CS Paper Radar

Aerodynamic Promptness of Tilting-Propeller Multirotors

Antonio Franchi

eess.SY cs.RO ·submitted 2026-10-12 10:20 UTC · v1

Abstract

This work develops a geometric theory of aerodynamic promptness for multirotor platforms whose propeller directions depend on a smooth orientation-mechanism configuration. The actuator state consists of the actual signed propeller speeds and the mechanism configuration, and the nonlinear actuator map retains both the signed-quadratic propeller law and the configuration-dependent thrust directions. Constant direction maps represent fixed propellers, while shared dependence on mechanism coordinates represents mechanically coupled tilts. A Riemannian metric on the product actuator manifold compares propeller accelerations and orientation-mechanism rates through physically interpretable scales. Composing the actuator-map differential, the musical isomorphism induced by this metric, and the dual differential defines a task-rate authority map from wrench covectors to wrench-rate vectors. In fixed task coordinates, the square root of the determinant of its matrix defines aerodynamic promptness. Positive promptness is equivalent to local wrench-rate surjectivity, while the associated spectrum resolves directional authority and conditioning. The same construction yields the metric horizontal inverse, the orthogonal projector onto wrench-fiber directions, and task-preserving internal motions that regulate promptness without changing the instantaneous wrench. The construction is related intrinsically to dynamic feedback linearization and specialized to the independently tilting, radially arranged Holocopter and Voliro architectures, clarifying how their established allocation and rank constructions fit within the same actuator-manifold geometry.

Closest papers

Nearest neighbours by meaning across the whole index.

Differential Realizability of Static Control Allocation in Multirotors: An Impossibility under Nonredundant Full Actuation and a Pseudoinverse Obstruction under Redundant Actuation

cs.RO eess.SYmath.DGmath.OC ·2026-09-11 ·Antonio Franchi, Mirko Mizzoni
similarity 0.58
Abstract

Control allocation for multirotors with bidirectional propellers is commonly formulated in signed-thrust variables, where the wrench map is linear. The signed-quadratic map from physical rotor speed to thrust, however, is not a local diffeomorphism at zero speed. This work derives two distinct consequences. Under nonredundant full actuation, a single-propeller reversal removes one instantaneous task direction; hence, no global continuously differentiable exact static allocator exists over the complete task space. Under redundant actuation, the physical task map may remain regular, yet a transverse pseudoinverse zero crossing requires an unbounded rotor-speed derivative. We define differential realizability as regularity of the physical lift of an actuator-output section, derive exact and first-order validity conditions, and distinguish structural rank loss from an allocator- induced rate singularity. A local nullspace deformation repairs isolated pseudoinverse reversals, while a global fixed-orthant construction establishes existence of regular sections at the cost of persistent task-preserving internal actuation.

0.21

Fiber-Normalized Manipulability and Determinant Proxies: Intrinsic Redundancy Optimization Across and Within Task Fibers

cs.RO ·2026-09-25 ·Antonio Franchi, Mirko Mizzoni
similarity 0.55
Abstract

This work establishes that determinant-based manipulability is an exact objective for fixed-task redundancy optimization, despite its dependence on task coordinates and the choice of task-space metric used for volume measurement. On every regular task fiber, the determinant proxy, its representation in any task chart, and every metric-completed manipulability differ only by positive constants. They consequently induce the same complete ordering, constrained extrema, gradient directions, critical points, and local optimality classifications. For comparisons and trajectory optimization across task fibers, this work introduces fiber-normalized manipulability: the capability attained at an internal state divided by the best capability available on the same fiber. The resulting dimensionless scalar is invariant under coordinate changes on the internal-state and task manifolds and independent of the task-space metric. Its associated loss provides an intrinsic objective for physically admissible cross-fiber trajectories, including problems with prescribed or free task evolution and temporal coupling. Planar-manipulator and redundant aerodynamic-allocation examples demonstrate fixed-fiber equivalence, task-dependent cross-fiber differences, and invariant fiber-normalized trajectory optimization.

0.34

Effector-Centric NMPC of Tiltable-Multirotors for Offset-Free Omnidirectional Aerial Manipulation

cs.RO ·2026-08-18 ·Jinjie Li, Yicheng Chen, Johannes Kübel, Haokun Liu, Junichiro Sugihara +1 more
top venue similarity 0.54
Abstract · 22 pages, 26 figures. Accepted to IEEE Transactions on Robotics (T-RO). This arXiv version includes a two-page appendix with additional impl…

Aerial manipulation extends robotic operations to previously inaccessible aerial environments. Unlike arm-equipped aerial systems, tiltable-multirotors can directly generate six-degree-of-freedom wrenches through their flight bases, enabling both efficient movement and omnidirectional operation by tilting the thrust direction. This work presents a design analysis and a wrench-based control framework for tiltable-multirotors in aerial manipulation. We show that a four-rotor tiltable configuration provides a balance between interference-free propeller sizing and hovering efficiency across different attitudes, and its null-space redundancy is crucial for traversing singular configurations under physical constraints. We further show that an upward end-effector placement yields a favorable trade-off between geometric clearance and available wrench. To address disturbances, we propose a dual strategy consisting of a modified integral term for model error and an acceleration-based estimator for external wrenches. Building on these insights, we develop an effector-centric nonlinear model predictive control (NMPC) framework that integrates design choices, singularity handling, and disturbance compensation into a unified formulation. The proposed framework runs fully onboard at 100 Hz on a custom-built tiltable-quadrotor. Real-world experiments, including a 90-deg step cartwheel rotation, whiteboard pushing, and continuous 360-deg valve turning, demonstrate the feasibility of wrench-based omnidirectional manipulation with singularity traversal on a one-DoF-per-arm tiltable-quadrotor.

0.51

Readiness Barrier Functions: Forward-Invariant Control Authority for Overactuated Multirotor Allocation

cs.RO eess.SYmath.OC ·2026-08-17 ·Giuseppe Silano
similarity 0.54
Abstract · This work has been submitted to the IEEE for possible publication

Allocation schemes that greedily maximize a readiness metric over the actuator fiber bundle of an overactuated multirotor produce commands that jump between disconnected optimal strata, demanding actuator rates no motor can deliver; effort-minimizing schemes are continuous but cannot guarantee that wrench-rate authority stays above any certified level. We reconcile the two by treating authority as a forward-invariant quantity: a control barrier function on the log-determinant of the drag-aware actuator-authority co-metric, enforced at torque level by a quadratic program in the allocation null space. A single design inequality renders the certified set compact and strictly interior to the actuator box, with the readiness cost of any rotor deactivation given in closed form as $\ln(n/(n{-}m))$ for symmetric designs. An explicit alignment ratio states when tracking can stay exact, otherwise the wrench error is bounded by $\mathcal{O}(ρ^{-1/2})$, and a robust variant handles motor-parameter uncertainty with a closed-form floor shift independent of the airframe matrix. On a hexarotor and a fully-actuated octorotor the closed-form gap matches simulation to machine precision. Over $300$ randomized missions, greedy maximization violates the certified floor in up to $51\%$ of authority-scarce missions, while the proposed filter never leaves the certified set and, in the hardest moment reversal, commits a $79\times$ smaller wrench error. The robust variant holds the floor on all $150$ perturbed plants. A high-fidelity simulation with measured propeller and motor data shows that the floor holds under unmodeled aerodynamics, electrical limits, and delay, and where it stops applying.

0.55

Tilt as a Certified Resource: Preserving Motor Wrench-Rate Authority on Articulated Multirotors

cs.RO eess.SYmath.OC ·2026-09-18 ·Giuseppe Silano, Martin Saska
similarity 0.50
Abstract · This work has been submitted to the IEEE for possible publication

Fully-actuated multirotor aerial vehicles must not only track nominal wrenches but retain the "readiness" to modulate them rapidly under disturbances. Classical effort-minimizing allocators ignore this dynamic limit, whereas maximizing readiness leads to topologically disconnected optimal sheets demanding physically impossible actuator rates. Enforcing a readiness safety floor on fixed-geometry symmetric platforms further encounters a zero-sum degeneracy: motor-speed redistribution cannot improve authority without conceding wrench tracking. This paper uses active morphology to break the degeneracy, treating servo tilt as a geometric resource supplying authority-recovery directions unavailable to static rotors. We construct a configuration-dependent, motor-only readiness certificate - the log-volume of the reachable wrench-rate set - that explicitly excludes servo capacity, preventing a "ghost capacity fallacy" in which the certificate would falsely credit slow mechanical kinematic limits instead of collapsing accurately at motor saturation. The certificate is enforced as a Control Barrier Function (CBF) within a Unified Physical-Command Quadratic Program acting on motor torques and servo setpoints. Closed-loop simulations of an articulated octorotor under severe gust disturbances show classical allocators diverging and uncertified articulated allocators violating the safety floor, while the proposed CBF filter bounds the system state and preserves vehicle authority.

0.34

An Experimental Study of Downwash Effects on a Continuum Manipulator Integrated with a Multirotor UAV

cs.RO ·2026-08-19 ·Anuraj Uthayasooriyan, Krishna Manaswi Digumarti, ernando Vanegas, Felipe Gonzalez
top venue similarity 0.49
Abstract · Accepted to publish in Robotics and Automation Letters

Continuum arm aerial manipulation systems leverage soft-manipulator compliance and dexterity for tasks in confined or hazardous environments, but propeller downwash can degrade performance, particularly near walls and the ground. This effect remains uncharacterized for continuum manipulators. This letter experimentally studies downwash-induced kinematic deviations of a tendon-driven continuum manipulator integrated with a multirotor platform. Under still-air conditions, the CM is compared with a constant-curvature (CC) model. Downwash- induced end-effector pose deviations are then quantified relative to the mean still-air experimental baseline at four propeller throttle levels in free space, and at maximum throttle near a wall, and near the ground. Vertical position and yaw show the largest deviations and are amplified by ground effect. A CC-guided Gaussian process regression (GPR) residual model is learned from experimental data that improves forward pose prediction RMSE (position by 89-95%, orientation by 47-79%), and support compensation-oriented, downwash-aware modeling of continuum arm aerial manipulation systems.

0.70

Arbitrary-Order Hermite Interpolation of Rigid-Motion Jets via Hyper-Multidual Quaternions

cs.RO ·2026-08-27 ·Daniel Condurache
similarity 0.49
Abstract · 21 pages, 1 figure

We study bilateral interpolation of finite-order rigid-motion jets represented by unit dual quaternions. An order-$n$ multidual (MD) algebra is the truncated polynomial algebra $\mathbb{R}[\varepsilon]/(\varepsilon^{n+1})$; hyper-multidual (HMD) quaternions are dual quaternions with coefficients in this algebra. Temporal HMD transforms encode a pose and its derivatives, whereas a generic HMD curve need not be the temporal jet of its pose projection; we call this requirement holonomicity. We show that a temporal transform and its relative descriptor are unitary and derive recursive coefficient constraints, together with a local realizability converse in an admissible logarithm chart. We then extend screw linear interpolation (ScLERP) algebraically to unit HMD quaternions. Although it matches complete endpoint transforms, direct HMD--ScLERP is generically non-holonomic for arbitrary endpoint jets. We give a coefficient criterion and explicit endpoint and first-order interior contact defects. A holonomic alternative is obtained by mapping endpoint transforms to logarithmic dual-quaternion coordinates, applying the degree-$(2n+1)$ Hermite polynomial that matches derivatives through order $n$, and lifting by the exponential. HMD arithmetic also recovers higher-order rigid-motion acceleration fields without explicit differentiation of $\mathrm{dexp}$. Rotation and full $\mathrm{SE}(3)$ tests through second order, with an additional third-order polynomial check, reproduce the stated defects and endpoint jets.

0.37

CANTABILE: Learning Expressive Dynamics for Robotic Piano Performance

cs.RO ·2026-09-16 ·Woosik Kim, Wonhyeok Choi, Sunghoon Im
benchmark similarity 0.49
Abstract · 9 pages, 10 figures, 4 tables. Under review

Robotic piano playing has emerged as a standard benchmark for dexterous bimanual manipulation, yet progress on it has been measured almost entirely by note accuracy -- which keys are pressed (pitch) and when (onset) -- leaving the musical dynamics essential for expressive performance neither rewarded nor evaluated. We propose CANTABILE, a dynamics-aware framework for robotic piano performance that (i) closes the score-to-contact loop by conditioning the policy on upcoming velocity goals and mapping each key's angular velocity at onset back to MIDI velocity, (ii) couples a velocity-fidelity reward with an onset-coverage reward, so that dynamics cannot be improved by omitting difficult notes, and (iii) refines a frozen dynamics-aware base policy with an alpha-scaled, finger-only residual that localizes strike-intensity adaptation away from nominal note execution. On EXPRESSIVE-51, a dynamics-rich 51-song subset of RoboPianist, CANTABILE raises Velocity F1 -- jointly measuring pitch, onset, and intensity within a +/-8 MIDI-velocity tolerance -- from 0.06 to 0.34 over the RoboPianist baseline, improves all 51 songs, more than halves matched-note velocity error, and reduces log-mel distance to reference audio by 8%. Intensity-randomized training further enables runtime control of performance intensity without retraining.

0.44