CS Paper Radar

MAGNETAR: Multipath-Guided Spatial Posteriors for Transmitter Pose Inference in the Upper Mid-Band

Haozhe Lei, Ruibin Chen, Yuhan Jiang, Ali Rasteh, Aditya Dhananjay, Sundeep Rangan

cs.RO eess.SP ·submitted 2026-09-17 16:44 UTC · v1

Abstract

Robots that localize a radio transmitter need more than a point estimate: in cluttered rooms, one measurement is often consistent with several transmitter locations and, because upper-mid-band antennas are directional, several headings. We present MAGNETAR, which infers a joint posterior over planar transmitter position and heading from a single asynchronous radio-frequency (RF) multipath snapshot, represented by angle-of-arrival and signal-to-noise-ratio estimates, given the room layout and receiver pose. Among our five neural scorers, MAGNETAR adopts a shared 2D U-Net conditioned on each candidate heading, jointly normalizing scores over a discretized position-heading grid. Training uses real-to-sim-calibrated 10 GHz simulations and a small measured subset. Grid-based joint posteriors outperform parametric ones on held-out simulations, the heading-conditioned scorer transfers best to robotic measurements, and fusing joint posteriors improves on fusing position-only marginals.

Closest papers

Nearest neighbours by meaning across the whole index.

Visual-Wi-Fi Navigation to Signal-Emitting Devices

cs.RO ·2026-10-08 ·Lihao Wang, Tianjian Xu, Tianmin Shu, Renjie Zhao
similarity 0.60
Abstract · Under review

Indoor navigation to task-relevant targets remains difficult when the target is small, occluded, or visually indistinct. Meanwhile, smart appliances, mobile devices, and IoT tags emit Wi-Fi signals during everyday communication, providing a pervasive but underused spatial cue. We study visual-Wi-Fi navigation, where a robot reaches a signal-emitting device in an unmapped environment using onboard visual observations and Wi-Fi packets overheard from the device, without connecting to the device or modifying infrastructure. Realizing this requires pose-dependent Wi-Fi observations during closed-loop policy learning and reliable spatial cues from bearing measurements corrupted by indoor multipath propagation on a moving robot. We present WiFiSpaces, which extends the Habitat embodied simulator with online ray-traced Wi-Fi sensing, rendering Wi-Fi observations for a robot-mounted antenna array at continuous poses during policy rollouts. On top of it, we build ViFiNav, a localization-aware navigation framework: an online source-localization algorithm exploits robot motion to disambiguate and robustly aggregate bearings from multiple viewpoints into a confidence-aware source estimate, and a learned policy fuses this evolving estimate with depth observations and learns to act on it as it is refined. Experiments show that exploiting robot motion is key to accurate source estimates, and that fine-tuning on ray-traced Wi-Fi observations in WiFiSpaces improves the success rate of ViFiNav. The policy transfers zero-shot to unseen scene datasets, and we deploy it on a real robot with a Wi-Fi sensor built from a commodity router, without any real-world training.

0.22

Navigation with RF Cues: Embodied Perception Action under Multipath Uncertainty

cs.RO ·2026-10-06 ·Wenlihan Lu, Tianshun Li, Liuqing Yang, Shijian Gao
benchmark similarity 0.60
Abstract

Smart factory inspection requires robots to reach connected equipment without a prior map or known target coordinates. Radio frequency (RF) signals from the target can provide directional cues to complement visual observations when occlusion or poor lighting limits target detection. However, multipath propagation can distort these cues, making it difficult to infer the target's true direction from instantaneous RF measurements. To enable navigation research under these conditions, we first construct a Habitat Sionna RT benchmark that uses detailed scene geometry and assigned material properties to generate aligned visual and RF observations in response to robot actions. Building on this benchmark, we propose an uncertainty aware multimodal navigation framework that jointly estimates target direction and its uncertainty from a history of RF, visual, and pose observations. These estimates inform action selection alongside visual context. Experiments in unseen scenes show relative improvements of 18.2% in success rate (SR) and 11.5% in success weighted by path length (SPL) over the strongest evaluated baseline.

0.55

MAPLE-RF: Efficient Probabilistic RF Source Localization in Partially Explored Environments

cs.RO eess.SP ·2026-09-17 ·Haozhe Lei, Sundeep Rangan
similarity 0.59
Abstract

Localizing a radio-frequency (RF) transmitter from received signals often requires a model of the environment to predict how obstacles block and reflect the signal. In many robotic applications, however, only a partial map is available, particularly when a robot localizes the source while exploring with simultaneous localization and mapping (SLAM). We study single-snapshot transmitter localization on such partially explored maps and compare two approaches that output a posterior over transmitter locations. The first extends a digital-twin method, which ray-traces every candidate location, to partial maps by treating unexplored space as free and training on mixed map coverage. The second, MAPLE-RF, encodes estimated path angles of arrival and signal-to-noise ratios as grid channels aligned with map knownness, occupancy, and line-of-sight visibility, and a U-Net scores all candidate positions in one pass without simulating propagation at inference. Ray-tracing simulations of indoor environments indicate that training on mixed map coverage is essential for both approaches. The digital-twin approach is more accurate on most single-snapshot metrics, while MAPLE-RF comes close at a query cost that does not depend on the propagation model and is more than two orders of magnitude below a fresh full-grid query with general-purpose ray tracing. Both outperform Gaussian and Gaussian-mixture baselines, and on exploration routes guided by its own estimates, fused MAPLE-RF posteriors place more probability near the source than the compared methods. Code and data will be released.

0.29

Information-based Unified Design Framework for NMR Magnetic Tracking System

cs.RO eess.SY ·2026-10-13 ·Seçkin Eren Yetim, Mehmet Efe Tiryaki
similarity 0.58
Abstract · 6 pages, 6 figures, journal letter submission

Nuclear magnetic resonance (NMR) magnetic tracking offers a promising alternative to magnetic resonance imaging (MRI)-based localization for medical robotic guidance. However, scalar field measurements and field-aligned marker moments constrain position and orientation tracking, requiring careful configuration design. We present a unified information-based framework that uses local covariance analysis to evaluate receiver geometry, marker separation, and external source configuration in on/off-board NMR tracking. Numerical evaluation shows that planar-array precision depends jointly on receiver count and geometry, with triangular lattice arrays achieving the lowest best-case position uncertainty among the evaluated layouts for 9--20 receivers. Two spatially separated, field-aligned markers enable device-axis tracking, with predicted angular uncertainty below $2^\circ$ at the evaluated workspace center for suitable marker separations. We further establish point-dipole source--receiver duality, unifying the analysis of on/off-board NMR tracking. These

0.21

Radio-to-Pose Information for Gauge-Drift Correction in Cooperative Localization

cs.RO cs.MA ·2026-11-05 ·Aditya Iyer, Andy Ye, Akshay Narayan, Nora Ayanian
similarity 0.58
Abstract

Cooperative localization uses odometry and inter-robot measurements to estimate the motion of a robot team. These measurements describe only relative geometry, but the team's estimated position and orientation can drift together over time, i.e., gauge drift. In this work, we study correction of this gauge drift using a radio attenuation map registered in the same world coordinate frame used for robot poses. Specifically, we propose Radio-to-Pose Information (RPI), an interface that converts power residuals and their pose derivatives into a Gaussian information matrix and vector pair. RPI builds on the insight that received power is sensitive to shared displacement in the world map. The pose estimator uses the interface together with odometry and inter-robot measurements to update poses and minimize uncertainty. We characterize the shared motions detectable from the map and observed links. For an uncertain shared map, RPI keeps correlations across robots and time and reproduces joint Gaussian pose estimates and covariances. Across $1000$ simulated Gaussian trials, RPI matches the results of joint estimation. Across 32 paired trials with a registered map, RPI reduces common-position RMSE from $0.542$m to $0.140$m in a $50\times50$m arena compared with a baseline that uses radio only to weight relative measurements.

0.17

Bridging the Data Gap: Digital Twin as a New Paradigm for AI-based Radio Sensing

cs.LG eess.SP ·2026-08-11 ·Éloi Sainte-Beuve, Guillaume Larue, Louis-Adrien Dufrène, Quentin Lampin, Ali Al Khansa
published similarity 0.58
Abstract · Accepted at EUSIPCO 2026

We present a methodology that places a 3D digital twin (DT) of the environment as the main enabler behind the development of radio sensing at scale. The DT acts as a world model, providing geometry, materials, and transmitter/receiver placements to a ray-tracing engine that generates time-indexed channel impulse responses (CIRs) for large numbers of plausible scenes (moving people and objects, layout variants, seasonal/weather conditions, etc). From these synthetic sequences, we train a sequential neural network that maps CIR time series to spatial occupancy estimates, enabling device-free localization (DFL) without instrumented targets. We posit that sensing is best approached as an environment-conditioned learning problem: rather than seeking a single global model, we advocate training or fine-tuning local models specialized to a site-specific DT. As a first experiment, we introduce a novel State Space Model architecture, trained and evaluated across multiple room geometries. The localization performances obtained demonstrate the potential of the approach.

0.19

SymNetPro: LOS-Aware Directional Multi-Transmitter Localization from Sparse Radio Observations

cs.IT cs.CV ·2026-09-27 ·Lyuzhou Ye, Heng Fan, Yan Huang
code/data similarity 0.57
Abstract · Code, datasets, and model checkpoints are available at:https://github.com/LyuzhouYe98/SymNet--a-multi-task-network-for-joint-radio-map-recon…

Directional multi-transmitter localization from sparse received-power observations is difficult because the receiver observes only the source-unresolved aggregate field: multiple directional sources superpose, building blockage fragments their visible regions, and stronger sources can mask weaker ones. We present SymNetPro, which retains the dual-task radio-map reconstruction and localization backbone of SymNet and adds two targeted components. First, a sparse line-of-sight (LOS)-aware attention bias injects obstruction-aware spatial relations into selected token interactions. Second, transmitter-drop augmentation recomposes training scenes after removing one sample-supported transmitter, exposing the model to controlled source-cardinality variation. Experiments on directional ray-traced urban environments show substantially lower OSPA than representative localization baselines under extreme sparse sampling, with consistent gains under measurement noise and increasing transmitter count. A transmitter-specific evidence analysis further shows that remaining misses concentrate in regimes where the target contributes little distinguishable power to the aggregate observation.

0.31

Single-Radar Bilateral 3D Near-Field Imaging for Mobile Robots

cs.RO cs.CV ·2026-11-08 ·Yingqi Wang, Tingwei Chen, Zhongqin Wang, Min Xu
similarity 0.57
Abstract

Mobile robots operating in homes need reliable 3D perception of nearby furniture and surrounding structures, yet recovering this information on both sides of the robot's path with a single forward-mounted millimeter-wave radar remains challenging because of near-field wavefront curvature, viewpoint-dependent target visibility, and limited elevation diversity. This paper presents a motion-assisted framework for reconstructing structures on both sides of a robot's trajectory. Our near-field model relates scene reflectivity to stepped-frequency multiple-input multiple-output (MIMO) observations across frequencies and robot positions using spherical paths from transmitter (Tx) to scatterer to receiver (Rx). Bilateral Tx combining provides wideband directional weighting, while sliding-aperture back-projection coherently focuses the measurements using near-field propagation distances. Top-K power fusion combines local images with different visibility. The reconstruction provides lateral-forward support for multi-layer height extraction, followed by guarded adaptive height refinement using the original MIMO channels. Experiments in controlled, office/study, and corridor environments produce mean lateral-forward localization errors of 4.65, 5.63, and 5.98 cm, respectively, with peak-to-background ratios (PBRs) exceeding 13 dB. The framework recovers bilateral 3D scattering structure from one forward pass using a single radar, without relying on learned representations of the scene.

0.25