CS Paper Radar

GA-EIRFS: A Geometry-Augmented Repeat-Factor Sampling Method for Long-Tailed LiDAR 3D Object Detection

Taufiq Ahmed, Constantino Álvarez Casado, Daniel Herrera Castro, Sasan Sharifipour, Abhishek Kumar, Miguel Bordallo López

cs.CV ·submitted 2026-09-29 17:50 UTC · v1
code/data

Abstract

Long-tailed 3D object detection is treated as a class-frequency problem, but LiDAR supervision quality depends on object observability: similar frequencies can hide different geometric evidence. We introduce Geometry-Augmented Exponentially Weighted Instance-Aware Repeat Factor Sampling (GA-EIRFS), a detector-agnostic method that modulates a frequency-based repeat factor with a fixed geometry score combining point count, surface-normal entropy, and surface coverage. GA-EIRFS changes only frame-sampling probabilities, leaving the detector and inference unchanged. On nuScenes it improves mean average precision (mAP) and the nuScenes detection score (NDS) in four converged experiments with CenterPoint and PointPillars over two seeds; for CenterPoint at seed 666, mAP rises from 0.552 to 0.563 and bicycle AP from 0.306 to 0.359. Per-class gains correlate with the class sampling-weight increase (Spearman rho=0.70, p=0.025) but not with geometry score alone (rho=0.32, p=0.37), so geometry amplifies frequency-driven need. KITTI results vary across seeds, most for the rarest class. Code: https://github.com/Multimodal-Sensing-Lab/GA-EIRFS.

Comment
5 pages, 4 figures, Submitted to IEEE ICASSP 2027

Closest papers

Nearest neighbours by meaning across the whole index.

How Sampling Strategy Affects Imbalance Mitigation in LiDAR Segmentation: A Study of Structured vs. Random Point-Based Architectures

cs.CV ·2026-08-17 ·Antonis Savva, Christos Kyrkou, Theocharis Theocharides
publishedbenchmark similarity 0.64
Abstract · 9 pages, 6 figures, IEEE International Conference on Image Processing (ICIP) 2026

Class imbalance in LiDAR point clouds poses challenges for semantic segmentation in autonomous navigation and urban mapping. While 2D vision has numerous mitigation techniques, their effectiveness in 3D remains unclear. We benchmark six reweighting schemes and five imbalance-aware losses across three datasets (DALES, S3DIS, STPLS3D) using two architectures (KPConv, RandLA-Net). Inverse-frequency weighting degrades performance by up to 12% compared to uniform weighting, with catastrophic failures in minority classes. Uniform weighting performs within 2% of complex losses for structured sampling (KPConv) but benefits less for random sampling (RandLA-Net, up to 4.6% gap). Loss landscape analysis reveals a complex interplay: for structured sampling, imbalance ratio determines landscape geometry on real LiDAR data but decouples from it on synthetic data; for random sampling, landscapes show high sensitivity to dataset geometry regardless of imbalance ratio. For the two evaluated point-based architectures, these results suggest that the interaction between sampling strategy (structured vs. random), imbalance severity, and data acquisition characteristics shapes which mitigation approaches are effective.

0.35

Provisioning Robust and Efficient LiDAR Perception for Autonomous Driving

cs.CV ·2026-10-20 ·Tingxu Han, Zijie Shen, An Guo, Lyuke Wang, Chunrong Fang +2 more
code/data similarity 0.63
Abstract

LiDAR-based 3D object detection is a core perception service for autonomous driving, but deployment requires robustness to point-cloud corruption while meeting latency and memory requirements. Existing approaches address robustness and resource efficiency separately, resulting in compact detectors that are fragile under corruption or robust detectors that remain costly to deploy. We therefore formulate LiDAR perception provisioning as constructing a detector that remains accurate under point-cloud corruptions while meeting constraints on inference latency and peak GPU memory. To achieve robustness, we first craft corrupted samples that mimic extreme weather conditions. Then we train candidate detectors offline by ordering clean and corrupted samples by perturbation sensitivity, through which detectors learn more from hard corrupted samples. We estimate perturbation sensitivity using an ensemble of seven heterogeneous 3D detectors by tracking changes in confidence, BEV overlap, and unmatched detections. To improve efficiency, we narrow the network and use offline neighborhood-density measurements to determine how many points and neighbors each sampling stage processes. We evaluate our method using AP (Average Precision) under clean and corrupted conditions, inference latency, and peak allocated GPU memory. On KITTI for Car detection with PointRCNN, our method improves Moderate AP under corruption by 3.32 points over the original detector while reducing mean latency by 19.8% and peak allocated GPU memory by 53.9%. Across two datasets, two detector architectures, and three object classes, our method improves AP under corruption by 4.03 points on average over the corresponding original detectors, while reducing mean inference latency and peak allocated GPU memory by 14.4% and 38.0%, respectively. Our code is available at https://github.com/drunklibai/robust-efficient-lidar-perception.

0.20

GeoPillars: A Large-Kernel Pillar Detector for Single-Sweep LiDAR Under Point Sparsity, and a Decomposition of Its Gain

cs.CV ·2026-11-19 ·Chaitanya Dumbre, Shubham Sarkar, Akash Mohapatra, Ghanasham Patil, Sheetal Girase
code/datahot direction similarity 0.63
Abstract · 16 pages, 13 figures, 8 tables

GeoPillars is a pillar-based 3D detector for single-sweep LiDAR under a hard budget of eight points per 0.4 m pillar, a budget that discards 46.6% of in-range points. It adds geometric pillar features, grouped vector attention within each pillar, a learned absolute positional prior on the bird's-eye-view (BEV) grid, a large-kernel backbone, auxiliary surface-normal supervision and a full-resolution detection head. Trained on 123k synthetic CARLA scans and evaluated on cars, it reaches 81.33 BEV AP@0.7, 13.76 points above CenterPoint at the same input budget and 1.91 points above CenterPoint at its native, denser budget. These are in-distribution figures, because the validation split is per-frame rather than scene-disjoint. A rung-by-rung decomposition shows that the new components explain little of the gain. Raising the detection-head resolution alone recovers 10.19 of the 13.76 points, the joint change of encoder, backbone, neck and positional prior adds 3.37, and the normal-supervision branch adds 0.20, which is within run-to-run variation. With heading reversals folded out, orientation error is similar for all seven models, although GeoPillars reverses headings about half as often as a resolution-matched baseline. It is also the slowest of the seven models. Evaluated zero-shot on 6,743 real nuScenes keyframes, no model transfers, and each retains 3.7% to 12.2% of its CARLA accuracy. A collection defect left LiDAR intensity constant, so every model learned from geometry alone. Code and checkpoints are publicly available.

0.48

SAVTrack: Selective Vote Aggregation for Reliability-Aware Point Cloud Tracking

cs.CV ·2026-09-15 ·Sifan Zhou, Linyue Tan, Qiwei Wang, Ziyu Zhao, Xiaobo Lu
hot direction similarity 0.61
Abstract · 12 pages, 5 figures

3D single object tracking (SOT) in LiDAR point clouds is essential for autonomous systems, but remains challenging under sparse and incomplete observations. In such cases, different target points provide highly uneven constraints on the object center, causing some point-to-center votes to be substantially less reliable than others. Existing point-based trackers typically aggregate these hypotheses without explicitly modeling their reliability, allowing inaccurate votes to contaminate proposal clustering and degrade localization accuracy. To address this issue, we propose \textbf{SAVTrack}, a motion-aware tracking framework with \textbf{Selective Vote Aggregation (SAV)}. SAVTrack estimates the reliability of each candidate vote from both local seed features and inter-frame motion context, and removes low-confidence hypotheses before proposal clustering. This pre-aggregation gating prevents unreliable hypotheses from affecting cluster formation while introducing only modest computational overhead. SAVTrack achieves competitive performance on KITTI and nuScenes, reaching 68.4/87.4 and 58.44/69.82 Success/Precision, respectively, while running at 82 FPS. It retains fewer than one-sixth of the candidate votes used by dense aggregation and remains particularly effective under sparse target observations.

0.37

Let LiDAR Decide Where to Look: Geometry-Measured Token Selection for Efficient Sparse Latent World Models

cs.CV ·2026-10-29 ·Zeping Zhang, Zhuoya Zhao, Robert Laganière
similarity 0.60
Abstract

Vision-centric autonomous driving models encode thousands of image tokens per frame, yet most depict sky, buildings, or empty road---content irrelevant to planning. Worse, these tokens dilute the planner's attention: we show that randomly discarding 75% of tokens already outperforms the dense model, because the planner can concentrate on the remaining driving-critical content. Building on this finding, we present Geometry-Aware Token Selection (GATS), which uses LiDAR and radar point projections to select a small fraction of image tokens before the vision backbone runs. Because the selector operates on measured 3D geometry rather than visual features, the backbone encodes only the selected patches, cutting end-to-end FLOPs by up to $18\times$. Each kept token receives a 3D anchor from its LiDAR point and is fed to a self-supervised latent world model that predicts future features and 3D displacements without box annotations. At 25% budget, GATS achieves a 3-sec L2 displacement error of 0.520 m on nuScenes and an EPDMS of 88.9 on NAVSIM---surpassing the dense baseline (0.573 m / 85.9) at $6.6\times$ fewer total FLOPs. At an extreme 10% budget (24 GFLOPs, $18\times$ reduction), it still beats the dense baseline on both nuScenes (0.537 m vs. 0.573 m L2) and NAVSIM (87.9 vs. 85.9 EPDMS). On 739 intent-critical scenarios, GATS covers 95.8% of hazardous vehicles and achieves a 0.09% collision rate---73.5% lower than the dense model (0.34%).

0.19

OrthoMark: Place Recognition with Point-Anchored Orthographic Height Mark

cs.RO cs.CV ·2026-11-16 ·Haichuan Li
similarity 0.60
Abstract

LiDAR place recognition provides the loop closures of Simultaneous Localization and Mapping(SLAM). Perspective from Z-axis, a gravity-aligned scan is an orthographic map of the scene, and a revisit from another position and heading moves this map rigidly in the plane, a motion that a polar Fourier spectrum ignores and phase correlation recovers. Along the vertical, the heights of the returns describe the structures, but which heights are observed depends on the range, because the sensor's vertical field of view cuts nearby structures low; height thus misleads a global key, yet is decisive once two scans are aligned and compared cell by cell where they overlap. We present \method, a training-free method built on one principle: two LiDAR scans can only be compared through features computed from the same geometric surfaces in both scans. \method retrieves candidates with a translation- and rotation-invariant polar spectrum of the bird's-eye view (BEV), 1.9,KB per keyframe, and verifies each candidate by estimating its planar pose through phase correlation and scoring it with \emph{point-anchored height columns}: every BEV cell keeps a 16-bit mask of the heights of its own returns; within a session, the score is weighted by the expected overlap of the two scans' sensing ranges, computed from their distance. We show that this vertical link pays off in verification but hurts in retrieval, where what a height slice contains depends on the range to the structure. For single robot, \method has the highest AP of the training-free methods without 3D registration on the KITTI development sequences; across robots, on all multi-robot sequences, it matches or exceeds RING++ at 1/350 of its descriptor size and closes more inter-robot loops than the learned BEVPlace++ on all tests.

0.28

Open-vocabulary 3D object detection with promptable segmentation

cs.CV ·2026-09-16 ·Ömer Faruk Deniz, Mustafa Taha Koçyiğit
similarity 0.60
Abstract · 18 pages, 6 figures, 12 tables

Three-dimensional object detection for autonomous driving is dominated by detectors trained on large corpora of human-annotated 3D boxes. Such a detector learns a fixed category list, and everything outside it is invisible. This paper asks whether the task can be solved training-free and open-vocabulary. A promptable segmentation model (SAM3), queried with class names as text prompts, supplies instance masks in the vehicle's six surround-view cameras, and the masks are turned into metric 3D boxes using the geometry of the scene. The core is a controlled three-stage comparison on nuScenes in which 2D detection is held fixed and only the source of 3D geometry changes. Geometry predicted from images alone reaches 0.183 mean average precision (mAP) under the official protocol; fitting boxes from raw LiDAR points inside the same masks with training-free rules reaches 0.298 mAP / 0.348 nuScenes detection score (NDS) at zero labeling cost; borrowing supervised box geometry at inference time lifts the same detections to 0.413 mAP / 0.555 NDS, which locates the pipeline's largest deficit in measurement precision rather than 2D detection, while class confusion and confidence calibration survive that substitution. Reversing the direction, a three-state camera-witness rule built from the same masks improves a supervised LiDAR-only detector from 0.596 to 0.630 mAP, roughly half the gain of fully supervised camera fusion, with no training. A coverage analysis shows that SAM3 finds 84% of in-range objects with a correctly named mask; the classes that fail in the official metric are misnamed or geometrically unforgiving, not unseen.

0.24

Geometric Refinement and Distributional Alignment for Sim2Real Roadside LiDAR Detection

cs.CV cs.RO ·2026-11-02 ·Aman Upganlawar
publishedcode/datahot direction similarity 0.60
Abstract · 8 pages. 1st place, Track 6 (UrbanTwin Sim2Real LiDAR, LUMPI), DriveX Grand Challenge, ECCV 2026 Workshop. Code: https://github.com/amanupg/…

We describe our approach to the LUMPI track of the UrbanTwin Sim2Real LiDAR Challenge, in which a 3D object detector must be trained exclusively on synthetic data and evaluated on unseen real roadside LiDAR, while the synthetic point clouds are simultaneously scored for distributional realism. Our final entry scores 0.4793 combined, from a detection mAP of 0.1333 and a realism score of 0.9126. Our contribution is not a new architecture. Working from a PointPillars baseline, we obtained most of our gains from three sources. First, a diagnosis that small object failure in roadside LiDAR is a localisation problem rather than a detection problem, which led to a parameter free geometric refinement worth 86 percent relative on pedestrian AP. Second, an audit of our own post processing which revealed that a shipped rule was destroying valid predictions, the repair of which produced our single largest detection gain at 335 percent relative on the Van class. Third, treating the realism metrics analytically rather than as a black box, which showed that one of the four components is a closed form function of nine summary statistics. We also report an experimental methodology that we believe is the more transferable result. Because mean AP decomposes into independent per class terms, a single submission can carry several mutually controlled experiments, and a submission assembled entirely from previously measured components has a score that is known before it is sent. We predicted our final score to four decimal places prior to submission. We report negative results at equal length, and give a full account of data provenance and compliance in Section 8, including a full account of every mechanism contributing to the submitted score.

0.43