CS Paper Radar

Improved Droop Control in DC Microgrids via Voltage-Locked Loop Synchronization

Ognjen Stanojev, Jovan Krajacic, Enea Bianda, Orcun Karaca, Mario Schweizer

eess.SY ·submitted 2026-09-18 15:36 UTC · v1

Abstract

DC microgrids are low- or medium-voltage networks designed to connect and manage DC-based sources and loads. A key challenge in operating DC microgrids is maintaining the DC voltage within certain predefined limits while ensuring its stability. Droop control, the most common method towards addressing this challenge, enables decentralized voltage control and power sharing, but suffers from poor transient performance, resulting in voltage dips and overshoots in applications with fast varying loads such as AI datacenters. This paper introduces an improved droop control method based on voltage-locked loop synchronization, which ensures DC voltage stabilization with significantly improved transient response and achieves the desired load sharing between the available source converters. The core design principle is reflected in the functional separation of the control scheme into a virtual DC machine (VDCM) that operates as a spinning wheel and a virtual current source connected in parallel. The transient response is provided by the VDCM to damp and stabilize DC bus voltage variations, while the slow droop response is provided by the virtual current source to ensure steady-state power balance. The performance of the proposed method is validated in an experimental microgrid setup.

Closest papers

Nearest neighbours by meaning across the whole index.

Distributed Droop-Free Control of Grid-Forming Inverters with Dynamic Line and Load Modeling

eess.SY ·2026-09-07 ·Hiya Akhil Gada, Marija Ilic
similarity 0.66
Abstract

Droop-free distributed control has emerged as a promising alternative to conventional linear droop control for coordinating inverter-based resources in AC microgrids. However, existing droop-free methods typically rely on quasi-steady state network models that neglect fast electromagnetic transients and assume a decoupled dependence of active and reactive power on frequency and voltage, respectively. In this paper, we propose a transient-aware droop-free distributed primary/secondary control framework for grid-forming (GFM) inverters. The control objective is to achieve proportional active and reactive power sharing, frequency regulation, and voltage regulation within prescribed bounds. The proposed approach incorporates dynamic models of network lines and loads into the control design, enabling accurate representation of transient behavior while capturing the coupled nature of power flow interactions. A gradient-based distributed control update is derived from an optimization formulation, in which voltage magnitude constraints are enforced through a projection operator. To validate the performance of the proposed control, real-time simulation studies are conducted on a four-inverter microgrid under load changes in both strong and weak grid conditions. The results demonstrate that the proposed method improves transient performance, particularly in weak grids, while preserving the same steady state operating conditions as existing QSS-based droop-free approaches.

0.21

Grid-Forming AC/DC Converters for Meshed DC Networks via Dual-Measurement Frequency Droop

eess.SY ·2026-10-26 ·Hisham Mahmood, Marcelo A. Elizondo
similarity 0.63
Abstract · 10 pages, 12 figures, 1 table

This paper proposes and analyzes a dual-measurement frequency-droop (DMFD) controller for meshed MVDC networks. Using only two local DC measurements, bus-voltage deviation and a filtered DC-port current or power deviation, the controller enables grid-forming operation at both AC and DC ports across the mesh. Although the DMFD regulates neither the DC voltage nor the DC current directly and acts only on the terminal frequency, it is shown that AC-side synchronization closes an effective DC droop at every synchronized terminal, so that the steady operating point of the mesh exists and is unique. Constant frequency deviations at a terminal and single-terminal islanding enter the same DC equations as equivalent current offsets, with the island frequency fixed by the island power balance, allowing node voltages and branch currents to be obtained from one linear system. The steady-state model yields design-use envelopes to map the droop ratios and the net DC-injection levels into bounds on DC-voltage deviation and terminal currents. A small-signal dynamic model is developed and used to generate eigenvalue loci and damping-ratio charts that guide controller-gain selection. Averaged EMT simulations on a four-terminal ring corroborate the analysis: in regimes where PLL-based grid-following control is known to lose damping, the DMFD controller maintains stable operation and follows the predicted steady-state characteristics.

0.29

Low-Voltage Ride-Through in AI Data Centers via Coordinated Battery and Computing Load Control

eess.SY ·2026-11-14 ·Xiaoyang Wang, Xin Chen, Fang Chen Lin, Prasad Enjeti, Ali Yazdanpanah +2 more
hot direction similarity 0.60
Abstract · 5 pages, 7 figures

The ability of large AI data centers to ride through grid voltage sags is critical to power system stability and reliability. This paper frames data center low-voltage ride-through (LVRT) as a DC-link power balance problem. Once the rectifier reaches its current limit, the power drawn from the grid decreases in proportion to the grid voltage. The DC-link capacitor can supply the resulting power deficit only briefly before the DC-link voltage falls low enough to trigger undervoltage protection tripping. To address this issue, this paper proposes effective control strategies for coordinating uninterruptible power supply (UPS) battery and computing load curtailment to offset the power deficit and enable LVRT at minimum control cost. Three control scenarios are studied: UPS battery support alone, computing load curtailment alone, and the coordinated use of both resources. Electromagnetic transient (EMT) simulations using the TAMU-ERCOT AI data center model demonstrate that battery support and the coordinated strategy achieve LVRT for all tested sags, including a near-zero-voltage fault, while load curtailment alone rides through moderate voltage sags.

0.22

Certificate-based Synthesis of Coordinated Droop Control for Heterogeneous Radial Distribution Networks

eess.SY math.OC ·2026-08-11 ·Georgios Pantazis, Michelle Chong
similarity 0.58
Abstract

Voltage certificates for droop-controlled radial distribution networks are often constructed from worst-case quantities. In heterogeneous radial networks, this approach can hide where voltage deviations are most likely. Furthermore, such certificates become increasingly conservative as the network sensitivities accumulate. Leveraging the structure of the linearized DistFlow model and slope-restricted droop controllers, we derive tighter deterministic voltage certificates that retain heterogeneous network, disturbance and inverter characteristics of each bus. The certificates reveal the buses and local limitations that dominate certified voltage performance. Worst-case bounds are recovered as a special case. Although tighter, the heterogeneous certificates can still deteriorate downstream due to the network structure. To address this, we leverage our certificates as design variables for coordinated voltage control. Specifically, we develop a virtual droop architecture with coordination and affine feedforward compensation to reshape the effective voltage sensitivity, and formulate a linear program that jointly synthesizes the controller and minimizes its heterogeneous voltage certificates under operational, communication and inverter placement constraints. The resulting controller guarantees the voltage and inverter bounds for all admissible disturbances. Evaluation on two network benchmarks, a five-customer residential feeder and a 26-customer rural network comprising four feeders, demonstrates improved certificates and voltage behaviour under inverter limits.

0.34

A Distributed Step-by-step Finite-time Consensus Design for Heterogeneous Battery Energy Storage Devices with Droop Control

eess.SY ·2026-09-18 ·Yalin Zhang, Yunzhong Song, Shumin Fei
publishedhot directionhighly cited similarity 0.57
Abstract

As all generators are distributed in different areas among large scale power systems, the cooperative manipulation of the multi-generator system cannot be done well without consideration of the distance information of the generators, A distributed step-by-step finite-time consensus scheme for the heterogeneous Battery Energy Storage System (BESS) is proposed in this paper, where the coordinated consensus can be come into reality within a limited time, which is appealing for the electrical engineering community. To be concrete, at first, all BESSs are classified into several clusters according to their locations, and in each cluster, there is an active leader in charge of information receiving from outside. Then after, in order to coordinate the multi BESSs, five inputs, which are function oriented, were used to achieve energy level balancing, active/reactive power sharing, and voltage/frequency synchronization of the multi BESSs. To be further, the frequency and voltage restoration to the nominal values of the main grid was made possible by the introduction of a virtual leader, which is actually an external leader. Compared with the centralized methods, this control scheme is entirely distributed, and each BESS only utilizes the information of its own and its neighbors. Besides, this control is robust to the load perturbation and the plug-and-play of the communication topology. Finally, some simulation experiments are executed on the modified IEEE 57-bus system to verify the suggested scheme.

0.70

Enhancing Grid Stability with Synchronverter-Based Control for Grid-Side Converters in Wind Power Systems

eess.SY ·2026-11-02 ·Alan Valadez, George Weiss, Chunjiang Jia, Chong Ng
published similarity 0.55
Abstract

This paper proposes a new synchronverter control strategy for wind turbine grid-side converters, aimed at bolstering grid resilience by providing essential inertial frequency support without the need for additional energy storage components. The strategy harnesses the inherent energy storage capability of the DC-link capacitor to emulate the dynamic behavior of a synchronous generator, effectively contributing to grid inertia. A dual-controller architecture is implemented, consisting of a slow PI controller to maintain DC voltage stability and a fast protection mechanism to prevent overvoltage and undervoltage excursions. Critically, the control scheme facilitates controlled reductions of up to 10% in the DC-link voltage, generating a power reserve that can be strategically deployed for inertia emulation while preserving safe operating limits. The efficacy of the proposed method is validated through simulations of a representative three-turbine wind power plant, incorporating coordinated operation via virtual friction for inter-machine damping and local-global control strategies. Results showcase the superior performance of the proposed strategy compared to conventional grid-following control, emphasizing its potential to significantly improve grid stability and address the increasing challenges posed by high renewable energy penetration.

0.62

A Novel Asymmetric Distributed Voltage Regulation Scheme to Enhance the Utilization of Distributed Energy Resources

eess.SY ·2026-11-05 ·Madhura Sondharangalla, Dan Moldovan, Raja Ayyanar
published similarity 0.52
Abstract

Passive voltage regulation in distribution grids using distributed energy resources (DERs) is becoming the standard for feeder voltage management in both under-voltage and over-voltage scenarios. Their simple control, ease of implementation, and fast response make them ideal for distribution feeders with high-DER penetration. This paper proposes a novel distributed voltage control for DERs based on the voltage at the point of common coupling, inverter rating, and operating active power. The proposed control is designed to utilize feeder inverters efficiently to reduce the burden on the inverters in both under-voltage and over-voltage operations and increase the fairness in reactive power ($Q$) support in over-voltage operations. The proposed control is implemented in static and dynamic simulations of a real feeder to validate the performance. Results for the under-voltage scenario are also presented in the paper.

0.36

Distributed Multiconsensus Control of BESSs Based on Centrality of Eigenvectors

eess.SY ·2026-09-18 ·Yalin Zhang, Zhongxin Liu, Zengqiang Chen
publishedhighly cited similarity 0.52
Abstract

Secondary control and the State-of-Charge (SoC) balance control are important control objectives for battery energy storage systems (BESSs). In this brief, a communication weight allocation method based on the centrality of eigenvectors is designed for a connected and directed graph, which results in the adjacency matrix having a given eigenvector. Subsequently, a distributed secondary voltage controller and an SoC balancing controller are designed for droop-controlled BESSs to achieve voltage leader-following multiconsensus and SoC balancing, respectively. It is worth mentioning that under the designed voltage secondary control scheme, only a single leader is needed to achieve voltage multiconsensus control. In addition, the capacity information/droop coefficient does not need to be transmitted in the communication network to achieve power sharing according to capacity and SoC balance. For SoC balance control, the control gain is also well analyzed to ensure stability. The relevant simulations verify the effectiveness of the designed scheme.

0.68