CS Paper Radar

When voltage sensors fail: Electrochemically constrained fault-tolerant state estimation for flat-plateau LFP batteries

Feng Guo, Luis D. Couto, Hamid Hamed, Khiem Trad, Dong Zhang, Ru Hong, Guangdi Hu, Mohammadhosein Safari

eess.SY eess.SP ·submitted 2026-10-05 07:22 UTC · v1
published

Abstract

The flat voltage plateau of lithium iron phosphate (LFP)/graphite cells makes electrochemical-state errors and voltage-measurement abnormalities produce similar innovations, complicating state-of-charge (SOC) estimation. This work proposes an electrochemically constrained residual-bias compensation dual extended Kalman filter (RBC-DEKF) with uncertain-initialization commissioning. A thermal control-oriented parameter-grouped single-particle model (CPG-SPMT) provides paired-electrode dynamics and terminal-voltage prediction, while a separately configurable voltage-discrepancy state accommodates systematic residuals. When the initial SOC is uncertain, residual adaptation is suspended over a verified-healthy startup window. Buffered data support electrochemically constrained trajectory matching, followed by calibrated state replay and residual-channel reactivation. Frozen cross-cycle healthy-residual calibration supports commissioning and remains in the voltage prediction after handover. Evaluation covers 216 additive-bias and 168 multiplicative-gain profiles over 24 A123 temperature-drive-cycle trajectories. Relative to Single-EKF, the original RBC-DEKF reduces mean SOC RMSE from 7.646 to 0.170 percentage points for additive bias and from 22.646 to 0.356 percentage points for gain faults. Separately, 18 nonzero-initial-error profiles on three representative 50%-SOC-anchored segments give a full-record mean SOC RMSE of 1.747 percentage points, including startup, for the commissioned realization, versus 11.192 and 11.400 for the always-on RBC-DEKF and conventional joint EKF. Representative delayed bias, 10-s ramp, and gain tests show that the corrected SOC trajectory remains stable after fault introduction. The central contribution is electrochemically constrained temporal coordination of uncertain-state recovery and subsequent voltage-discrepancy accommodation.

Comment
Published in Energy Storage Materials, Volume 91 (2026), Article 105553. This is the authors' accepted manuscript. Please cite the Version of Record. Official published version: https://doi.org/10.1016/j.ensm.2026.105553
Journal ref
Energy Storage Materials, Volume 91, 2026, Article 105553
DOI
10.1016/j.ensm.2026.105553

Closest papers

Nearest neighbours by meaning across the whole index.

MARS: Feature-guided physics-informed deep learning for real-time battery health and lifetime prediction

eess.SY ·2026-11-17 ·Innocent Izabayo, Haiquan Zhao
published similarity 0.65
Abstract · 14 pages, 10 figures. Published in IEEE Transactions on Transportation Electrification, 2026

Accurate and robust estimation of battery state-of-health (SOH) and remaining useful life (RUL) is essential for safe and cost-effective operation of electrified transportation systems, yet it remains challenging under operating variability, non-stationary aging, and non-Gaussian measurement disturbances. This paper proposes Multi-scale Adaptive Robust State Estimation (MARS), a multi-scale adaptive robust state-estimation framework that couples a dual-branch temporal encoder with an equivalent-circuit-model-constrained differentiable generalized-correntropy adaptive Kalman filter. The encoder disentangles fast intra-cycle voltage-current-temperature dynamics from slow inter-cycle degradation, and the fused degradation context adaptively parameterizes the cycle-level process covariance, measurement covariance, and correntropy bandwidth. Through the unrolled robust filtering recursion, MARS performs physics-consistent state propagation and generalized-correntropy-based innovation correction, while uncertainty decomposition and Monte Carlo dropout provide calibrated prediction intervals for SOH estimation and conditional RUL prediction. Experiments on the NASA and CALCE benchmarks demonstrate improved SOH accuracy, achieving mean absolute error/root mean square error values of 0.72%/0.92% and 0.63%/0.80%, respectively, together with competitive conditional RUL performance against representative data-driven and hybrid baselines. The resulting conditional-RUL prediction intervals achieve coverage probabilities of 100.00% and 99.24% on NASA and CALCE, respectively. Ablation, disturbance-sensitivity, near-end-of-life, and runtime analyses further verify the contribution of each module and the practical inference cost for online battery management.

0.44

Estimating the Health and State of Charge of Each Cell in a Second-Life Battery System from Field Data

eess.SY ·2026-09-03 ·Martin Cornejo, Julian Meyer-Schwickerath, Juan Victor Sandalinas, Andreas Jossen
benchmark similarity 0.61
Abstract · 35 pages, 9 figures, includes supplementary material (10 pages, 9 supplementary figures, 2 supplementary notes). Code and data: https://doi.…

Effective use of battery storage depends on reliable estimation of its state of health (SOH) and state of charge (SOC). Model-based state estimation requires the open-circuit voltage (OCV) curve, which is typically unknown for second-life batteries. We present a framework that jointly estimates the states and parameters of an equivalent circuit model solely from field operation data, using Gaussian process regression to reconstruct the OCV curve. Applied to a real second-life battery system of 27 modules and 324 cells, it reveals SOH heterogeneity, a systematic SOC imbalance, and two faulty cells, all validated against a reference measurement. We aggregate the cell SOH and SOC to module level and benchmark them against a lumped-module model fitted without the individual cell voltages. The lumped-module model follows the average behavior and cannot capture the limiting cells, overestimating SOH by up to 31% and SOC by up to 23%.

0.27

Koopman-Based Model Predictive Control for Simultaneous State of Charge and Temperature Balancing of Lithium-Ion Cells

eess.SY ·2026-09-07 ·Jihoon Moon
similarity 0.60
Abstract

Cell-to-cell electrical and thermal variations produce nonuniform state of charge (SoC) and temperature distributions in lithium-ion battery packs. This paper proposes a Koopman-operator-based framework for simultaneous SoC and temperature balancing of series-connected cells. Cell-specific Koopman predictors identified using extended dynamic mode decomposition are assembled into neighboring-cell error dynamics that retain heterogeneity and thermal-disturbance effects. A Tikhonov-regularized feedforward controller provides numerically robust compensation without excessive current amplification, while constrained Koopman-based model predictive control (KMPC) regulates the residual errors through a convex quadratic program. Three-cell simulations validate the controller under two consecutive Urban Dynamometer Driving Schedule cycles. KMPC achieves balancing performance comparable to nonlinear model predictive control (NMPC). Relative to the uncontrolled case, KMPC reduces the RMSEs of the neighboring-cell SoC and core temperature differences by 66-81% and 57-76%, respectively, while reducing the computation time per optimization from 0.0259s for NMPC to 0.0028s for KMPC.

0.31

Relative Discharge Stage (RDS) Classification: A Practical Indicator of Battery Discharge Progress

cs.LG ·2026-09-23 ·Khoa Tran, Tri Le, Hung-Cuong Trinh, Hung Tran-Nam
similarity 0.58
Abstract

Accurate remaining discharge time (RDT) prediction is challenging in real-world battery applications because future load profiles are unknown and highly dynamic. To address the uncertainty of continuous RDT regression, this paper introduces Relative Discharge Stage (RDS), a battery-management indicator that represents the remaining discharge condition using five interpretable classes: Normal, Good, Moderate, Low, and Recharge Required. Unlike state of charge (SOC), which reflects the current charge level, RDS characterizes the remaining discharge process without requiring future-current information during inference. A physics-informed RDS classification framework is proposed, combining SOC estimation with lightweight temporal learning. The SOC-estimation component includes second-order ECM state and terminal-voltage prediction, hysteresis and OCV temperature correction, core-temperature estimation, and AEKF state correction, supported by OCV evaluation, online STC-ECM parameter adaptation, and pretrained neural residual-voltage correction. The measured current, terminal voltage, surface temperature, and estimated SOC are arranged into a sliding observation window and processed by a lightweight temporal convolutional network. Experiments on two public lithium-ion battery datasets demonstrate robust RDS classification, with accuracy exceeding 80% under varying load and thermal conditions.

0.04

Recursive Parameter Identification of Nonlinear Stochastic State-Space Models via Sequentialized Ensemble Kalman Inversion

eess.SY ·2026-09-19 ·Farzaneh Barat, Rachel Carter, Sara Wilson, Huazhen Fang
publishedbenchmark similarity 0.57
Abstract · Accepted for publication in the 2026 65th IEEE Conference on Decision and Control (CDC)

Recursive parameter identification in nonlinear stochastic state-space models is challenging because unknown parameters affect the measurements through latent-state dynamics. This paper develops a sequentialized ensemble Kalman inversion method for recursive parameter identification from streaming measurements. The proposed method represents the parameter posterior by an evolving ensemble and updates it sequentially as new measurements become available. For each parameter ensemble member, implicit particle filtering is used to approximate the predictive observation statistics required for parameter correction. This formulation enables recursive parameter learning. The method is evaluated on a strongly nonlinear benchmark, with comparison to several existing methods, and then on a nonlinear double-capacitor lithium-ion battery model. The numerical results demonstrate accurate recursive parameter identification and latent-state estimation.

0.30

System Identification for Nonlinear Stochastic State-Space Models Using Ensemble Kalman Inversion with Application to Lithium-Ion Batteries

eess.SY ·2026-10-19 ·Farzaneh Barat, Rachel Carter, Sara Wilson, Huijeong Kim, Xinfan Lin +1 more
similarity 0.57
Abstract · 16 pages, 8 figures, 3 tables

Nonlinear state-space system identification has attracted decades of interest, yet remains challenging because of the interplay among unknown parameters, nonlinear dynamics, and latent state variables. Its difficulty increases dramatically when the state and parameter dimensions increase. To address this challenge, we develop an ensemble Kalman inversion (EnKI)-based approach. This approach leverages EnKI to perform maximum a posteriori parameter estimation through successive local Gaussian approximations, enabling an iterative and incremental search for unknown parameters. The search combines Monte Carlo sampling with Kalman-type updates to evolve an ensemble of parameter samples, thereby offering empirical stability and the ability to handle strongly nonlinear models. The EnKI search is coupled with state estimation conditioned on the latest parameter estimates. This enables parameter identification along with latent state recovery. To improve scalability for large datasets, we further develop a cascaded EnKI (CasEnKI) method, which assimilates subdatasets sequentially to accelerate computation. We validate the proposed methods using a lithium-ion battery model with ten state variables and 18 unknown parameters. Simulation results show that the EnKI approach offers high identification accuracy and empirical stability in parameter search. Further, experimental results illustrate the computational efficiency and scalability of the CasEnKI method for large battery datasets.

0.12

Robust State-Parameter Estimation in Second-Order Thévenin Batteries

eess.SY math.OC ·2026-11-09 ·Wissam Khennoune, G. Q. Bao Tran, Thach Ngoc Dinh, Jérémy Van Gorp, Mathieu Moze
similarity 0.57
Abstract · Under review for European Control Conference (ECC)

We propose a scheme for estimating the full states and parameters of a second-order Thévenin battery model, using distinct features of the measured current. An identification step, run during suitable rest intervals, identifies the resistances and capacitances of the two RC branches from the voltage relaxation by linear least squares, without knowledge of the open-circuit voltage (OCV) map. An online estimator then runs continuously: the polarization voltages are estimated by open-loop observers; the series resistance is updated at current jumps using least squares; the state of charge (SOC) is propagated by Coulomb counting using the current capacity estimate, and both estimates are updated periodically by a sliding-window regression. We show that the identification is exact under a mild rank condition, that the series resistance is recovered at the first current jump, and that the online state and capacity estimates converge exponentially under verifiable excitation conditions. We also establish robustness of the online estimator under bounded process disturbances and measurement noise.

0.26

Filter-Augmented Reinforcement Learning for Battery Fast Charging with State of Health and Plating-Aware Reward Design

eess.SY ·2026-10-16 ·Meng Yuan, Yang Li, Changfu Zou
similarity 0.56
Abstract

Fast charging of lithium-ion batteries is crucial for electric vehicle adoption, yet it increases safety risks and accelerates battery ageing. To address this, we propose a filter-augmented reinforcement learning (RL) framework for lifelong health-aware fast charging, based on the twin-delayed deep deterministic policy gradient (TD3) algorithm. The RL agent is guided by a reward function that balances charging speed and battery longevity through the incorporation of state of health (SoH) information and an SoH-dependent voltage penalty term derived from a constant--current constant--overpotential charging strategy. Since onboard SoH estimates are inevitably corrupted by noise, two filtering strategies are integrated: an exponential moving average (EMA) filter when noise statistics are unknown, and a Kalman filter when they are available, with the filtered estimate embedded in both the agent's state and reward computation. The RL policy is trained using data from high-fidelity life-cycle simulations. The evaluation uses a published electrochemical and degradation parameterisation for a commercial LG M50 cell. Results show that the proposed method achieves up to 21.4\% more equivalent full cycles (EFCs) than conventional constant current--constant voltage (CC--CV) charging under 2\% SoH estimation noise, and maintains this lifetime advantage even under 5\% noise, while sustaining comparable charging speed.

0.14