CS Paper Radar

CFD Correction of Open Tip Clearance Flow in a Compressor Cascade Using VAE Latent Space Adaptation

Xiang Zuo, Hefang Deng, Caiyan Chen, Honglin He, Mingmin Zhu, Songan Zhang, Jinfang Teng

cs.LG ·submitted 2026-09-23 09:01 UTC · v1
unusual

Abstract

CFD predictions of open tip clearance flow in compressor cascades are subject to discrepancies relative to experiments, while experimental observations are sparse and high-resolution experimental ground truth is unavailable. This study proposes a non-intrusive correction method based on a variational autoencoder (VAE) and latent-space adaptation. A VAE is first trained using a dataset of 166 parametrically sampled CFD total pressure loss fields to learn a low-dimensional statistical representation of these fields. The VAE is then frozen, and a low-rank latent-space adapter is trained using only 12 paired CFD--experiment operating conditions. An observation operator maps the corrected high-resolution fields to the experimental observation space, allowing supervision to be applied only at the available measurement locations and within the measured pitchwise windows. In the current 12-fold cross-validation, the mean absolute error decreases from 0.1335 to 0.0473, the root mean square error from 0.1717 to 0.0621, and the relative $L_2$ error from 0.5108 to 0.1871. These results indicate that the method improves agreement between CFD predictions and sparse experimental observations of open tip clearance flow without modifying the RANS solver or constructing artificial high-resolution experimental labels.

Closest papers

Nearest neighbours by meaning across the whole index.

Local Consistency Does Not Guarantee Global Conservation: Auditing Zero-Shot Composition of Airway Flow Operators

eess.SY ·2026-10-01 ·Nichula Sathmith Wasalathilaka, Navodya Heshan Samarasinghe Dhanujaya Suraweera, Kevin Dawson, Chinthaka Jacob Mervyn Parakrama Bandara Ekanayake, Roshan Godaliyadda
similarity 0.57
Abstract

Neural operators approximate PDE solutions within a geometry family, but independently learned local operators need not form a consistent global simulator. We study frozen, single-pass composition for steady incompressible flow in idealized two-dimensional airway trees. Separate Tube, bifurcation, and trifurcation DeepONets are trained on 4,872 primitive CFD cases using field supervision and auxiliary divergence, port-flux, component-balance, and port-pressure penalties. The validation-selected deployment is frozen before whole-tree CFD fields are inspected and assembled without tree training, iterative coupling, flux correction, or CFD-informed adjustment. It retains major flow patterns and controlled pathology responses with 0.204-0.215 s CPU inference, but has a 22.68% prescribed-inlet-normalized external residual. A post-hoc sensitivity protocol, frozen before new training and evaluation, repeats Data, Div, and Full models across three seeds with Tube fixed. Relative to Data, Full reduces primitive composite scores by 26.7% for Y2 and 26.4% for Y3 and reduces assembled component-residual and interface-mismatch RMS by 7.2% and 16.6%, respectively. Nevertheless, mean tree velocity error increases by 7.5%, while external residual increases from 17.49 +/- 4.38% to 26.77 +/- 3.65%. Local regularization can therefore improve primitive and assembled local diagnostics without ensuring accurate global fields or conservation.

0.21

Residual-Guided Multi-Step Conditional Generation for Fast Airfoil Flow Field Prediction

cs.CE ·2026-11-17 ·Weishao Tang, Mingcheng Lei, Yufei Zhang
similarity 0.55
Abstract

Deep-learning surrogate models for aerodynamic flow prediction are efficient within the training distribution, but their accuracy often degrades sharply in out-of-distribution (OOD) scenarios. To improve OOD robustness for airfoil flow-field inference, this study proposes a residual-guided sequential inference framework to correct the unreliable local flow field. The framework consists of three Transformer-based components: a Flow Initializer for direct flow prediction, a Residual-based Corrector for high-residual regions, and a Shock-based Corrector for shock regions. The framework is evaluated on an engineering-oriented OOD test set built from CFD-based aerodynamic optimization trajectory. The proposed framework reduces the L1 error, CL error, and CD error by 30%, 59%, and 41%, respectively, relative to the usual single step Geo-to-Flow prediction. The additional iterative inference cost is only 0.25s per sample. These results demonstrate that the proposed framework provides an effective route for improving OOD robustness in airfoil surrogate modeling.

0.14

A Data Fusion Framework for Grounding Aerospace Surrogate Model via Experimental Wind-Tunnel Observations

cs.LG ·2026-09-02 ·Nitin Nagesh Kulkarni, Dheeraj Vemula, Yin Yu, Peter Lyu, Juan J. Alonso
hot direction similarity 0.53
Abstract

Aerodynamic surrogate models trained on high-fidelity CFD data reproduce numerical predictions of both scalar outputs and entire fields accurately, yet their predictive fidelity is limited by systematic discrepancies between CFD and experimental observations. We present an experimentally grounded correction framework that adapts a CFD-trained deep learning surrogate using wind-tunnel PSP measurements. A Geotransolver surrogate trained on 2,300 high-fidelity CFD simulations of the NASA CRM wing-body configuration, spanning geometric variation, Mach 0.70-0.85, and angles of attack 0 to 4 degrees, reproduces the CFD integrated aerodynamic forces and pitching moment to R2 > 0.99 but does not match the experimental data. To incorporate experimental information without retraining the surrogate, a correction network is trained on spatially registered PSP measurements at two freestream Mach numbers (0.70 and 0.85) across the same angle-of-attack range, learning the discrepancy between the surrogate-predicted and experimentally measured surface-pressure distributions. At Mach 0.85 the correction substantially improves agreement with PSP, particularly at the wing suction peak, shock location, and subsequent pressure recovery, reducing both the magnitude of the prediction error and the fraction of wetted surface on which it exceeds 0.05 in Cp, and it does so from a limited experimental dataset without modifying the pretrained surrogate parameters. On held-out angles of attack the grounded surrogate agrees with measurement to within 2.3-2.7% of the measured Cp range, and outperforms direct interpolation between the measured conditions at every state tested. Experimental measurements can therefore ground a large-scale simulation-trained surrogate by learning systematic CFD-to-experiment discrepancies while preserving its generalization capability and computational efficiency.

0.29

Readable Is Not Steerable: Pre-Registered Tests of Physical Structure in Learned Fluid Representations

cs.LG cs.AIphysics.flu-dyn ·2026-11-03 ·Manvendra Modgil
code/data similarity 0.53
Abstract · 30 pages, 9 figures. Code, pre-registrations and checkpoints: https://github.com/2025eb1100268-tech/readable-not-steerable

Self-supervised world models are often said to organize their latents around physical quantities. We test this on 2D decaying Navier-Stokes flow in three pre-registered studies, each tested once on held-out data. In Study 1, a joint-embedding predictive architecture (JEPA) trained to predict the flow fails the pre-registered criteria for organizing its latent around fluid quantities better than an untrained network of the same architecture (not supported); a JEPA trained on non-physical linear dynamics and a static invariance model that never sees time do as well or better. In Study 2, plain autoencoders that render the field make enstrophy prominent in their slowest unsupervised latent directions (best r 0.80-0.86 vs 0.38 untrained; fresh seeds, sealed data). Adding VICReg lowers this prominence in every comparison, though not by the pre-registered margin for vorticity, while raising the autoencoders' linear decodability (partially supported). In Study 3, we build steerable directions ("dials") by routing: the decoder gets overall scale only through a small conditioning code, while its other pathway carries a degraded copy of spectral shape. Label-free rules find a loudness dial in all 8 trained models and a shape dial in 3 of 5 fresh seeds on sealed data, against a pre-registered bar of 4; neither control shows a shape dial (partially supported). Across the studies, what a latent contains and what can be controlled through it come apart. In exploration, a supervised direction reading spectral shape almost perfectly moved nothing when steered. During the build, the loudness dial had to be found by its effect on the output (closest to a pure rescaling), not by data variance; for shape, a variance rule and an effect-constrained rule each worked in 3 of 5 seeds. The program used about 70 logged hours on one consumer GPU; all pre-registrations, deviations, code and outputs are public.

0.30

VATO: A Vortex-Force-Aware Transformer Operator for Unsteady Separated Aerofoil Flows

cs.LG ·2026-09-01 ·Xingxin Yang, Zhan Zhang, Yichen Li, Juan Li
similarity 0.52
Abstract

Accurate prediction of unsteady separated flows is challenging because the aerodynamic loads depend on nonlinear separation and vortex-shedding dynamics. Although high-fidelity CFD resolves these mechanisms, its cost limits repeated use in design and control. Standard field-level surrogate training, however, does not distinguish the flow regions that contribute most strongly to the aerodynamic loads. We introduce VATO (Vortex-Force-Aware Transformer Operator), which couples the Vortex Force Map (VFM) method to a geometry-aware neural operator through two complementary mechanisms. VATO-S adds training-only supervision of the local VFM force-contribution field, with no increase in model size or inference cost. VATO-A uses VFM contribution and sensitivity fields to prioritise force-relevant source locations for residual cross attention. The methods are evaluated on unsteady CFD data for double-edged-plate aerofoils over 54 trajectories from nine geometries. Over lead times of 1-20~ms, VATO-S reduces velocity, pressure, and vorticity errors by 10.4\%, 1.0\%, and 15.6\%, respectively, while VATO-A achieves reductions of 15.8\%, 7.5\%, and 31.2\%. VATO-S gives the lowest VFM-derived drag error, whereas VATO-A gives the lowest pressure-derived lift and drag errors. Over lead times extending 50\% beyond the training range, VATO-A retains a 26.9\% reduction in vorticity error and larger improvements in all four force readouts, despite reduced gains in velocity and pressure. These results show that force-aware operator learning can improve both flow-field prediction and aerodynamic functional accuracy in unsteady separated flows.

0.28

Self-Supervised Tuning of Low-Fidelity Optimization Models via High-Fidelity Feedback

cs.LG math.OC ·2026-10-20 ·Gonzalo E. Constante-Flores, André H. Quisaguano-Paredes, Asha Ramanujam, Rishabh Gupta, Can Li
similarity 0.52
Abstract · 50 pages, 6 figures, 13 tables

Low-fidelity (LF) optimization models are widely used in large-scale operations because they can be solved efficiently and reliably, but they often exhibit systematic errors relative to high-fidelity (HF) formulations that better capture physical and operational constraints. Existing learning-based approaches typically rely on supervised or semi-supervised training with HF solutions, which are expensive to compute and may not align with HF operational objectives. We propose a self-supervised framework that parameterizes LF optimization models directly from HF feedback. The low-fidelity problem is embedded as a differentiable optimization layer and trained end-to-end, while a HF correction problem evaluates its solution and provides gradient information through its dual variables, without requiring HF solution labels. We evaluate the framework on optimal power flow, optimal gas flow, and pooling problems, spanning different sources of low- and high-fidelity mismatch. Across all three applications, the self-supervised approach improves objective quality and feasibility over untuned LF models and generally outperforms semi-supervised training. The learned parameterizations also generalize to unseen operating conditions and, for network applications with up to 30,000 nodes, to systems not encountered during training.

0.21

Variational Parameter Calibration with Physics-Aware Latent-Space Surrogates

cs.LG physics.comp-phphysics.data-anphysics.flu-dyn ·2026-08-11 ·Qiyao Zhou, Xujia Zhu, Pierre Joli, Yu Cong, Sibo Cheng
similarity 0.51
Abstract

Forward and inverse modeling of parametric dynamical systems requires surrogate models that are not only accurate for state prediction, but also informative for parameter calibration. However, a systematic end-to-end differentiable formulation for coupling deep-learning-based reduced-order surrogates with variational parameter estimation remains underdeveloped. In this work, we introduce a physics-aware neural-network-based latent-space framework for reduced-order forward modeling and variational parameter estimation. The proposed autoencoder-based approach yields a differentiable surrogate that maps physical parameters to predicted flow fields through a latent representation. The observable supervision is used during offline training to encourage the latent variables to retain information correlated with system parameters, while the online inverse problem is solved in the parameter space through the surrogate-induced observation operator. The method is evaluated on two computational-fluid-dynamics benchmarks. The results show that reconstruction accuracy alone is insufficient for inverse modeling, owing to the lack of end-to-end differentiability or physics awareness for variational parameter calibration. Quantitative latent-space analysis further shows that observable supervision improves case-level separability and temporal organization of latent representations. Experiments with realistic measurement settings, including noisy, low-resolution, randomly masked, and block-wise partial observations, demonstrate the robustness of the proposed framework and show that it generally reduces calibration error and variability compared with the standard surrogate models.

0.04

Multivariate Scientific Data Compression with Learned Cross-Variable Latent Decorrelation and Autoregressive Entropy Modeling

cs.LG ·2026-08-31 ·Liangji Zhu, Anand Rangarajan, Sanjay Ranka
similarity 0.51
Abstract · 11 pages, 4 figures, 4 tables

Scientific simulations generate collections of physical fields with heterogeneous statistics and dependencies, yet learned compressors often encode those fields independently or rely on a shared encoder without explicitly modeling the structure that remains in latent space. We present CAESAR-LDAR, an error-controlled multivariate learned compressor that augments a shared CAESAR-V backbone with two complementary mechanisms: a trainable orthogonal transform that reorganizes dependence across aligned latent channels, and a causal autoregressive hierarchical prior that captures local spatial structure left after transformation. Orthogonality is maintained through a matrix-exponential parameterization, making the transform exactly invertible without an additional penalty. A common residual-correction stage is applied uniformly to all variants to enforce the requested reconstruction tolerance. Experiments across combustion, climate, and turbulence data show that the two mechanisms are useful in different regimes. Latent decorrelation helps most when substantial linear cross-channel dependence survives the nonlinear encoder, whereas autoregressive modeling remains effective when the remaining structure is primarily local or spatial. Their combination provides the strongest or near-strongest rate-distortion performance across the evaluated datasets. The global transform adds little computational overhead, while autoregressive coding introduces a larger throughput tradeoff. More broadly, the results suggest a practical design principle for multivariate scientific compression: exploit global cross-channel dependence when it is measurably present in latent space, and use local probabilistic context as a complementary mechanism across a wider range of data regimes.

0.25