CS Paper Radar

SimSkip: StrongARM-Comparator Similarity Sensing with SAR-Skipping-Aware Training for Analog Compute-in-Memory

Yufei Liu, Junjie Wang, Shuang Liu, Yang Wang, Yang Liu

cs.AR ·submitted 2026-09-21 08:47 UTC · v2

Abstract

Analog-to-digital conversion dominates the energy and area of analog compute-in-memory (CIM) accelerators. This paper presents SimSkip, a successive-approximation-register (SAR) skipping scheme that combines a lightweight StrongARM-comparator similarity detector with SAR-skipping-aware training. When two held voltages are similar, the upper bits of the preceding code are reused to skip SAR comparisons. Detector-induced disturbance extracted from 55-nm CMOS simulations and bit-exact prefix saturation are embedded in the forward pass, and the network learns to tolerate them through quantization-aware training and knowledge distillation. On an ISAAC-based W4A4 WRN-28-10, SimSkip achieves 77.23% CIFAR-100 top-1 accuracy (mean of three seeds) versus 78.4% for the baseline, while reducing SAR comparisons by 48.2% across three hardware-modeled layers. A first-order model estimates a 27.2% net ADC energy reduction after detector overhead.

Comment
5 pages, 6 figures, 3 tables. Submitted to the IEEE International Symposium on Circuits and Systems (ISCAS) 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Enabling Retraining-Free Accurate Inference in Analog Compute in Memory Accelerators

cs.AR cs.LG ·2026-11-05 ·George Karfakis, Puneet Gupta
similarity 0.63
Abstract · 21 pages, 18 figures, 11 tables

Analog compute-in-memory (CIM) accelerators compute matrix-vector products directly inside memory arrays, eliminating weight movement and promising order-of-magnitude gains in inference efficiency. However, converter and device errors make pretrained models unusable on these arrays, and hardware-aware retraining is costly. We enable retraining-free, accurate inference of pretrained models on simple analog arrays with low-cost, shared calibration. Our key observation is that analog error depends on how each layer is represented on the array, and that this representation can be changed offline without changing the computation. We center the inputs and apply Hadamard rotations designed for analog arrays, which keep shared reference errors spread and confine input mixing to each array. Across CNNs, vision transformers and LLMs up to 14B parameters on PCM and ReRAM, the method brings vision models and larger LLMs within a few points of floating-point accuracy and matches or approaches published hardware-aware training without training any weights. On ReRAM with 6-bit ADCs, it restores ViT-B/16 from 37.4% to 82.9% and Phi-4 from 27.0% to 72.2%, both within 2.2 points of floating-point accuracy.

0.25

Hardware-Aware Deployment of Joint SAR Compression and Despeckling on FPGA

eess.IV cs.LG ·2026-08-11 ·Cédric Léonard, Francescopaolo Sica, Martin Schulz
code/data similarity 0.59
Abstract · Submitted to IEEE Transactions on Geoscience and Remote Sensing (TGRS). 11 pages, 8 figures, 4 tables

Next-generation Synthetic Aperture Radar (SAR) missions will generate data far faster than they can downlink, making onboard data reduction essential for near-real-time Earth observation. Learned Image Compression (LIC) offers better rate-distortion performance than handcrafted codecs used operationally today, and recent work shows that simultaneously despeckling and compressing SAR imagery enables better representation capacity while unlocking higher compression rates. These methods, however, have yet to be confronted with the strict power, compute, and operational constraints of spaceborne systems. In this work, we bridge this gap by deploying a joint SAR Despeckling and Data Compression (DDC) framework on an embedded ZCU102 FPGA-based platform, introducing model adaptations that respect the accelerator's fixed-point arithmetic and limited set of supported operations. We evaluate four model topologies across precision levels and across CPU, GPU, and FPGA platforms, revealing several findings with direct design implications. We find that replacing conventional GDN activation functions with plain ReLU improves quality on SAR, suggesting that design principles established for compression of natural images do not necessarily transfer to SAR imagery. In addition, we demonstrate that residual blocks offer little representational benefit for ten times the compute, and show that the FPGA is the most energy-efficient of the platforms tested. Together, these results set a functioning edge deployment workflow and an evidence-based starting point for onboard SAR compression. The code is available at https://github.com/CedricLeon/SAR_DDC_FPGA.

0.32

You Only Charge Once 2.0 : A End-to-End Analog Computing-in-Memory Architecture with Reconfigurable Switched Capacitors

cs.AR ·2026-08-11 ·Zihao Xuan, Yewen Li, Jia Chen, Wei Xuan, Xiao Huo +1 more
similarity 0.59
Abstract · 13 pages, 19 figures

Analog Computing-in-Memory (ACiM) accelerates deep neural networks by keeping weights inside memory arrays and executing dot products in the analog domain. However, modern ACiM accelerators are often limited by the "ADC wall": analog-to-digital converters consume a large fraction of energy and area, while bit-sliced execution repeatedly invokes these converters. Existing designs reduce this cost with low-resolution readout or time multiplexing, but they either lose output fidelity or introduce serialization overhead. Charge-CIM addresses this bottleneck by using switched-capacitor charge redistribution as a unified computing and conversion substrate. The same capacitor fabric performs input conversion, analog MAC, weighted shift-and-add, and readout quantization, reducing both standalone converter overhead and intermediate ADC invocations. A differential readout path further combines paired partial sums during ADC quantization, providing a highly compact and energy-efficient solution for array integration. With dataflow architecture support, we evaluated Charge-CIM on a suite of DNN benchmarks, from CNNs to Transformer models, and experimental results show that Charge-CIM reduces ADC energy by 91.7% under our evaluation setup and improves energy efficiency by 2.7x and throughput by 2.0x compared to the state-of-the-art charge-domain CIM accelerator.

0.10

RE-CAM: Readout-Enhanced Content-Addressable Memory for Quantitative Similarity Search

cs.AR cs.ETcs.LG ·2026-11-19 ·Yi-Chun Liao, Dongyoung Lee, Jiazheng Chen, Tergel Molom-Ochir, Tomohisa Kawakami +5 more
similarity 0.59
Abstract

Similarity search is essential to many applications but incurs massive data movement when executed on conventional architectures. Content-addressable memory (CAM) is a promising hardware substrate, as it allows similarity search directly in the CAM array, minimizing data movement and offering both low latency and high energy efficiency. However, conventional CAM array readout produces only binary match results, discarding quantitative similarity information that could be further exploited. Extracting this information requires interpreting the CAM array output voltage that evolves during a CAM search, making the sensing timestamp a crucial design variable alongside the reference voltage and decoding parameter. In this work, we propose RE-CAM, a readout enhancement framework for CAM that is agnostic to memory technology and application, enabling CAM array readout to approximate linear and nonlinear functions with one CAM search. By reusing the comparators to sense the time-varying output voltage multiple times, jointly optimizing the three design variables under system constraints and hardware nonidealities, and co-designing the optimization algorithm and reconfigurable hardware, RE-CAM achieves accurate approximation with low energy and area overhead without introducing a readout throughput bottleneck. Across linear, piecewise-linear, sigmoid, and exponential functions, RE-CAM reduces normalized root mean square error by 10.89% to 24.34% for general approximation and 29.43% to 46.73% when exploiting dataset distribution, compared to a shared uniform-reference ADC baseline with the same comparison budget. Relative to the same baseline, RE-CAM also achieves $8\times$ higher search throughput while reducing energy per search and area by 47% and 39%, respectively.

0.29

IMC-CLINIC: Coupled Loss-Informed Newton Iterations for Clipping in Analog In-Memory Computing

cs.AI ·2026-09-28 ·Yung-Chin Chen, Chia-Yu Chen, Naveen Verma
similarity 0.58
Abstract

Analog in-memory computing (IMC) offers a promising path toward energy-efficient large language model (LLM) inference by executing matrix multiplications (MatMul) directly within memory arrays in the analog domain. Its efficiency, however, comes with an additional source of error: limited-precision analog-to-digital converters (ADCs) quantize accumulated analog partial sums, introducing output-side error distinct from conventional activation and weight quantization at the MatMul inputs. Clipping can mitigate both operand and ADC quantization errors, but the optimal clipping factors must jointly balance activation rounding and clipping, weight rounding and clipping, and ADC quantization. Existing clipping methods, designed for digital quantization, do not explicitly optimize these coupled sources of IMC error and often rely on costly search-based calibration. We introduce IMC-CLINIC (Coupled Loss-Informed Newton Iterations for Clipping), a clipping calibration framework based on an analytical surrogate for IMC MatMul output error. The surrogate jointly models operand quantization, accumulated clipping-induced bias, and ADC quantization, enabling efficient evaluation of its gradient and approximate curvature from a small calibration set. IMC-CLINIC jointly optimizes activation and weight clipping factors using a safeguarded Newton-type method. Across multiple models and datasets, it improves average zero-shot accuracy by 6.5-11.5 percentage points over the grid search baseline while reducing calibration time by factors of 10.0-12.1. Its analytical surrogate closely tracks empirical IMC output error, and its optimizer is certified within 1% of the global optimum under the loss objective across all projections on two representative models.

0.53

SMART-AIMC: Sensitivity-Aware Mixed ADC Resolution with Fine-Grained Tunability for Analog In-Memory Computing

cs.AR cs.AI ·2026-11-01 ·Yung-Chin Chen, Ourania Stouraiti, Naveen Verma
similarity 0.58
Abstract

Analog In-Memory Computing (IMC) is a promising paradigm for accelerating GEMM-based AI workloads by executing computations directly within the memory array in the analog domain. While IMC delivers substantial energy and throughput improvements, it can suffer from significant task accuracy degradation due to analog-to-digital converter (ADC) quantization noise, which occurs at the GEMM output and is thus different from weight/activation quantization, which occurs at the GEMM input. Mixed ADC resolution allows IMC modules to choose between high- and low-resolution ADC modes with different energy costs, offering a compelling accuracy-energy trade-off. However, selecting ADC resolutions across IMC units while respecting hardware granularity constraints remains challenging. In this paper, we propose SMART-AIMC, a Sensitivity-aware Mixed ADC Resolution framework with fine-grained Tunability for Analog In-Memory Computing. SMART-AIMC correlates the algorithmic task loss to hardware ADC quantization noise in the form of an ADC Channel Sensitivity (ACS) metric. Using this metric, SMART-AIMC systematically, and in a disciplined manner, allocates ADC resources to critical computations. Furthermore, we introduce a sensitivity-based channel reordering scheme that overcomes the hardware granularity constraints with no runtime overhead and approaches the optimal ADC quantization possible for the model. Evaluated across diverse workloads, SMART-AIMC unlocks a superior accuracy-energy Pareto frontier, providing (1) higher task accuracy at matched energy budgets and (2) fine-grained tuning across efficiency targets, from aggressive energy savings to near-digital inference accuracy. At the latter operating point, SMART-AIMC achieves $6.99\times$ higher modeled system-level energy efficiency for linear projections than the INT8 digital baseline with negligible accuracy degradation.

0.23

Beyond Noise: Understanding and Overcoming Temperature Effects in Analog DNN Inference

cs.LG ·2026-09-14 ·Niklas Summ, Xiao Wang, Hendrik Borras, Bernhard Klein, Holger Fröning
published similarity 0.58
Abstract · Published at the ECML PKDD Conference 2026, at the 7th Workshop on IoT, Edge, and Mobile for Embedded Machine Learning

The energy efficiency of analog computing makes it one of the most promising candidates for deploying resource-intensive machine learning workloads on constrained platforms such as mobile and embedded devices. However, analog accelerators are inherently susceptible to noise and non-idealities arising from physical component variations, whose behavior is further sensitive to environmental factors. These effects can significantly degrade inference accuracy. In this work, we conduct a comprehensive experimental study on a representative example of analog hardware to investigate the impact of temperature. We first characterize the behavior of stochastic and systematic non-idealities across a range of operating temperatures. Following this, we compare a set of simulation-based and hardware-based mitigation strategies aimed at improving robustness against temperature-induced performance degradation. Our results suggest that temperature-induced degradation is driven primarily by systematic non-idealities rather than stochastic noise alone. Noise-aware training improves robustness, while hardware-in-the-loop training and temperature-aware calibration provide the strongest accuracy retention across varying thermal conditions.

0.41

ReCIM-HD: A 40 nm On-Device Learning Accelerator with Hyperdimensional Computing via Importance-Based Hybrid Digital-ReRAM CIM

cs.AR cs.ET ·2026-11-18 ·Keming Fan, Chang Eun Song, Soumil Jain, Weihong Xu, Gopabandhu Hota +7 more
similarity 0.57
Abstract · ESSERC'26

ReCIM-HD is an on-device learning (ODL) accelerator that integrates gradient-free hyperdimensional computing (HDC) with resistive RAM (ReRAM)-based analog compute-in-memory (CIM). ReCIM-HD introduces three key techniques: (1) ultra-low-power HDC-based edge ODL without costly back-propagation operations; (2) non-volatile ReRAM-based storage for class hypervectors and CIM similarity search, enabling energy-efficient inference and power-gating during idle periods without data loss; and (3) a hybrid digital-analog CIM inference flow that protects a small accuracy-critical subset digitally to preserve accuracy. Additionally, it employs a Kronecker HD encoder (KE) to reduce encoding overhead and a customized instruction set architecture (ISA) to support flexible programmability. Fabricated in 40 nm, ReCIM-HD achieves 44.17 TOPS/W (hybrid mode) and 75.8 TOPS/W (ReRAM CIM mode), delivering up to 20.1x higher energy efficiency than the state-of-the-art accelerator.

0.19