CS Paper Radar

Zephyron: Integrated Design and Analytical Evaluation of a Solar-Assisted Mobile Manipulator for Multimodal Environmental Reconnaissance and Distributed Visual Inference

Sabik Bin Sultan, Shafi Bin Sultan, Safwan Sadad

cs.RO ·submitted 2026-09-22 05:28 UTC · v1

Abstract

Environmental reconnaissance needs mobile platforms that carry sensors, preserve measurement context, and return interpretable evidence under limited energy and communication. We present a literature-informed engineering design for Zephyron, a four-wheel rover with a front manipulator, environmental sensors, distributed computer vision, local recording, and a raised rear solar module. The design keeps the prototype layout but replaces unsupported numerical assumptions with an explicit component and geometry baseline. A reproducible search retrieved 5,000 records (4,858 unique) for screening, followed by targeted review of primary literature and manufacturer documentation. The baseline uses 165 mm wheels, a 12 kg mass budget, a 72 Wh battery-energy basis, and a 20 W photovoltaic module. With rolling-resistance coefficient 0.04, steady ascent of a 10 degree grade needs about 0.517 N m per wheel under equal load sharing. An illustrative 40 W motion load gives 1.44 h from 57.6 Wh usable energy, and a 25 percent driving duty gives 4.19 h without solar input; these are calculated scenarios, not measured performance. Sensor models show how integration time, calibration, temperature, and communication delay constrain interpretation, and a quality-aware stop-and-sample policy links these constraints to mission execution. Lightweight detectors, reference-based sensor learning, and executable data-integrity checks define a reproducible machine-learning evaluation pathway. The contribution is a traceable design and evaluation framework with editable 3D models, subsystem diagrams, and reproducible analytical data. Experimental validation is required before assigning payload, endurance, detection, or field-operating ratings.

Closest papers

Nearest neighbours by meaning across the whole index.

Integrated Design and Reproducible Feasibility Analysis of a Four-Wheel Rover with Packet-Commanded Imaging, LiDAR Ranging, and Learning-Assisted Target Recognition

cs.RO ·2026-10-27 ·Sabik Bin Sultan, Shafi Bin Sultan, Safwan Sadad, Aranya Abeer Khan Prapya, Maria Sultan
benchmark similarity 0.71
Abstract · Research Manuscript for NASA HERC 2027

This study develops an integrated, reproducible design assessment for a four-wheel educational rover intended for the high-school remote-control division of the 2027 NASA Human Exploration Rover Challenge. The architecture combines commercial differential drive control, independently sprung wheel carriers, separate drive and task batteries, and a Raspberry Pi-based subsystem that executes received imaging and ranging commands. The analysis reconciles component lists with dimensioned computer-aided design views, derives mobility and electrical constraints, and connects sensor geometry to command execution. At the estimated mass of 10.919 kg, a 215 mm wheel rotating at 200 RPM produces a theoretical rolling speed of 8.105 km/h; consequently, the nominal motor label does not establish compliance with an 8 km/h design ceiling. A steady 20-degree climb requires at least 1.255 newton-meters per wheel under an assumed rolling-resistance coefficient of 0.10 and equal torque sharing. At 50 ft, an ideal 12-inch feature spans approximately 71 pixels across a full-resolution Camera Module 3 Standard image, while a 1-degree pointing error displaces the ranging ray by approximately 266 mm. An executed synthetic benchmark compares color-geometry rules and two linear support-vector classifiers on 2,400 generated board crops with scene-disjoint evaluation. A separate reference command executor is checked using mocked hardware. These software results and analytical sensitivities support a testable development plan; the study does not report physical rover trials. The principal contribution is a traceable connection between component choices, failure mechanisms, quantitative design limits, and reproducible verification tasks.

0.18

A3P5 NEMESIS Integrated Rover Design for Environmental Reconnaissance and Robotic Sampling with Reproducible Mobility Analysis and an External Data Machine Learning Calibration Benchmark

cs.RO ·2026-09-16 ·Shafi Bin Sultan, Sabik Bin Sultan, Safwan Sadad
benchmark similarity 0.65
Abstract

A3P5 NEMESIS is a four-wheel rover intended to combine remote inspection, environmental observation and lightweight manipulation within one serviceable platform. This study develops a photo-constrained geometric reconstruction, a subsystem architecture and a reproducible analytical assessment while distinguishing physical prototype evidence from proposed functions. An exploratory search retrieved 5,000 bibliographic records across ten queries, yielding 4,897 distinct DOI records and 1,212 metadata candidates; selected primary studies and technical documents informed the design. The reconstructed configuration retains the carbon-pattern enclosure, independently steered wheel assemblies, folded manipulator, inclined camera mast and side sampling equipment. A declared 24 kg scenario predicts 3.28 newton-metres of gearbox-output torque per wheel on a 20-degree grade under equal load sharing; a separate static model shows how a 2 kg forward payload reduces the geometric front-tipping bound from 38.1 degrees to 32.7 degrees. These are design screens, not measured operating limits. A public-data calibration benchmark uses 7,344 eligible hourly observations, eight sensor/environmental predictors and chronological training, validation and test partitions. Validation-selected ridge regression achieves a held-out CO root-mean-square error of 0.502 milligrams per cubic metre, with a 95% daily-block bootstrap interval of 0.435-0.569 milligrams per cubic metre. This result concerns an external sensor array and cannot establish NEMESIS accuracy. The combined analysis identifies priority measurements, proposed control interfaces and mission-specific validation requirements. The contribution is a traceable engineering design study and evaluation framework for a prototype whose integrated field performance remains to be established.

0.27

ALFRED: Requirement-driven development of an open-source mobile manipulator for long-term plant monitoring

cs.RO cs.ARcs.CV ·2026-10-01 ·Ciarán Miceal Johnson, Christopher Quail, Garry Ellard, Alistair McConnell, Steve Tonneau +1 more
code/data similarity 0.60
Abstract · 36 pages, 19 figures

Tracking seasonal change in crops and forests requires observing the same plants repeatedly. Ground robots can do this at close range, and a manipulator gives their sensors more viewpoints. Yet the robots behind long-term field datasets are rarely released with their design files, and how a robot's own structure limits arm reach and occludes its sensors is seldom compared between builds. We present ALFRED, an open-source mobile manipulator built from commercially available components. It carries a six-degree-of-freedom arm, LiDAR, RGB-D cameras, RTK GNSS and an IMU on an Ackermann-steered base, all mounted on a reconfigurable aluminium strut frame, and runs containerised ROS software. It was developed through four builds against six requirements for repeated outdoor deployment: durability, modularity, repairability, sensing reach, endurance and reproducibility. Model-based analysis of the last three builds shows the usable share of the arm's reachable poses rising from 34.0% to 60.0% and then 66.1%, and ray casting shows that only the final build keeps the frame-mounted LiDAR's horizontal view clear both forwards and backwards. ALFRED completed a year of monthly forest surveys (528 traversals) without missing a scheduled collection. This was despite battery degradation, reconfiguration for another researcher's study, and the parallel development of ALFRED 2.0 for autonomous crop-row operation, with each switch between builds taking about six hours. The deployment also showed that mechanical modularity is only as dependable as the robot description that tracks it.

0.36

Enhancing Robotic Perception and Adaptability through Sensor Fusion and Origami-Inspired Designs

cs.RO ·2026-10-07 ·Namai Chandra, Jaison Jose, Kavi Arya, Shivaram Kalyanakrishnan
similarity 0.57
Abstract · 11 pages, 11 figures, 3 tables

Compact mobile robots must recover scene geometry under changing lighting and surface texture while working within tight payload and cost limits. We present a compact mobile robot that uses origami-inspired wheels for locomotion and active control of its sensing geometry. As the wheels move between terrain-adaptive configurations, the changing chassis pitch sweeps a 2D LiDAR through intermediate elevations; held wheel positions provide a chosen viewing angle. An IMU accounts for chassis attitude, and a fusion node projects LiDAR returns into the RGB-D depth stream supplied to RTAB-Map. The arrangement uses the wheel actuation already present on a sub-300 USD, sub-2 kg prototype to extend the scanner's viewing geometry. We assess depth fusion in a textureless indoor corridor and an outdoor sunlit area, with three runs per sensor configuration in each setting. Mean full-frame invalid-depth fractions fell from 21% to 11% indoors and from 48% to 18% outdoors. The prototype combines improved depth coverage with a continuously adjustable LiDAR viewpoint using the same actuation that reconfigures its wheels.

0.25

An Integrated Open-Source Stack for Vision-Based Autonomous Navigation of Wheeled Rovers

cs.RO ·2026-11-05 ·Iaroslav Kolomiets, Iaroslav Sheipak, Mikhail Reppo, Vsevolod Egorov, Viktor Chertopolokhov +1 more
publishedcode/data similarity 0.56
Abstract · Accepted at RiTA 2026

Vision-based rover autonomy requires integrating perception, localization, planning and platform-specific control under limited sensing and computing resources. We present an open-source ROS 2 stack for following directional arrows, reaching a terminal cone and returning autonomously to the start. It connects YOLOv8n detection and geometric direction, range and bearing estimation with RGB-D SLAM, wheel-inertial state estimation, kinematics-aware planning, behavior-tree mission management and STM32 actuation. Standard interfaces separate reusable autonomy from the hardware layer; a proportional path-following plugin supports low-speed rover motion. Public resources include software, configuration, a labeled dataset, trained weights and evaluation logs. On 478 held-out images, the detector achieves mAP@0.5 of 0.720 under the Ultralytics evaluator and outperforms a classical OpenCV baseline under a shared evaluation protocol. The reported perception latency is 25 ms on a Jetson Orin NX. Three missions, one indoor and two outdoor, demonstrate marker-guided navigation and autonomous return without operator motion commands or reported collisions. Field results document integration failures and corrective choices; repeated instrumented trials remain necessary to quantify physical navigation errors and reliability.

0.28

LynxScenes: A Large-Scale Real-World Benchmark for Outdoor Wheel-Legged Robot Perception, Navigation, Imagination and Reconstruction

cs.RO ·2026-10-13 ·Jun Tian, Hao Wu, Ruo Chen, Yili Liao, Hongyi Lin +3 more
benchmarkdataset similarity 0.56
Abstract · 20 pages, 9 figures. Includes appendices

Wheel-legged robots operating in outdoor spaces shared with humans require accurate perception, socially compliant navigation, future-scene reasoning, and scene reconstruction. However, existing datasets typically support these capabilities in isolation and rarely provide dense spatial and behavior-level supervision on real wheel-legged platforms. We introduce LynxScenes, a large-scale real-world dataset and benchmark collected with a LYNX M20 wheel-legged robot. It contains approximately 100K 30-s navigation clips spanning 833.6 h and 3,294.7 km, with 3.0M annotated frames. The synchronized recordings include four fisheye cameras, dual LiDARs, IMU, odometry, and robot states. Annotations comprise 20.82M oriented 3D boxes across 27 categories, 13.89M road-structure annotations, and 20 navigation instructions organized into three layers and aligned with continuous future trajectories. LynxScenes supports four complementary tasks: instruction-conditioned trajectory prediction, BEV-based perception of 3D objects and road structures, future scene prediction, and multi-view scene reconstruction. For trajectory prediction, we further introduce a log-replay-based pseudo-closed-loop evaluator that measures safety, progress, and instruction compliance beyond trajectory imitation. Extensive evaluations across representative navigation, perception, world-model, and reconstruction methods reveal substantial remaining challenges in close-range outdoor robot navigation. The dataset and evaluation toolkit are planned for public release.

0.20

Designing an Efficient Excavator Bucket for Lunar ISRU: A Comparative Study with Vision-Based Fill and Displacement Analysis

cs.RO ·2026-09-22 ·Abdulla Hil Kafi, Tomoki Koshi, Jorge Casir, Kenji Nagaoka
top venue similarity 0.55
Abstract · Accepted and presentaed at the 2026 IEEE International Conference on Robotics and Automation (ICRA 2026)

This paper present a spiral-cavity wheel for lunar regolith excavation and a sensor-light evaluation stack that jointly estimates fill ratio (vision), sinkage (vision), and specific energy from actuator logs. In benchtop tests (four revolutions at 5, 10, and 15~RPM) against two literature baselines, the proposed wheel achieved higher excavated mass and fill ratio, delivering 2.2-3.0 times higher excavation rate while reducing specific energy by 29 % relative to a bucket-drum baseline. Normalized sinkage (mm/kg) was also lower, indicating stable traction without bogging. Effort-time traces show a steady torque envelope with repeatable cut-carry-dump cycles across speeds. We provide a retention index $η$ that correlates with fill ratio and a DEM setup that reproduces experimental trends with low error. Results suggest spiral-cavity wheels can replace heavier multi-actuator diggers when mass, simplicity, and energy efficiency are mission drivers.

0.45

Simulation for Planetary Robotic Perception and Autonomy: A Concise Survey of Recent Capabilities and Gaps

cs.RO ·2026-09-28 ·Hoyun Kim, Giseop Kim
publishedsurvey similarity 0.55
Abstract · 8 pages, 5 figures, 3 tables. Accepted for publication at the 2026 International Conference on Space Robotics (iSpaRo)

Planetary robotics is an important enabler of scientific exploration in environments where direct human-in-the-loop operation is costly, hazardous, or infeasible. However, developing and validating planetary robotic systems remains difficult because representative field testing is expensive, limited, and often unrepeatable under mission-relevant conditions. In this setting, simulation serves as a central tool for perception and autonomy research, synthetic data generation, system integration, and pre-deployment evaluation. Despite its importance, the literature on planetary robotics simulation remains dispersed across different simulation engines, implementations, and application settings. This paper surveys simulation works for planetary robotic perception and autonomy across four practical axes: Openness and Availability, Scenario and Platform Coverage, Sensor and Perception Support, and Environmental and Operational Realism. The surveyed simulation works report visual or physical fidelity and support perception-oriented workflows. They also indicate uneven public availability, rover-centered coverage, partial support for specialized sensing modalities, and uneven reporting of operational constraints such as onboard computation, energy, and communication restrictions.

0.38