CS Paper Radar

Fiber-Normalized Manipulability and Determinant Proxies: Intrinsic Redundancy Optimization Across and Within Task Fibers

Antonio Franchi, Mirko Mizzoni

cs.RO ·submitted 2026-09-25 23:33 UTC · v1

Abstract

This work establishes that determinant-based manipulability is an exact objective for fixed-task redundancy optimization, despite its dependence on task coordinates and the choice of task-space metric used for volume measurement. On every regular task fiber, the determinant proxy, its representation in any task chart, and every metric-completed manipulability differ only by positive constants. They consequently induce the same complete ordering, constrained extrema, gradient directions, critical points, and local optimality classifications. For comparisons and trajectory optimization across task fibers, this work introduces fiber-normalized manipulability: the capability attained at an internal state divided by the best capability available on the same fiber. The resulting dimensionless scalar is invariant under coordinate changes on the internal-state and task manifolds and independent of the task-space metric. Its associated loss provides an intrinsic objective for physically admissible cross-fiber trajectories, including problems with prescribed or free task evolution and temporal coupling. Planar-manipulator and redundant aerodynamic-allocation examples demonstrate fixed-fiber equivalence, task-dependent cross-fiber differences, and invariant fiber-normalized trajectory optimization.

Closest papers

Nearest neighbours by meaning across the whole index.

CAMP: Cooperative Arm-Hand Motion Planning in Constrained Spaces

cs.RO ·2026-09-24 ·Ziyuan Wang, Yunlong Shan, Fei Mo, Sichao Liu, David Navarro-Alarcon +4 more
hot direction similarity 0.57
Abstract

Coordinated arm-hand motion planning is fundamental to dexterous robotic manipulation in complex and constrained environments. A straightforward solution is to decompose the problem into separate arm path planning and hand motion generation; however, this poses a dilemma: decomposition can miss feasible solutions that require coordinated arm-hand adaptation along the path. Alternatively, directly planning in the high-dimensional joint arm-hand configuration space captures such coupling but faces a substantially enlarged search space and nonconvex collision constraints. To characterize this coupling, we formulate feasible hand fibers that capture collision-free hand configurations for each arm configuration. Based on this formulation, we propose CAMP, a high-success and efficient cooperative arm-hand motion planner for constrained environments. CAMP constructs candidate trajectories through layered hand search with local arm relaxation, then compactly represents them using endpoint-preserving via-point movement primitives (VMPs) for coarse-to-fine joint optimization. Across six constrained simulation tasks, CAMP achieves 84.2-98.5% planning success, outperforming alternative planners with competitive efficiency. Ablation studies verify the contributions of arm relaxation, VMP representation, and coarse-to-fine optimization, while real-robot experiments demonstrate CAMP on constrained manipulation tasks. The project website is available at https://camp-armhand.github.io/.

0.34

FORTE: Task-Adaptive Force Capability Optimization for Mobile Manipulators

cs.RO ·2026-09-18 ·Xiao Wang, Heng Zhang, Gokhan Solak, Fei Zhao, Arash Ajoudani
code/data similarity 0.57
Abstract

Effective physical interaction control in robotic manipulation requires not only kinematically feasible motion but also sufficient force-interaction capability. Existing redundancy resolution methods often ignore task-specific force demands or maximize the force capability indiscriminately, sacrificing dexterity when large force margins are unnecessary. We propose a task-oriented force capability optimization framework for redundant mobile manipulators. A Vision-Language Model (VLM) infers object physical properties from an RGB image and a task description, generating a desired task-force sequence that captures gravitational and inertial demands. We then define a task-oriented force capability metric as the signed distance between a task-force uncertainty ball and the dynamic residual force polytope (RFP), quantifying compatibility between task demands and the robot's remaining actuation capacity. This metric is incorporated, alongside manipulability, joint-limit avoidance, trajectory smoothness, and base-oscillation suppression, into a whole-body multi-objective trajectory-optimization problem. Experiments on a mobile manipulator performing lifting and single-point-holding tasks under varying payload conditions demonstrate that the proposed method provides sufficient force capability for heavy loads while preserving high manipulability for light loads. This yields a task-adaptive balance that fixed capability-maximizing baselines (RFP inscribed radius, RFP cone) and manipulability-only optimization fail to achieve. The core implementation is publicly available at https://github.com/yeying256/FORTE.

0.42

Scale-Invariant Manipulability Shape Tracking Across Heterogeneous Manipulators

cs.RO ·2026-09-29 ·Geunwoo Kwon, Dong-gyu Lee, Kai Li, Soonwoong Hwang, Wansoo Kim
similarity 0.56
Abstract · 8 pages, 5 figures, 3 tables

When transferring manipulability across systems with different sizes and kinematic structures, matching absolute ellipsoid scale may be unnecessary when the goal is to reproduce orientation and semi-axis length ratios. Full-matrix tracking, however, penalizes both shape and absolute-scale differences, even when only shape matching is required. We therefore propose a scale-invariant manipulability shape-tracking method that treats matrices differing only by a positive scalar factor as equivalent and uses their unit-determinant representatives. We derive the differential of the unit-determinant shape representative and an orthonormal coordinate representation of the tangent tracking residual under the affine-invariant Riemannian metric (AIRM). The resulting scale-invariant objective is integrated with position and end-effector direction tasks in a constrained joint-velocity quadratic program. Simulations with four heterogeneous robots evaluate robot-to-robot and human-to-robot transfer. On three followers, the proposed method achieves endpoint shape distances of 9.30 x 10^-5 without scale tuning. With robot-specific target scales tuned during motion, the Full method retains endpoint axis-ratio errors of 0.19-0.31 on KR500 and UR20. For human reaching with concurrent tasks, the proposed method yields dual force shapes elongated along X like the human target on all four robots, with endpoint position errors of 2.4-5.6% of reference arm length versus up to 75% for the Full method tracking the original human ellipsoid.

0.28

Embodiment-Aware Planning for Heterogeneous Bimanual Manipulation

cs.RO ·2026-10-16 ·Sukhvansh Jain, Anurag Maurya, Shivam Vats, Narendra Kumar Dhar, Ravi Prakash
similarity 0.56
Abstract · Please find the project website here: https://sukhvansh2004.github.io/Bimanual-Manipulation/

Many manipulation tasks that are effortless for dexterous human hands remain challenging for robotic systems equipped with simple, task-specialized grippers. Industrial platforms commonly rely on end-effectors such as suction cups or parallel-jaw grippers, yet no single mode can reliably satisfy the diverse constraints encountered across different phases of complex manipulation tasks, including pickup, reorientation, insertion, and constrained placement. In this work, we investigate whether complementary simple grippers within a heterogeneous bimanual setup can collectively realize tasks that exceed the capability of any individual gripper alone. Given a single human demonstration specifying the desired object motion, we formulate embodiment-aware execution as a finite-horizon optimization over arm-trajectory assignments. At each segment, the planner determines whether single-arm manipulation or a coordinated dual arm handover is required, jointly reasoning over heterogeneous grasp feasibility, motion constraints, manipulability, and cross-gripper compatibility. Exploiting this formulation, we compute globally consistent assignments with explicit switching regularization. Experiments on a dual Franka FR3 platform equipped with suction and parallel-jaw grippers demonstrate improved feasibility and reliability in tasks that are infeasible under single-gripper execution.

0.29

Readiness Barrier Functions: Forward-Invariant Control Authority for Overactuated Multirotor Allocation

cs.RO eess.SYmath.OC ·2026-08-17 ·Giuseppe Silano
similarity 0.55
Abstract · This work has been submitted to the IEEE for possible publication

Allocation schemes that greedily maximize a readiness metric over the actuator fiber bundle of an overactuated multirotor produce commands that jump between disconnected optimal strata, demanding actuator rates no motor can deliver; effort-minimizing schemes are continuous but cannot guarantee that wrench-rate authority stays above any certified level. We reconcile the two by treating authority as a forward-invariant quantity: a control barrier function on the log-determinant of the drag-aware actuator-authority co-metric, enforced at torque level by a quadratic program in the allocation null space. A single design inequality renders the certified set compact and strictly interior to the actuator box, with the readiness cost of any rotor deactivation given in closed form as $\ln(n/(n{-}m))$ for symmetric designs. An explicit alignment ratio states when tracking can stay exact, otherwise the wrench error is bounded by $\mathcal{O}(ρ^{-1/2})$, and a robust variant handles motor-parameter uncertainty with a closed-form floor shift independent of the airframe matrix. On a hexarotor and a fully-actuated octorotor the closed-form gap matches simulation to machine precision. Over $300$ randomized missions, greedy maximization violates the certified floor in up to $51\%$ of authority-scarce missions, while the proposed filter never leaves the certified set and, in the hardest moment reversal, commits a $79\times$ smaller wrench error. The robust variant holds the floor on all $150$ perturbed plants. A high-fidelity simulation with measured propeller and motor data shows that the floor holds under unmodeled aerodynamics, electrical limits, and delay, and where it stops applying.

0.55

Joint-Angle Invariance of Jacobian-Based Performance Indices for Serial Robotic Manipulators

cs.RO ·2026-10-21 ·Yaohua Zhou, Mingdao Lin, Jiayu Song, Xixin Zhao, Haidong Huang +2 more
published similarity 0.55
Abstract · 9 pages, 6 figures, 4 tables. Accepted at the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

This article investigates the joint-angle invariance (JAI) of Jacobian-based performance indices for serial robotic manipulators. We identify kinematic conditions under which representative performance indices, including manipulability, stiffness, and other Jacobian-derived indices, remain independent of the first and last joint angles. This property allows a systematic reduction in the effective configuration-space dimensionality, thereby simplifying the performance evaluation. The utility of JAI is demonstrated through two application scenarios: workspace performance map construction and task layout optimization. Comparative results show that the proposed JAI-based strategy reduces computational effort and storage requirements without compromising the effectiveness.

0.37

Feasibility Distance Fields for Heterogeneous Constraints in Robot Configuration Space

cs.RO ·2026-09-21 ·Xijing Cui, Huayan Pu, Jun Luo, Gang Wang
similarity 0.55
Abstract · Configuration space, distance fields, Eikonal equation, feasibility, self-collision, singularity, Cartesian compliance, multi-robot systems,…

Robot manipulators are monitored by constraint-specific indicators whose units and gradient scales are not comparable, so they do not provide a common measure of the configuration-space motion remaining before violation. We define the feasibility distance field (FDF) as the distance, under a fixed positive-definite joint-space metric, to the union of infeasible configuration sets. Classical distance-to-set theory gives 1-Lipschitz continuity, almost-everywhere differentiability, and unit dual-gradient norm wherever the nearest projection is unique. The robotics contribution is an admissibility analysis showing when practical constraints define non-empty closed sets. We derive admissible formulations for external and self-collision, joint limits, dexterity, Cartesian and task-projected compliance, joint torque under payload, and dynamic manipulability. Since every field uses the same metric, heterogeneous constraints compose by a pointwise minimum, conditioned constraints retain a fixed distance space, and multi-robot constraints produce block-sparse gradients that identify which robots must react. We generate projection-based labels and train neural approximations with a distance loss and an Eikonal penalty. Simulations on a UR5e and a dual-arm cell evaluate seven fields using value, projection, sign, gradient, composition, and moving-obstacle diagnostics. Across 8,000 configurations, the largest feasible-side secant ratio is 0.920, mean learned gradient norms range from 0.994 to 0.998, and projection residuals range from 0.011 to 0.034 rad. Across 24 random obstacle paths, the external and composed collision fields achieve 90.4% and 91.6% success within 3 cm, with sign-error rates below 2%. The results support a common configuration-space margin and identify approximation errors near medial axes and sparsely sampled boundaries.

0.17

Aerodynamic Promptness of Tilting-Propeller Multirotors

eess.SY cs.RO ·2026-10-12 ·Antonio Franchi
similarity 0.55
Abstract

This work develops a geometric theory of aerodynamic promptness for multirotor platforms whose propeller directions depend on a smooth orientation-mechanism configuration. The actuator state consists of the actual signed propeller speeds and the mechanism configuration, and the nonlinear actuator map retains both the signed-quadratic propeller law and the configuration-dependent thrust directions. Constant direction maps represent fixed propellers, while shared dependence on mechanism coordinates represents mechanically coupled tilts. A Riemannian metric on the product actuator manifold compares propeller accelerations and orientation-mechanism rates through physically interpretable scales. Composing the actuator-map differential, the musical isomorphism induced by this metric, and the dual differential defines a task-rate authority map from wrench covectors to wrench-rate vectors. In fixed task coordinates, the square root of the determinant of its matrix defines aerodynamic promptness. Positive promptness is equivalent to local wrench-rate surjectivity, while the associated spectrum resolves directional authority and conditioning. The same construction yields the metric horizontal inverse, the orthogonal projector onto wrench-fiber directions, and task-preserving internal motions that regulate promptness without changing the instantaneous wrench. The construction is related intrinsically to dynamic feedback linearization and specialized to the independently tilting, radially arranged Holocopter and Voliro architectures, clarifying how their established allocation and rank constructions fit within the same actuator-manifold geometry.

0.22