CS Paper Radar

RESCUE Jumper: A Centimeter-Scale Rolling and Jumping Robot for Search and Rescue

Kiran Marques, Shashwat Singh, Ben D'Ambrosia, Zeynep Temel, Melisa Orta Martinez

cs.RO ·submitted 2026-11-17 21:37 UTC · v2

Abstract

Centimeter-scale robots are promising for urban search and rescue because they can enter confined spaces that are inaccessible or unsafe for humans. However, their small size limits obstacle traversal after deployment. This paper presents the RESCUE Jumper, a 125 g mobile robot with a 6.2 cm width and 6.2 cm diameter wheels that combines ground rolling with jumping to traverse steps and gaps that exceeds its rolling capability. The RESCUE Jumper uses its two actuators for both rolling mode and jumping by reversing the direction of wheel motion. Forward wheel motion enables rolling, while reverse wheel motion winds a spring steel tail to store elastic potential energy and release it for jumping. The RESCUE Jumper varies tail winding speed to control jump direction, transitioning from backward to forward jumps as winding speed increases from 0.75 rad/s to 8.73 rad/s. The launch angle of the jumps ranges from 45 degree to -11 degree with respect to the vertical axis, reaching a maximum height of 9.2 cm and a maximum lateral displacement of 11.2 cm. We model the winding speed-dependent jumping behavior in three phases: tail release to determine the contact point and robot orientation, tail straightening until liftoff, and ballistic flight to predict jump height and lateral displacement. Finally, qualitative tests highlight the robot's locomotion in cluttered, real-world environments. The model and experiments presented in this work can inform future designs of space-constrained jump mechanisms in centimeter-scale robots for search and rescue and inspection in unstructured environments.

Comment
Lack of consent from co-authors

Closest papers

Nearest neighbours by meaning across the whole index.

Co-design of trajectory and morphology for a vertical jump-climbing robot

cs.RO ·2026-09-25 ·Christopher Y. Xu, Elliot W. Hawkes
similarity 0.59
Abstract · 8 pages

Animals such as squirrels and even bears have adapted to rapidly climb up trees and other complex vertical terrain, but achieving comparable agility has been a challenge for climbing robots. Existing robots often use walking gaits and move conservatively to stay in contact with the surface, which limits the range of dynamic maneuvers. In this paper we present a 290 g robot that, to our knowledge, is the first to climb vertically by bounding (with an aerial phase). We leverage a co-design workflow, in which the morphology and trajectory are jointly optimized for fast locomotion, subject to adhesion force limitations seen in spined grippers. The resulting trajectory includes a rapid maneuver that launches the robot vertically, and an aerial reorientation that brings the front grippers back to the surface using the rear leg as an inertial tail. We evaluate the resulting jump forces in 2D force space and demonstrate that the optimized morphology is capable of continuous climbing at a speed of 0.375 m/s (1.97 body lengths/s), and can also achieve ground locomotion and transition to a vertical surface. Our work proposes design insights for the jump-climbing maneuver and serves as an important step toward creating climbing robots with agility on par with that of animals.

0.34

A Long-Legged, Direct-Drive Monopedal Robot Achieves Exceptional Jump Height

cs.RO ·2026-09-24 ·Gihyeok Na, Justin K. Yim
similarity 0.59
Abstract · 8 pages, 12 figures, submitted to ICRA 2027

We demonstrate a jumping robot that reaches high (7.6 m) and fast (190 ms stance time) jumps from a single long leg driven by a direct-drive transmission, without elastic energy storage. At 281 g, it achieves the highest jump yet reported for an electrically actuated, spring-free system. The leg uses a new fabric-wrap transmission that provides a variable mechanical advantage, keeping a small electric motor near its peak power output through the stroke while bracing the long, lightweight leg against buckling. A balancing module at the top of the leg uses small propellers to control the leg's orientation on the ground and in the air, where the long leg provides a large moment arm for the control torques. The robot is validated outdoors with vertical jumps, attitude control on the ground and in flight, and tilted jumps.

0.24

S-Rolling: Steerable Rolling Gaits for Twistable Snake Robots in Low-Clearance Environments

cs.RO ·2026-10-21 ·Qingling Fan, Zhongqiang Ren
similarity 0.56
Abstract

Snake robots can traverse complex environments with limbless locomotion, but maneuvering in low-clearance environments remains challenging because a gait must maintain a small swept height while also providing planar steering. Existing rolling gaits preserve a low swept height body configuration but generally provide limited steering, whereas steering gaits often introduce vertical undulation and require additional clearance. With that in mind, this paper develops S-rolling, a steerable rolling gait that combines low swept height locomotion with planar maneuverability for twistable snake robots. S-rolling is designed using an S-shaped planar backbone curve, whose head and tail segments roll with independently controlled angular velocities, producing different motion modes. We derive its joint space gait equation, in which a central twist joint realizes the relative rotation between the two segments. We also develop a quasi-static kinematic model relating the segment rolling speeds to the linear and angular velocities of the robot. Real-robot experiments demonstrate the various motion modes, traversal through a 10 cm clearance test track, and maneuvering tasks beneath a large workpiece and a car chassis. In these low-clearance scenarios, S-rolling successfully performs approximately 90$^\circ$ and 180$^\circ$ heading changes, whereas the baseline rolling arc gait cannot change the robot heading.

0.25

OmniQuad: a Wheeled-Legged Hybrid Robot with Omnidirectional Wheels

cs.RO ·2026-10-28 ·Francesco Iotti, Alok Ranjan, Franco Angelini, Manolo Garabini
publishedhighly cited similarity 0.56
Abstract

Combining wheeled and legged locomotion within a single robotic platform offers the potential to harness the advantages of both systems. The development of such hybrid systems remains an active area of research. While legged robots exhibit remarkable adaptability for traversing uneven and rugged terrains, their relatively low speed limits their practicality in indoor environments. Conversely, wheeled robots demonstrate higher efficiency on flat surfaces but often encounter difficulties when navigating obstacles such as steps. This paper introduces OmniQuad, a novel hybrid robot that integrates mecanum wheels with legged locomotion to exploit the benefits of both modalities. Mecanum wheels provide omnidirectional mobility, enhancing the robot's manoeuvrability by enabling agile movement in confined spaces and the ability to maintain a consistent orientation during task execution. In this work, we first present the design of a custom wheeled-foot featuring mecanum wheels. Subsequently, we describe the complete robot assembly, comprising these wheeled feet and EM-Act actuators. Finally, we detail the control scheme developed to govern the OmniQuad and evaluate its performance through experimental trials conducted in both indoor and outdoor environments.

0.64

Stability Principle Inherent in Wheel Gait of Planar X-shaped Walker Generated Using Constant Torque Drive and Mechanical Stoppers

cs.RO ·2026-11-16 ·Fumihiko Asano, Cong Yan
top venue similarity 0.55
Abstract · 8 pages, 6 figures. Published in the Proceedings of IEEE ICRA 2026. This author version corrects the author names in one reference; the scie…

Since the late 19th century when the first walking toys were developed, it has been known that mechanical stoppers at the hip joint are crucial for generating stable passive dynamic walking. Recent research on passive-dynamic and limit-cycle walkers has also confirmed that mechanical stoppers at the hip and knee joints are effective for generating stable walking motion, but theoretical research on how this mechanical constraint enhances the overall gait stability remains insufficient. This paper introduces a planar X-shaped walker equipped with mechanical stoppers at the hip joint, and investigates the effect of the mechanical constraint on the stability of the wheel gait generated by constant torque drive on a downslope. By simply falling forward while using the stoppers to constrain itself to the target impact posture, the robot can generate a highly stable wheel gait. We divide the motion of one step into four phases, derive approximate analytical solutions for the state error transition function matrix in each phase using a linearized model, and analyze the increase or decrease in the state error norm using metrics such as its maximum singular value. Numerical simulations demonstrate that while two phases are unstable in terms of the increase in the state error norm, the remaining two phases are stable, resulting in overall asymptotic stability.

0.51

Learning Whole-Body Kinetic Coordination for Wheeled-Quadruped Long-Range Throwing

cs.RO ·2026-08-28 ·Qinglian Wu, Yidian Hu, Weiqi Fan, Yutian Zhang, Siyuan Ma +3 more
similarity 0.52
Abstract · 8 pages, 5 figures

Long-range throwing on unstructured terrain is a key capability for mobile robots in delivery and retrieval tasks, but it requires high release velocity, coordinated whole-body motion, and robustness to terrain-induced disturbances. We present a whole-body kinetic-coordination framework for a wheeled-quadruped manipulator that combines kinetic-chain arm modeling with SQP-based trajectory optimization and a reference-guided reinforcement learning policy for coordinated base motion. The manipulator is first reduced to a kinetic-chain model and optimized under kinematic and dynamic constraints to produce a high-speed throwing reference. On a stationary base, the optimized arm trajectory reaches a release speed of 12.75 m/s and a throwing distance of 16.68 m. When whole-body coordination is enabled, the system further increases the release speed to 16.64 m/s and the throwing distance to 28.25 m. We then integrate the mobility of the wheeled-quadruped platform and validate the complete policy through hardware experiments on flat ground, grass, slopes, and rough roads. The results show that kinetic-chain optimization and whole-body coordination together enable robust long-range throwing across diverse unstructured terrains.

0.20

Linear Twisting Sidewinding Gaits for Twistable Snake Robot Motion Planning on Complex Terrains

cs.RO ·2026-10-21 ·Qingling Fan, Zhongqiang Ren
similarity 0.52
Abstract

Sidewinding is an efficient gait for snake robots to locomote on various terrains, by undulating the backbone curve and shifting the contact segments along it. However, relying solely on undulatory motion limits the locomotive capability of snake robots, and combining it with twisting motion can improve their speed and robustness. This hypothesis has recently been verified by the rolling vector approach, which locomotes the robot like a differential-drive car. Yet its twisting is concentrated in a short buffer segment, imposing most of the workload on the two twist joints in the middle, which can often overburden the motors and limit its locomotion. With that in mind, this paper develops a new family of twisting sidewinding gaits that distribute the workload over the entire body with our proposed linear twisting function. Under matched turning speed and total output power, our gaits reduce the peak output power of a single twist joint by 42%. Real-robot experiments show that, with the reduced workload, our new gaits can locomote the robot in various terrains that the existing rolling vector approach cannot. Besides, our new gaits can move up to 49% faster than conventional sidewinding without twisting.

0.26

Collision-Free Is Not Enough: Passage-Conditioned Navigation for Wheeled-Legged Robots

cs.RO cs.AI ·2026-11-19 ·Wai Ka Sun, Waiyiu Pong, Bowen Wang
code/data similarity 0.52
Abstract · 43 pages, 21 figures, 23 tables

A collision-free detour can still bring a legged robot to the next stair or ledge a few centimetres or degrees off, and a fixed locomotion skill, factory or learned, can stall or fall. Existing methods prevent this with a robot model or extensive trial and error, but on a new site with unknown skills neither is available, so they cannot be used. We find that a single 27-minute teaching session already supplies what these methods have to derive or learn: for every stair and ledge, one crossing the skill has completed. Our method, passage-conditioned navigation, makes the route remember how each transition was entered, not only where the path went. It stores each taught crossing as an event and, without training or a robot model, enforces it after every local replan: before each ledge, an entry gate makes the robot turn or back up and retry if it is more than 10 cm or 10° off the taught crossing. Under localization noise, with path, gait schedule, and sensing unchanged, this raises the share of disturbed ledge crossings that stay within these limits from 24.1% to 88.6%. In contact simulation with our learned policies, a robot pushed off course before stairs never falls in 180 climbs, against 9 falls when the stored direction is ignored; pushed 1.2 m away, it rejoins the route, ending on average 0.14 m from it (1.10 m without rejoining), and finishes as often as an undisturbed robot. This suits any robot with fixed skills that repeats a route over terrain transitions, as in inspection and patrol, where one wrong entry can end the task. We deployed it in competition on a real wheeled-legged robot: over 271 m of multi-obstacle terrain spanning 7.0 m of elevation, it completed all six runs, won third place at the 2026 Global Open-source AI Challenge, which drew 2,999 submissions, and was the only finalist in its task to finish fully autonomously.

0.51