CS Paper Radar

Joint-Angle Invariance of Jacobian-Based Performance Indices for Serial Robotic Manipulators

Yaohua Zhou, Mingdao Lin, Jiayu Song, Xixin Zhao, Haidong Huang, Jiahu Qin, Xiaocong Li

cs.RO ·submitted 2026-10-21 11:04 UTC · v1
published

Abstract

This article investigates the joint-angle invariance (JAI) of Jacobian-based performance indices for serial robotic manipulators. We identify kinematic conditions under which representative performance indices, including manipulability, stiffness, and other Jacobian-derived indices, remain independent of the first and last joint angles. This property allows a systematic reduction in the effective configuration-space dimensionality, thereby simplifying the performance evaluation. The utility of JAI is demonstrated through two application scenarios: workspace performance map construction and task layout optimization. Comparative results show that the proposed JAI-based strategy reduces computational effort and storage requirements without compromising the effectiveness.

Comment
9 pages, 6 figures, 4 tables. Accepted at the 2026 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2026)

Closest papers

Nearest neighbours by meaning across the whole index.

RoboCompiler: Graph-Native Compilation of Closed-Chain Robots for Consistent Modeling, Control, and Simulation

cs.RO ·2026-09-28 ·Mehdi Heydari Shahna, Joongheon Kim, Jouni Mattila
code/datahighly cited similarity 0.62
Abstract · GitHub: https://github.com/Mehdi-Heydari-Shahna/RoboCompiler

Robots with kinematic loops, coupled actuators, and changing contacts require consistent models of configuration, motion, force, and dynamics. Yet these interfaces are often reconstructed separately for control and simulation, making closure and actuation consistency difficult to maintain. This paper presents RoboCompiler, a graph-native framework that compiles a canonical mechanism graph into a shared mechanical interface. From bodies, joints, frames, inertias, and actuator ports, it constructs closure paths and analytic residual Jacobians, then assembles feasible configurations through rank-checked continuation and correction. A tangent lift maps independent velocities to full robot and task motion, while paired actuator-port maps preserve virtual work. A constraint-curvature correction extends the reduction to accelerations and projected rigid-body dynamics, including floating-base and support modes. Cycle-local evaluation, generated Jacobians, and dependency-aware reuse enable localized updates when closure inputs change. We evaluate physical loops and task-induced constraints on a industrial excavator, Unitree Go2, Franka Panda, Kangaroo, and a six-UPS Stewart platform. High-precision constrained-dynamics and independent Pinocchio checks confirm mechanical consistency; MuJoCo and Isaac Sim/PhysX executions demonstrate task performance and model reuse under native contact. For Kangaroo, compilation reduces residual-and-Jacobian evaluation time by 96.7% and closed-loop rollout wall time by 66.8%, with dynamics and control held fixed.

0.53

Task-Oriented Co-Design and Optimization of Geared Actuators for Robotic Applications

cs.RO ·2026-09-19 ·Xuanyu Huang, Jianqiang Dong, Hang Zhao
hot direction similarity 0.59
Abstract

Different tasks performed by legged robots impose distinct torque and speed requirements on actuators. Existing robotic actuators are generally optimized at the component level for metrics such as torque or power density, without explicit task guidance. System-level optimization across components such as motors, gearboxes, and sensors is challenging because of the high computational cost and coupling among mechanical, electrical, and electromagnetic behaviors. Consequently, improvements in individual components may not translate into better robot performance in a specific task. To this end, we present a systematic optimization framework for task-oriented co-design of actuator hardware and control. First, surrogate models are employed to accelerate motor evaluation and support global exploration of the coupled design space. Then, a hierarchical mixed-variable optimization strategy is adopted, combining discrete enumeration with continuous search over dimensions and real-valued indices. These indices are rounded to select admissible values for the remaining discrete choices before each evaluation. Within this search, rated output torque density and task performance are jointly optimized, with Bezier-parameterized joint torque profiles determined for each hardware candidate. Finally, the effectiveness of the proposed framework is validated through actuator fabrication and experiments on a two-degree-of-freedom jumping leg. Based on its measured mass, the fabricated prototype achieves a nominal rated output torque density of 35.7 N m/kg, approximately 60% higher than that of a widely used commercial geared joint actuator, while being 18.6% lighter. Under matched bench conditions, it achieves 12.0% greater jump height at twice-rated torque. Together, these results demonstrate a systematic route from task requirements to actuator design and control.

0.36

Kinematic Reward, Measured Effort: Hardware-Validated RL Morphology Optimization of a Planar 2R Manipulator

cs.RO ·2026-10-11 ·Gunesh Gupta, Arvind Kumar Mishra, Sohom Chakrabarty
similarity 0.57
Abstract · 6 pages, 10 figures. Video: https://youtu.be/XzHh0STetLM

Yoshikawa's Manipulability Index is generally used as a classical measure to define an optimal morphology of a manipulator. However, any such optimization is almost always studied as a purely kinematic quantity in simulation and is rarely validated on hardware. We present a reinforcement-learning framework with RSL-RL PPO that optimizes the morphology of a 2R SCARA-type manipulator arm with Yoshikawa's kinematic manipulability index as a core reward, and the analytically derived closed-form optimum for the circular task is used to verify that our method recovers it. Then the same method is applied to custom elliptical and rectangular paths having no analytical optimum. The RL-optimized morphologies are then transferred to a 2R hardware manipulator to validate its effect in reduction of joint load in the hardware. Compared to the worst morphology, the optimum morphology delivered by our method reduces second joint load by 38.4 +/- 0.6% for the ellipse path and 41.3 +/- 0.3% for the rectangle, and first joint load by 15%.

0.45

A Unified Dynamic Force Guidance Framework for Performance-Optimized Kinesthetic Teaching

cs.RO ·2026-09-18 ·Chunxin Li, Jianhua Wu, Zhenhua Xiong, Xiangyang Zhu
similarity 0.56
Abstract

Collaborative robots are increasingly deployed in industrial scenarios characterized by frequent product changeovers. As an intuitive programming method, kinesthetic teaching facilitates rapid robot deployment. However, users may overlook the configuration of the robot during kinesthetic teaching, leading to degradation in operational performance. Operational performance refers to the capability of the robot to generate motion and can be quantified by the Minimum Singular Value of the Jacobian matrix. To address this issue, this paper proposes an online dynamic force guidance method that integrates performance constraint and optimization mechanisms. Specifically, variable admittance control maintains the operational performance of the robot above a predefined threshold, while a virtual force actively guides the user to drag the robot towards configurations with improved performance. Experiments are conducted on a 6-DOF collaborative robot, comparing three typical paths in the task space. To evaluate the quality of the taught trajectories, trajectory playback experiments are conducted to analyze the relationship between the operational performance of the robot and the work efficiency. The results demonstrate that the proposed method effectively enhances the operational performance of the robot and consequently improves the work efficiency, holding significant value for reducing production takt time in industrial deployment.

0.33

Fiber-Normalized Manipulability and Determinant Proxies: Intrinsic Redundancy Optimization Across and Within Task Fibers

cs.RO ·2026-09-25 ·Antonio Franchi, Mirko Mizzoni
similarity 0.55
Abstract

This work establishes that determinant-based manipulability is an exact objective for fixed-task redundancy optimization, despite its dependence on task coordinates and the choice of task-space metric used for volume measurement. On every regular task fiber, the determinant proxy, its representation in any task chart, and every metric-completed manipulability differ only by positive constants. They consequently induce the same complete ordering, constrained extrema, gradient directions, critical points, and local optimality classifications. For comparisons and trajectory optimization across task fibers, this work introduces fiber-normalized manipulability: the capability attained at an internal state divided by the best capability available on the same fiber. The resulting dimensionless scalar is invariant under coordinate changes on the internal-state and task manifolds and independent of the task-space metric. Its associated loss provides an intrinsic objective for physically admissible cross-fiber trajectories, including problems with prescribed or free task evolution and temporal coupling. Planar-manipulator and redundant aerodynamic-allocation examples demonstrate fixed-fiber equivalence, task-dependent cross-fiber differences, and invariant fiber-normalized trajectory optimization.

0.34

Compressed Orientation Reachability Maps for Sub-Second Robotic Needle Entry Point Planning

cs.RO cs.CGeess.SY ·2026-10-29 ·Prabhu Nithin Gollapudi, Andreas Maier, Franziska Mathis-Ullrich, Water Zhao, Jia Wang +1 more
similarity 0.54
Abstract · 6 pages, 4 figures, 2 tables

In the context of multi-stage trajectory planning for robotic percutaneous liver interventions, identifying a kinematically feasible entry point remains a critical computational bottleneck. Existing methods rely on exhaustive inverse kinematics or randomized searches, incurring delays of 13 to 27 seconds per target and limiting real-time intraoperative adaptation. This paper introduces an Orientation-Based Reachability Map (ORM) that precomputes the kinematic feasibility of a 6 Degrees of Freedom (DoF) serial manipulator across 188,873 workspace positions and encodes orientation feasibility into a compact, indexed 83 MB map. A Just-In-Time (JIT) compiled runtime pipeline replaces live optimization with near-instantaneous array lookups. Experimental evaluation demonstrates a reduction in planning latency from 13.5-26.9 s to 0.289-0.349 s per target while maintaining high geometric fidelity, achieving a mean convex hull volume overlap ratio of 0.933 and a mean alpha-shape volume ratio of 0.976 relative to the baseline reachable point cloud. The proposed ORM framework enables sub-second entry point planning and provides an efficient computational framework for robotic needle insertion in percutaneous liver ablation.

0.37

H-PAC Hand: Control-Oriented Modeling and Tendon-Elasticity Compensation for an Underactuated Robotic Hand

cs.RO ·2026-08-17 ·Teng Yan, Jiongxu Chen, Teng Wang, Yue Yu, Qixiang Hua +3 more
similarity 0.54
Abstract · 7 pages, 6 figures. Extended preprint

Underactuated tendon-driven hands offer compact actuation and passive compliance, but tendon elongation under restoring-spring loading introduces configuration-dependent joint deviations. This paper presents H-PAC, a modular 6-actuator, 15-DoF robotic hand with a control-oriented modeling and implementation framework. A sparse analytical actuator-joint model is derived from the tendon-routing geometry, and a mechanics-based compensation model is developed to account for tendon-elasticity-induced joint errors. The proposed method is implemented in a hierarchical architecture: a host computer performs workspace-constrained posture mapping and compensation, while an ESP32 generates synchronized commands for six position-controlled servos. The same control parameters and execution strategy are used across all tasks without task-specific retuning. Monotonic servo-sweep experiments show that the compensation substantially improves joint-angle prediction. The MAE of the index DIP joint decreases from 1.15 degrees to 0.18 degrees, and all nine evaluated joints achieve an MAE below 0.23 degrees. Representative postures and grasping configurations are further executed using the same control pipeline without external joint or force sensing in the control loop. The results demonstrate a practical approach to improving posture reproducibility in compact underactuated robotic end-effectors.

0.34

LABIT: Long-Horizon Robotic Assembly Benchmark for Industrial Tasks

cs.RO ·2026-10-12 ·Constantin Schempp, Christian Friedrich, Luca Kofler, Laura Suhm
benchmarkcode/data similarity 0.52
Abstract · This work has been submitted to an Elsevier journal for possible publication. Copyright may be transferred without notice, after which this …

Robot learning has undergone significant advancements in the domain of compliant control and robotic assembly. The development of novel methodologies has transcended the capacity to address discrete tasks, such as grasping or inserting, and has evolved to encompass the comprehensive construction of entire assemblies. Conventional benchmarks, which are predominantly focused on single tasks, are no longer adequate to address the complexity and interconnected nature of modern manufacturing processes. Consequently, the necessity for benchmarks to encompass a broader spectrum of assembly and subassembly steps is becoming apparent. In light of these developments, we propose LABIT, an industrial robotic assembly benchmark for long-horizon manipulation. This benchmark encompasses DIN-norm assembly tasks, including screwing, placing, inserting, and snapping, under both high and low tolerance conditions. The successive nature of these assembly steps implies that prior errors can influence subsequent manipulation. Consequently, this benchmark is particularly relevant for assessing the robustness of intelligent robotic systems. The proposed benchmarking protocols and novel performance metric, based on a taxonomy of assembly complexity in conjunction with the comprehensive list of parts and their corresponding CAD models, serve as essential tools for research and development in the field. To provide a baseline, we evaluate the benchmark using traditional force-position control and report reliability and score metrics per primitive, subtask, assembly category, and subassembly. Accompanying data is available at https://irp-hka.github.io/robotic-assembly-benchmark/.

0.48