CS Paper Radar

Integrated Design and Reproducible Feasibility Analysis of a Four-Wheel Rover with Packet-Commanded Imaging, LiDAR Ranging, and Learning-Assisted Target Recognition

Sabik Bin Sultan, Shafi Bin Sultan, Safwan Sadad, Aranya Abeer Khan Prapya, Maria Sultan

cs.RO ·submitted 2026-10-27 08:19 UTC · v1
benchmark

Abstract

This study develops an integrated, reproducible design assessment for a four-wheel educational rover intended for the high-school remote-control division of the 2027 NASA Human Exploration Rover Challenge. The architecture combines commercial differential drive control, independently sprung wheel carriers, separate drive and task batteries, and a Raspberry Pi-based subsystem that executes received imaging and ranging commands. The analysis reconciles component lists with dimensioned computer-aided design views, derives mobility and electrical constraints, and connects sensor geometry to command execution. At the estimated mass of 10.919 kg, a 215 mm wheel rotating at 200 RPM produces a theoretical rolling speed of 8.105 km/h; consequently, the nominal motor label does not establish compliance with an 8 km/h design ceiling. A steady 20-degree climb requires at least 1.255 newton-meters per wheel under an assumed rolling-resistance coefficient of 0.10 and equal torque sharing. At 50 ft, an ideal 12-inch feature spans approximately 71 pixels across a full-resolution Camera Module 3 Standard image, while a 1-degree pointing error displaces the ranging ray by approximately 266 mm. An executed synthetic benchmark compares color-geometry rules and two linear support-vector classifiers on 2,400 generated board crops with scene-disjoint evaluation. A separate reference command executor is checked using mocked hardware. These software results and analytical sensitivities support a testable development plan; the study does not report physical rover trials. The principal contribution is a traceable connection between component choices, failure mechanisms, quantitative design limits, and reproducible verification tasks.

Comment
Research Manuscript for NASA HERC 2027

Closest papers

Nearest neighbours by meaning across the whole index.

A3P5 NEMESIS Integrated Rover Design for Environmental Reconnaissance and Robotic Sampling with Reproducible Mobility Analysis and an External Data Machine Learning Calibration Benchmark

cs.RO ·2026-09-16 ·Shafi Bin Sultan, Sabik Bin Sultan, Safwan Sadad
benchmark similarity 0.72
Abstract

A3P5 NEMESIS is a four-wheel rover intended to combine remote inspection, environmental observation and lightweight manipulation within one serviceable platform. This study develops a photo-constrained geometric reconstruction, a subsystem architecture and a reproducible analytical assessment while distinguishing physical prototype evidence from proposed functions. An exploratory search retrieved 5,000 bibliographic records across ten queries, yielding 4,897 distinct DOI records and 1,212 metadata candidates; selected primary studies and technical documents informed the design. The reconstructed configuration retains the carbon-pattern enclosure, independently steered wheel assemblies, folded manipulator, inclined camera mast and side sampling equipment. A declared 24 kg scenario predicts 3.28 newton-metres of gearbox-output torque per wheel on a 20-degree grade under equal load sharing; a separate static model shows how a 2 kg forward payload reduces the geometric front-tipping bound from 38.1 degrees to 32.7 degrees. These are design screens, not measured operating limits. A public-data calibration benchmark uses 7,344 eligible hourly observations, eight sensor/environmental predictors and chronological training, validation and test partitions. Validation-selected ridge regression achieves a held-out CO root-mean-square error of 0.502 milligrams per cubic metre, with a 95% daily-block bootstrap interval of 0.435-0.569 milligrams per cubic metre. This result concerns an external sensor array and cannot establish NEMESIS accuracy. The combined analysis identifies priority measurements, proposed control interfaces and mission-specific validation requirements. The contribution is a traceable engineering design study and evaluation framework for a prototype whose integrated field performance remains to be established.

0.27

Zephyron: Integrated Design and Analytical Evaluation of a Solar-Assisted Mobile Manipulator for Multimodal Environmental Reconnaissance and Distributed Visual Inference

cs.RO ·2026-09-22 ·Sabik Bin Sultan, Shafi Bin Sultan, Safwan Sadad
similarity 0.71
Abstract

Environmental reconnaissance needs mobile platforms that carry sensors, preserve measurement context, and return interpretable evidence under limited energy and communication. We present a literature-informed engineering design for Zephyron, a four-wheel rover with a front manipulator, environmental sensors, distributed computer vision, local recording, and a raised rear solar module. The design keeps the prototype layout but replaces unsupported numerical assumptions with an explicit component and geometry baseline. A reproducible search retrieved 5,000 records (4,858 unique) for screening, followed by targeted review of primary literature and manufacturer documentation. The baseline uses 165 mm wheels, a 12 kg mass budget, a 72 Wh battery-energy basis, and a 20 W photovoltaic module. With rolling-resistance coefficient 0.04, steady ascent of a 10 degree grade needs about 0.517 N m per wheel under equal load sharing. An illustrative 40 W motion load gives 1.44 h from 57.6 Wh usable energy, and a 25 percent driving duty gives 4.19 h without solar input; these are calculated scenarios, not measured performance. Sensor models show how integration time, calibration, temperature, and communication delay constrain interpretation, and a quality-aware stop-and-sample policy links these constraints to mission execution. Lightweight detectors, reference-based sensor learning, and executable data-integrity checks define a reproducible machine-learning evaluation pathway. The contribution is a traceable design and evaluation framework with editable 3D models, subsystem diagrams, and reproducible analytical data. Experimental validation is required before assigning payload, endurance, detection, or field-operating ratings.

0.21

An Integrated Open-Source Stack for Vision-Based Autonomous Navigation of Wheeled Rovers

cs.RO ·2026-11-05 ·Iaroslav Kolomiets, Iaroslav Sheipak, Mikhail Reppo, Vsevolod Egorov, Viktor Chertopolokhov +1 more
publishedcode/data similarity 0.66
Abstract · Accepted at RiTA 2026

Vision-based rover autonomy requires integrating perception, localization, planning and platform-specific control under limited sensing and computing resources. We present an open-source ROS 2 stack for following directional arrows, reaching a terminal cone and returning autonomously to the start. It connects YOLOv8n detection and geometric direction, range and bearing estimation with RGB-D SLAM, wheel-inertial state estimation, kinematics-aware planning, behavior-tree mission management and STM32 actuation. Standard interfaces separate reusable autonomy from the hardware layer; a proportional path-following plugin supports low-speed rover motion. Public resources include software, configuration, a labeled dataset, trained weights and evaluation logs. On 478 held-out images, the detector achieves mAP@0.5 of 0.720 under the Ultralytics evaluator and outperforms a classical OpenCV baseline under a shared evaluation protocol. The reported perception latency is 25 ms on a Jetson Orin NX. Three missions, one indoor and two outdoor, demonstrate marker-guided navigation and autonomous return without operator motion commands or reported collisions. Field results document integration failures and corrective choices; repeated instrumented trials remain necessary to quantify physical navigation errors and reliability.

0.28

Enhancing Robotic Perception and Adaptability through Sensor Fusion and Origami-Inspired Designs

cs.RO ·2026-10-07 ·Namai Chandra, Jaison Jose, Kavi Arya, Shivaram Kalyanakrishnan
similarity 0.62
Abstract · 11 pages, 11 figures, 3 tables

Compact mobile robots must recover scene geometry under changing lighting and surface texture while working within tight payload and cost limits. We present a compact mobile robot that uses origami-inspired wheels for locomotion and active control of its sensing geometry. As the wheels move between terrain-adaptive configurations, the changing chassis pitch sweeps a 2D LiDAR through intermediate elevations; held wheel positions provide a chosen viewing angle. An IMU accounts for chassis attitude, and a fusion node projects LiDAR returns into the RGB-D depth stream supplied to RTAB-Map. The arrangement uses the wheel actuation already present on a sub-300 USD, sub-2 kg prototype to extend the scanner's viewing geometry. We assess depth fusion in a textureless indoor corridor and an outdoor sunlit area, with three runs per sensor configuration in each setting. Mean full-frame invalid-depth fractions fell from 21% to 11% indoors and from 48% to 18% outdoors. The prototype combines improved depth coverage with a continuously adjustable LiDAR viewpoint using the same actuation that reconfigures its wheels.

0.25

Path-Following Control and Terramechanics Analysis for Planetary Rovers Under Wheel-to-Wheel Traction Asymmetry

cs.RO ·2026-09-30 ·Ryuya Matsuoka, Keisuke Takehana, Kentaro Uno, Toshinori Kuwahara, Kazuya Yoshida
published similarity 0.62
Abstract · Author's version of a manuscript accepted at the International Conference on Space Robotics 2026 (iSpaRo 2026). (c) IEEE

This paper proposes a control strategy for path following that is model-free and relies solely on deceleration for skid-steering planetary rovers navigating deformable loose terrain under continuously imposed traction asymmetry. While conventional controllers that are based on kinematics frequently cause slip-sinkage entrapment by accelerating the wheels during path correction, the proposed approach prevents this failure by setting an upper limit on the maximum commanded velocity. Heading correction is achieved solely through the selective deceleration of the outer wheels, which are located on the outside of the turn, driving them into a negative slip regime to act as a mechanical anchor. The system was evaluated using the four-wheel independent-drive rover EX1 under an asymmetric wheel configuration with different left and right grouser heights that induces significant deviations from the path. Experimental results demonstrate that this deceleration-only control successfully suppresses accumulated lateral drift across various velocity regimes up to 0.7 m/s without causing sinkage. Crucially, direct force measurements from onboard multi-axis sensors provide important empirical evidence of the underlying terramechanics, proving that the targeted deceleration establishes dynamic load equalization across the chassis and completely restores the native thrust capability of the opposite driving wheel.

0.37

LynxScenes: A Large-Scale Real-World Benchmark for Outdoor Wheel-Legged Robot Perception, Navigation, Imagination and Reconstruction

cs.RO ·2026-10-13 ·Jun Tian, Hao Wu, Ruo Chen, Yili Liao, Hongyi Lin +3 more
benchmarkdataset similarity 0.61
Abstract · 20 pages, 9 figures. Includes appendices

Wheel-legged robots operating in outdoor spaces shared with humans require accurate perception, socially compliant navigation, future-scene reasoning, and scene reconstruction. However, existing datasets typically support these capabilities in isolation and rarely provide dense spatial and behavior-level supervision on real wheel-legged platforms. We introduce LynxScenes, a large-scale real-world dataset and benchmark collected with a LYNX M20 wheel-legged robot. It contains approximately 100K 30-s navigation clips spanning 833.6 h and 3,294.7 km, with 3.0M annotated frames. The synchronized recordings include four fisheye cameras, dual LiDARs, IMU, odometry, and robot states. Annotations comprise 20.82M oriented 3D boxes across 27 categories, 13.89M road-structure annotations, and 20 navigation instructions organized into three layers and aligned with continuous future trajectories. LynxScenes supports four complementary tasks: instruction-conditioned trajectory prediction, BEV-based perception of 3D objects and road structures, future scene prediction, and multi-view scene reconstruction. For trajectory prediction, we further introduce a log-replay-based pseudo-closed-loop evaluator that measures safety, progress, and instruction compliance beyond trajectory imitation. Extensive evaluations across representative navigation, perception, world-model, and reconstruction methods reveal substantial remaining challenges in close-range outdoor robot navigation. The dataset and evaluation toolkit are planned for public release.

0.20

Universal Navigation Interface: Robot-Free Data for Wheeled Robot Navigation

cs.RO ·2026-09-17 ·Sarvesh Prajapati, Ananya Trivedi, Lorena Maria Genua, Drake Moore, Bruce Maxwell +1 more
code/data similarity 0.60
Abstract · 8 pages, 4 figures, 7 tables. Project page: https://universal-nav.github.io/

Collecting real-world navigation data for mobile robots typically requires platform-specific teleoperation, making large-scale collection expensive and difficult to scale. We introduce Universal Navigation Interface (UNI), a robot-free data collection paradigm that uses a four-wheeled rollator walker (rollator) and smartphone to collect physically constrained human demonstrations. Because the rollator cannot climb stairs, negotiate uncut curbs, or pass through narrow gaps, demonstrations are naturally biased toward wheeled-feasible routes. Using UNI, we collect 37.2 km of real-world navigation data and recover metric trajectories that directly supervise goal-conditioned navigation models. Fine-tuning visual-navigation models on UNI reduces trajectory prediction error by 17.4-24.8% on held-out UNI demonstrations. Evaluation on other navigation datasets shows benefits that vary by dataset and metric. We further demonstrate closed-loop transfer to a powered wheelchair in curb, staircase, and curb-cut scenarios. These results support low-cost physical proxies as a practical source of navigation supervision collected without the target robot.

0.40

Agibot: An Open-Source Modular Swerve-Drive Robot Platform for Agricultural Robotics Research and Education

cs.RO cs.LGeess.SY ·2026-11-06 ·Moeen Ul Islam, Bishal Adhikari, Kori Edwards, Lorien Harvey, J. Alex Thomasson +1 more
code/data similarity 0.59
Abstract · 14 pages. Submitted to IEEE Transactions on AgriFood Electronics (TAFE)

Agricultural production faces persistent labor shortages and increasing demand for automation, yet progress in agricultural robotics remains constrained by the limited availability of affordable, flexible, and accessible research platforms. This paper presents Agibot, an open-source, modular, low-cost agricultural robotics platform designed for autonomy research and experimentation, with potential applications in hands-on robotics education. The platform integrates four-wheel independent swerve drive, swappable computing, distributed embedded control, multimodal sensing, and configurable manipulation within a unified sense-plan-act-verify framework supporting perception, control, navigation, manipulation, and autonomous task verification. The platform was evaluated through representative row-crop navigation and manipulation tasks under varying lighting and soil conditions. Experiments demonstrated reliable lane following, autonomous row-to-row navigation, target identification, seed dispensing, plant manipulation, and closed-loop verification of task success. Its modular architecture supports independent testing, modification, and validation of autonomy components for rapid prototyping and experimentation. These proof-of-concept tasks, controller-tuning studies, and integrated trials demonstrate the platform's research capabilities, while its accessible and reconfigurable design supports its use for hands-on robotics education. By combining affordability, modularity, open-source accessibility, configurable manipulation, and end-to-end sense-plan-act-verify autonomy, Agibot provides a practical platform for agricultural robotics research, technology development, and workforce training.

0.34