CS Paper Radar

System Identification for Nonlinear Stochastic State-Space Models Using Ensemble Kalman Inversion with Application to Lithium-Ion Batteries

Farzaneh Barat, Rachel Carter, Sara Wilson, Huijeong Kim, Xinfan Lin, Huazhen Fang

eess.SY ·submitted 2026-10-19 17:06 UTC · v1

Abstract

Nonlinear state-space system identification has attracted decades of interest, yet remains challenging because of the interplay among unknown parameters, nonlinear dynamics, and latent state variables. Its difficulty increases dramatically when the state and parameter dimensions increase. To address this challenge, we develop an ensemble Kalman inversion (EnKI)-based approach. This approach leverages EnKI to perform maximum a posteriori parameter estimation through successive local Gaussian approximations, enabling an iterative and incremental search for unknown parameters. The search combines Monte Carlo sampling with Kalman-type updates to evolve an ensemble of parameter samples, thereby offering empirical stability and the ability to handle strongly nonlinear models. The EnKI search is coupled with state estimation conditioned on the latest parameter estimates. This enables parameter identification along with latent state recovery. To improve scalability for large datasets, we further develop a cascaded EnKI (CasEnKI) method, which assimilates subdatasets sequentially to accelerate computation. We validate the proposed methods using a lithium-ion battery model with ten state variables and 18 unknown parameters. Simulation results show that the EnKI approach offers high identification accuracy and empirical stability in parameter search. Further, experimental results illustrate the computational efficiency and scalability of the CasEnKI method for large battery datasets.

Comment
16 pages, 8 figures, 3 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Recursive Parameter Identification of Nonlinear Stochastic State-Space Models via Sequentialized Ensemble Kalman Inversion

eess.SY ·2026-09-19 ·Farzaneh Barat, Rachel Carter, Sara Wilson, Huazhen Fang
publishedbenchmark similarity 0.83
Abstract · Accepted for publication in the 2026 65th IEEE Conference on Decision and Control (CDC)

Recursive parameter identification in nonlinear stochastic state-space models is challenging because unknown parameters affect the measurements through latent-state dynamics. This paper develops a sequentialized ensemble Kalman inversion method for recursive parameter identification from streaming measurements. The proposed method represents the parameter posterior by an evolving ensemble and updates it sequentially as new measurements become available. For each parameter ensemble member, implicit particle filtering is used to approximate the predictive observation statistics required for parameter correction. This formulation enables recursive parameter learning. The method is evaluated on a strongly nonlinear benchmark, with comparison to several existing methods, and then on a nonlinear double-capacitor lithium-ion battery model. The numerical results demonstrate accurate recursive parameter identification and latent-state estimation.

0.30

MARS: Feature-guided physics-informed deep learning for real-time battery health and lifetime prediction

eess.SY ·2026-11-17 ·Innocent Izabayo, Haiquan Zhao
published similarity 0.63
Abstract · 14 pages, 10 figures. Published in IEEE Transactions on Transportation Electrification, 2026

Accurate and robust estimation of battery state-of-health (SOH) and remaining useful life (RUL) is essential for safe and cost-effective operation of electrified transportation systems, yet it remains challenging under operating variability, non-stationary aging, and non-Gaussian measurement disturbances. This paper proposes Multi-scale Adaptive Robust State Estimation (MARS), a multi-scale adaptive robust state-estimation framework that couples a dual-branch temporal encoder with an equivalent-circuit-model-constrained differentiable generalized-correntropy adaptive Kalman filter. The encoder disentangles fast intra-cycle voltage-current-temperature dynamics from slow inter-cycle degradation, and the fused degradation context adaptively parameterizes the cycle-level process covariance, measurement covariance, and correntropy bandwidth. Through the unrolled robust filtering recursion, MARS performs physics-consistent state propagation and generalized-correntropy-based innovation correction, while uncertainty decomposition and Monte Carlo dropout provide calibrated prediction intervals for SOH estimation and conditional RUL prediction. Experiments on the NASA and CALCE benchmarks demonstrate improved SOH accuracy, achieving mean absolute error/root mean square error values of 0.72%/0.92% and 0.63%/0.80%, respectively, together with competitive conditional RUL performance against representative data-driven and hybrid baselines. The resulting conditional-RUL prediction intervals achieve coverage probabilities of 100.00% and 99.24% on NASA and CALCE, respectively. Ablation, disturbance-sensitivity, near-end-of-life, and runtime analyses further verify the contribution of each module and the practical inference cost for online battery management.

0.44

Regularised Iterative Generalised Least Squares with Optimal Selection of the Hyper-Parameter for Identifying Nonlinear Phenomenological Models

cs.LG stat.MEeess.SY ·2026-08-19 ·Mark Cary, Charles Bokor
similarity 0.60
Abstract · 18 pages, 5 figures, 2 tables

In some fields currently dominated by empirical approaches, such as state of health (SoH) prediction for lithium-ion batteries, phenomenological models motivated by quasi-physical thinking contain parameters to be estimated from experimental data. Often the structure of such models yields fully or partially confounded parameters, which are difficult or even impossible to estimate reliably. To preserve the desired model formulation and simultaneously improve the numerical conditioning for the problem we introduce a ridge regression scheme. An automated method is provided, based on information theoretic measures of model performance, which optimises the ridge regression hyper-parameter at each iteration. The formulae presented require fixed point iteration to solve for the hyper-parameter. Given a suitable starting value, analysis demonstrates convergence is very rapid. The optimal hyper-parameter selection mechanism is incorporated within an efficient regularised iterative generalised least squares mechanism, capable of fitting both heteroscedastic and serially correlated data as required. Simulation confirms the efficacy of the overall method.

0.35

Estimating the Health and State of Charge of Each Cell in a Second-Life Battery System from Field Data

eess.SY ·2026-09-03 ·Martin Cornejo, Julian Meyer-Schwickerath, Juan Victor Sandalinas, Andreas Jossen
benchmark similarity 0.59
Abstract · 35 pages, 9 figures, includes supplementary material (10 pages, 9 supplementary figures, 2 supplementary notes). Code and data: https://doi.…

Effective use of battery storage depends on reliable estimation of its state of health (SOH) and state of charge (SOC). Model-based state estimation requires the open-circuit voltage (OCV) curve, which is typically unknown for second-life batteries. We present a framework that jointly estimates the states and parameters of an equivalent circuit model solely from field operation data, using Gaussian process regression to reconstruct the OCV curve. Applied to a real second-life battery system of 27 modules and 324 cells, it reveals SOH heterogeneity, a systematic SOC imbalance, and two faulty cells, all validated against a reference measurement. We aggregate the cell SOH and SOC to module level and benchmark them against a lumped-module model fitted without the individual cell voltages. The lumped-module model follows the average behavior and cannot capture the limiting cells, overestimating SOH by up to 31% and SOC by up to 23%.

0.27

Robust State-Parameter Estimation in Second-Order Thévenin Batteries

eess.SY math.OC ·2026-11-09 ·Wissam Khennoune, G. Q. Bao Tran, Thach Ngoc Dinh, Jérémy Van Gorp, Mathieu Moze
similarity 0.58
Abstract · Under review for European Control Conference (ECC)

We propose a scheme for estimating the full states and parameters of a second-order Thévenin battery model, using distinct features of the measured current. An identification step, run during suitable rest intervals, identifies the resistances and capacitances of the two RC branches from the voltage relaxation by linear least squares, without knowledge of the open-circuit voltage (OCV) map. An online estimator then runs continuously: the polarization voltages are estimated by open-loop observers; the series resistance is updated at current jumps using least squares; the state of charge (SOC) is propagated by Coulomb counting using the current capacity estimate, and both estimates are updated periodically by a sliding-window regression. We show that the identification is exact under a mild rank condition, that the series resistance is recovered at the first current jump, and that the online state and capacity estimates converge exponentially under verifiable excitation conditions. We also establish robustness of the online estimator under bounded process disturbances and measurement noise.

0.26

Real-Time State-of-Health Estimation and Online Degradation Prognosis from Partial Battery Discharge Using Physics-Informed Neural Networks

cs.LG ·2026-08-14 ·Begoña Ispizua, Serio Gil-López, Leire Arrizabalaga, Ibai Laña
similarity 0.58
Abstract

With the increasing integration of renewable energy sources, energy storage systems have become essential, making the accurate estimation of their State of Health (SOH) and degradation behavior critical. In this work, we propose a physics-informed deep learning approach for lithium-ion battery SOH prediction using incomplete discharge curves extracted from arbitrary voltage ranges, thereby reflecting realistic and heterogeneous operating conditions. The proposed method combines data-driven learning with physically motivated degradation dynamics to ensure consistent and reliable SOH estimation from partial discharge information, achieving a MAPE below 4$\%$. In addition, a real-time degradation trend estimation strategy is introduced to detect key aging transitions without requiring prior knowledge or historical data, making it applicable to a wide range of batteries. Overall, our approach enables SOH estimation from arbitrary discharge segments and a real-time degradation forecast that continuously integrates all usage, overcoming previous methods that rely on fixed protocols or early, non-adaptive predictions.

0.04

When voltage sensors fail: Electrochemically constrained fault-tolerant state estimation for flat-plateau LFP batteries

eess.SY eess.SP ·2026-10-05 ·Feng Guo, Luis D. Couto, Hamid Hamed, Khiem Trad, Dong Zhang +3 more
published similarity 0.57
Abstract · Published in Energy Storage Materials, Volume 91 (2026), Article 105553. This is the authors' accepted manuscript. Please cite the Version o…

The flat voltage plateau of lithium iron phosphate (LFP)/graphite cells makes electrochemical-state errors and voltage-measurement abnormalities produce similar innovations, complicating state-of-charge (SOC) estimation. This work proposes an electrochemically constrained residual-bias compensation dual extended Kalman filter (RBC-DEKF) with uncertain-initialization commissioning. A thermal control-oriented parameter-grouped single-particle model (CPG-SPMT) provides paired-electrode dynamics and terminal-voltage prediction, while a separately configurable voltage-discrepancy state accommodates systematic residuals. When the initial SOC is uncertain, residual adaptation is suspended over a verified-healthy startup window. Buffered data support electrochemically constrained trajectory matching, followed by calibrated state replay and residual-channel reactivation. Frozen cross-cycle healthy-residual calibration supports commissioning and remains in the voltage prediction after handover. Evaluation covers 216 additive-bias and 168 multiplicative-gain profiles over 24 A123 temperature-drive-cycle trajectories. Relative to Single-EKF, the original RBC-DEKF reduces mean SOC RMSE from 7.646 to 0.170 percentage points for additive bias and from 22.646 to 0.356 percentage points for gain faults. Separately, 18 nonzero-initial-error profiles on three representative 50%-SOC-anchored segments give a full-record mean SOC RMSE of 1.747 percentage points, including startup, for the commissioned realization, versus 11.192 and 11.400 for the always-on RBC-DEKF and conventional joint EKF. Representative delayed bias, 10-s ramp, and gain tests show that the corrected SOC trajectory remains stable after fault introduction. The central contribution is electrochemically constrained temporal coordination of uncertain-state recovery and subsequent voltage-discrepancy accommodation.

0.67

PhyMamba: Physics-Modulated Mamba for Robust Battery Health Prognostics

cs.LG eess.SY ·2026-08-28 ·Sara Sameer, Yunyi Zhao, Wei Zhang, Minggang Zeng, Wenqing Li +2 more
similarity 0.57
Abstract

Battery health prognostics is a core function in battery management systems (BMSs), yet long-horizon health forecasting from BMS signals remains challenging due to operating-condition dependency and sensor noise. In this paper, we propose PhyMamba, a two-stage physics-modulated Mamba framework that integrates electrochemical aging into sequence modelling. PhyMamba does not require explicit identification of internal aging parameters, which often relies on intrusive measurements. In stage-1, a lightweight Mamba encoder first processes BMS signals and produces a latent representation that is transformed via an aging parameterization module, into physics-informed aging features. In stage-2, a customized Mamba forecasting backbone performs multi-cycle prediction, where physics is tightly integrated to regulate the model's internal temporal updates toward degradation-consistent evolution. Experiments on three public datasets under multiple forecast horizons show that PhyMamba achieves the best aggregated performance, with an overall mean error reduction of 31.8% compared with a diverse range of baselines. PhyMamba also offers an optimized accuracy-efficiency trade-off, which supports practical deployment for robust battery health prognostics.

0.17