CS Paper Radar

Dense-Joint-Based Obstacle-Aided Locomotion with a Joint-Repositionable Snake Robot

Kyosuke Minomo, Ryo Takahashi, Kotaro Yasui, Yasutaka Nakashima, Motoji Yamamoto, Ayato Kanada

cs.RO ·submitted 2026-09-24 09:01 UTC · v1
published

Abstract

Obstacle-aided locomotion is a fundamental capability for snake robots to traverse complex environments. However, conventional rigid-link snake robots often suffer from stagnation or jamming caused by their low joint density (i.e., the number of joints per unit length). This results in discontinuous contact with obstacles, unlike the continuous adaptation of biological snakes. To investigate the effect of joint density on obstacle-aided locomotion performance, we utilized a joint-repositionable snake robot mechanism that decouples actuators from joints, enabling a high-density architecture. We developed two experimental models with identical total lengths but different joint densities (high-density and low-density) and conducted comparative propulsion experiments in obstacle environments with varying obstacle diameters. The experimental results demonstrate that the high-density model substantially suppresses the abrupt shifts in reaction forces that cause stagnation in the low-density model. By maintaining smooth contact points, the high-density configuration reduces power consumption and achieves stable, continuous propulsion. These results highlight high joint density as a key factor in improving the environmental adaptability of snake robots in complex terrains.

Comment
Accepted to the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

Autonomous Whole-body Loco-manipulation Using a Snake Robot

cs.RO eess.SY ·2026-11-06 ·Adarsh Salagame, Henry Noyes, Haroon Hublikar, Alireza Ramezani
published similarity 0.71
Abstract · Presented in IROS 2026

Snake robots can leverage their hyper-redundant morphology for both locomotion and manipulation through distributed body contact but whole-body loco-manipulation is particularly challenging since the entire body serves simultaneously as propulsive mechanism and manipulation tool Prior work on wheeled legged and snake robot platforms has decoupled these functions through dedicated appendages body segmentation or grippers We present closed-loop loco-manipulation with our snake robot COBRA without this distinction such that any part of the body may make contact We develop a contact-implicit dynamic model unifying robot-ground robot-object and object-ground interactions within a Moreau-Jean time-stepping framework and formulate a trajectory optimization over the full-order dynamics guided by a geometric planner and nominal proportional controller to autonomously push an object to a goal location during sidewinding We validate the planner and controller on hardware across varied configurations and present simulation results for a simplified trajectory optimization that resolves robot-object and object-ground contacts

0.31

S-Rolling: Steerable Rolling Gaits for Twistable Snake Robots in Low-Clearance Environments

cs.RO ·2026-10-21 ·Qingling Fan, Zhongqiang Ren
similarity 0.67
Abstract

Snake robots can traverse complex environments with limbless locomotion, but maneuvering in low-clearance environments remains challenging because a gait must maintain a small swept height while also providing planar steering. Existing rolling gaits preserve a low swept height body configuration but generally provide limited steering, whereas steering gaits often introduce vertical undulation and require additional clearance. With that in mind, this paper develops S-rolling, a steerable rolling gait that combines low swept height locomotion with planar maneuverability for twistable snake robots. S-rolling is designed using an S-shaped planar backbone curve, whose head and tail segments roll with independently controlled angular velocities, producing different motion modes. We derive its joint space gait equation, in which a central twist joint realizes the relative rotation between the two segments. We also develop a quasi-static kinematic model relating the segment rolling speeds to the linear and angular velocities of the robot. Real-robot experiments demonstrate the various motion modes, traversal through a 10 cm clearance test track, and maneuvering tasks beneath a large workpiece and a car chassis. In these low-clearance scenarios, S-rolling successfully performs approximately 90$^\circ$ and 180$^\circ$ heading changes, whereas the baseline rolling arc gait cannot change the robot heading.

0.25

Linear Twisting Sidewinding Gaits for Twistable Snake Robot Motion Planning on Complex Terrains

cs.RO ·2026-10-21 ·Qingling Fan, Zhongqiang Ren
similarity 0.64
Abstract

Sidewinding is an efficient gait for snake robots to locomote on various terrains, by undulating the backbone curve and shifting the contact segments along it. However, relying solely on undulatory motion limits the locomotive capability of snake robots, and combining it with twisting motion can improve their speed and robustness. This hypothesis has recently been verified by the rolling vector approach, which locomotes the robot like a differential-drive car. Yet its twisting is concentrated in a short buffer segment, imposing most of the workload on the two twist joints in the middle, which can often overburden the motors and limit its locomotion. With that in mind, this paper develops a new family of twisting sidewinding gaits that distribute the workload over the entire body with our proposed linear twisting function. Under matched turning speed and total output power, our gaits reduce the peak output power of a single twist joint by 42%. Real-robot experiments show that, with the reduced workload, our new gaits can locomote the robot in various terrains that the existing rolling vector approach cannot. Besides, our new gaits can move up to 49% faster than conventional sidewinding without twisting.

0.26

Spiderbot: An Open-Source Energy-Efficient Hexapod with Passive Gravity Compensation

cs.RO eess.SY ·2026-09-22 ·Ritwik Sharma, Vimarsh Shah, Saransh Agrawal
code/data similarity 0.59
Abstract · 8 pages

Hexapod robots can achieve static stability with fewer actuated joints than bipeds or quadrupeds, yet many platforms still use 3-DOF legs, increasing weight and continuous torque requirement with limited gain in locomotion capability on flat, inclined and moderately rough terrains. We release Spiderbot, an open-source hexapod that uses a 4-bar linkage with a passive spring to mechanically support body weight, with a 2-DOF per-leg design that substantially reduces energy consumption. This mechanism substantially offloads gravitational torque during standing stance consuming only 1.5W (reduction of over 90\% over the unsprung version and up to 96\% over other similar hexapods). The passive spring compensation extends to payloads of up to 3.25kg with no additional torque requirements. The platform enables long-duration deployments on a modest battery budget and costs under \$400, making it suitable for large-scale multi-agent experiments. We validate the locomotion capabilities of the platform with an RL policy trained in mjlab, including successful sim-to-real transfer, despite the complexity of the mechanism. The platform is evaluated on flat and rough terrains, slope up to $15^\circ$ and step obstacles. We release all the CAD files, assembling instructions, and full training and deployment code along with the model checkpoints at https://erc-bpgc.github.io/SpiderBot/.

0.27

Omnidirectional Amphibious Locomotion via Internal Mass Actuation

cs.RO ·2026-09-23 ·Niko Weaver, Boxi Xia, Li-Yu Lo, Yuhao Huang, Boyuan Chen
code/data similarity 0.55
Abstract

Field robots must traverse varied terrain and obstacles while remaining robust to water, debris, vegetation, and physical contact. We present MARBLE, a fully enclosed omnidirectional amphibious rolling robot driven entirely by internal mass redistribution. Three mutually orthogonal linear sliders shift internal masses to generate body rotation, while an orientation-aware controller maps planar velocity commands into slider positions. A rigid spherical shell encloses all active mechanisms and simultaneously serves as the terrestrial contact surface, buoyant enclosure, and mounting structure for passive fins that enable water-surface propulsion. Rotation of the same shell architecture hence produces rolling on land and surface propulsion in water without mechanical reconfiguration or separate locomotion actuators. The spherical morphology further allows the robot to accommodate changes in body orientation and contact location during direct interactions with terrain and obstacles. We evaluate MARBLE through omnidirectional locomotion characterization, traversal across heterogeneous terrestrial environments, aquatic surface locomotion, land-water transitions, and deliberate obstacle interactions. These experiments demonstrate how a single enclosed mechanical architecture can combine omnidirectional mobility, cross-medium locomotion, and tolerance to environmental contact. MARBLE provides a compact design for field mobility across heterogeneous terrain, obstacles, and land-water transitions. We will open-source all software and hardware design. Our website is https://generalroboticslab.com/MARBLE

0.44

Riemannian Optimization-based Whole-body Obstacle Avoidance for Mobile Continuum Robots in Cluttered Environments

cs.RO ·2026-11-04 ·Duo Tang, Ping Deng, Sophie Armanini, Yajing Shen, Toshio Fukuda +2 more
similarity 0.55
Abstract

Inspired by the coordination of global motion and local shape adaptation in snakes, elephant trunks, and octopus arms, we propose a unified planning and control framework for mobile continuum robots in cluttered and confined environments. Existing approaches often address high-level path planning and local motion control separately, limiting coordinated base-arm motion, kinematic consistency, and collision avoidance. Our framework integrates long-horizon trajectory planning with real-time geometric refinement under kinematic and environmental constraints. The global layer combines A* search with minimum-jerk planning to generate smooth reference trajectories. The local layer uses a geometry-consistent inverse kinematics solver and Riemannian optimization to coordinate mobile-base motion and continuum deformation while avoiding obstacles. We evaluate the framework through simulated pipe-traversal tasks with multiple baseline planners and real-world experiments involving navigation among dense obstacles and manipulation in confined spaces. Results demonstrate improved motion consistency, feasibility, and adaptability, supporting coordinated whole-body motion of mobile continuum robots in constrained environments.

0.27

Real-Time Whole-Body Safe Motion Generation for Multi-Segment Tendon-Driven Continuum Robots

cs.RO ·2026-09-22 ·Fangju Yang, Siyi Ma, Tonghao Guan, Tingcong Liu, Hang Yang +3 more
hot direction similarity 0.54
Abstract

Real-time motion generation for tendon-driven continuum robots requires accurate modeling of nonuniform bending and whole-body collision avoidance. This paper presents a unified actuation-space framework for planar multi-segment tendon-driven continuum robots. An energy-based variable-curvature model captures spatially varying tendon spacing and bending stiffness and provides analytical Jacobians for differential inverse kinematics and safety monitoring. A multipoint CBF-QP enforces backbone clearance under obstacle motion and actuation-velocity bounds, while its decision dimension depends only on the number of independently actuated segments. The model closely agrees with GVS references, with a maximum curvature error of $5.223 \times 10^{-2}\,\mathrm{m}^{-1}$. Over 100 MuJoCo trials, the proposed method achieves collision-free success rates of 96% and 100% in static and dynamic scenarios, respectively, compared with approximately 60% and 80% without CBF constraints. Hole-traversal tests further demonstrate safe motion in constrained environments. With 600 backbone monitoring points, the mean control-step time is 6.66 ms, demonstrating real-time whole-body safe motion generation.

0.29

Co-design of trajectory and morphology for a vertical jump-climbing robot

cs.RO ·2026-09-25 ·Christopher Y. Xu, Elliot W. Hawkes
similarity 0.54
Abstract · 8 pages

Animals such as squirrels and even bears have adapted to rapidly climb up trees and other complex vertical terrain, but achieving comparable agility has been a challenge for climbing robots. Existing robots often use walking gaits and move conservatively to stay in contact with the surface, which limits the range of dynamic maneuvers. In this paper we present a 290 g robot that, to our knowledge, is the first to climb vertically by bounding (with an aerial phase). We leverage a co-design workflow, in which the morphology and trajectory are jointly optimized for fast locomotion, subject to adhesion force limitations seen in spined grippers. The resulting trajectory includes a rapid maneuver that launches the robot vertically, and an aerial reorientation that brings the front grippers back to the surface using the rear leg as an inertial tail. We evaluate the resulting jump forces in 2D force space and demonstrate that the optimized morphology is capable of continuous climbing at a speed of 0.375 m/s (1.97 body lengths/s), and can also achieve ground locomotion and transition to a vertical surface. Our work proposes design insights for the jump-climbing maneuver and serves as an important step toward creating climbing robots with agility on par with that of animals.

0.34