CS Paper Radar

S-Rolling: Steerable Rolling Gaits for Twistable Snake Robots in Low-Clearance Environments

Qingling Fan, Zhongqiang Ren

cs.RO ·submitted 2026-10-21 09:33 UTC · v1

Abstract

Snake robots can traverse complex environments with limbless locomotion, but maneuvering in low-clearance environments remains challenging because a gait must maintain a small swept height while also providing planar steering. Existing rolling gaits preserve a low swept height body configuration but generally provide limited steering, whereas steering gaits often introduce vertical undulation and require additional clearance. With that in mind, this paper develops S-rolling, a steerable rolling gait that combines low swept height locomotion with planar maneuverability for twistable snake robots. S-rolling is designed using an S-shaped planar backbone curve, whose head and tail segments roll with independently controlled angular velocities, producing different motion modes. We derive its joint space gait equation, in which a central twist joint realizes the relative rotation between the two segments. We also develop a quasi-static kinematic model relating the segment rolling speeds to the linear and angular velocities of the robot. Real-robot experiments demonstrate the various motion modes, traversal through a 10 cm clearance test track, and maneuvering tasks beneath a large workpiece and a car chassis. In these low-clearance scenarios, S-rolling successfully performs approximately 90$^\circ$ and 180$^\circ$ heading changes, whereas the baseline rolling arc gait cannot change the robot heading.

Closest papers

Nearest neighbours by meaning across the whole index.

Linear Twisting Sidewinding Gaits for Twistable Snake Robot Motion Planning on Complex Terrains

cs.RO ·2026-10-21 ·Qingling Fan, Zhongqiang Ren
similarity 0.81
Abstract

Sidewinding is an efficient gait for snake robots to locomote on various terrains, by undulating the backbone curve and shifting the contact segments along it. However, relying solely on undulatory motion limits the locomotive capability of snake robots, and combining it with twisting motion can improve their speed and robustness. This hypothesis has recently been verified by the rolling vector approach, which locomotes the robot like a differential-drive car. Yet its twisting is concentrated in a short buffer segment, imposing most of the workload on the two twist joints in the middle, which can often overburden the motors and limit its locomotion. With that in mind, this paper develops a new family of twisting sidewinding gaits that distribute the workload over the entire body with our proposed linear twisting function. Under matched turning speed and total output power, our gaits reduce the peak output power of a single twist joint by 42%. Real-robot experiments show that, with the reduced workload, our new gaits can locomote the robot in various terrains that the existing rolling vector approach cannot. Besides, our new gaits can move up to 49% faster than conventional sidewinding without twisting.

0.26

Dense-Joint-Based Obstacle-Aided Locomotion with a Joint-Repositionable Snake Robot

cs.RO ·2026-09-24 ·Kyosuke Minomo, Ryo Takahashi, Kotaro Yasui, Yasutaka Nakashima, Motoji Yamamoto +1 more
published similarity 0.67
Abstract · Accepted to the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

Obstacle-aided locomotion is a fundamental capability for snake robots to traverse complex environments. However, conventional rigid-link snake robots often suffer from stagnation or jamming caused by their low joint density (i.e., the number of joints per unit length). This results in discontinuous contact with obstacles, unlike the continuous adaptation of biological snakes. To investigate the effect of joint density on obstacle-aided locomotion performance, we utilized a joint-repositionable snake robot mechanism that decouples actuators from joints, enabling a high-density architecture. We developed two experimental models with identical total lengths but different joint densities (high-density and low-density) and conducted comparative propulsion experiments in obstacle environments with varying obstacle diameters. The experimental results demonstrate that the high-density model substantially suppresses the abrupt shifts in reaction forces that cause stagnation in the low-density model. By maintaining smooth contact points, the high-density configuration reduces power consumption and achieves stable, continuous propulsion. These results highlight high joint density as a key factor in improving the environmental adaptability of snake robots in complex terrains.

0.50

Autonomous Whole-body Loco-manipulation Using a Snake Robot

cs.RO eess.SY ·2026-11-06 ·Adarsh Salagame, Henry Noyes, Haroon Hublikar, Alireza Ramezani
published similarity 0.66
Abstract · Presented in IROS 2026

Snake robots can leverage their hyper-redundant morphology for both locomotion and manipulation through distributed body contact but whole-body loco-manipulation is particularly challenging since the entire body serves simultaneously as propulsive mechanism and manipulation tool Prior work on wheeled legged and snake robot platforms has decoupled these functions through dedicated appendages body segmentation or grippers We present closed-loop loco-manipulation with our snake robot COBRA without this distinction such that any part of the body may make contact We develop a contact-implicit dynamic model unifying robot-ground robot-object and object-ground interactions within a Moreau-Jean time-stepping framework and formulate a trajectory optimization over the full-order dynamics guided by a geometric planner and nominal proportional controller to autonomously push an object to a goal location during sidewinding We validate the planner and controller on hardware across varied configurations and present simulation results for a simplified trajectory optimization that resolves robot-object and object-ground contacts

0.31

RESCUE Jumper: A Centimeter-Scale Rolling and Jumping Robot for Search and Rescue

cs.RO ·2026-11-17 ·Kiran Marques, Shashwat Singh, Ben D'Ambrosia, Zeynep Temel, Melisa Orta Martinez
similarity 0.56
Abstract · Lack of consent from co-authors

Centimeter-scale robots are promising for urban search and rescue because they can enter confined spaces that are inaccessible or unsafe for humans. However, their small size limits obstacle traversal after deployment. This paper presents the RESCUE Jumper, a 125 g mobile robot with a 6.2 cm width and 6.2 cm diameter wheels that combines ground rolling with jumping to traverse steps and gaps that exceeds its rolling capability. The RESCUE Jumper uses its two actuators for both rolling mode and jumping by reversing the direction of wheel motion. Forward wheel motion enables rolling, while reverse wheel motion winds a spring steel tail to store elastic potential energy and release it for jumping. The RESCUE Jumper varies tail winding speed to control jump direction, transitioning from backward to forward jumps as winding speed increases from 0.75 rad/s to 8.73 rad/s. The launch angle of the jumps ranges from 45 degree to -11 degree with respect to the vertical axis, reaching a maximum height of 9.2 cm and a maximum lateral displacement of 11.2 cm. We model the winding speed-dependent jumping behavior in three phases: tail release to determine the contact point and robot orientation, tail straightening until liftoff, and ballistic flight to predict jump height and lateral displacement. Finally, qualitative tests highlight the robot's locomotion in cluttered, real-world environments. The model and experiments presented in this work can inform future designs of space-constrained jump mechanisms in centimeter-scale robots for search and rescue and inspection in unstructured environments.

0.26

Co-design of trajectory and morphology for a vertical jump-climbing robot

cs.RO ·2026-09-25 ·Christopher Y. Xu, Elliot W. Hawkes
similarity 0.55
Abstract · 8 pages

Animals such as squirrels and even bears have adapted to rapidly climb up trees and other complex vertical terrain, but achieving comparable agility has been a challenge for climbing robots. Existing robots often use walking gaits and move conservatively to stay in contact with the surface, which limits the range of dynamic maneuvers. In this paper we present a 290 g robot that, to our knowledge, is the first to climb vertically by bounding (with an aerial phase). We leverage a co-design workflow, in which the morphology and trajectory are jointly optimized for fast locomotion, subject to adhesion force limitations seen in spined grippers. The resulting trajectory includes a rapid maneuver that launches the robot vertically, and an aerial reorientation that brings the front grippers back to the surface using the rear leg as an inertial tail. We evaluate the resulting jump forces in 2D force space and demonstrate that the optimized morphology is capable of continuous climbing at a speed of 0.375 m/s (1.97 body lengths/s), and can also achieve ground locomotion and transition to a vertical surface. Our work proposes design insights for the jump-climbing maneuver and serves as an important step toward creating climbing robots with agility on par with that of animals.

0.34

Stability Principle Inherent in Wheel Gait of Planar X-shaped Walker Generated Using Constant Torque Drive and Mechanical Stoppers

cs.RO ·2026-11-16 ·Fumihiko Asano, Cong Yan
top venue similarity 0.55
Abstract · 8 pages, 6 figures. Published in the Proceedings of IEEE ICRA 2026. This author version corrects the author names in one reference; the scie…

Since the late 19th century when the first walking toys were developed, it has been known that mechanical stoppers at the hip joint are crucial for generating stable passive dynamic walking. Recent research on passive-dynamic and limit-cycle walkers has also confirmed that mechanical stoppers at the hip and knee joints are effective for generating stable walking motion, but theoretical research on how this mechanical constraint enhances the overall gait stability remains insufficient. This paper introduces a planar X-shaped walker equipped with mechanical stoppers at the hip joint, and investigates the effect of the mechanical constraint on the stability of the wheel gait generated by constant torque drive on a downslope. By simply falling forward while using the stoppers to constrain itself to the target impact posture, the robot can generate a highly stable wheel gait. We divide the motion of one step into four phases, derive approximate analytical solutions for the state error transition function matrix in each phase using a linearized model, and analyze the increase or decrease in the state error norm using metrics such as its maximum singular value. Numerical simulations demonstrate that while two phases are unstable in terms of the increase in the state error norm, the remaining two phases are stable, resulting in overall asymptotic stability.

0.51

Morphology-Aware Human Motion Retargeting for Wheeled-Humanoid Loco-Manipulation

cs.RO ·2026-09-10 ·Chenbo Xia, Chao Ye
similarity 0.54
Abstract

Human-to-humanoid retargeting has largely been studied on legged platforms, while comparatively few wheeled-humanoid systems support coupled locomotion and manipulation from general human motion. Building on GMR's configurable general-motion retargeting and BeyondMimic's physically simulated R1 Pro learning framework, we present a reproducible pipeline that converts multi-dataset SMPLX motion into executable loco-manipulation behavior for the Galaxea R1 Pro wheeled humanoid. The robot has a planar three-wheel base, a serial torso, and two arms but no leg joints, so human lower-body motion must be redistributed across base motion and torso posture without sacrificing manipulation-relevant arm geometry. Our pipeline combines canonical body-shape preprocessing, planar-base normalization, morphology-aware differential inverse kinematics, shoulder-rooted hierarchical arm retargeting, and continuous torso substitution for bending and squatting. A reference-twist-driven planning layer then decodes planar base motion into continuous three-wheel steering and rolling commands subject to hysteresis, kinematic continuity, acceleration, and actuator-rate limits. Finally, a 21-dimensional BaseDecode policy is trained in Isaac Lab with directional joint-limit scaling, focused upper-body tracking, and a staged wheel-contact reward. The resulting system provides a complete bridge from human motion data to physically trackable wheeled-humanoid loco-manipulation rather than a visualization-only retargeter; quantitative policy comparisons remain scheduled for a later revision.

0.44

Omnidirectional Amphibious Locomotion via Internal Mass Actuation

cs.RO ·2026-09-23 ·Niko Weaver, Boxi Xia, Li-Yu Lo, Yuhao Huang, Boyuan Chen
code/data similarity 0.54
Abstract

Field robots must traverse varied terrain and obstacles while remaining robust to water, debris, vegetation, and physical contact. We present MARBLE, a fully enclosed omnidirectional amphibious rolling robot driven entirely by internal mass redistribution. Three mutually orthogonal linear sliders shift internal masses to generate body rotation, while an orientation-aware controller maps planar velocity commands into slider positions. A rigid spherical shell encloses all active mechanisms and simultaneously serves as the terrestrial contact surface, buoyant enclosure, and mounting structure for passive fins that enable water-surface propulsion. Rotation of the same shell architecture hence produces rolling on land and surface propulsion in water without mechanical reconfiguration or separate locomotion actuators. The spherical morphology further allows the robot to accommodate changes in body orientation and contact location during direct interactions with terrain and obstacles. We evaluate MARBLE through omnidirectional locomotion characterization, traversal across heterogeneous terrestrial environments, aquatic surface locomotion, land-water transitions, and deliberate obstacle interactions. These experiments demonstrate how a single enclosed mechanical architecture can combine omnidirectional mobility, cross-medium locomotion, and tolerance to environmental contact. MARBLE provides a compact design for field mobility across heterogeneous terrain, obstacles, and land-water transitions. We will open-source all software and hardware design. Our website is https://generalroboticslab.com/MARBLE

0.44