CS Paper Radar

Linear Twisting Sidewinding Gaits for Twistable Snake Robot Motion Planning on Complex Terrains

Qingling Fan, Zhongqiang Ren

cs.RO ·submitted 2026-10-21 09:19 UTC · v1

Abstract

Sidewinding is an efficient gait for snake robots to locomote on various terrains, by undulating the backbone curve and shifting the contact segments along it. However, relying solely on undulatory motion limits the locomotive capability of snake robots, and combining it with twisting motion can improve their speed and robustness. This hypothesis has recently been verified by the rolling vector approach, which locomotes the robot like a differential-drive car. Yet its twisting is concentrated in a short buffer segment, imposing most of the workload on the two twist joints in the middle, which can often overburden the motors and limit its locomotion. With that in mind, this paper develops a new family of twisting sidewinding gaits that distribute the workload over the entire body with our proposed linear twisting function. Under matched turning speed and total output power, our gaits reduce the peak output power of a single twist joint by 42%. Real-robot experiments show that, with the reduced workload, our new gaits can locomote the robot in various terrains that the existing rolling vector approach cannot. Besides, our new gaits can move up to 49% faster than conventional sidewinding without twisting.

Closest papers

Nearest neighbours by meaning across the whole index.

S-Rolling: Steerable Rolling Gaits for Twistable Snake Robots in Low-Clearance Environments

cs.RO ·2026-10-21 ·Qingling Fan, Zhongqiang Ren
similarity 0.81
Abstract

Snake robots can traverse complex environments with limbless locomotion, but maneuvering in low-clearance environments remains challenging because a gait must maintain a small swept height while also providing planar steering. Existing rolling gaits preserve a low swept height body configuration but generally provide limited steering, whereas steering gaits often introduce vertical undulation and require additional clearance. With that in mind, this paper develops S-rolling, a steerable rolling gait that combines low swept height locomotion with planar maneuverability for twistable snake robots. S-rolling is designed using an S-shaped planar backbone curve, whose head and tail segments roll with independently controlled angular velocities, producing different motion modes. We derive its joint space gait equation, in which a central twist joint realizes the relative rotation between the two segments. We also develop a quasi-static kinematic model relating the segment rolling speeds to the linear and angular velocities of the robot. Real-robot experiments demonstrate the various motion modes, traversal through a 10 cm clearance test track, and maneuvering tasks beneath a large workpiece and a car chassis. In these low-clearance scenarios, S-rolling successfully performs approximately 90$^\circ$ and 180$^\circ$ heading changes, whereas the baseline rolling arc gait cannot change the robot heading.

0.25

Dense-Joint-Based Obstacle-Aided Locomotion with a Joint-Repositionable Snake Robot

cs.RO ·2026-09-24 ·Kyosuke Minomo, Ryo Takahashi, Kotaro Yasui, Yasutaka Nakashima, Motoji Yamamoto +1 more
published similarity 0.64
Abstract · Accepted to the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

Obstacle-aided locomotion is a fundamental capability for snake robots to traverse complex environments. However, conventional rigid-link snake robots often suffer from stagnation or jamming caused by their low joint density (i.e., the number of joints per unit length). This results in discontinuous contact with obstacles, unlike the continuous adaptation of biological snakes. To investigate the effect of joint density on obstacle-aided locomotion performance, we utilized a joint-repositionable snake robot mechanism that decouples actuators from joints, enabling a high-density architecture. We developed two experimental models with identical total lengths but different joint densities (high-density and low-density) and conducted comparative propulsion experiments in obstacle environments with varying obstacle diameters. The experimental results demonstrate that the high-density model substantially suppresses the abrupt shifts in reaction forces that cause stagnation in the low-density model. By maintaining smooth contact points, the high-density configuration reduces power consumption and achieves stable, continuous propulsion. These results highlight high joint density as a key factor in improving the environmental adaptability of snake robots in complex terrains.

0.50

Autonomous Whole-body Loco-manipulation Using a Snake Robot

cs.RO eess.SY ·2026-11-06 ·Adarsh Salagame, Henry Noyes, Haroon Hublikar, Alireza Ramezani
published similarity 0.62
Abstract · Presented in IROS 2026

Snake robots can leverage their hyper-redundant morphology for both locomotion and manipulation through distributed body contact but whole-body loco-manipulation is particularly challenging since the entire body serves simultaneously as propulsive mechanism and manipulation tool Prior work on wheeled legged and snake robot platforms has decoupled these functions through dedicated appendages body segmentation or grippers We present closed-loop loco-manipulation with our snake robot COBRA without this distinction such that any part of the body may make contact We develop a contact-implicit dynamic model unifying robot-ground robot-object and object-ground interactions within a Moreau-Jean time-stepping framework and formulate a trajectory optimization over the full-order dynamics guided by a geometric planner and nominal proportional controller to autonomously push an object to a goal location during sidewinding We validate the planner and controller on hardware across varied configurations and present simulation results for a simplified trajectory optimization that resolves robot-object and object-ground contacts

0.31

Co-design of trajectory and morphology for a vertical jump-climbing robot

cs.RO ·2026-09-25 ·Christopher Y. Xu, Elliot W. Hawkes
similarity 0.58
Abstract · 8 pages

Animals such as squirrels and even bears have adapted to rapidly climb up trees and other complex vertical terrain, but achieving comparable agility has been a challenge for climbing robots. Existing robots often use walking gaits and move conservatively to stay in contact with the surface, which limits the range of dynamic maneuvers. In this paper we present a 290 g robot that, to our knowledge, is the first to climb vertically by bounding (with an aerial phase). We leverage a co-design workflow, in which the morphology and trajectory are jointly optimized for fast locomotion, subject to adhesion force limitations seen in spined grippers. The resulting trajectory includes a rapid maneuver that launches the robot vertically, and an aerial reorientation that brings the front grippers back to the surface using the rear leg as an inertial tail. We evaluate the resulting jump forces in 2D force space and demonstrate that the optimized morphology is capable of continuous climbing at a speed of 0.375 m/s (1.97 body lengths/s), and can also achieve ground locomotion and transition to a vertical surface. Our work proposes design insights for the jump-climbing maneuver and serves as an important step toward creating climbing robots with agility on par with that of animals.

0.34

LEAP: Gradient Flow Augmented Lagrangian Trajectory Optimization for Contact Constrained Robots

cs.RO ·2026-10-14 ·César E. Ramos Chuquiure, Ryan Tsai, Yutong Zhou, Zihang Huang, Vansh Thakur +6 more
similarity 0.54
Abstract

Generating dynamically feasible motions for legged and manipulating robots requires solving a large, nonlinear, non-convex optimal control problem (OCP) in which contact wrenches must satisfy friction-cone constraints throughout the motion, not only at isolated instants. Existing solvers are sensitive to the initial guess and scale poorly with the number of joints. This paper introduces LEAP, which transcribes the OCP with pseudospectral collocation and, instead of a Newton or SQP solve, integrates a primal--dual gradient flow of a Powell--Hestenes--Rockafellar augmented Lagrangian to compute a solution. Because the flow is stiff, this paper designs a linearly implicit integrator with a Gauss--Newton metric, momentum, and a merit-based step controller that keeps the augmented Lagrangian monotone. Across locomotion benchmarks on five robot platforms, from planar hoppers to 32-joint humanoids, LEAP is the only method to solve every tested problem, achieves substantial speedups over Crocoddyl and Aligator on several benchmarks, and reaches trackable references at smaller compute budgets. The resulting trajectories are validated by tracking them in a high-fidelity simulator and on hardware. We will make the code public upon final acceptance of this paper.

0.24

Spiderbot: An Open-Source Energy-Efficient Hexapod with Passive Gravity Compensation

cs.RO eess.SY ·2026-09-22 ·Ritwik Sharma, Vimarsh Shah, Saransh Agrawal
code/data similarity 0.53
Abstract · 8 pages

Hexapod robots can achieve static stability with fewer actuated joints than bipeds or quadrupeds, yet many platforms still use 3-DOF legs, increasing weight and continuous torque requirement with limited gain in locomotion capability on flat, inclined and moderately rough terrains. We release Spiderbot, an open-source hexapod that uses a 4-bar linkage with a passive spring to mechanically support body weight, with a 2-DOF per-leg design that substantially reduces energy consumption. This mechanism substantially offloads gravitational torque during standing stance consuming only 1.5W (reduction of over 90\% over the unsprung version and up to 96\% over other similar hexapods). The passive spring compensation extends to payloads of up to 3.25kg with no additional torque requirements. The platform enables long-duration deployments on a modest battery budget and costs under \$400, making it suitable for large-scale multi-agent experiments. We validate the locomotion capabilities of the platform with an RL policy trained in mjlab, including successful sim-to-real transfer, despite the complexity of the mechanism. The platform is evaluated on flat and rough terrains, slope up to $15^\circ$ and step obstacles. We release all the CAD files, assembling instructions, and full training and deployment code along with the model checkpoints at https://erc-bpgc.github.io/SpiderBot/.

0.27

Make it Walk: Computational Design of LEGO Walkers

cs.RO ·2026-10-21 ·Siqi Li, Fancheng Gao, Chi-Wing Fu, Peng Song
similarity 0.53
Abstract

LEGO walkers are walking automata constructed from modular LEGO Technic bricks. They exhibit intriguing locomotion and are also highly reconfigurable through the modular Technic bricks, making them widely applicable in education, recreation, and robotics research. However, existing LEGO walkers are designed mostly by reusing existing single-actuator walking mechanisms. Although the locomotion is stable, their fixed walking gaits limit their adaptability and versatility. This paper presents the first computational solution capable of designing LEGO walkers that not only walk stably, but also support a variety of walking gaits. Our idea is twofold. First, we control the foot motion trajectory of each leg mechanically via a specifically-designed gear-linkage mechanism, in which we incorporate a pair of 3D-printed non-circular gears to work with a LEGO Technic mechanism. Second, we drive each leg by an independent motor and synchronize the timings of multiple leg motions via a simple yet adaptable control algorithm, enabling stable and versatile locomotion. Importantly, we take this modeling as a foundation to co-design the morphology and control of the LEGO walkers to meet the target locomotion and appearance. Leveraging our approach, we created a variety of LEGO walkers, demonstrating various walking gaits and appearances, and fabricated some of them to show their locomotion capability in the real world.

0.22

When to Waddle: A Comparative Study of Bipedal Torso-Stabilization on Low-Friction Surfaces

cs.RO ·2026-09-18 ·Ben Gu, Naomi Oke, George Ortiz, Stacy Ashlyn, Cordelia Pride +2 more
similarity 0.53
Abstract

Low-friction surfaces challenge bipedal locomotion by limiting the contact forces available during stepping. Inspired by penguin waddling, we investigate how lateral torso motion and center of mass (COM) placement affect locomotion as surface friction changes. Using a five-actuator biped, we compare an upright-gait strategy with a penguin-inspired torso-over-stance-leg strategy across multiple COM placements in simulation and hardware. In the 3-D simulator MuJoCo, we sweep through sinusoidal leg and hip actuation parameters across four friction coefficients mu = 0.1, 0.3, 0.5, 0.7. In simulation, torso-over-stance-leg motion produces more successful controllers and higher forward speeds at low friction, with the highest speed occurring for the high-COM configuration. Hardware experiments show the same low-friction speed trend: at mu=0.12, torso-over-stance-leg motion increases forward speed and reduces cost of transport at both tested COM ratios, and the higher COM also improves both measures. The high-COM penguin configuration is the fastest and most energy efficient while maintaining low sideways foot motion. At mu=0.45, the COM trend reverses: the lower-COM configurations are faster and more energy efficient, while gait strategy has little effect on forward speed but still changes sideways foot motion. These results show that the effects of lateral torso motion and COM placement depend on the available friction, and that forward speed, energy use, and slip-related foot motion can be modulated with a penguin-inspired torso motion on hardware.

0.22