CS Paper Radar

Recursive Parameter Identification of Nonlinear Stochastic State-Space Models via Sequentialized Ensemble Kalman Inversion

Farzaneh Barat, Rachel Carter, Sara Wilson, Huazhen Fang

eess.SY ·submitted 2026-09-19 02:33 UTC · v1
publishedbenchmark

Abstract

Recursive parameter identification in nonlinear stochastic state-space models is challenging because unknown parameters affect the measurements through latent-state dynamics. This paper develops a sequentialized ensemble Kalman inversion method for recursive parameter identification from streaming measurements. The proposed method represents the parameter posterior by an evolving ensemble and updates it sequentially as new measurements become available. For each parameter ensemble member, implicit particle filtering is used to approximate the predictive observation statistics required for parameter correction. This formulation enables recursive parameter learning. The method is evaluated on a strongly nonlinear benchmark, with comparison to several existing methods, and then on a nonlinear double-capacitor lithium-ion battery model. The numerical results demonstrate accurate recursive parameter identification and latent-state estimation.

Comment
Accepted for publication in the 2026 65th IEEE Conference on Decision and Control (CDC)

Closest papers

Nearest neighbours by meaning across the whole index.

System Identification for Nonlinear Stochastic State-Space Models Using Ensemble Kalman Inversion with Application to Lithium-Ion Batteries

eess.SY ·2026-10-19 ·Farzaneh Barat, Rachel Carter, Sara Wilson, Huijeong Kim, Xinfan Lin +1 more
similarity 0.83
Abstract · 16 pages, 8 figures, 3 tables

Nonlinear state-space system identification has attracted decades of interest, yet remains challenging because of the interplay among unknown parameters, nonlinear dynamics, and latent state variables. Its difficulty increases dramatically when the state and parameter dimensions increase. To address this challenge, we develop an ensemble Kalman inversion (EnKI)-based approach. This approach leverages EnKI to perform maximum a posteriori parameter estimation through successive local Gaussian approximations, enabling an iterative and incremental search for unknown parameters. The search combines Monte Carlo sampling with Kalman-type updates to evolve an ensemble of parameter samples, thereby offering empirical stability and the ability to handle strongly nonlinear models. The EnKI search is coupled with state estimation conditioned on the latest parameter estimates. This enables parameter identification along with latent state recovery. To improve scalability for large datasets, we further develop a cascaded EnKI (CasEnKI) method, which assimilates subdatasets sequentially to accelerate computation. We validate the proposed methods using a lithium-ion battery model with ten state variables and 18 unknown parameters. Simulation results show that the EnKI approach offers high identification accuracy and empirical stability in parameter search. Further, experimental results illustrate the computational efficiency and scalability of the CasEnKI method for large battery datasets.

0.12

Regularised Iterative Generalised Least Squares with Optimal Selection of the Hyper-Parameter for Identifying Nonlinear Phenomenological Models

cs.LG stat.MEeess.SY ·2026-08-19 ·Mark Cary, Charles Bokor
similarity 0.58
Abstract · 18 pages, 5 figures, 2 tables

In some fields currently dominated by empirical approaches, such as state of health (SoH) prediction for lithium-ion batteries, phenomenological models motivated by quasi-physical thinking contain parameters to be estimated from experimental data. Often the structure of such models yields fully or partially confounded parameters, which are difficult or even impossible to estimate reliably. To preserve the desired model formulation and simultaneously improve the numerical conditioning for the problem we introduce a ridge regression scheme. An automated method is provided, based on information theoretic measures of model performance, which optimises the ridge regression hyper-parameter at each iteration. The formulae presented require fixed point iteration to solve for the hyper-parameter. Given a suitable starting value, analysis demonstrates convergence is very rapid. The optimal hyper-parameter selection mechanism is incorporated within an efficient regularised iterative generalised least squares mechanism, capable of fitting both heteroscedastic and serially correlated data as required. Simulation confirms the efficacy of the overall method.

0.35

MARS: Feature-guided physics-informed deep learning for real-time battery health and lifetime prediction

eess.SY ·2026-11-17 ·Innocent Izabayo, Haiquan Zhao
top venue similarity 0.57
Abstract · 14 pages, 10 figures. Published in IEEE Transactions on Transportation Electrification, 2026

Accurate and robust estimation of battery state-of-health (SOH) and remaining useful life (RUL) is essential for safe and cost-effective operation of electrified transportation systems, yet it remains challenging under operating variability, non-stationary aging, and non-Gaussian measurement disturbances. This paper proposes Multi-scale Adaptive Robust State Estimation (MARS), a multi-scale adaptive robust state-estimation framework that couples a dual-branch temporal encoder with an equivalent-circuit-model-constrained differentiable generalized-correntropy adaptive Kalman filter. The encoder disentangles fast intra-cycle voltage-current-temperature dynamics from slow inter-cycle degradation, and the fused degradation context adaptively parameterizes the cycle-level process covariance, measurement covariance, and correntropy bandwidth. Through the unrolled robust filtering recursion, MARS performs physics-consistent state propagation and generalized-correntropy-based innovation correction, while uncertainty decomposition and Monte Carlo dropout provide calibrated prediction intervals for SOH estimation and conditional RUL prediction. Experiments on the NASA and CALCE benchmarks demonstrate improved SOH accuracy, achieving mean absolute error/root mean square error values of 0.72%/0.92% and 0.63%/0.80%, respectively, together with competitive conditional RUL performance against representative data-driven and hybrid baselines. The resulting conditional-RUL prediction intervals achieve coverage probabilities of 100.00% and 99.24% on NASA and CALCE, respectively. Ablation, disturbance-sensitivity, near-end-of-life, and runtime analyses further verify the contribution of each module and the practical inference cost for online battery management.

0.45

When voltage sensors fail: Electrochemically constrained fault-tolerant state estimation for flat-plateau LFP batteries

eess.SY eess.SP ·2026-10-05 ·Feng Guo, Luis D. Couto, Hamid Hamed, Khiem Trad, Dong Zhang +3 more
published similarity 0.57
Abstract · Published in Energy Storage Materials, Volume 91 (2026), Article 105553. This is the authors' accepted manuscript. Please cite the Version o…

The flat voltage plateau of lithium iron phosphate (LFP)/graphite cells makes electrochemical-state errors and voltage-measurement abnormalities produce similar innovations, complicating state-of-charge (SOC) estimation. This work proposes an electrochemically constrained residual-bias compensation dual extended Kalman filter (RBC-DEKF) with uncertain-initialization commissioning. A thermal control-oriented parameter-grouped single-particle model (CPG-SPMT) provides paired-electrode dynamics and terminal-voltage prediction, while a separately configurable voltage-discrepancy state accommodates systematic residuals. When the initial SOC is uncertain, residual adaptation is suspended over a verified-healthy startup window. Buffered data support electrochemically constrained trajectory matching, followed by calibrated state replay and residual-channel reactivation. Frozen cross-cycle healthy-residual calibration supports commissioning and remains in the voltage prediction after handover. Evaluation covers 216 additive-bias and 168 multiplicative-gain profiles over 24 A123 temperature-drive-cycle trajectories. Relative to Single-EKF, the original RBC-DEKF reduces mean SOC RMSE from 7.646 to 0.170 percentage points for additive bias and from 22.646 to 0.356 percentage points for gain faults. Separately, 18 nonzero-initial-error profiles on three representative 50%-SOC-anchored segments give a full-record mean SOC RMSE of 1.747 percentage points, including startup, for the commissioned realization, versus 11.192 and 11.400 for the always-on RBC-DEKF and conventional joint EKF. Representative delayed bias, 10-s ramp, and gain tests show that the corrected SOC trajectory remains stable after fault introduction. The central contribution is electrochemically constrained temporal coordination of uncertain-state recovery and subsequent voltage-discrepancy accommodation.

0.66

Robust State-Parameter Estimation in Second-Order Thévenin Batteries

eess.SY math.OC ·2026-11-09 ·Wissam Khennoune, G. Q. Bao Tran, Thach Ngoc Dinh, Jérémy Van Gorp, Mathieu Moze
similarity 0.56
Abstract · Under review for European Control Conference (ECC)

We propose a scheme for estimating the full states and parameters of a second-order Thévenin battery model, using distinct features of the measured current. An identification step, run during suitable rest intervals, identifies the resistances and capacitances of the two RC branches from the voltage relaxation by linear least squares, without knowledge of the open-circuit voltage (OCV) map. An online estimator then runs continuously: the polarization voltages are estimated by open-loop observers; the series resistance is updated at current jumps using least squares; the state of charge (SOC) is propagated by Coulomb counting using the current capacity estimate, and both estimates are updated periodically by a sliding-window regression. We show that the identification is exact under a mild rank condition, that the series resistance is recovered at the first current jump, and that the online state and capacity estimates converge exponentially under verifiable excitation conditions. We also establish robustness of the online estimator under bounded process disturbances and measurement noise.

0.21

Real-Time State-of-Health Estimation and Online Degradation Prognosis from Partial Battery Discharge Using Physics-Informed Neural Networks

cs.LG ·2026-08-14 ·Begoña Ispizua, Serio Gil-López, Leire Arrizabalaga, Ibai Laña
similarity 0.55
Abstract

With the increasing integration of renewable energy sources, energy storage systems have become essential, making the accurate estimation of their State of Health (SOH) and degradation behavior critical. In this work, we propose a physics-informed deep learning approach for lithium-ion battery SOH prediction using incomplete discharge curves extracted from arbitrary voltage ranges, thereby reflecting realistic and heterogeneous operating conditions. The proposed method combines data-driven learning with physically motivated degradation dynamics to ensure consistent and reliable SOH estimation from partial discharge information, achieving a MAPE below 4$\%$. In addition, a real-time degradation trend estimation strategy is introduced to detect key aging transitions without requiring prior knowledge or historical data, making it applicable to a wide range of batteries. Overall, our approach enables SOH estimation from arbitrary discharge segments and a real-time degradation forecast that continuously integrates all usage, overcoming previous methods that rely on fixed protocols or early, non-adaptive predictions.

0.04

Deep Bayesian Filtering for Nonlinear Structural System Identification: A Tutorial on Structural and Physical Inductive Biases

cs.LG cs.CEstat.ML ·2026-10-27 ·Wei Liu, Konstantinos Vlachas, Eleni Chatzi
benchmark similarity 0.55
Abstract

Nonlinear structural system identification remains challenging when governing physics is only partially known and measurements are sparse. Deep Bayesian filtering addresses these challenges by combining learnable dynamical representations with probabilistic state-space models, physical inductive biases, and uncertainty-aware inference. This paper presents, for the first time, a unified tutorial treatment of deep Bayesian filtering for nonlinear structural system identification, connecting model formulation, learning, posterior inference, and evaluation. Amortized variational inference and differentiable Kalman filtering are introduced as complementary strategies within this broader framework. The Deep Markov Model (DMM) provides a data-driven reference, while the Physics-guided Deep Markov Model (PgDMM) and Neural Extended Kalman Filter (Neural EKF) serve as illustrative instances through which methodological choices and their implications are examined. Dynamic state estimation and joint state and parameter estimation are demonstrated on a three-dimensional shear-frame benchmark with hysteretic Bouc-Wen connections and sparse acceleration measurements. The comparative analysis yields new observations concerning the relationships among reconstruction accuracy, predictive fidelity, physical interpretability, and estimation robustness. Physical structure improves latent-state interpretability without necessarily ensuring faithful predictive dynamics, while comparable typical reconstruction accuracy can conceal substantial differences in estimation robustness. These findings motivate practical guidelines for model construction, training, and evaluation that distinguish reconstruction, forecasting, state recovery, and parameter identification. The tutorial concludes by outlining challenges in uncertainty calibration, identifiability, and validation on real structures.

0.27

Neural Kalman Filtering for Unknown Dynamics: Task-Aware Learning with a Koopman Backbone

eess.SP ·2026-09-21 ·Mintaek Oh, Jeonghun Park, Nir Shlezinger, Yonina C. Eldar, Jinseok Choi
hot direction similarity 0.55
Abstract · 13 pages, 6 figures

Recent years have witnessed a growing interest in AI-aided Kalman filters. While emerging methodologies, such as KalmanNet, were shown to facilitate tracking in partially known state-space models, they are not directly applicable when the underlying dynamics is unknown. To overcome this limitation, we extend the KalmanNet philosophy to the unknown-dynamics regime by developing blind Kalman filtering frameworks that learn both the predictor and the correction gain from data, assuming that the state-evolution function and the noise statistics are both unavailable. To this end, we first introduce a task-aware neural Kalman filtering framework, Blind-KalmanNet, which carries the learning principle of the Kalman gain into the prediction step through a two-head neural architecture that jointly learns a state-dependent linear surrogate and the Kalman gain from data. Building on this formulation, we then develop our main framework, Koopman-aided Blind-KalmanNet, which incorporates Koopman operator theory to lift the unknown dynamics into a latent space where the state evolves linearly. The lifted linear predictor integrates seamlessly into the Blind-KalmanNet structure: the pre-trained deep Koopman network serves as a globally structured predictor, augmented by the task-aware residual surrogate and the learned Kalman gain inherited from Blind-KalmanNet. Extensive experiments demonstrate that the proposed frameworks achieve competitive performance against baselines, with Koopman-aided Blind-KalmanNet attaining the best accuracy across all considered settings.

0.33