CS Paper Radar

Certificate-based Synthesis of Coordinated Droop Control for Heterogeneous Radial Distribution Networks

Georgios Pantazis, Michelle Chong

eess.SY math.OC ·submitted 2026-08-11 17:01 UTC · v2

Abstract

Voltage certificates for droop-controlled radial distribution networks are often constructed from worst-case quantities. In heterogeneous radial networks, this approach can hide where voltage deviations are most likely. Furthermore, such certificates become increasingly conservative as the network sensitivities accumulate. Leveraging the structure of the linearized DistFlow model and slope-restricted droop controllers, we derive tighter deterministic voltage certificates that retain heterogeneous network, disturbance and inverter characteristics of each bus. The certificates reveal the buses and local limitations that dominate certified voltage performance. Worst-case bounds are recovered as a special case. Although tighter, the heterogeneous certificates can still deteriorate downstream due to the network structure. To address this, we leverage our certificates as design variables for coordinated voltage control. Specifically, we develop a virtual droop architecture with coordination and affine feedforward compensation to reshape the effective voltage sensitivity, and formulate a linear program that jointly synthesizes the controller and minimizes its heterogeneous voltage certificates under operational, communication and inverter placement constraints. The resulting controller guarantees the voltage and inverter bounds for all admissible disturbances. Evaluation on two network benchmarks, a five-customer residential feeder and a 26-customer rural network comprising four feeders, demonstrates improved certificates and voltage behaviour under inverter limits.

Closest papers

Nearest neighbours by meaning across the whole index.

Safety Verification for Voltage Control in Inverter Dominated Radial Distribution Networks under Actuator and Sensor Adversarial Attacks

eess.SY math.OC ·2026-10-30 ·Georgios Pantazis, Revi Boelen, Michelle S. Chong
benchmark similarity 0.62
Abstract

This paper develops a safety verification framework for inverter-based radial distribution networks under sensor and actuator attacks. Each customer is equipped with a droop-based controller to regulate its voltage within a desirable bound of a reference, i.e., to achieve safety. In our setting, attacks and disturbances enter the droop-based controllers, while actuator attacks corrupt the reactive power injected into the network. Consequently, invariance of the controller state alone does not guarantee compliance with inverter capacities or customer voltage limits. To address this challenge, we derive conditions to guarantee that the reactive power state remains inside a predefined ellipsoid, while at the same time ensuring that the attacked reactive power injections and customer voltages respect predetermined operating limits that hold uniformly for the entire predefined ellipsoid. Together, these conditions guarantee safety under all admissible disturbances and state-dependent sensor and actuator attacks. Finally, we express the resulting containment condition as a linear matrix inequality (LMI) feasibility problem. A five-customer radial network based on the CIGRE benchmark corroborates our theoretical developments in simulations.

0.26

Improved Droop Control in DC Microgrids via Voltage-Locked Loop Synchronization

eess.SY ·2026-09-18 ·Ognjen Stanojev, Jovan Krajacic, Enea Bianda, Orcun Karaca, Mario Schweizer
similarity 0.58
Abstract

DC microgrids are low- or medium-voltage networks designed to connect and manage DC-based sources and loads. A key challenge in operating DC microgrids is maintaining the DC voltage within certain predefined limits while ensuring its stability. Droop control, the most common method towards addressing this challenge, enables decentralized voltage control and power sharing, but suffers from poor transient performance, resulting in voltage dips and overshoots in applications with fast varying loads such as AI datacenters. This paper introduces an improved droop control method based on voltage-locked loop synchronization, which ensures DC voltage stabilization with significantly improved transient response and achieves the desired load sharing between the available source converters. The core design principle is reflected in the functional separation of the control scheme into a virtual DC machine (VDCM) that operates as a spinning wheel and a virtual current source connected in parallel. The transient response is provided by the VDCM to damp and stabilize DC bus voltage variations, while the slow droop response is provided by the virtual current source to ensure steady-state power balance. The performance of the proposed method is validated in an experimental microgrid setup.

0.18

Fixed-Time Voltage Regulation in Distribution Networks with Impedance Awareness

eess.SY ·2026-10-01 ·Nilanjan Roy Chowdhury, Venkatesh Sarangan
similarity 0.58
Abstract · 8 pages, 6 figures

This letter introduces an optimization-based fixed time control algorithm for solving the voltage regulation problem of a radial and balanced power distribution network. The proposed algorithm requires no prior knowledge of the exact network impedance (resistance and reactance), yet guarantees voltage convergence to the predefined safe limit within a fixed time-window. We embrace results from Fixed-time stability (FxTs) and Control Lyapunov function (CLF) to analyze the stability and robustness of the underlying algorithm and then synthesize it leveraging the Quadratic Programming (QP) approach. We first analytically provide sufficient conditions on the control gains and the design parameters, that can ensure voltage regulation in fixed-time. Thereafter we transform the existing voltage regulation problem into an equivalent QP-based optimization framework and translate the aforesaid conditions to find feasible solutions for voltage stability. We empirically verify the efficacy of our proposed algorithm on the IEEE-33 bus distribution network and compare its performance against other existing robust control methods.

0.29

Reducing Data-Center Load Transfers with Ride-Through-Aware Voltage Control

eess.SY ·2026-11-05 ·Siyu Lu, Yang Weng
similarity 0.57
Abstract · 10 pages, 5 figures

Fault-induced transfers of large data centers to backup supply can cause abrupt reductions in grid-served demand. Coordinating reactive-power support to mitigate these transfers requires consideration of facility-specific voltage--duration ride-through characteristics, particularly when support capacity is limited. This paper develops a ride-through-aware extension of quadratic voltage control that assesses voltage deviations relative to the admissible margins specified by these characteristics. We establish four design requirements that jointly express envelope-based severity, duration dependence, and preventive voltage-restoration incentives. Within a multiplicatively gated quadratic class, we derive necessary and sufficient conditions for satisfying these requirements and construct an explicit family of envelope-normalized objectives. We apply the proposed objectives to reactive-power coordination and evaluate their performance on the IEEE 14-bus, New England 39-bus, and NPCC 140-bus systems. Comparisons with Volt/VAR control, conventional nominal-voltage tracking, and recent data-center voltage-control methods demonstrate improved data-center retention under matched reactive-power support constraints. In the IEEE 14-bus study, the proposed controller reduces the mean data-center disconnection rate by 44.8\% and grid-demand loss by 27.4\% compared with the best-performing baseline. These results highlight the benefit of incorporating data-center ride-through requirements into reactive-power allocation.

0.50

Decentralized Stability Certificates for Interoperability in Power-Electronics-Dominated Power Systems

eess.SY ·2026-10-19 ·Linbin Huang, Verena Häberle, Ruohan Leng, Huanhai Xin, Hua Geng +2 more
similarity 0.57
Abstract

The rapid integration of power electronics converters has fundamentally altered the power grid's dynamic landscape, making modularity of operation and interoperability of heterogeneous devices two critical hurdles for power system reliability. In control language, these challenges can be paraphrased as decentralized certificates on the input/output behavior of every device, assured by local control, so that stability and guaranteed performance of the interconnected system emerge. For the power system application, such certificates should eventually be part of the rule book, the so-called grid code, and thus be generic and minimally restrictive for the control architecture of each device. Classical system-theoretic angles of attack to these questions go back to dissipativity concepts, which have historically been co-developed in automatic control, circuit theory, and power systems. Since standard dissipativity (e.g., passivity or small gain) criteria fall short in terms of conservatism, a range of more flexible and advanced tools have been developed to assure less conservative decentralized certificates guaranteeing stability under interconnection as well as dynamic performance following a disturbance. In this article, we review a range of methods that have been put forward to tackle these questions, compare and validate them, and point towards practically relevant research gaps which are amenable to control-theoretic approaches. Moreover, we provide a tutorial exposition of practically relevant power systems/electronics issues accessible to control engineers.

0.17

Distributed Droop-Free Control of Grid-Forming Inverters with Dynamic Line and Load Modeling

eess.SY ·2026-09-07 ·Hiya Akhil Gada, Marija Ilic
similarity 0.56
Abstract

Droop-free distributed control has emerged as a promising alternative to conventional linear droop control for coordinating inverter-based resources in AC microgrids. However, existing droop-free methods typically rely on quasi-steady state network models that neglect fast electromagnetic transients and assume a decoupled dependence of active and reactive power on frequency and voltage, respectively. In this paper, we propose a transient-aware droop-free distributed primary/secondary control framework for grid-forming (GFM) inverters. The control objective is to achieve proportional active and reactive power sharing, frequency regulation, and voltage regulation within prescribed bounds. The proposed approach incorporates dynamic models of network lines and loads into the control design, enabling accurate representation of transient behavior while capturing the coupled nature of power flow interactions. A gradient-based distributed control update is derived from an optimization formulation, in which voltage magnitude constraints are enforced through a projection operator. To validate the performance of the proposed control, real-time simulation studies are conducted on a four-inverter microgrid under load changes in both strong and weak grid conditions. The results demonstrate that the proposed method improves transient performance, particularly in weak grids, while preserving the same steady state operating conditions as existing QSS-based droop-free approaches.

0.21

A Novel Asymmetric Distributed Voltage Regulation Scheme to Enhance the Utilization of Distributed Energy Resources

eess.SY ·2026-11-05 ·Madhura Sondharangalla, Dan Moldovan, Raja Ayyanar
published similarity 0.56
Abstract

Passive voltage regulation in distribution grids using distributed energy resources (DERs) is becoming the standard for feeder voltage management in both under-voltage and over-voltage scenarios. Their simple control, ease of implementation, and fast response make them ideal for distribution feeders with high-DER penetration. This paper proposes a novel distributed voltage control for DERs based on the voltage at the point of common coupling, inverter rating, and operating active power. The proposed control is designed to utilize feeder inverters efficiently to reduce the burden on the inverters in both under-voltage and over-voltage operations and increase the fairness in reactive power ($Q$) support in over-voltage operations. The proposed control is implemented in static and dynamic simulations of a real feeder to validate the performance. Results for the under-voltage scenario are also presented in the paper.

0.36

DistFlow and Its Conic Relaxation: Regularity, Monotonicity, and Hybrid Exactness via Graph Decomposition

eess.SY math.OC ·2026-10-30 ·Xinliang Dai
theory similarity 0.56
Abstract

Classical exactness conditions for conic relaxations of the DistFlow model rely, among other assumptions, either on all nodal injections being adjustable or on a network-wide path condition. In practice, these conditions may not hold uniformly across a feeder: controllable distributed energy resources (DERs) sit at some buses and fixed loads at others, while reverse flows from DER-rich regions can violate the path condition. This paper certifies exactness region by region and composes the regional certificates, accounting for perturbations that propagate downstream through voltages. We first introduce a subtree voltage stability region, in which the network and all compatible subtrees remain regular. Within it, two endpoint sign conditions, one relaxing the nonnegative-flow assumption and one implied by the classical path condition, yield monotone responses of voltages, currents, and losses to root voltages. Using duality, the implicit function theorem, and sign properties of inverse sensitivity matrices, we recast both classical arguments as individual sign certificates on branch multipliers. This turns exactness into a branchwise property that can be certified region by region. A partition rule then splits the network into dispatchable and passive subtrees, and a hybrid certificate combines their local conditions into exactness of the full-network relaxation, under additional operating-limit and objective conditions. In particular, placing controllable DERs at both ends of a branch with large reverse flow exempts that branch from the passive sign conditions.

0.29