CS Paper Radar

Scalable and Data-Driven Decision Support in the Maintenance, Repair, and Overhaul Process

Houkun Zhu, Helena Ebel, Dominik Scheinert, Florian Schmidt, Jens Altenkirch, Odej Kao

cs.AI cs.LG ·submitted 2026-09-27 15:03 UTC · v1
published

Abstract

Several businesses apply maintenance, repair, and overhaul (MRO) principles to the life-cycle of their existing products. In cases like casted gas turbine component Product Lifecycle Management (PLM), repairing components in frequent intervals can extend the lifetime expectation of the product, provide higher cost efficiency compared to newly produced components, and even improve the part design during the repair cycle. Another aspect of repair concerns sustainability, as products often contain rare materials. The emissions produced by the repair process are usually smaller than mining materials and casting new components. To optimize the repair process further, we propose the Smart Expert System (SES), which assists engineering experts with machine learning-based decision support throughout the repair process. We elaborate on its IT architecture and present machine learning models employed for representative MRO use cases. The SES is evaluated using actual industry data from a leading gas turbine company and demonstrably fulfills formulated requirements concerning the suitability of the overall decision support and the stability of the enclosing IT architecture.

Comment
Published in: 2022 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM)
DOI
10.1109/IEEM55944.2022.9989791

Closest papers

Nearest neighbours by meaning across the whole index.

A Hybrid Rule-Based and AI-Augmented Framework for Automatic Failure Recovery in DevOps Deployments

cs.SE cs.DC ·2026-09-21 ·Raju Chowdhury, Aniruddha Singh Gautam, Apurv Ghai
similarity 0.62
Abstract · This is the preprint version of a paper accepted at the ETNCC 2026 Conference. The final published version will appear in IEEE Xplore. This …

Automatic failure recovery is another difficult area of DevOps deployments due to the complexity of the system, high workload and the limitations of the traditional rules-based or manual approach. This study proposes a hybrid model integrating deterministic, rule-based recovery with the assistance of machine learning by fault prediction to automatically monitor failures, identify, classify and recover failures in real time. To test the architecture, a distributed log dataset of 100,000 records was used for models such as Decision Tree, Random Forest, Logistic Regression, LightGBM, Autoencoder with BiLSTM. The Decision Tree had a strong performance in defect identification with an F1 score of 80.8%, recall of 80.0%, precision of 81.6%, and accuracy of 89.4%. An impressive 83.3% success rate was achieved by the automated recovery measures, resulting in a 94.6% decrease in mean time to recovery (MTTR), a 95.4% reduction in downtime, and annual savings of 7,462. The combination of explainable rule-based logic and adaptive AI prediction in the framework means it is more resilient, operationally efficient, and scalable, and an effective, autonomous approach to DevOps environments evaluated under controlled experimental conditions.

0.35

An LLM-Agentic Framework for Intelligent Work Order Management in Industrial Maintenance

cs.AI ·2026-11-18 ·Nianjun Zhou, Dhaval Patel
similarity 0.58
Abstract

This paper presents an AI-driven framework, CodeReAct agent, designed to enhance industrial equipment maintenance through natural language (NL) interactions. The framework employs an advanced AI agentic approach to interpret human instructions, providing knowledge extraction, asset status summarization, and work order recommendations. It identifies patterns and trends and predicts work orders by standardizing industrial data into business objects (BOs) and utilizing analytical function API calls. The AI agent operates through a Thought-Action-Observation process similar to human problem-solving, automating complex analytical tasks typically performed by data scientists. Notably, the Action phase generates executable code, replacing manual coding efforts. A case study focusing on chiller maintenance demonstrates the framework's capability to analyze multiple years of work orders, and alerts and anomalies are presented. The results indicate that the AI agent framework effectively processes human utterances to analyze data, extract valuable insights, and support informed decision-making, reducing the need for data scientist involvement. By recontextualizing NLP agent frameworks in industrial engineering, the approach enables autonomous function generation and task execution across a range of domain-specific maintenance scenarios, with chillers used as a representative case study.

0.12

FuDU: A Fuzzy Dual-dimensional Uncertainty Framework for Streaming Active Learning in Industrial Defect Detection

cs.CV ·2026-09-02 ·Zhaoyang Wang, Haiyong Chen, Binyi Su, Xinwei Lyu
top venuecode/data similarity 0.57
Abstract · Accepted at ECCV 2026

Ensuring the reliability of deep learning models in real-time industrial defect detection is critical for high-stakes quality inspection. To mine uncertain samples within continuous industrial media streams, thereby enhancing the reliability of the detection system, this paper proposes a streaming active learning method based on the Fuzzy Dual-dimensional Uncertainty (FuDU) framework. Specifically, we first design a Prototype-based Global Uncertainty Quantification (PGUQ) module on the backbone to evaluate image-level uncertainty via normal/defective feature prototypes. A Dual-entropy defect Uncertainty Evaluator (DeUE) is then integrated into the detection head to quantify box-level uncertainty. Finally, by modeling uncertainty as systematic error, we propose a fuzzy dual-dimensional uncertainty-aware strategy that leverages fuzzy inference to fuse dual-dimensional uncertainties, enabling expert knowledge-driven adaptive sampling decisions. Comprehensive experiments demonstrate that FuDU is efficient and flexible, making it well-suited for challenging industrial inspection tasks such as the detection of nuclear fuel rod defects. Our code is publicly available at: https://github.com/wangzhaoyang-508/FuDU.

0.53

Explainable Predictive Condition-based Maintenance of Naval-Propulsion Systems using Fuzzy Logic

cs.LG ·2026-09-21 ·Dionisis Kalogeropoulos, Georgia Sovatzidi, Panagiotis G. Kalozoumis, Dimitris K. Iakovidis
published similarity 0.57
Abstract · Accepted at the 30th Pan-Hellenic Conference on Informatics (PCI 2026)

The shipping industry has a significant impact on the global economy, emphasizing the need for operational availability and safety through the use of effective maintenance techniques. During the last decades, predictive maintenance (PdM) has emerged as a promising solution compared to the existing conventional maintenance systems. This is because it offers several advantageous functions, such as damage predictions for vessel components, reduced downtime, improved and extended life of machinery, as well as higher safety during voyages. However, existing methodologies developed for performing PdM do not provide explanations of their results to users, so that they can understand the failures that may occur. To address this limitation, this paper proposes a novel framework based on a fuzzy decision tree and a deep residual neural network, aiming to perform explainable PdM on naval vessels. The proposed framework is able to generate fuzzy local rules based on the dataset used, and can provide explanations of its outcomes, using cause-and-effect relationships, in a way that are understandable to users, thereby gaining their trust. Experiments using a publicly available dataset demonstrate the effectiveness of the proposed framework, as it achieves an accuracy of 99.24%.

0.43

FedCMAPSS: A Benchmark for Federated Learning in Remaining Useful Life Estimation

cs.LG ·2026-08-26 ·Amelia Sorrenti, Matteo Pennisi, Concetto Spampinato, Simone Palazzo
publishedbenchmarkcode/data similarity 0.57
Abstract · Accepted at the 21st IEEE Conference on Industrial Electronics and Applications (ICIEA 2026)

Data-driven prognostics and health management has emerged as a key enabler for Industry 4.0, yet the development of robust remaining useful life (RUL) estimation models is often limited by the scarcity of run-to-failure data. While federated learning offers a promising paradigm to collaboratively train predictive models without sharing sensor data, research efforts have operated so far in the absence of a common evaluation framework. To address this gap, this paper introduces FedCMAPSS, a benchmark for federated RUL estimation based on the commonly-used NASA C-MAPSS dataset. We define a set of five standardized tasks designed to simulate real-world industrial challenges, ranging from ideal IID settings to extreme statistical heterogeneity, and conduct a systematic evaluation of state-of-the-art federated optimization algorithms across multiple neural architectures. By establishing reproducible baselines and making the source code and data splits publicly available, this work aims to provide a standard foundation for developing and comparing federated predictive maintenance solutions.

0.43

Automated Feature Engineering, AutoML, and Decision-Focused Learning for Improved Energy Consumption Forecasting

cs.AI ·2026-09-28 ·Nasser Alkhulaifi
similarity 0.56
Abstract · PhD thesis, School of Computer Science, University of Nottingha, United Kingdom

The rising cost and demand for energy, together with environmental sustainability goals, create major challenges for energy management. Energy Consumption Forecasting (ECF) supports planning by predicting future consumption, but Machine Learning (ML) models for ECF often depend on expert-driven Feature Engineering (FE). This thesis addresses that dependence through three contributions. First, it establishes and evaluates a comprehensive FE pipeline for ECF and investigates domain-specific features. Second, it introduces AutoEnergy, a domain-tailored automated FE algorithm that generates interpretable features from timestamps and lagged consumption and integrates with AutoML for end-to-end ECF modelling. Across eighteen real-world energy datasets spanning residential, commercial, industrial, renewable, and grid domains, AutoEnergy reduces forecasting error by 19.52%-84.72% relative to baseline AutoML and established automated FE methods, while running 1.31-4.41 times faster, with gains varying by dataset. Third, AutoEnergy is integrated with Decision-Focused Learning (DFL) for a Battery Energy Storage System problem, jointly forecasting electricity prices and demand while optimising charging and discharging decisions. On a real-world UK property dataset, this approach reduces operating costs by 22.9%-56.5% compared with the same DFL models without automated FE. Overall, the results show that domain-specific automated FE can reduce reliance on manual feature design, improve forecasting accuracy, and translate predictive gains into measurable operational benefits in energy management.

0.14

Can LLM Agents Efficiently Identify Appliance Faults? Insights From Diagnosing a Simulated Appliance

cs.CL ·2026-10-13 ·Lucas H. McCabe, Sarah Lukens, H. Howie Huang
benchmark similarity 0.54
Abstract

In so-called "Industry 4.0," integrated sensors, analytics tools, and other digital technologies supplement industrial workflows, potentiating enhanced visibility and automation. Prognostics and health management (PHM) and natural language processing (NLP) practitioners alike have explored the application of large language models (LLMs) to industrial asset management, but many prior works' focus on exam-like benchmarks has limited their assessment of LLMs' ability to automate practical operations. Herein, we introduce CoffeeBench, a fault diagnostics task for LLM agents, using a simulated appliance. The LLMs we evaluate struggle to consistently identify faults from the sensor information alone, but the best-performing ones can iteratively refine the fault-option space to eventually obtain a successful diagnosis. Our subsequent analyses, therefore, focus on: differentiating models by diagnostic efficiency (RQ1); examining the lagging performance of the three worst models (RQ2); and identifying viable heuristics for selective prediction (RQ3), including that initial diagnostic uncertainty and LLM-judged soundness of reasoning are high-signal predictors of diagnostic success. In addition to our benchmark results (Section 3.1), we provide practical insights for improving the performance of the open-weight models on CoffeeBench, such as by explicitly tracking episode state on their behalf to reduce timeouts (Section 3.2) or applying a deliberation loop to refine diagnostic hypotheses (Section 3.3).

0.24

Preliminary Exploration of Large Models Based on Self-Supervised Learning for Health Monitoring of Power Electronic Converters

eess.SY ·2026-10-13 ·Xinyuan Liao, Xiangtian Deng, Yang Liu, Zhaobing Cai, Haoran Wang +1 more
top venue similarity 0.53
Abstract · Accepted by Proceedings of the 2nd Electrical Artificial Intelligence Conference, EAIC 2025

Current artificial intelligence (AI) methods for power electronics converters make limited use of the abundant unlabeled data generated during real-world operation. This underexplored resource holds significant potential for advancing model performance. To address this gap, this paper presents PE-TSFM, a time-series foundation model tailored for power module health monitoring. The model adopts the PatchTST architecture combined with self-supervised learning and is trained on more than 143 million timestamps, where over 98\% of this training data is unlabeled and collected directly from an operating traction converter. In degradation classification tasks, PE-TSFM achieves an accuracy of 87\%, considerably surpassing five conventional time-series AI models whose performance ranges from 27\% to 45\%. These results demonstrate the model's strong few-shot learning capability and generalization across different operating conditions. This work promotes a shift from narrowly focused models in power electronics toward unified, scalable foundation models that can unlock value from large-scale unlabeled operational data.

0.31