CS Paper Radar

Cross-Material Support Transfer for Core-Loss Prediction Under Waveform Covariate Shift

Cong Yao, Chunye Gong

cs.LG cond-mat.mtrl-sci ·submitted 2026-09-15 05:11 UTC · v1

Abstract

Power magnetic materials are characterized on the sinusoidal and triangular waveforms that excitation hardware conveniently produces, whereas deployed converters expose cores to trapezoidal, PWM-shaped flux trajectories, so loss models must predict exactly where their training data are thinnest. The final test of the MagNet Challenge embeds a deliberately extreme instance of this characterization-deployment mismatch: for material D, trapezoids form 16.4% of the test set but only 1.4% of the training set. The 95th-percentile relative error, hereafter p95, of the best submission, built on sequential transfer learning, stalled at 15.9%, the worst among the five materials. This paper shows that the obstacle is missing information under covariate shift rather than class imbalance, and that the missing support can be borrowed from sibling materials instead of being extrapolated. Controlled experiments first refute the imbalance reading: four standard remedies fail, and raising the trapezoidal share to the test-set level degrades accuracy further. The proposed material-identity support transfer, MIST, then trains one 2784-parameter predictor jointly on all five challenge materials. Material identity enters through feature-wise linear modulation, or FiLM, the scarce material's true-label loss is reweighted, and material D receives no fine-tuning, so that the bias of its trapezoid-free training set is never re-installed. MIST lowers the five-seed material-D p95 from 20.39+/-2.03% to 12.38+/-0.92% and the trapezoidal-class p95 from 37.4+/-8.8% to 15.16+/-1.69%, surpassing the best submission with one-sixth of its parameters and no fine-tuning stage; removing material identity at matched capacity inflates the error by an order of magnitude. These results argue that scarce materials should be characterized jointly with their siblings.

Comment
10 pages, 7 figures, 5 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Cross-Material Magnetic Core Loss Prediction via Operating-Condition Matching and Partial Optimal Transport

cs.LG ·2026-10-10 ·Cong Yao, Yu Zheng, Zehao Hou, Rui Xu
similarity 0.70
Abstract · 11 pages, 9 figures, 6 tables

Cross-material magnetic core loss prediction requires adapting to new material responses with limited measurements. Global feature alignment overlooks differences in source and target excitation coverage. This motivates selecting comparable samples and controlling each source measurement's alignment contribution. This paper proposes T-PCOT, a Transformer transfer method based on condition-supported partial optimal transport. Frequency, flux excursion, temperature, and waveform descriptors define a sparse graph of comparable operating conditions. A capacity-constrained transport plan distributes alignment across source measurements and leaves costly target mass unmatched. The plan is constructed from measured inputs before training and guides local waveform-feature consistency. An importance-weighted sampling scheme preserves both uniform source regression and the transport objective during minibatch optimization. Experiments on three material pairs and three target label budgets show that T-PCOT reduces mean relative error (MRE) and 95th-percentile error (P95) relative to Transformer-based multiple-kernel maximum mean discrepancy (T-MKMMD) in all nine comparisons. Macro MRE decreases from 12.60% to 9.65%, and macro P95 from 30.94% to 25.06%, corresponding to relative reductions of 23.41% and 19.01%. Controlled comparisons and ablations examine the roles of input processing, condition correspondence, and source capacity. The results demonstrate the predictive advantage of organizing cross-material alignment through operating-condition support over the compared global alignment method. The proposed method achieves state-of-the-art predictive performance in magnetic core loss transfer learning.

0.18

CAHR-Net: Condition-Adaptive Hysteresis Reconstruction for Compact and Interpretable Magnetic Core Loss Modeling

cs.LG ·2026-09-02 ·Chunye Gong, Cong Yao
publishedunusual similarity 0.54
Abstract · 10 pages, 6 figures, 5 tables

Magnetic core loss originates in the hysteresis loop: the energy dissipated per excitation cycle equals the loop area, and frequency, temperature, and waveform shape set the loss by reshaping the loop geometry. Most existing models let these conditions act only on a terminal scalar - empirical equations fold them into fitted exponents, and data-driven predictors append them to encoded features - so no intermediate hysteresis representation remains for the conditions to reshape. This paper proposes CAHR-Net, a condition-adaptive hysteresis reconstruction network that injects the operating conditions where they physically act. It preserves the interpretable chain from flux density waveform to magnetic field reconstruction, loop-area integration, and power loss estimation, and uses feature-wise linear modulation to inject frequency, temperature, and waveform statistics into the intermediate reconstruction representation. A matched large-batch training protocol based on AdamW, cosine scheduling, and a staged reconstruction-to-power-loss objective is also reported, because the modulation pathway takes effect only within it. On the MagNet final A-E material protocol, CAHR-Net attains an average p95 relative error of 6.89% with only 1874 parameters, the lowest among all compared methods, together with a lower worst-material p95 than the strongest black-box solution at about 48x fewer parameters; it reduces the average p95 of the physical reconstruction backbone from 7.47% to 6.89% and the p95 of material D, the most difficult material, from 16.40% to 14.87%. Ablation and condition-slice analyses attribute the improvement to the coupling of physical loop reconstruction, structured condition modulation, and the matched optimization trajectory.

0.62

The Neuro-Physical Inverter: A Modular Framework for Magnetotelluric Inversion Coupling Ensemble Conditioning with Residual Learning

cs.LG ·2026-10-02 ·Jae Deok Kim, Sai Ravela, Rob. L. Evans
publishedunusual similarity 0.52
Abstract · Accepted by IEEE TGRS

We present the Neuro-Physical Inverter (NPI), a modular, uncertainty-aware framework for geophysical inversion that couples ensemble-based conditioning with constrained residual learning, demonstrated in the 1D magnetotelluric (MT) setting as a controlled testbed. The framework operates in two stages. An Ensemble-Conditional Gaussian Process (EnsCGP) conditions a prior ensemble of resistivity models on the observed response, producing a physically admissible reference ensemble. A residual-learning neural network then predicts targeted corrections to this reference, trained on synthetic data and fine-tuned per station for field application through a physics-coupled objective. Because an ensemble is conditioned, refined, and propagated through both stages, every estimate carries an associated ensemble spread. Synthetic experiments show that NPI systematically reduces ensemble-mean error without destabilizing the ensemble. Applied to broadband MT data from the Gabbs Valley geothermal region (Nevada, USA), NPI reduces the across-station mean misfit over the mid-period band while retaining comparable ensemble spread. The propagated ensemble yields a factor of uncertainty that serves as an operational measure of constraint within the assumed model class. Both stages are dimension-agnostic in formulation, and the design principles established here are intended to scale to higher-dimensional parameterizations.

0.57

Adapting neural operators for mechanics decisions under changing operating conditions

cs.CE cs.LGmath.NA ·2026-09-27 ·Prashant K. Jha, Koffi Enakoutsa, Ian Galloway, Henry Anderson
similarity 0.51
Abstract · 33 pages, 16 figures

Neural operators can accelerate repeated nonlinear mechanics calculations, but their accuracy can deteriorate as operating conditions move beyond the training range. This work studies whether high-fidelity solutions acquired during use can be reused to adapt a neural operator and improve subsequent mechanics-based command selection. Two hard-magnetic soft-material systems are simulated using high-fidelity finite-element (FE) models, providing reference solutions for evaluating surrogate predictions and selected commands. A neural operator predicts deformation from known material, loading, and magnetic-field inputs, while an empirical error estimator determines which predictions may be used for command selection. Selected FE evaluations supplement these predictions, and their complete loading paths are retained for periodic updates of the neural operator and estimator. In both examples, the fixed operator loses substantial accuracy when stiffness and loading move outside the training range. Updates using 16 acquired paths recover much of the lost accuracy while preserving accuracy in the nominal regime. Under the same FE evaluation budget, the updated operators also improve command selection, although the benefit varies with the operating condition. Error estimation is less consistent, with inaccurate predictions sometimes accepted and accurate predictions rejected. These results demonstrate that reusing high-fidelity loading paths can extend the useful operating range of a neural operator. However, improved forward accuracy alone does not guarantee reliable prediction acceptance, highlighting prediction-specific error assessment as a separate requirement for trustworthy decision making.

0.36

TLDChoiceNet: Quantitatively Choosing a Transfer Learning Dataset

cs.CV cs.AI ·2026-08-10 ·Jing Ning, James D. Braza
similarity 0.51
Abstract

Transfer learning is particularly useful in settings with limited training data, and within image classification it is common to transfer learn upon massive datasets like ImageNet , CIFAR-100, or COCO . Qualitatively, it seems a transfer learning dataset should have both more classes and more examples per class than the fine tuning dataset; however, a quantitative method to choose the best transfer learning dataset does not currently exist. In this paper, we design TLDChoiceNet, a model to choose the best transfer learning dataset given a fine tuning dataset by predicting the test-set accuracy after fine-tuning. A simple version 1 achieves 0.154 MSE on the test dataset, while a version 2 leveraging an ImageNet pre-trained ResNet50 v2 embedding with per-class information attains a 5X lower MSE of 0.031. We further design two metrics that enable an unsupervised method of choosing an optimal transfer learning dataset: distribution distance (DD), which linearly regresses against fine-tune accuracy with an R2 of 0.89, and average class correlation (ACC), which improves the R2 to 0.97. Our results underscore that a dataset's low-level statistics can explain the transfer learning effect, and that using a pre-trained ImageNet can embed different classes further apart in latent feature space.

0.04

Inclusive electron-nucleus cross section models from domain adaptation

cs.LG hep-phhep-exnucl-ex+1 ·2026-09-08 ·Krzysztof M. Graczyk, Beata E. Kowal, Rwik Dharmapal Banerjee, Jose Luis Bonilla, Hemant Prasad +1 more
similarity 0.50
Abstract · 19 pages, 27 figures, 2 tables

We apply transfer learning (TL) to construct data-driven models of inclusive electron-nucleus cross sections. Starting from an ensemble of deep neural networks pretrained on \(^{12}\)C data, we fine-tune the models separately for \(^{3}\)He, \(^{6}\)Li, \(^{16}\)O, \(^{27}\)Al, \(^{40}\)Ca, and \(^{56}\)Fe. The resulting models improve for all targets, marginally so for oxygen, where the carbon baseline is already adequate, although their predictive robustness depends on the amount, coverage, and precision of the available target data. We systematically study how model performance depends on the number of fine-tuned layers, on the fraction and selection of the training data, and on the overlap between the source and target kinematic domains. The layer-wise analysis shows that oxygen requires only shallow adaptation, whereas helium, calcium, and iron require substantially deeper fine-tuning. Lithium represents the least robust case because of its limited dataset, while aluminum demonstrates a strong sensitivity to a small subset of highly constraining measurements. For selected kinematic configurations outside the coverage of the carbon training data, the adapted models remain consistent with the measurements within their estimated uncertainties. Finally, we compare the resulting predictions with those of the phenomenological F1F2 model.

0.27

MagLearn 2: High-Fidelity, Saturation-Aware, and History-Efficient Sequence-to-sequence Modeling of Transient B-H Behaviour Under PWM Excitation

eess.SY ·2026-10-02 ·Jingrong Yang, Binyu Cui, Yuming Huo, Lizhong Zhang, Alfonso Martinez +2 more
similarity 0.49
Abstract · Submitted to IEEE Transactions on Power Electronics (TPEL) for peer review. An earlier conference version of this work was published in IEEE…

Accurate transient B-H modeling under pulsewidth-modulated (PWM) excitation is challenging since the magnetic-field response depends on both the instantaneous flux density and the preceding magnetisation trajectory. Although sequence-to-sequence models enable waveform prediction, existing studies have not jointly addressed how much magnetic history is required, how saturation region should be handled, and how trained models can be adapted to unseen materials. To address these gaps, this paper presents MagLearn 2, a condition-aware, short-window LSTM-based sequence-to-sequence framework for reconstructing the future H(t) response from the historical B(t) and H(t) trajectories. A saturation-aware auxiliary module selectively replaces saturation-dominated predictions within the complete waveform forecast. In a representative saturated 3C90 case, the auxiliary module reduces the sequence-level relative RMSE from 67.84% to 9.19%. To understand how much the history samples contributes to the predictions, an occlusion-based sensitivity analysis is conducted to quantifies the contribution of magnetic history and reveals that that the information most relevant to prediction is concentrated near the forecast boundary. In the independent evaluation for MagNet Challenge II, the proposed framework's best-performing model achieved the lowest reported average RMSE to date on the sequence-prediction task at 2.2%.

0.56

A Data-Driven, Gain-Scheduled Equivalent Circuit for the B-H Behavior of Power Ferrites

eess.SY ·2026-11-01 ·Wilhelm Kirchgässner
similarity 0.49
Abstract

An equivalent circuit for the dynamic B-H behavior of power ferrites is identified from measured transients. It consists of classical elements of hysteresis modeling: a nonlinear inductor for the reversible curve, six viscous play branches (inductors in series with diode-bridge sliders) that form a Prandtl-Ishlinskii model, two R-L branches for the magnetic after-effect, a mean-field feedback of H as in the Jiles-Atherton model, and a measurement path. All elements are positive apart from the feedback sources, and the circuit can run in SPICE. Discretized at the sampling step, the circuit is a difference equation with 32 parameters per material, fitted by backpropagation through time. On the 15 materials of the MagNet Challenge 2, the mean sequence relative error is 7.33 % against 7.77 % for the challenge-winning recurrent network with 336 parameters, and the circuit is more accurate on 12 of the 15 materials. The accuracy can be scaled up by gain scheduling, where a small network per material sets the element values at every step from the excitation, while the hysteresis memory stays in the circuit, such that the error drops to 5.25 % with 656 parameters per material. Thus, an interpretable model is demonstrated that achieves state-of-the-art accuracy.

0.29