CS Paper Radar

Anchor-Free Range-Free 3D IoT Localization in Buried Environments with Connectivity-Informed Power Selection and Temporal Refinement

Peyman Moeini, Mark Coates

eess.SP ·submitted 2026-10-29 03:42 UTC · v1

Abstract

In underground and surface mines, wireless Internet-of- Things (IoT) tags deployed with ore or muck loads can support material and grade tracking after burial, when conventional ranging and surveyed localization infrastructure may be unavailable. Building on the three-dimensional Pro- traction Technique (3D-PT), this paper introduces 3D-PT with Power Selection (3D-PT-PS), which selects informative transmit-power levels from binary pilot measurements, and 3D-PT-PS with Temporal Refinement (3D-PT-PST), which incorporates recorded load-deposition times as weak, non- metric cues. Both methods are anchor-free and range-free and require no RSSI, measured ranges, surveyed anchors, pile dimensions, or material parameters. Monte Carlo simulations evaluate different pile sizes and tag densities. In a 5000-t crusher-pocket scenario with 125 tags, 3D-PT-PST achieves 6.12% mean NRMSE and 2.20 m 3D RMSE, reducing mean NRMSE by 13.5% relative to 3D-PT-PS and by 43.6% and 69.1% relative to calibrated MDS-MAP(P) and CATL, respectively. These results show that connectivity and timing provide complementary information.

Closest papers

Nearest neighbours by meaning across the whole index.

3D Protraction Technique for Anchor-Free, Range-Free Wireless Localization in Industrial Warehouses via Multi-Level Binary Reachability

eess.SP ·2026-09-08 ·Peyman Moeini, Mark Coates
similarity 0.61
Abstract

Three-dimensional (3D) localization is difficult in industrial facilities because fixed-node placement is constrained by hardware, power, networking, installation, and maintenance costs. This paper presents the 3D Protraction Technique (3D-PT), an anchor-free, range-free method that converts reciprocal packet detections at ordered transmit-power levels into reliability-weighted ordinal distance relations. It estimates a relative 3D configuration without Received Signal Strength Indicator (RSSI) magnitudes, estimated ranges, surveyed anchors, or prior coordinates. In a simulated multi-height warehouse, four transmit-power levels reduce mean network-diameter-normalized RMSE by 16.0\% relative to MDS-MAP(P) in both small- and medium-network regimes, and by 23.9\% and 34.0\% relative to CATL-reproduction, respectively. Accuracy largely saturates beyond four power levels. The results show that multi-level binary reachability provides useful geometric information beyond a single maximum-power connectivity graph.

0.54

Terra-Fi: Decoupling Sensing and Wireless Depths for Sustainable Deep Underground Monitoring

eess.SY cs.ETcs.NI ·2026-10-23 ·Kaiqiang Lin, Mohamed-Slim Alouini
similarity 0.56
Abstract · 8 pages, 4 figures, 2 tables, submitted to IEEE IoTM

Wireless underground sensor networks (WUSNs) enable in-situ monitoring of subsurface processes and buried assets to deliver substantial social and economic benefits across diverse verticals. However, meter-scale underground monitoring remains challenging since conventional WUSNs place the entire underground device at the target sensing depth, where severe soil-induced attenuation significantly degrades communication reliability and makes wireless energy transfer (WET) inefficient and even impractical. To address this limitation, we propose Terra-Fi, a novel shallow-hub and deep-sensing architecture that decouples the sensing depth from the wireless communication and energy-replenishment depth. In Terra-Fi, a shallow wireless hub is deployed at a depth favorable for communication, WET, and maintenance, while application-specific sensing probes are extended to meter-scale target layers through power-and-signal feeders. On this basis, we first examine the depth limitations of underground communication and WET and compare representative monitoring architectures. Then, we present its system architecture, operation flow, and potential benefits. Through a precision agriculture case study, our numerical results reveal that Terra-Fi establishes more robust wireless connectivity and a longer operational lifetime than conventional fully buried WUSN architectures, particularly at greater sensing depths and higher volumetric water content. Moreover, its performance gain can be enhanced through time allocation and transmission-configuration optimization. Finally, we pinpoint practical challenges and future research directions for deploying Terra-Fi into WUSN systems.

0.48

Device-Centric Cooperative Floor-Level Estimation under Sparse Anchor Deployment for Construction-Site Applications

eess.SP ·2026-11-17 ·Jiaxu Liang, Zhuoran Li, Osamu Muta, Haruto Morokuma, Naohiro Ikeda +1 more
similarity 0.54
Abstract

For construction-site applications in multi-story buildings, accurate floor-level estimation is important for tracking workers, equipment, and Internet of Things (IoT) devices. In buildings under construction, communication infrastructure and power-supply facilities are often limited and the indoor environment changes as construction progresses, making localization systems that rely on dense wireless infrastructure or fingerprint databases difficult to deploy and maintain. Low-power wide-area (LPWA) communication can provide wide-area coverage with a small number of temporarily deployed access points (APs), but under sparse AP deployment, AP-to-terminal observations alone may provide insufficient floor-related information for reliable floor-level estimation. To address this problem, this paper develops a device-centric cooperative floor-level estimation method that exploits inter-terminal observations as relative floor-difference information to complement AP-side information. For practical application with limited measurement data, AP-to-terminal observations are represented by an upper/lower-AP RSS contrast, while inter-terminal observations are statistically modeled according to floor-difference classes. The resulting AP-side and pairwise scores are combined in a weighted floor-label objective and approximately optimized using dual-order sequential iterated conditional modes (ICM). Ray-tracing simulations and LoRa measurement experiments demonstrate the effectiveness of the proposed method under different AP deployments and terminal-selection limits.

0.27

An Automated Georeferencing Technique for Multi-Temporal Stope Point Clouds for Downstream Geotechnical Analysis

cs.CV ·2026-09-24 ·Dibyayan Patra, Simit Raval, Pasindu Ranasinghe, Bikram Banerjee, Ismet Canbulat
unusual similarity 0.50
Abstract

The increasing use of UAV laser scanning in underground mines has enabled frequent acquisition of 3D point clouds from challenging environments such as stopes, generating large volumes of multi-temporal spatial data throughout successive excavation stages. However, in GNSS-denied underground environments, independently acquired stope point clouds are generated within local scanner reference frames and require registration and georeferencing before integration with mine reference data for downstream geotechnical analysis, monitoring, and mine planning. This process is commonly performed manually by aligning individual stope scans with mine reference drives, making repeated georeferencing time-consuming and potentially limiting the utilisation of routinely acquired data. This study proposes the 3D Tag-based Automated Registration and Georeferencing Technique (3D-TARGeT), an automated framework using low-cost, generic, non-unique rectangular tags to establish spatial correspondence between stope point clouds and the mine reference coordinate system. The framework combines automated tag identification, geometric tag matching, and rigid transformation estimation. It was evaluated as a proof of concept using four multi-temporal point-cloud scans of an underground mine stope, with the proposed tags simulated under representative scanning conditions. 3D-TARGeT achieved consistent centimetre-level georeferencing accuracy, with median cloud-to-cloud distance and root mean square error below 0.03 m across all scans, while substantially outperforming widely used automatic point-cloud registration techniques. Overall, 3D-TARGeT provides an accurate and robust approach for automating stope point-cloud georeferencing, reducing reliance on manual alignment and facilitating multi-temporal datasets for downstream geological and geotechnical applications.

0.29

Adaptive Calibration of RF Digital Twins via Budget-Constrained Radio Measurement Selection

cs.NI eess.SP ·2026-10-26 ·Yalin E. Sagduyu, Tugba Erpek, Hossein Jafari
published similarity 0.49
Abstract

Radio-frequency (RF) digital twins (DTs) enable site-specific wireless propagation prediction by explicitly reconstructing the physical environment and modeling electromagnetic interactions. Although physics-based DTs reduce reliance on exhaustive measurements, systematic bias relative to real radio data arises from environmental uncertainty, material inaccuracies, and geometric abstractions. Calibration using field measurements is therefore necessary but costly under limited sampling budgets. This paper studies active RF DT calibration, in which measurement locations are selected sequentially and in an online manner to estimate a calibration offset under strict measurement budget constraints. A physics-based RF DT pipeline is developed, integrating semantic geospatial data from OpenStreetMap, 3D modeling in Blender, and deterministic ray tracing in Sionna to capture dominant building and foliage effects. This RF DT is calibrated using path-loss measurements collected with software-defined radios. Multiple online calibration strategies that select radio measurement locations are compared, including random sampling, rank-structured sampling with balanced coverage, quasi-Monte Carlo ranked selection, progressive structure-aware allocation, and fully adaptive uncertainty-driven sampling with estimator stabilization. Results demonstrate that adaptive and structure-aware schemes significantly improve both mean and worst-case calibration accuracy, particularly in the low-budget regime for radio measurements.

0.33

Radio Map Construction with Post-Hoc Location Calibration under Quasi-Static Positioning Errors: Joint Estimation, Performance Bounds, and GNSS-Based Evaluation

eess.SP cs.NI ·2026-09-10 ·Koki Kanzaki, Katsuya Suto, Koya Sato
similarity 0.48
Abstract · 16 pages, 11 figures. This work has been submitted to the IEEE for possible publication

Radio maps enable environment-aware wireless and Internet-of-Things applications and can be constructed from location-tagged received signal strength (RSS) measurements collected by mobile devices. In urban environments, temporally correlated GNSS errors can shift an entire sensing trajectory, causing systematic spatial misregistration that is not mitigated by collecting more measurements. This paper presents a radio-map construction framework that uses the radio measurements themselves to calibrate erroneous location tags after data collection. The dominant positioning error is modeled as a sensor-specific quasi-static offset, which is jointly estimated with radio-propagation parameters in a Gaussian process regression (GPR) framework by exploiting complementary spatial information from distance-dependent path loss and spatially correlated shadowing. We establish lower and upper bounds on the conditional Bayes risk and show that, under a translation-invariant trajectory model, trajectory information alone cannot identify the quasi-static offset, thereby motivating the use of RSS-derived spatial information for calibration. Numerical evaluations across propagation conditions show that the proposed method reduces the mean squared error (MSE) gap from ideal GPR to approximately $3.26\mathrm{dB}^2$, compared with about $10\mathrm{dB}^2$ for position-error-agnostic and noisy-input GPR baselines. Evaluation using positioning-error models derived from smartphone GNSS measurements shows that the proposed method outperforms a KF--RTS trajectory-smoothing baseline despite unmodeled time-varying positioning errors, remaining within approximately $5\mathrm{dB}^2$ of ideal GPR at the median MSE. These results demonstrate that RSS measurements can serve not only as observations for radio-map reconstruction but also as spatial cues for post-hoc calibration of imperfectly geotagged sensing data.

0.38

CleanCity-BinSense: An IoT-Enabled Smart Waste Management System with Configurable Real-Time Fill Monitoring and Nearest-Neighbor Route Optimization

cs.NI ·2026-09-08 ·Mohammad Adnan Kabir, Intifad Muhammad Sayeed
similarity 0.48
Abstract · 8 pages,11 figures

CleanCity-BinSense addresses inefficiencies in urban waste management in developing cities, where fixed-schedule collection routes lead to overflowing bins and wasted fuel. This paper presents CleanCity-BinSense, a low-cost, end-to-end IoT-enabled smart waste management system for scalable real-time waste monitoring and demand-driven collection. The system integrates a solar-powered sensor node with an ultrasonic sensor for real-time bin fill-level monitoring. A key contribution is a configurable sensing model based on two calibration parameters, FULL_DISTANCE and EMPTY_DISTANCE, enabling deployment across bins of varying sizes and geometries without firmware modification. Fill percentage is computed using a geometry-configurable linear normalization algorithm, validated through hardware experiments with a mean absolute error (MAE) of 0.38 cm, within the manufacturer-specified sensor tolerance. Sensor readings are transmitted via Wi-Fi to a centralized web platform providing role-based dashboards for administrators, operators, and drivers, along with a public real-time bin-status map. The system also incorporates a lightweight nearest-neighbor route planning algorithm using SQL Server's spatial function to generate proximity-based collection routes with low computational overhead. Experimental evaluation shows an average end-to-end system latency of 5.3 seconds, dominated by the sensing interval rather than network overhead, while route generation for typical urban collection zones completes in under 100 ms. These results demonstrate the feasibility of a low-cost, configurable, infrastructure-light smart waste management system for heterogeneous urban waste networks in resource-constrained environments such as Dhaka, Bangladesh.

0.31

Retrospective Evaluation of Bluetooth RSSI Fingerprinting for Bin Localization on an Industrial Shop Floor

cs.NI ·2026-10-15 ·Saif Lakhani
similarity 0.48
Abstract · 2 figures, 1 CSV

This paper evaluates an archival Bluetooth Low Energy received signal strength indicator (RSSI) dataset collected for bin localization on an industrial shop floor. The installation used 24 fixed relays positioned on walls and Bluetooth beacons attached to bins, with each relay applying a Kalman filter to its own readings in firmware before publishing them. The primary survey produced 19,034 usable two-minute fingerprint samples across 90 known positions, with 23 relay measurements available as model features. We compare calibrated path-loss multilateration with two radio-map estimators: distance-weighted $k$-nearest neighbours and Random Forest regression. A random 70/30 row split measures recognition at surveyed positions, while a coordinate-grouped split reserves 27 entire positions for testing and measures interpolation to unseen positions. Random Forest achieved a median error of 0.66~m for surveyed positions, with 77.9% of estimates within 3~m and 96.3% within 10~m. For unseen positions, median error increased to 9.42~m and 55.5% of estimates were within 10~m. Path-loss multilateration produced a 19.41~m median error on unseen positions, close to the 19.62~m mean-position baseline. The results support RSSI fingerprinting for a fixed inventory of surveyed bin positions, but not precise continuous localization between survey points. Git history dates the original implementation to September 7, 2019. The evaluation code in this paper was written in October 2026 and is reported separately from the seven-year-old prototype.

0.24