coupled RAN

eess.SP ·2026-09-22 ·Gangyong Zhu, Linghui Miao, Boyang Ji, Jiahui Liang, Shijian Gao +6 more
similarity 0.50
Abstract · 7 pages, 4 figures, magazine

Sixth-generation (6G) applications require radio access networks (RANs) to support reliable communication and seamless sensing across their operating regions. In coupled RAN deployments, shared downlink transmitting and uplink receiving sites constrain the network's ability to accommodate asymmetric links and different sensing geometries. De-Coupled RAN (DC-RAN) separates these functions, allowing independently deployed and coordinated base stations to extend uplink and downlink communication and sensing coverage. How this flexibility translates into balanced communication and sensing services, however, remains insufficiently explored. This article revisits the evolution from coupled to DC-RAN from the perspective of service-balanced integrated sensing and communication (ISAC). It examines how architectural choices affect the availability of both services, with communication-sensing coverage symmetry capturing their spatial alignment under application-specific quality requirements. Practical challenges include preserving communication consistency, maintaining sensing continuity, and coordinating distributed resources. Two case studies illustrate how DC-RAN can support coverage symmetry alongside consistent communication, and how complementary observations can sustain continuous and accurate sensing. These examples inform a discussion of future research toward service-balanced ISAC.

0.21

Scene Reconstruction Using Ubiquitous Wireless Signals via Diffusion Posterior Inference Over physics-Grounded Representations

cs.LG ·2026-10-15 ·Vahid Yazdnian, Yasaman Ghasempour
similarity 0.50
Abstract

Knowing the layout of the physical world matters for many applications, yet the sensors we rely on for it (e.g., cameras and LiDAR) can fail in darkness, in adverse weather, or behind walls. Wireless signals do not face these limitations: every link between a base station and a user is shaped by the buildings it passes, reflects from, or is blocked by, leaving information about the surrounding scene embedded in the wireless channel measured at the endpoints. However, mapping channel measurements to the environment is a severely ill-posed problem: a measurement records only the structures that interact with the transmitted electromagnetic waves along its propagation paths, and even these observations can often be explained by multiple plausible scenes. We therefore formulate wireless scene reconstruction as posterior inference and develop a hierarchical framework with two complementary stages to approach this problem. A wireless foundation model, pretrained to respect propagation physics, transforms each channel measurement into a representation of the scene structure that shaped the observation. A diffusion model then jointly integrates representations from multiple measurements to model and sample the posterior over building occupancy, with consensus over samples producing the final reconstruction. We demonstrate that the framework can accurately recover building footprints from wireless channel measurements alone and show that its performance depends critically on both design components: physics-grounded representations expose scene-relevant information, while joint posterior inference coherently integrates complementary observations.

0.17

OpenRIS: Democratizing reconfigurable intelligent surfaces for real-world wireless enhancements

eess.SP ·2026-08-10 ·Weicong Chen, Junjie Ai, Lin Bai, Xiaokun Teng, Wen Jun Teng +5 more
code/data similarity 0.50
Abstract · This manuscript has been submitted for possible publication

Wireless enhancement is critical for next-generation mobile communication systems to realize seamless connectivity, yet traditional network expansion strategies are becoming economically unsustainable. Reconfigurable intelligent surfaces (RISs) provide a promising alternative by improving signal utilization. However, high hardware and deployment costs of advanced RISs limit their large-scale application. Here, we democratize this technology with OpenRIS, an open-source and low-cost platform composed of Lego-like meta-bricks. With digital-twin assistance, these meta-bricks can be flexibly assembled into arbitrary shapes to achieve customized, mass-deployable wireless enhancement without extra power. Experiments and full-wave simulations verify that the discretized OpenRIS achieves consistent performance with the continuous RIS. We further develop a dual-user wireless transmission system and a three-dimensional coverage measurement system to showcase the versatile applicability of OpenRIS in wireless enhancements. As a plug-and-play solution, OpenRIS accelerates the translation of RIS theory into practice and is poised to integrate into infrastructure, reshaping the future wireless world as steel and concrete shape modern cities.

0.20