CS Paper Radar

Local Consistency Does Not Guarantee Global Conservation: Auditing Zero-Shot Composition of Airway Flow Operators

Nichula Sathmith Wasalathilaka, Navodya Heshan Samarasinghe Dhanujaya Suraweera, Kevin Dawson, Chinthaka Jacob Mervyn Parakrama Bandara Ekanayake, Roshan Godaliyadda

eess.SY ·submitted 2026-10-01 17:02 UTC · v1

Abstract

Neural operators approximate PDE solutions within a geometry family, but independently learned local operators need not form a consistent global simulator. We study frozen, single-pass composition for steady incompressible flow in idealized two-dimensional airway trees. Separate Tube, bifurcation, and trifurcation DeepONets are trained on 4,872 primitive CFD cases using field supervision and auxiliary divergence, port-flux, component-balance, and port-pressure penalties. The validation-selected deployment is frozen before whole-tree CFD fields are inspected and assembled without tree training, iterative coupling, flux correction, or CFD-informed adjustment. It retains major flow patterns and controlled pathology responses with 0.204-0.215 s CPU inference, but has a 22.68% prescribed-inlet-normalized external residual. A post-hoc sensitivity protocol, frozen before new training and evaluation, repeats Data, Div, and Full models across three seeds with Tube fixed. Relative to Data, Full reduces primitive composite scores by 26.7% for Y2 and 26.4% for Y3 and reduces assembled component-residual and interface-mismatch RMS by 7.2% and 16.6%, respectively. Nevertheless, mean tree velocity error increases by 7.5%, while external residual increases from 17.49 +/- 4.38% to 26.77 +/- 3.65%. Local regularization can therefore improve primitive and assembled local diagnostics without ensuring accurate global fields or conservation.

Closest papers

Nearest neighbours by meaning across the whole index.

Learnable composition for neural operators

cs.LG ·2026-09-02 ·Zituo Chen, Baiming Zhang, Sili Deng
similarity 0.63
Abstract

Neural operators are fast, differentiable surrogates for physical simulation, but their accuracy often degrades when domain geometry, size, or operating conditions differ from training. Supervised adaptation can recover accuracy, but even a small target set requires costly high-fidelity simulations. We therefore ask how pretraining and transfer can be designed together to reduce this deployment cost. LatentDDM first pretrains a neural operator to predict fields on small subdomains. For a new setting, it freezes this operator and trains only a lightweight module that composes the local predictions. We evaluate our method on two complementary problems: steady Darcy flow, where long-range pressure coupling must extend across increasingly large porous domains, and unsteady incompressible flow around a pitching airfoil, where rollout errors compound as target pitching frequencies exceed the training range. Compared with the capacity-matched models that process the full domain at once, LatentDDM's error is 36-56% lower on larger Darcy domains after adaptation with 16 target simulations. It also improves 20-step field rollouts in fast-pitching airfoil flow, both zero-shot and after few-shot calibration. These results identify the co-designed local pretraining and composition-level transfer as a promising design principle for physical foundation models.

0.28

Complementary, Not Cumulative: Interaction Effects in Physics-Informed Neural Networks for Navier-Stokes Vortex Shedding

cs.LG physics.flu-dyn ·2026-08-20 ·Devesh Shah
benchmark similarity 0.62
Abstract

Physics-informed neural networks (PINNs) embed governing partial differential equations directly into the training loss, offering a promising alternative to costly CFD solvers for unsteady flows. Yet the growing list of techniques proposed to improve PINN training is typically validated one at a time, leaving open whether these techniques actually compose. We study this question in depth on the DFG/Schafer-Turek unsteady cylinder wake benchmark. In isolation, nearly every technique performs no better than an untreated baseline. However, combining periodic (SIREN) activations with causal weighting unlocks a previously inaccessible regime, reconstructing velocity and pressure fields to within 4.1% average relative L2 error against an OpenFOAM reference solution. Adding further techniques instead causes catastrophic performance degradation, demonstrating that individually effective PINN interventions can interact nonlinearly and that more elaborate training recipes are not necessarily better.

0.15

Learning Unsteady Aneurysm Hemodynamics with Physics-Informed DeepONets

cs.LG stat.MLphysics.flu-dyn ·2026-08-13 ·Oscar L. Cruz-Gonzalez, Valérie Deplano, Badih Ghattas
similarity 0.62
Abstract

Clinically actionable, patient-specific hemodynamic assessment, specifically wall shear stress, vortex structure and pressure distributions, is critical for determining risky or unfavorable evolution in Abdominal Aortic Aneurysms (AAA). While Physics-Informed Deep Operator Networks (PI-DeepONets) show promising results in complementing established 5 tools such as Computational Fluid Dynamics (CFD), a persistent architectural challenge remains for complex 3D flows. In this direction, we propose a Modified Multi-Input Multi-Output PI-DeepONets (M3PI-DeepONet) designed for predicting unsteady flows in an idealized AAA geometry. Central to our model is the Aggregated Injection strategy, where latent representations from multiple input branches are fused prior to trunk injection, allowing the coordinate basis to adapt to multiple physical constraints. To the best of our knowledge, this is the first architecture to combine the layer-wise gating mechanism with a multi-branch operator-network topology, yielding an input-adaptive trunk basis. Additionally, we integrate the 3D Navier-Stokes equations as governing physical laws, so the model is trained based on physics-informed residuals, initial and boundary conditions, and only 0.3% of the labeled internal data together with the selected branch-conditioning signals. The M3PI-DeepONet simultaneously predicts unsteady 3D flow velocity and pressure fields with an average relative L2 velocity error below 4% and pressure error around 5% while achieving a conservative retained-cycle inference speedup of approximately 36x compared to reference CFD simulations once the branch inputs used for conditioning are available. This work advances the application of deep learning in cardiovascular disease modeling, marking step toward real-time, non-invasive clinical diagnostics.

0.04

Learned Warm Starts for Steady Transonic RANS Simulations of Wing and Aircraft Configurations

cs.CE physics.flu-dyn ·2026-10-31 ·Muhammad Irfan Zafar, Saleh Abuhanieh, Şahin Yiğit
similarity 0.61
Abstract

Neural surrogates can accelerate many-query aerodynamic analyses, but their standalone predictions may be insufficiently accurate or robust to support reliable design evaluations. We develop a learned warm-start formulation that predicts mean-flow and turbulence fields directly on native CFD meshes for subsequent correction by the RANS solver. A common architecture and objective structure are used across subcritical and transonic flows, including challenging conditions with shock-induced separation. A condition-modulated Transolver combines Fourier and wall features with target-gated regularization, a Sobolev-type loss, adaptive loss weighting and sampled training. Prediction requires no preliminary flow solution, and training requires no solver-residual evaluation. Extensive 3D CFD evaluations on SuperWing, the NASA Common Research Model (CRM) and DLR-F6 assess geometric and operating-condition generalization, including interpolation, extrapolation and cross-mesh deployment, using Spalart-Allmaras and $k$-$ω$ SST closures on million-cell meshes. Unseen nominal cases achieve geometric-mean iteration speed-ups of approximately $2$-$4\times$ under a common convergence criterion based on cold-run aerodynamic coefficients. On CRM, learned initialization provides greater aggregate acceleration than nearest-condition restarts using the same solution library. Resolution invariance enables direct deployment of coarse-mesh models on finer meshes without retraining, solution interpolation or target-condition coarse solves. Including data generation and training, estimated campaign speed-ups reach $2.1$-$2.3\times$. No warm run diverges; fewer than $2\%$ fail to satisfy the cold-reference convergence criterion. These results support learned initialization for repeated aerodynamic analyses, while highlighting initialization sensitivity near separation as a remaining limitation.

0.06

TurtLES: A Large-Scale Benchmark for Turbulent 3D Neural PDE Surrogates

cs.LG physics.flu-dyn ·2026-11-06 ·Jarno Platenburg, Armand Kassaï Koupaï, Paola Cinnella, Patrick Gallinari
benchmarkdataset similarity 0.61
Abstract

Machine-learning surrogates are increasingly used to accelerate computational fluid dynamics, yet progress is limited by the lack of benchmarks capturing realistic, time-dependent turbulent flows. We introduce TurtLES, a 14 TB dataset of 3D turbulent cylinder wakes in the shear-layer transition regime, computed via high-fidelity implicit large-eddy simulations. The dataset contains 400 trajectories of 400 time steps each, with 3-11 million points per frame, spanning variations in geometry, Reynolds number, and angle of attack. Unlike existing datasets, TurtLES combines (i) physically realistic turbulence with an active energy cascade driven by vortex stretching, (ii) dense irregular meshes, and (iii) long-horizon temporal dynamics. We benchmark state-of-the-art neural operators on autoregressive rollouts and identify key failure modes, including temporal instability, loss of small-scale energy, and challenges in learning on large irregular domains. TurtLES provides a new benchmark for evaluating surrogate models on 3D turbulent wakes at industrially relevant mesh resolution.

0.31

FAST-DeepONet: Factor-Augmented Branch Representations for High-Dimensional PDE Inputs in the Small-Sample Regime

cs.LG ·2026-08-15 ·Jiyong Kwon, Bongseok Kim, Guang Lin
similarity 0.60
Abstract

Deep operator networks can become statistically unstable when partial differential equation inputs are observed at thousands of strongly correlated sensors but only a small number of operator samples is available. We introduce FAST-DeepONet, a branch representation combining a fixed spectral path with a regularized projection of the orthogonal residual, in which the directional penalty acts on the effective residual map after each of its rows is normalized. On Navier--Stokes flow a plain DeepONet degrades from $0.0394$ to $0.1556$ mean relative $L_2$ error as the branch grows from $129$ to $8193$ coordinates, while FAST-DeepONet stays near $0.04$, so the sensor grid can be refined without a statistical penalty. Across independent test sets for Navier--Stokes flow, Darcy flow, and signed terminal wavefield prediction it lowers mean relative $L_2$ error by $4.7\%$ to $37.0\%$ with three to seven times fewer trainable parameters. A spectral-only branch sharing the same basis separates the two paths: the fixed spectral path carries the improvement on Navier--Stokes and Darcy, while terminal wave prediction requires the residual path together with its directional penalty. FAST-DeepONet targets coordinate-query architectures and trains on solution values alone.

0.04

AeroZoo: A Benchmark of Well-Posed Flow Problems for Foundation Models of Aerodynamics

cs.LG cs.CEphysics.flu-dyn ·2026-11-12 ·Peter Sharpe, Carmelo Gonzales, Corey Adams, Mehdi Ataei, Sanjay Choudhry
benchmarkcode/data similarity 0.60
Abstract · 35 pages, 13 figures, 23 tables. Lead authors: Peter Sharpe and Carmelo Gonzales. Companion paper to "ISLA: A Coordinate-Free, Measure-Weigh…

Neural surrogates for computational fluid dynamics (CFD) are trained and ranked on datasets that each vary one design family in one flow domain. Such datasets cannot test the least that an aerodynamic foundation model must do: predict CFD-quality incompressible flow in seconds for new shapes in new enclosures. On DrivAerML, larger models and longer training barely lower Transolver's error; doubling the training cases cuts it by about 12% up to 400 cases, exhausting the dataset. We introduce AeroZoo, a benchmark and training corpus of 3,815 time-mean solutions to the unsteady Reynolds-averaged Navier--Stokes (RANS) equations with a transition model, across seven geometry families, eight enclosure configurations and Reynolds numbers from $10^3$ to $10^8$. Each sample poses a well-posed PDE problem in the form a solver receives it: the boundary meshes grouped by condition type, the prescribed values and the fluid properties. The 2,816 samples with a stable time mean form the canonical benchmark: two tasks, engineering metrics and 22 frozen splits, disjoint in geometry, that hold out geometry families, enclosures, boundary-condition layouts and Reynolds ranges. On the random split, boundary-condition tokens cut GeoTransolver's median velocity error from 76.9% to 8.4% of the inlet speed in single-seed runs (uniform inlet flow: 11.0%). ISLA, a transformer for boundary-driven PDEs, reaches 5.3% over four seeds, about 4 times the change from a finer mesh. On the same test samples, a held-out geometry family barely changes ISLA's error relative to uniform flow, and a held-out enclosure or boundary-condition layout raises it 2.4 to 9.2 times. The data and the scoring code will be released.

0.29

SimpFlow: Transferable Pretraining for Fluid Dynamics via Simplified Physics

cs.CE ·2026-11-09 ·Ruijie Li, Tianbai Xiao
benchmark similarity 0.59
Abstract · 29 pages, 20 figures, 19 tables

Neural surrogates enable rapid fluid simulation, but learning across diverse three-dimensional (3D) geometries requires costly computational fluid dynamics (CFD) labels. We introduce SimpFlow, a pretraining approach that generates supervision from simplified physics on unlabeled geometry libraries. A source-panel potential-flow solver generates velocity and pressure fields for approximately 9,000 3D geometries, capturing geometry-induced acceleration, stagnation, and suction while omitting viscosity and separated wakes. The solver imports only a surface mesh and reuses precomputed velocity fields across inflow directions, enabling inexpensive label generation. In our benchmark, amortized labeling takes 0.111 s per example using four CPU threads. We pretrain a neural surrogate on these labels and fine-tune it on independent CFD datasets. Across five flow tasks, SimpFlow improves over training from scratch in all 24 task-budget settings. With fine-tuning fixed at 200 epochs, interpolation indicates that SimpFlow requires 35-68% fewer CFD training cases to match the error of scratch models trained at each task's largest data budget. These results demonstrate that simplified physical solutions can provide transferable supervision, offering a practical way to reduce the high-fidelity data requirements of fluid surrogates.

0.23