CS Paper Radar

A Data-Driven, Gain-Scheduled Equivalent Circuit for the B-H Behavior of Power Ferrites

Wilhelm Kirchgässner

eess.SY ·submitted 2026-11-01 21:35 UTC · v1

Abstract

An equivalent circuit for the dynamic B-H behavior of power ferrites is identified from measured transients. It consists of classical elements of hysteresis modeling: a nonlinear inductor for the reversible curve, six viscous play branches (inductors in series with diode-bridge sliders) that form a Prandtl-Ishlinskii model, two R-L branches for the magnetic after-effect, a mean-field feedback of H as in the Jiles-Atherton model, and a measurement path. All elements are positive apart from the feedback sources, and the circuit can run in SPICE. Discretized at the sampling step, the circuit is a difference equation with 32 parameters per material, fitted by backpropagation through time. On the 15 materials of the MagNet Challenge 2, the mean sequence relative error is 7.33 % against 7.77 % for the challenge-winning recurrent network with 336 parameters, and the circuit is more accurate on 12 of the 15 materials. The accuracy can be scaled up by gain scheduling, where a small network per material sets the element values at every step from the excitation, while the hysteresis memory stays in the circuit, such that the error drops to 5.25 % with 656 parameters per material. Thus, an interpretable model is demonstrated that achieves state-of-the-art accuracy.

Closest papers

Nearest neighbours by meaning across the whole index.

CAHR-Net: Condition-Adaptive Hysteresis Reconstruction for Compact and Interpretable Magnetic Core Loss Modeling

cs.LG ·2026-09-02 ·Chunye Gong, Cong Yao
publishedunusual similarity 0.56
Abstract · 10 pages, 6 figures, 5 tables

Magnetic core loss originates in the hysteresis loop: the energy dissipated per excitation cycle equals the loop area, and frequency, temperature, and waveform shape set the loss by reshaping the loop geometry. Most existing models let these conditions act only on a terminal scalar - empirical equations fold them into fitted exponents, and data-driven predictors append them to encoded features - so no intermediate hysteresis representation remains for the conditions to reshape. This paper proposes CAHR-Net, a condition-adaptive hysteresis reconstruction network that injects the operating conditions where they physically act. It preserves the interpretable chain from flux density waveform to magnetic field reconstruction, loop-area integration, and power loss estimation, and uses feature-wise linear modulation to inject frequency, temperature, and waveform statistics into the intermediate reconstruction representation. A matched large-batch training protocol based on AdamW, cosine scheduling, and a staged reconstruction-to-power-loss objective is also reported, because the modulation pathway takes effect only within it. On the MagNet final A-E material protocol, CAHR-Net attains an average p95 relative error of 6.89% with only 1874 parameters, the lowest among all compared methods, together with a lower worst-material p95 than the strongest black-box solution at about 48x fewer parameters; it reduces the average p95 of the physical reconstruction backbone from 7.47% to 6.89% and the p95 of material D, the most difficult material, from 16.40% to 14.87%. Ablation and condition-slice analyses attribute the improvement to the coupling of physical loop reconstruction, structured condition modulation, and the matched optimization trajectory.

0.63

Adapting neural operators for mechanics decisions under changing operating conditions

cs.CE cs.LGmath.NA ·2026-09-27 ·Prashant K. Jha, Koffi Enakoutsa, Ian Galloway, Henry Anderson
similarity 0.51
Abstract · 33 pages, 16 figures

Neural operators can accelerate repeated nonlinear mechanics calculations, but their accuracy can deteriorate as operating conditions move beyond the training range. This work studies whether high-fidelity solutions acquired during use can be reused to adapt a neural operator and improve subsequent mechanics-based command selection. Two hard-magnetic soft-material systems are simulated using high-fidelity finite-element (FE) models, providing reference solutions for evaluating surrogate predictions and selected commands. A neural operator predicts deformation from known material, loading, and magnetic-field inputs, while an empirical error estimator determines which predictions may be used for command selection. Selected FE evaluations supplement these predictions, and their complete loading paths are retained for periodic updates of the neural operator and estimator. In both examples, the fixed operator loses substantial accuracy when stiffness and loading move outside the training range. Updates using 16 acquired paths recover much of the lost accuracy while preserving accuracy in the nominal regime. Under the same FE evaluation budget, the updated operators also improve command selection, although the benefit varies with the operating condition. Error estimation is less consistent, with inaccurate predictions sometimes accepted and accurate predictions rejected. These results demonstrate that reusing high-fidelity loading paths can extend the useful operating range of a neural operator. However, improved forward accuracy alone does not guarantee reliable prediction acceptance, highlighting prediction-specific error assessment as a separate requirement for trustworthy decision making.

0.36

Cross-Material Support Transfer for Core-Loss Prediction Under Waveform Covariate Shift

cs.LG cond-mat.mtrl-sci ·2026-09-15 ·Cong Yao, Chunye Gong
similarity 0.49
Abstract · 10 pages, 7 figures, 5 tables

Power magnetic materials are characterized on the sinusoidal and triangular waveforms that excitation hardware conveniently produces, whereas deployed converters expose cores to trapezoidal, PWM-shaped flux trajectories, so loss models must predict exactly where their training data are thinnest. The final test of the MagNet Challenge embeds a deliberately extreme instance of this characterization-deployment mismatch: for material D, trapezoids form 16.4% of the test set but only 1.4% of the training set. The 95th-percentile relative error, hereafter p95, of the best submission, built on sequential transfer learning, stalled at 15.9%, the worst among the five materials. This paper shows that the obstacle is missing information under covariate shift rather than class imbalance, and that the missing support can be borrowed from sibling materials instead of being extrapolated. Controlled experiments first refute the imbalance reading: four standard remedies fail, and raising the trapezoidal share to the test-set level degrades accuracy further. The proposed material-identity support transfer, MIST, then trains one 2784-parameter predictor jointly on all five challenge materials. Material identity enters through feature-wise linear modulation, or FiLM, the scarce material's true-label loss is reweighted, and material D receives no fine-tuning, so that the bias of its trapezoid-free training set is never re-installed. MIST lowers the five-seed material-D p95 from 20.39+/-2.03% to 12.38+/-0.92% and the trapezoidal-class p95 from 37.4+/-8.8% to 15.16+/-1.69%, surpassing the best submission with one-sixth of its parameters and no fine-tuning stage; removing material identity at matched capacity inflates the error by an order of magnitude. These results argue that scarce materials should be characterized jointly with their siblings.

0.33

MagLearn 2: High-Fidelity, Saturation-Aware, and History-Efficient Sequence-to-sequence Modeling of Transient B-H Behaviour Under PWM Excitation

eess.SY ·2026-10-02 ·Jingrong Yang, Binyu Cui, Yuming Huo, Lizhong Zhang, Alfonso Martinez +2 more
similarity 0.49
Abstract · Submitted to IEEE Transactions on Power Electronics (TPEL) for peer review. An earlier conference version of this work was published in IEEE…

Accurate transient B-H modeling under pulsewidth-modulated (PWM) excitation is challenging since the magnetic-field response depends on both the instantaneous flux density and the preceding magnetisation trajectory. Although sequence-to-sequence models enable waveform prediction, existing studies have not jointly addressed how much magnetic history is required, how saturation region should be handled, and how trained models can be adapted to unseen materials. To address these gaps, this paper presents MagLearn 2, a condition-aware, short-window LSTM-based sequence-to-sequence framework for reconstructing the future H(t) response from the historical B(t) and H(t) trajectories. A saturation-aware auxiliary module selectively replaces saturation-dominated predictions within the complete waveform forecast. In a representative saturated 3C90 case, the auxiliary module reduces the sequence-level relative RMSE from 67.84% to 9.19%. To understand how much the history samples contributes to the predictions, an occlusion-based sensitivity analysis is conducted to quantifies the contribution of magnetic history and reveals that that the information most relevant to prediction is concentrated near the forecast boundary. In the independent evaluation for MagNet Challenge II, the proposed framework's best-performing model achieved the lowest reported average RMSE to date on the sequence-prediction task at 2.2%.

0.57

From Forecasting to Feedback: Evaluating Learned Dynamics for Tokamak Control

cs.AI physics.plasm-phcs.LG ·2026-10-27 ·Guoyang Shi, Siqi Ding, Xuanhe Wang, Pei Guo, Changquan Yu +5 more
similarity 0.45
Abstract

Learned temporal models are moving beyond offline forecasting toward interactive environments for decision making, yet logged-trajectory accuracy need not predict closed-loop behavior under policies optimized in the learned model. This forecasting-control gap matters in tokamak magnetic control, where coupled plasma-circuit dynamics and actuator constraints can amplify errors through feedback. Using a calibrated free-boundary Grad-Shafranov solver, we collect four datasets in a 2x2 design over physics-parameter and current-reference coverage. At matched budgets of 500, 1k, 3k, and 5k rollouts, we train 16 action-conditioned Transformers; PPO policies optimized in the 5k surrogates are then evaluated without adaptation on six reference-solver conditions. Only joint-coverage D4 shows monotonically decreasing cross-condition mean error, whereas D1 improves in distribution but degrades out of distribution. Binary completion masks substantial closed-loop differences: D2-D4 each complete 83.3% of conditions, but reach on average 99.0%, 94.7%, and 90.5% of the evaluation horizon, while their worst conditions reach 94.2%, 68.2%, and 43.2%. Policies trained with action noise complete 5/24 matched conditions, compared with 19/24 under nominal training, and have a lower mean horizon-capped episode length. Based on one trained policy per configuration and one evaluation realization per condition, the results support combining prediction error, episode completion, condition-level duration, and tracking quality.

0.17

Data-Free Weak-Form Staggered Neural Operators for Magneto-Mechanical Coupling in Finite-Strain Elastomers

cs.CE ·2026-10-02 ·Alireza Yazdandousthamedani, Ahmad Moeineddin, Reza Najian Asl, Shahed Rezaei, Michael Kaliske
similarity 0.45
Abstract

Magneto-active elastomers, as a class of smart materials, exhibit strongly coupled magnetic and mechanical behavior at finite strains. Considering variations in microstructure, material properties, and geometry can lead to computationally expensive analyses. Building on the finite operator learning (FOL) framework, this study develops a data-free, physics-informed operator-learning framework for families of coupled finite-strain magneto-mechanical boundary-value problems. The governing magnetostatic and mechanical equations are enforced through finite-element weak-form residuals, allowing the neural operators to be trained without labeled finite-element solution data. The main contribution of this study is the development of a weak-form staggered neural operator (WSNO) framework for strongly coupled magneto-mechanical saddle-point problems. Separate magnetic and mechanical neural operators are trained alternately using a staggered optimization strategy, while their physical coupling is retained through the constitutive relations and residual evaluations. The resulting framework learns mappings from parameterized material and geometric descriptions to the corresponding coupled magnetic and mechanical solution fields. The proposed framework is investigated across several settings, including heterogeneous random-inclusion microstructures, varying magnetic phase contrast, area-fraction-dependent geometries, strongly out-of-distribution material morphologies, and three-dimensional geometry-parametric problems. In addition, the learned operator is combined with a neural-initialized Newton strategy, in which the nonlinear finite-element solver is initialized using the neural prediction. The results demonstrate that the proposed operator-learning framework can accurately capture coupled magneto-mechanical responses across a broad range of parametric problem settings.

0.15

Physics-Guided Inferencer-in-the-Loop Digital-Twin for Real-Time Adaptive Emulation of Nonlinear PMSMs

eess.SY ·2026-10-28 ·Songyang Zhang, Yuzhong Zhang, Venkata Dinavahi
similarity 0.45
Abstract

A real-time digital-twin (RTDT) of a permanent magnet synchronous machine (PMSM) allows drive controllers to be tested in hardware-in-the-loop (HIL) before they meet the real machine. Its machine model rests on identified parameters or flux look-up tables (LUTs) from finite-element analysis (FEA) or characterization tests; the maps are regenerated offline when the machine changes, and online estimators track a few parameters such as resistance and PM flux. This article makes the executed model learnable from reference data. A physics-guided machine learning (PGML) network advances the currents and predicts torque in one step, trained with analytical one-step labels. In the proposed Inferencer-in-the-Loop (IIL) architecture, a GPU retrains the network while a field-programmable gate array (FPGA) executes the last accepted weights. For damper circuits, shifted parameters, and an FEA-calibrated saturated machine, one kernel form reaches average normalized mean absolute errors (NMAEs) of 0.19%-0.67% at measured FPGA kernel latencies of 0.30-0.34 $μ$s, and retraining for a shifted machine nears its final loss within 94 s. On a magnetically linear 200-W drive, a residual form corrects the analytical step and learns its physical parameters from operating data; each step takes under 2.5 $μ$s, 20 times faster than real time and ahead of the physical drive's measurements even at 20-kHz sampling. On six held-out runs (1193 s), its $i_q$ error is 5.9%-9.4% of measured RMS, against 10.4%-13.2% for an independently fitted grey-box model, and over 30 min of loaded heating its online-updated heads track a 4.1% winding-resistance rise with an RMS error of 0.44 m$Ω$.

0.29

Data Driven Modeling of a Magnetic Newton's Cradle using the Optimization of a Discrete Loss

cs.CE physics.class-phphysics.comp-ph ·2026-10-29 ·Dimitris Koumoutsakos, Sergey Litvinov
similarity 0.44
Abstract · 30 pages, 19 figures, 8 tables

We investigate the dynamics of a magnetic Newton's cradle (MNC) using experiments, simulations through forward and inverse data driven models. In the MNC magnetic forces replace the instantaneous elastic collisions of the classical design. We compare point-dipole and finite-current-loop interaction models, identifying their parameters from direct measurements as well as through pendulum trajectories using the method of Optimizing a Discrete Loss (ODIL). For a synthetic three-pendulum twin, ODIL reproduces discretized trajectories to round-off accuracy and infers accurately magnet strength and damping from sparse data even when only one pendulum is observed. Model comparison shows that the point-dipole model compensates for near-field errors by underestimating the magnetic moment and produces structured residuals at each momentum transfer. The current-loop model removes this bias and, on full-precision recordings, also recovers the magnet radius. The continuous magnetic coupling reproduces the classical cradle's key behavior while enabling richer dynamics, including $N$ normal modes and a static repulsion offset. These results demonstrate that ODIL can infer physical parameters, and quantify model-form errors from sparse, noisy observations. Ultimately, this work establishes the magnetic Newton's cradle not merely as a physical curiosity, but as a rigorously quantifiable testbed for computational inverse modeling.

0.29