CS Paper Radar

3D Protraction Technique for Anchor-Free, Range-Free Wireless Localization in Industrial Warehouses via Multi-Level Binary Reachability

Peyman Moeini, Mark Coates

eess.SP ·submitted 2026-09-08 18:17 UTC · v1

Abstract

Three-dimensional (3D) localization is difficult in industrial facilities because fixed-node placement is constrained by hardware, power, networking, installation, and maintenance costs. This paper presents the 3D Protraction Technique (3D-PT), an anchor-free, range-free method that converts reciprocal packet detections at ordered transmit-power levels into reliability-weighted ordinal distance relations. It estimates a relative 3D configuration without Received Signal Strength Indicator (RSSI) magnitudes, estimated ranges, surveyed anchors, or prior coordinates. In a simulated multi-height warehouse, four transmit-power levels reduce mean network-diameter-normalized RMSE by 16.0\% relative to MDS-MAP(P) in both small- and medium-network regimes, and by 23.9\% and 34.0\% relative to CATL-reproduction, respectively. Accuracy largely saturates beyond four power levels. The results show that multi-level binary reachability provides useful geometric information beyond a single maximum-power connectivity graph.

Closest papers

Nearest neighbours by meaning across the whole index.

Anchor-Free Range-Free 3D IoT Localization in Buried Environments with Connectivity-Informed Power Selection and Temporal Refinement

eess.SP ·2026-10-29 ·Peyman Moeini, Mark Coates
similarity 0.61
Abstract

In underground and surface mines, wireless Internet-of- Things (IoT) tags deployed with ore or muck loads can support material and grade tracking after burial, when conventional ranging and surveyed localization infrastructure may be unavailable. Building on the three-dimensional Pro- traction Technique (3D-PT), this paper introduces 3D-PT with Power Selection (3D-PT-PS), which selects informative transmit-power levels from binary pilot measurements, and 3D-PT-PS with Temporal Refinement (3D-PT-PST), which incorporates recorded load-deposition times as weak, non- metric cues. Both methods are anchor-free and range-free and require no RSSI, measured ranges, surveyed anchors, pile dimensions, or material parameters. Monte Carlo simulations evaluate different pile sizes and tag densities. In a 5000-t crusher-pocket scenario with 125 tags, 3D-PT-PST achieves 6.12% mean NRMSE and 2.20 m 3D RMSE, reducing mean NRMSE by 13.5% relative to 3D-PT-PS and by 43.6% and 69.1% relative to calibrated MDS-MAP(P) and CATL, respectively. These results show that connectivity and timing provide complementary information.

0.27

Map-Free Single-Anchor Position Localization Using Multipath Uncertainty at Upper Mid-Band

eess.SP ·2026-09-08 ·Xingchen Liu, Mingjun Ying, Xinquan Wang, Dipankar Shakya, Homa Nikbakht +2 more
published similarity 0.58
Abstract · 6 pages, 5 figures. Accepted for presentation at the 2026 IEEE Global Communications Conference (GLOBECOM), Macao, China, December 2026

Future 5G-Advanced and 6G systems will exploit directional wideband channels for path-based localization, yet map-free indoor positioning remains challenging because extracted multipath components (MPCs) vary widely in localization reliability. This paper presents an uncertainty-aware map-free single-anchor localization framework using 16.95~GHz indoor directional channel measurements collected at NYU WIRELESS in Brooklyn, New York. Per-MPC angular covariance is estimated from the local consistency of neighboring pattern-de-embedded power delay profile (PDP) observations and propagated into geometric localization through weighted fusion of point-type and line-type constraints. Measurements across 20 links with TX--RX separations from 11~m to 97~m show that the proposed covariance-weighted method achieves a mean localization error of 3.86~m, a median of 2.66~m, and 70\% of links within 5~m using five retained MPCs. It outperforms the power-weighted and unweighted variants under identical point/line constraints, as well as the literature baselines. These results indicate that local directional consistency provides reliability information beyond received power alone and demonstrate a practical map-free approach for future indoor directional systems.

0.50

Retrospective Evaluation of Bluetooth RSSI Fingerprinting for Bin Localization on an Industrial Shop Floor

cs.NI ·2026-10-15 ·Saif Lakhani
similarity 0.55
Abstract · 2 figures, 1 CSV

This paper evaluates an archival Bluetooth Low Energy received signal strength indicator (RSSI) dataset collected for bin localization on an industrial shop floor. The installation used 24 fixed relays positioned on walls and Bluetooth beacons attached to bins, with each relay applying a Kalman filter to its own readings in firmware before publishing them. The primary survey produced 19,034 usable two-minute fingerprint samples across 90 known positions, with 23 relay measurements available as model features. We compare calibrated path-loss multilateration with two radio-map estimators: distance-weighted $k$-nearest neighbours and Random Forest regression. A random 70/30 row split measures recognition at surveyed positions, while a coordinate-grouped split reserves 27 entire positions for testing and measures interpolation to unseen positions. Random Forest achieved a median error of 0.66~m for surveyed positions, with 77.9% of estimates within 3~m and 96.3% within 10~m. For unseen positions, median error increased to 9.42~m and 55.5% of estimates were within 10~m. Path-loss multilateration produced a 19.41~m median error on unseen positions, close to the 19.62~m mean-position baseline. The results support RSSI fingerprinting for a fixed inventory of surveyed bin positions, but not precise continuous localization between survey points. Git history dates the original implementation to September 7, 2019. The evaluation code in this paper was written in October 2026 and is reported separately from the seven-year-old prototype.

0.24

A Tutorial on Infrastructure Self-Calibration for Radio-Based Indoor Positioning

eess.SP ·2026-11-11 ·Paul Schwarzbach
code/data similarity 0.53
Abstract

Radio positioning needs the positions of its anchors, access points, base stations, or reconfigurable intelligent surfaces, and manual surveying is costly and error-prone. Calibrating this infrastructure from its own measurements is one estimation problem, studied in at least four communities as self-calibration, auto-positioning, anchor self-localization, network localization, or radio simultaneous localization and mapping. This tutorial teaches the problem through one factor graph. The measurement topology sets its factors, the reference information enters as priors, and other measurement models add nuisance states. The tutorial shows what ranges can identify, from rigidity to the motion a mobile device must contribute, and presents multidimensional scaling, nonlinear least squares, recursive filters, and convex relaxations as inference engines over this graph. One session of a ten-anchor ultra-wideband deployment is carried through every step, and recordings from a second, harsher deployment and a public partial mesh serve as contrasts. The examples illustrate three lessons. On a full mesh, choose a robust loss and set its scale first, and calibrate with the engine of the positioning system, since the engines then reach similar errors. On thinned or partial meshes, test the result at surveyed check points, because the start decides which minimum a solver reaches. On a line-of-sight deployment, estimate range offsets, which lower the error floor that a systematic ranging bias sets and a robust loss cannot remove. A decision tree and a table of their effects turn them into deployment guidance. Code and result tables are openly released, and the data are published separately.

0.32

RUN-O-RAN: An O-RAN-Native Architecture Enabling Cooperative Uplink Localization

cs.NI ·2026-09-17 ·Viola Bernazzoli, Alberto Ceresoli, Ilario Filippini
similarity 0.53
Abstract · 14 pages, 13 figures

Accurate positioning is increasingly required in indoor and dense urban environments; nonetheless, satellite-based systems are not always available, and standardized 5G localization solutions remain difficult to deploy with commercial devices. This paper presents RUN-O-RAN, an O-RAN-native framework that enables network-centric uplink localization using standard Sounding Reference Signal (SRS) transmissions from commercial 5G devices. RUN-O-RAN xApp coordinates serving and neighboring base stations, enabling non-serving base stations to retrieve SRS-based uplink timing measurements that would be unavailable in conventional RAN deployments, without modifying the UE or existing 3GPP signaling procedures. The framework combines cooperative SRS collection, first-path time-of-arrival estimation, timing-advance tracking, clock-drift compensation, and multi-anchor position estimation into a complete network-side localization service. Experimental evaluation over $150,000$ SRS transmissions validates the proposed framework, achieving meter-level localization under diverse propagation conditions while revealing the impact of anchor geometry and multipath on positioning accuracy. These findings demonstrate that cooperative SRS-based localization can be realized within the O-RAN ecosystem without modifying commercial UEs, providing a practical foundation for future network-native ISAC positioning services.

0.23

Device-Centric Cooperative Floor-Level Estimation under Sparse Anchor Deployment for Construction-Site Applications

eess.SP ·2026-11-17 ·Jiaxu Liang, Zhuoran Li, Osamu Muta, Haruto Morokuma, Naohiro Ikeda +1 more
similarity 0.52
Abstract

For construction-site applications in multi-story buildings, accurate floor-level estimation is important for tracking workers, equipment, and Internet of Things (IoT) devices. In buildings under construction, communication infrastructure and power-supply facilities are often limited and the indoor environment changes as construction progresses, making localization systems that rely on dense wireless infrastructure or fingerprint databases difficult to deploy and maintain. Low-power wide-area (LPWA) communication can provide wide-area coverage with a small number of temporarily deployed access points (APs), but under sparse AP deployment, AP-to-terminal observations alone may provide insufficient floor-related information for reliable floor-level estimation. To address this problem, this paper develops a device-centric cooperative floor-level estimation method that exploits inter-terminal observations as relative floor-difference information to complement AP-side information. For practical application with limited measurement data, AP-to-terminal observations are represented by an upper/lower-AP RSS contrast, while inter-terminal observations are statistically modeled according to floor-difference classes. The resulting AP-side and pairwise scores are combined in a weighted floor-label objective and approximately optimized using dual-order sequential iterated conditional modes (ICM). Ray-tracing simulations and LoRa measurement experiments demonstrate the effectiveness of the proposed method under different AP deployments and terminal-selection limits.

0.26

Analytical Modeling of Latency and Energy Trade-offs in FiRa-Like BLE-UWB Ranging and Localization Systems

cs.NI ·2026-10-24 ·Adelina Giurea, Jorg Wieme, Ben Van Herbruggen, Jeroen Hoebeke, Eli De Poorter
similarity 0.51
Abstract · submitted to IEEE Transactions on Mobile Computing

Accurate position and distance information provided by Ultra-Wideband (UWB) can enhance a wide range of applications. However, its receive-mode power consumption makes continuous channel monitoring impractical for energy-constrained devices. Consequently, UWB systems often rely on Bluetooth Low Energy (BLE) to discover peers and establish sessions before ranging begins. Although both technologies have been studied in isolation, an framework capturing the latency and energy consumption of the complete workflow is still lacking. To address this gap, we develop a unified analytical model for BLE-assisted UWB systems, from device-to-device ranging to infrastructure-based localization. The model includes closed-form expressions for discovery, parameter exchange, and ranging, and evaluates the resulting latency and energy consumption. Evaluation of three representative BLE configurations shows that the scanner consumes 28-57x more energy per discovery than the advertiser. In addition, the 99th-percentile discovery latency is 2-3.4x higher than the mean and reaches up to 110 s in the lowest-power configuration. The one-time BLE setup overhead is amortized after 24-562 ranging rounds, depending on the discovery configuration. Overall, the analysis demonstrates that the BLE discovery phase can dominate both the latency and the energy budget during short UWB interactions, making discovery configuration as important as the ranging scheme.

0.25

RAIL-5G: A Challenging Real-World Dataset and Benchmark for AI-Based 5G Indoor Localization

eess.SP cs.LG ·2026-10-18 ·Jonas Pirkl, Andreas Eidloth, Maximilian Kasparek, Tobias Feigl, Christopher Mutschler
publishedbenchmarkcode/data similarity 0.50
Abstract · To be published in the proceedings of the 16th International Conference on Indoor Positioning and Indoor Navigation (IPIN)

Reliable radio-based indoor localization is essential for industrial automation, yet existing methods are often evaluated in environments that do not fully reflect the severe multipath and non-line-of-sight (NLOS) conditions encountered in real deployments. This limits our understanding of how AI, i.e., modern geometric, unsupervised, and semi-supervised localization methods generalize to industrial 5G settings. We present RAIL-5G, a public real-world 5G NR channel impulse response (CIR) benchmark recorded in an operational railway maintenance facility. RAIL-5G covers an 811m$^2$ indoor area with eight distributed radio units, robot-mounted user equipment (UE) trajectories, high-accuracy iGPS reference positions, and severe metal-induced multipath caused by train compartments and maintenance infrastructure. We benchmark geometric time-difference of arrival (TDoA), supervised fingerprinting, unsupervised channel charting, and self-supervised wireless pretraining methods. Our results highlight the difficulty of RAIL-5G: on the full dataset, TDoA reaches 7.02m mean average error (MAE), the best unsupervised method reaches 2.46m, and supervised fingerprinting achieves 0.52m. Self-supervised pretraining reduces the labeling effort by up to one order of magnitude, but the remaining gap to supervised learning shows that robust AI-based localization under severe multipath remains an open challenge. The dataset and code are available at https://iis.fraunhofer.de/rail-5g.

0.39