CS Paper Radar

A Long-Legged, Direct-Drive Monopedal Robot Achieves Exceptional Jump Height

Gihyeok Na, Justin K. Yim

cs.RO ·submitted 2026-09-24 20:32 UTC · v1

Abstract

We demonstrate a jumping robot that reaches high (7.6 m) and fast (190 ms stance time) jumps from a single long leg driven by a direct-drive transmission, without elastic energy storage. At 281 g, it achieves the highest jump yet reported for an electrically actuated, spring-free system. The leg uses a new fabric-wrap transmission that provides a variable mechanical advantage, keeping a small electric motor near its peak power output through the stroke while bracing the long, lightweight leg against buckling. A balancing module at the top of the leg uses small propellers to control the leg's orientation on the ground and in the air, where the long leg provides a large moment arm for the control torques. The robot is validated outdoors with vertical jumps, attitude control on the ground and in flight, and tilted jumps.

Comment
8 pages, 12 figures, submitted to ICRA 2027

Closest papers

Nearest neighbours by meaning across the whole index.

Spiderbot: An Open-Source Energy-Efficient Hexapod with Passive Gravity Compensation

cs.RO eess.SY ·2026-09-22 ·Ritwik Sharma, Vimarsh Shah, Saransh Agrawal
code/data similarity 0.66
Abstract · 8 pages

Hexapod robots can achieve static stability with fewer actuated joints than bipeds or quadrupeds, yet many platforms still use 3-DOF legs, increasing weight and continuous torque requirement with limited gain in locomotion capability on flat, inclined and moderately rough terrains. We release Spiderbot, an open-source hexapod that uses a 4-bar linkage with a passive spring to mechanically support body weight, with a 2-DOF per-leg design that substantially reduces energy consumption. This mechanism substantially offloads gravitational torque during standing stance consuming only 1.5W (reduction of over 90\% over the unsprung version and up to 96\% over other similar hexapods). The passive spring compensation extends to payloads of up to 3.25kg with no additional torque requirements. The platform enables long-duration deployments on a modest battery budget and costs under \$400, making it suitable for large-scale multi-agent experiments. We validate the locomotion capabilities of the platform with an RL policy trained in mjlab, including successful sim-to-real transfer, despite the complexity of the mechanism. The platform is evaluated on flat and rough terrains, slope up to $15^\circ$ and step obstacles. We release all the CAD files, assembling instructions, and full training and deployment code along with the model checkpoints at https://erc-bpgc.github.io/SpiderBot/.

0.27

Co-design of trajectory and morphology for a vertical jump-climbing robot

cs.RO ·2026-09-25 ·Christopher Y. Xu, Elliot W. Hawkes
similarity 0.61
Abstract · 8 pages

Animals such as squirrels and even bears have adapted to rapidly climb up trees and other complex vertical terrain, but achieving comparable agility has been a challenge for climbing robots. Existing robots often use walking gaits and move conservatively to stay in contact with the surface, which limits the range of dynamic maneuvers. In this paper we present a 290 g robot that, to our knowledge, is the first to climb vertically by bounding (with an aerial phase). We leverage a co-design workflow, in which the morphology and trajectory are jointly optimized for fast locomotion, subject to adhesion force limitations seen in spined grippers. The resulting trajectory includes a rapid maneuver that launches the robot vertically, and an aerial reorientation that brings the front grippers back to the surface using the rear leg as an inertial tail. We evaluate the resulting jump forces in 2D force space and demonstrate that the optimized morphology is capable of continuous climbing at a speed of 0.375 m/s (1.97 body lengths/s), and can also achieve ground locomotion and transition to a vertical surface. Our work proposes design insights for the jump-climbing maneuver and serves as an important step toward creating climbing robots with agility on par with that of animals.

0.34

Dynamics-Informed Reinforcement Learning for Agile and Energy-Efficient Locomotion of a Monopedal Hopping Quadcopter

cs.RO ·2026-09-14 ·Ruigang Chen, Qi Zhang, Zhicheng Zhong, Zhuorui Yun, Yizhar Or +1 more
similarity 0.60
Abstract · 9 pages, 10 figures

Although aerial-legged robots offer combined agility and efficiency, controlling high-speed hopping under complex hybrid dynamics is challenging. Reinforcement Learning (RL) is promising but prone to energy-inefficient "reward hacking". We propose a Dynamics-Informed RL framework for a monopedal hopping quadcopter. By embedding a target Specific Energy into the reward, we constrain the optimization to a physically viable energy manifold, ensuring stable hopping behaviour. By rewarding the phase-consistent behavior, it can encourage bio-inspired stance-phase impulse. Furthermore, penalizing the electro-mechanical power waste induces the motors generate an efficient impulse. This enables the policy to inject energy strictly during spring restitution without heuristic state machines. MuJoCo simulations validate robust height regulation and forward velocity tracking up to 2.0 m/s despite severe attitude-contact coupling. Ultimately, our approach yields a highly agile hopping gait, reducing energy consumption by 82% and 73% compared to hovering baselines and inefficiency baseline, respectively.

0.21

QLAUN: A Research-Oriented, Robust, Agile, Modular, and Affordable Torque-Controlled Quadruped Robot

cs.RO ·2026-09-03 ·Mohamad S. Moudallal, Noel J. Maalouf
published similarity 0.60
Abstract · Extended abstract presented at IEEE ICRA@40, Rotterdam, Netherlands, September 2024. 2 pages, 1 figure

QLAUN Bot (Quad-Legged Adaptive Unmanned Navigator Robot) is a torque-controlled quadruped robot that is research-oriented, cost-effective, and aimed at achieving simultaneous robustness and agility while being completely 3D-printed. It is a quadruped robot that is aimed at empowering robotics research at universities and research institutes in Lebanon and the MENA region. Using a novel electronics-free leg design strategy, we present a modular robot with interchangeable and easily replaceable legs. The 15 kg robot possesses 12 DoF (Degrees-of-Freedom) with three per leg, each paired with a completely 3D-printed Quasi-Direct Drive (QDD) actuator that consists of a brushless DC motor and a low-ratio gearbox transmission that is connected to a belt transmission system for significantly increasing the torque outputs at the joints. We present legs that have decoupled hip and knee actuators to improve the overall modularity of the robot. QLAUN is almost completely 3D-printed using polylactic acid (PLA) and assembled using off-the-shelf parts to create a robust, agile, and affordable robot for legged robot locomotion research. The legs possess joints with wide ranges of motion, including a continuous hip flexion-extension joint. A compliant foot, printed using TPU-95A is also implemented for alleviating hard impacts and handling terrain uncertainties. This extended abstract aims to introduce QLAUN, a novel platform for robotics research, emphasizing the design concepts and principles that underpin its development to the academic and research communities in the field of robotics.

0.34

Breaking speed scaling in quadrupedal robots via Huygens' coupled-pendulum dynamics

cs.RO ·2026-09-09 ·Yucheng Tao, Yongbin Jin, Shaowen Cheng, Xianwei Liu, Yanyan Yuan +6 more
similarity 0.59
Abstract

Achieving biological-level running speeds has largely been pursued through advances in control algorithms, which improve the utilization of existing hardware. However, the ultimate speed limits remain governed by the underlying force and torque requirements of rapid locomotion, which are typically addressed through increased actuator capacity. Inspired by Huygens' coupled pendulums, we demonstrate that superior locomotion can emerge from principled exploitation of intrinsic dynamics rather than brute-force hardware scaling. Inter-limb inertial coupling redistributes energy across the gait cycle and reduces peak joint torque required for rapid periodic motion, thereby expanding the achievable speed without proportional increases in actuator capability. Incorporating hardware parameters as additional design variables further extends this analysis into a co-optimization framework, enabling the systematic utilization of inertial coupling in robot design. Guided by this framework, a quadruped robot achieves a running speed of 10.74 m/s (Froude number 21.4) and completes a 100-meter sprint in 12.2 seconds, representing the first legged robot to surpass 10 m/s. These results establish inertial coupling as an underlying mechanism governing high-speed legged locomotion and highlight its role in reducing force requirements, offering new insights into the design of agile robotic systems.

0.24

RESCUE Jumper: A Centimeter-Scale Rolling and Jumping Robot for Search and Rescue

cs.RO ·2026-11-17 ·Kiran Marques, Shashwat Singh, Ben D'Ambrosia, Zeynep Temel, Melisa Orta Martinez
similarity 0.59
Abstract · Lack of consent from co-authors

Centimeter-scale robots are promising for urban search and rescue because they can enter confined spaces that are inaccessible or unsafe for humans. However, their small size limits obstacle traversal after deployment. This paper presents the RESCUE Jumper, a 125 g mobile robot with a 6.2 cm width and 6.2 cm diameter wheels that combines ground rolling with jumping to traverse steps and gaps that exceeds its rolling capability. The RESCUE Jumper uses its two actuators for both rolling mode and jumping by reversing the direction of wheel motion. Forward wheel motion enables rolling, while reverse wheel motion winds a spring steel tail to store elastic potential energy and release it for jumping. The RESCUE Jumper varies tail winding speed to control jump direction, transitioning from backward to forward jumps as winding speed increases from 0.75 rad/s to 8.73 rad/s. The launch angle of the jumps ranges from 45 degree to -11 degree with respect to the vertical axis, reaching a maximum height of 9.2 cm and a maximum lateral displacement of 11.2 cm. We model the winding speed-dependent jumping behavior in three phases: tail release to determine the contact point and robot orientation, tail straightening until liftoff, and ballistic flight to predict jump height and lateral displacement. Finally, qualitative tests highlight the robot's locomotion in cluttered, real-world environments. The model and experiments presented in this work can inform future designs of space-constrained jump mechanisms in centimeter-scale robots for search and rescue and inspection in unstructured environments.

0.26

Learning to Exploit Passive Dynamics for Energy-Efficient Target Hopping of a Spring-Legged Quadcopter

cs.RO cs.LG ·2026-09-14 ·Ruigang Chen, Qi Zhang, Zhicheng Zhong, Zhuorui Yun, Yizhar Or +1 more
similarity 0.58
Abstract · 8 pages, 10 figures

Combining aerial thrust with spring-loaded hopping makes monopedal quadcopters promising for locomotion over complex terrain, but heuristic proportional-integral-derivative (PID) tuning limits coordination between active thrust and passive contact dynamics. We present a direct estimated-state-to-motor Proximal Policy Optimization (PPO) policy that commands four motors without an explicit hopping state machine or low-level attitude PID. Its reward combines Energy-Manifold Shaping for mass-normalized vertical-energy tracking and apex-state anchoring with Efficiency Shaping, which uses a history-aware power estimator to penalize general power use, impose an additional airborne-power cost, and penalize airborne near-stationarity. In representative hardware runs, the PPO-based control stack reduced cycle-averaged measured electrical power by 30.7% and mean total normalized thrust by 49.8% relative to the tuned PID-based control stack, while retaining repeatable commanded-height hopping and more concentrated landings. These observations are consistent with improved use of passive dynamics and reduced measured electrical demand.

0.29

A Bi-level Co-design Framework for Lunar Monoped with 2D Jump and Landing Control

cs.RO eess.SY ·2026-10-27 ·Sanjay Ramkumar, Suraj Kumar
similarity 0.57
Abstract · 8 pages, 13 figures

Legged robots for lunar exploration must be designed for low gravity, where reduced contact forces and long flight phases make leg morphology and controller choice interdependent. We study this for a planar monoped in lunar gravity ($1.625$ m/s$^2$) using a bi-level co-design framework: a differential evolution outer loop searches over link lengths, and each candidate is evaluated on a vertical jump by either a quadratic program based task-space controller (QP-TSC) or a direct-collocation based trajectory optimization. The two controllers yield different optimal link lengths, and trajectory optimization outperforms the QP-TSC across most of the design space, with 17% lower Cost of Transport (COT) at their respective optima. We then extend to a 2D jump, where trajectory optimization with centroidal angular momentum regulation produces stable in-place and forward jumps, and an LQR controller absorbs impact and stabilizes the robot after touchdown. This is demonstrated on a baseline morphology with both links 0.3 m long.

0.17