CS Paper Radar

Distributed Cooperative Control with Prescribed Performance of BESSs with A Unified Discharge Constrain for Power Allocation under Dynamic Load

Yalin Zhang, Zhongxin Liucand Fuyong Wang, Zengqiang Chen

eess.SY ·submitted 2026-09-19 08:45 UTC · v1
publishedhot direction

Abstract

Battery energy storage system (BESS) is integrated into the smart grid to enhance scalability, economy, and greenery. And the State-of-Charge (SoC) balance is one of the basic problems of BESSs, which can maximize the utilization of capacity. BESSs with a unified relative variation rate for SoC can be simultaneously filled or empty, while real-time estimation schemes of SoC balance and power sharing states are required in this power allocation scheme. Therefore, the prescribed performance control (PPC) method is applied in this paper to design two distributed estimators based on multi-agent systems (MASs), in order to estimate the power sharing and SoC balance states in real-time under dynamic load driving. In this way, these two average values can ultimately be well estimated with almost zero error performance, and dynamic performance and steady-state performance of the two estimators can be adjusted by different parameters. Similarly, consensus performance and dynamic tracking performance are decoupled. These results provide a broader range for the selection of gains. To verify the effectiveness, robustness and progressiveness of the designed estimators, some cases with a resistance network containing 4 BESSs as load distribution are designed and discussed. Further more, to test scalability, a large-scale system containing 12 BESSs is conducted to the designed scheme.

DOI
10.1080/00207721.2025.2534901

Closest papers

Nearest neighbours by meaning across the whole index.

Design of Economic Dispatch Schemes of An Isolated BESS Network Based on Distributed Discrete-time PI+Rest Consensus

eess.SY ·2026-09-17 ·Yalin Zhang, Zhongxin Liu, Zengqiang Chen
published similarity 0.69
Abstract

Battery energy storage systems (BESSs) are widely integrated into smart grids. For an isolated BESS network, however, capacity degradation and power loss of battery units increase operating costs. To alleviate this problem, two distributed economic dispatch (ED) schemes with discrete-time dynamics are developed in this paper, thus obtaining the optimal output power vector and ensuring supply-demand balance while considering dynamic line loss and capacity constraints. It is worth mentioning that proportional-integral protocols with reset mechanisms (PI+R protocols) are introduced into these schemes which can greatly improve the consensus rate and control accuracy. Specifically, a marginal cost (MC) consensus controller and an average power mismatch estimator are the core components of each scheme, where these two are coupled to each other. In this regard, the difference between the two schemes is that for the MC consensus controllers, one involves incorporating the estimated average power mismatch feedback term into the closed-loop system error to design the PI+R protocol, while the other does not. In addition, regarding to each PI+R protocol, the integral term is reset to 0 when the proportional term experiences zero crossing, in order to accelerate the convergence rate and reduce overshoot. The effectiveness, conditions under which the reset mechanism works, and stability of these schemes are all well analyzed. Finally, some simulation cases are designed and compared with an existing solution. From the simulation results, it can be seen that the designed second scheme greatly improves the performance of the previous scheme in consensus rate, convergence rate, BESS/agent plug and play, load switching, and wide area system application.

0.47

Distributed Economic Dispatch Scheme of A BESS Network with A Switching Utility Grid in Energy Internet Paradigm via Reset Consensus Method

eess.SY ·2026-10-11 ·Yalin Zhang, Zhongxin Liu, Yulin Chen, Donglian Qi, Zengqiang Chen
published similarity 0.67
Abstract

This article aims to design a distributed economic dispatch (ED) scheme based on marginal cost (MC) consensus for a battery energy storage system (BESS) network considering the utility grid switching. Due to the low control accuracy and slow convergence speed of previous schemes, some important changes have been made in this article. Firstly, the feedback coupling term is introduced into the closed-loop error to further improve the stability and convergence rate of the controller. Then, a proportional integral (PI) controller with a reset mechanism is implemented in the designed scheme, which improves the speed and control accuracy of MC consensus. The performance of a control system with a reset mechanism is well guaranteed by analyzing the eigenvalues of the corresponding matrix. Finally, some tests focus on UG switching, time phased pricing, load switching, a BESS/agent plug and play, and large-scale system applications to illustrate the effectiveness and progressiveness of the design scheme.

0.13

Distributed Multiconsensus Control of BESSs Based on Centrality of Eigenvectors

eess.SY ·2026-09-18 ·Yalin Zhang, Zhongxin Liu, Zengqiang Chen
publishedhighly cited similarity 0.65
Abstract

Secondary control and the State-of-Charge (SoC) balance control are important control objectives for battery energy storage systems (BESSs). In this brief, a communication weight allocation method based on the centrality of eigenvectors is designed for a connected and directed graph, which results in the adjacency matrix having a given eigenvector. Subsequently, a distributed secondary voltage controller and an SoC balancing controller are designed for droop-controlled BESSs to achieve voltage leader-following multiconsensus and SoC balancing, respectively. It is worth mentioning that under the designed voltage secondary control scheme, only a single leader is needed to achieve voltage multiconsensus control. In addition, the capacity information/droop coefficient does not need to be transmitted in the communication network to achieve power sharing according to capacity and SoC balance. For SoC balance control, the control gain is also well analyzed to ensure stability. The relevant simulations verify the effectiveness of the designed scheme.

0.68

Communication Delay Robust Control of BESS for AI Training Load Smoothing

eess.SY ·2026-09-18 ·Xue Lyu, Wei Du, Sheik Mohammad Mohiuddin, Brett A. Ross
hot direction similarity 0.62
Abstract · 10 pages, 17 figures

AI training loads can exhibit rapid power fluctuations because their power demand differs significantly between computational and communication phases, creating challenging ramp rates at the data center point of common coupling (PCC). Integrating battery energy storage systems (BESS) in data centers is a promising mitigation option. This paper proposes a hybrid BESS control strategy that combines droop-based grid-forming (GFM) control with instantaneous load current-based compensation to suppress high frequency load fluctuations. The GFM control loop regulates the long-term power exchange of the BESS, while the load-following control provides fast compensation for short-term AI workload fluctuations. Communication delay between the load current measurements and the BESS controller is explicitly modeled, and its impact on smoothing performance is analyzed. To mitigate delay-induced degradation, a predictor-based compensation method is incorporated into the BESS control structure. High-fidelity electromagnetic transient simulations are conducted to validate the proposed approach. Results demonstrate effective smoothing of AI training load fluctuations across different grid strength conditions and under time varying communication delays.

0.28

A Distributed Step-by-step Finite-time Consensus Design for Heterogeneous Battery Energy Storage Devices with Droop Control

eess.SY ·2026-09-18 ·Yalin Zhang, Yunzhong Song, Shumin Fei
publishedhot directionhighly cited similarity 0.62
Abstract

As all generators are distributed in different areas among large scale power systems, the cooperative manipulation of the multi-generator system cannot be done well without consideration of the distance information of the generators, A distributed step-by-step finite-time consensus scheme for the heterogeneous Battery Energy Storage System (BESS) is proposed in this paper, where the coordinated consensus can be come into reality within a limited time, which is appealing for the electrical engineering community. To be concrete, at first, all BESSs are classified into several clusters according to their locations, and in each cluster, there is an active leader in charge of information receiving from outside. Then after, in order to coordinate the multi BESSs, five inputs, which are function oriented, were used to achieve energy level balancing, active/reactive power sharing, and voltage/frequency synchronization of the multi BESSs. To be further, the frequency and voltage restoration to the nominal values of the main grid was made possible by the introduction of a virtual leader, which is actually an external leader. Compared with the centralized methods, this control scheme is entirely distributed, and each BESS only utilizes the information of its own and its neighbors. Besides, this control is robust to the load perturbation and the plug-and-play of the communication topology. Finally, some simulation experiments are executed on the modified IEEE 57-bus system to verify the suggested scheme.

0.70

Grid-Mode-Aware Model Predictive Control of Hybrid Energy Storage Systems for AI Data Center Power Smoothing

eess.SY ·2026-09-03 ·Xin Chen
similarity 0.60
Abstract

To facilitate the grid-friendly integration of highly variable AI data center loads, this paper proposes a grid-mode-aware model predictive control (G-MPC) framework for managing a hybrid energy storage system (HESS) to smooth grid-side power demand. The framework optimally coordinates a battery energy storage system (BESS) and a supercapacitor (SC) by solving a multi-step optimization problem in a receding-horizon manner. In particular, band-pass filter dynamics are directly embedded in the G-MPC formulation to extract and suppress grid-side power components associated with vulnerable grid oscillatory modes, thus mitigating load-induced grid oscillations. The resulting G-MPC optimization jointly minimizes violations of grid-side power-envelope, ramp-rate, and modal-power requirements and the degradation and power-ramping costs of the BESS and SC, while satisfying power limits, state-of-charge limits, and other operational constraints. To enable real-time implementation, a fix-and-re-optimize algorithm is developed to solve each G-MPC problem efficiently while preventing simultaneous charging and discharging. Extensive simulations demonstrate the effectiveness, flexibility, and computational efficiency of the proposed framework. The results also highlight the importance of explicitly suppressing power components associated with vulnerable grid modes, rather than merely reducing overall load variations, to effectively mitigate grid oscillations.

0.40

Optimal Coordination of Heat Pump Demand Flexibility and Battery Energy Storage Considering the Operation of Distribution Networks

eess.SY ·2026-10-06 ·Gustavo L. Aschidamini, Guilherme S. Castiglio, Mariana Resener
similarity 0.58
Abstract

Electrifying space heating with heat pumps (HP) and backup electric-resistance heaters (ERH) is incentivized to support decarbonization but increases voltage and thermal issues in distribution networks. Direct load control (DLC) of smart thermostats (ST) provide grid support, yet, to the best of our knowledge, existing methods do not co-optimize this flexibility with grid-scale battery energy storage systems (BESS) and voltage-regulation devices, and do not use ERH for preheating, limiting peak demand reduction and undervoltage mitigation. We propose a mixed-integer linear programming (MILP)-based model predictive control (MPC) framework that coordinates ST setpoints for preheating and setback, grid-scale BESS, on-load tap changers, switched capacitor banks, and step voltage regulators. The framework is evaluated on 23-node and 733-node distribution networks, including a real-data-based feeder, across multiple realized days. On the 23-node feeder with 50% HP penetration and 50% DLC participation, the proposed framework reduces the feeder peak by 23.1%, and by 27.1% with the co-optimized BESS. Rolling-horizon setpoint optimization contributes 6.5 percentage points beyond a day-ahead ST schedule (16.6%), and dispatching the ERH for preheating adds 2.7 percentage points beyond backup-only operation (20.4%). On the 733-node feeder, where thermal congestion is the binding constraint, the framework reduces overloaded branches by 94% and overloaded transformers by 47%. These results demonstrate the potential of coordinated demand flexibility and voltage regulation to accommodate heating electrification.

0.12

Supporting Data Center Grid Integration via Co-Optimized Battery Energy Storage Sizing and Capacity Allocation

eess.SY math.OC ·2026-11-06 ·Wei Wang, Himanshu Sharma, Thiagarajan Ramachandran
similarity 0.58
Abstract

Interconnecting large data centers can be delayed by grid requirements on demand flexibility, ramping limits, and ride-through performance. This paper proposes an optimization-based framework to size a Battery Energy Storage System (BESS) that accelerates data center grid integration by providing BESS capacity required to meet selected flexibility and grid-support requirements. The model co-optimizes BESS power rating and energy capacity while allocating capability across three services: (i) demand response over a specified duration, (ii) mitigation of high-magnitude, high-frequency load fluctuations through reserved active power with zero net state-of-charge change, and (iii) voltage support via reactive power capability at the point of common coupling. Minute-level operational scheduling enforces state-of-charge feasibility and load ramp constraints, and incorporates a controllable queue of delay-insensitive computing tasks to enhance flexibility. A case study using a real data center load profile demonstrates the proposed method and quantifies the BESS power-energy requirements and operational trade-offs needed to satisfy the multi-service constraints, providing practical guidance for interconnection planning and deployment.

0.05