CS Paper Radar

GeoPillars: A Large-Kernel Pillar Detector for Single-Sweep LiDAR Under Point Sparsity, and a Decomposition of Its Gain

Chaitanya Dumbre, Shubham Sarkar, Akash Mohapatra, Ghanasham Patil, Sheetal Girase

cs.CV ·submitted 2026-11-19 09:16 UTC · v1
code/datahot direction

Abstract

GeoPillars is a pillar-based 3D detector for single-sweep LiDAR under a hard budget of eight points per 0.4 m pillar, a budget that discards 46.6% of in-range points. It adds geometric pillar features, grouped vector attention within each pillar, a learned absolute positional prior on the bird's-eye-view (BEV) grid, a large-kernel backbone, auxiliary surface-normal supervision and a full-resolution detection head. Trained on 123k synthetic CARLA scans and evaluated on cars, it reaches 81.33 BEV AP@0.7, 13.76 points above CenterPoint at the same input budget and 1.91 points above CenterPoint at its native, denser budget. These are in-distribution figures, because the validation split is per-frame rather than scene-disjoint. A rung-by-rung decomposition shows that the new components explain little of the gain. Raising the detection-head resolution alone recovers 10.19 of the 13.76 points, the joint change of encoder, backbone, neck and positional prior adds 3.37, and the normal-supervision branch adds 0.20, which is within run-to-run variation. With heading reversals folded out, orientation error is similar for all seven models, although GeoPillars reverses headings about half as often as a resolution-matched baseline. It is also the slowest of the seven models. Evaluated zero-shot on 6,743 real nuScenes keyframes, no model transfers, and each retains 3.7% to 12.2% of its CARLA accuracy. A collection defect left LiDAR intensity constant, so every model learned from geometry alone. Code and checkpoints are publicly available.

Comment
16 pages, 13 figures, 8 tables

Closest papers

Nearest neighbours by meaning across the whole index.

UrbanTwin Sim2Real LiDAR Challenge 2026: Site-Calibrated Synthetic Data and Multi-Detector Fusion for Roadside 3D Detection

cs.CV eess.SP ·2026-11-16 ·Arnav Kumar, Brijesh Soni
similarity 0.67
Abstract

This report summarizes the work submitted by team arnav007 (submission ID 1054222) for the UrbanTwin Sim2Real LiDAR Challenge (V2X-Real track) at the IEEE BigData Cup 2026. The primary objective is to train 3D detectors for vehicles, pedestrians, and trucks using only synthetic roadside LiDAR data, and to generate synthetic scans that are realistic enough to be indistinguishable from real ones. A CARLA based pipeline is developed and calibrated to the fixed sensor site, accurately modeling the range image, including no-return beams, based on unlabelled real development scans. A combined inference detector, using multiple 3D detectors (VoxelNeXt, PV-RCNN, and SECOND) trained exclusively on synthetic data, is also proposed. Each scan is aligned to the synthetic ground plane and processed through the detectors at multiple ground heights. The resulting bounding boxes are fused using bird's-eye view (BEV) clustering, followed by class-specific post-processing to refine heading, box size, and filter low-confidence detections. The final submission achieved a combined score of 0.8947. The ablation study shows that per-scan ground leveling more than doubled the real-scan mAP, while fusing boxes across different heights and models further improved performance.

0.21

GA-EIRFS: A Geometry-Augmented Repeat-Factor Sampling Method for Long-Tailed LiDAR 3D Object Detection

cs.CV ·2026-09-29 ·Taufiq Ahmed, Constantino Álvarez Casado, Daniel Herrera Castro, Sasan Sharifipour, Abhishek Kumar +1 more
code/data similarity 0.63
Abstract · 5 pages, 4 figures, Submitted to IEEE ICASSP 2027

Long-tailed 3D object detection is treated as a class-frequency problem, but LiDAR supervision quality depends on object observability: similar frequencies can hide different geometric evidence. We introduce Geometry-Augmented Exponentially Weighted Instance-Aware Repeat Factor Sampling (GA-EIRFS), a detector-agnostic method that modulates a frequency-based repeat factor with a fixed geometry score combining point count, surface-normal entropy, and surface coverage. GA-EIRFS changes only frame-sampling probabilities, leaving the detector and inference unchanged. On nuScenes it improves mean average precision (mAP) and the nuScenes detection score (NDS) in four converged experiments with CenterPoint and PointPillars over two seeds; for CenterPoint at seed 666, mAP rises from 0.552 to 0.563 and bicycle AP from 0.306 to 0.359. Per-class gains correlate with the class sampling-weight increase (Spearman rho=0.70, p=0.025) but not with geometry score alone (rho=0.32, p=0.37), so geometry amplifies frequency-driven need. KITTI results vary across seeds, most for the rarest class. Code: https://github.com/Multimodal-Sensing-Lab/GA-EIRFS.

0.36

Open-vocabulary 3D object detection with promptable segmentation

cs.CV ·2026-09-16 ·Ömer Faruk Deniz, Mustafa Taha Koçyiğit
similarity 0.63
Abstract · 18 pages, 6 figures, 12 tables

Three-dimensional object detection for autonomous driving is dominated by detectors trained on large corpora of human-annotated 3D boxes. Such a detector learns a fixed category list, and everything outside it is invisible. This paper asks whether the task can be solved training-free and open-vocabulary. A promptable segmentation model (SAM3), queried with class names as text prompts, supplies instance masks in the vehicle's six surround-view cameras, and the masks are turned into metric 3D boxes using the geometry of the scene. The core is a controlled three-stage comparison on nuScenes in which 2D detection is held fixed and only the source of 3D geometry changes. Geometry predicted from images alone reaches 0.183 mean average precision (mAP) under the official protocol; fitting boxes from raw LiDAR points inside the same masks with training-free rules reaches 0.298 mAP / 0.348 nuScenes detection score (NDS) at zero labeling cost; borrowing supervised box geometry at inference time lifts the same detections to 0.413 mAP / 0.555 NDS, which locates the pipeline's largest deficit in measurement precision rather than 2D detection, while class confusion and confidence calibration survive that substitution. Reversing the direction, a three-state camera-witness rule built from the same masks improves a supervised LiDAR-only detector from 0.596 to 0.630 mAP, roughly half the gain of fully supervised camera fusion, with no training. A coverage analysis shows that SAM3 finds 84% of in-range objects with a correctly named mask; the classes that fail in the official metric are misnamed or geometrically unforgiving, not unseen.

0.24

HiPFuse: Real-Time LiDAR Semantic Segmentation for Robotic Perception on Edge Devices

cs.CV cs.RO ·2026-11-10 ·Haiyang Wu, George Vosselman, Ville Lehtola
code/data similarity 0.63
Abstract · 13 pages, 6 figures

Real-time robotic perception requires accurate LiDAR semantics under limited resources. Bird's-eye-view (BEV) aggregation is efficient but can mix differently labeled surfaces in columns. We present HiPFuse, a point-BEV fusion framework that exchanges point and height-partitioned BEV features across horizontal scales, combining point-wise detail with 2D spatial context from one LiDAR scan. Fixed height assignments preserve separate vertical aggregation groups, with auxiliary supervision of initial BEV features using targets from the same 3D cells. A dual-scale BEV context module adds broader context from a coarser grid. On SemanticKITTI and MCD, HiPFuse achieves 63.7% and 62.5% mIoU at 14.2 and 22.4 FPS on Jetson AGX Orin, respectively, exceeding the 10 Hz scan rate. Separate training and evaluation show indoor applicability. Replacing only the baseline semantic front end with HiPFuse in fixed robotic systems reduces odometry absolute trajectory error RMSE by 10.6% on average across two outdoor sequences and increases accepted-loop recall by 8.7 percentage points on SemanticKITTI. Qualitative semantic maps show more continuous road labeling. Our code is available at https://github.com/haiyang2022/HiPFuse.

0.35

Dual Architecture Fusion Vehicle Lidar 3D Target Detection

cs.CV ·2026-11-06 ·Muyun Li, Weizheng Jin, Yuan Sun
top venuehot direction similarity 0.61
Abstract · 5 pages, 6 figures. Published in CAIBDA 2026

In this paper, a 3D backbone network (SpconvTransformer) based on the fusion of convolutional architecture branch and Transformer architecture branch is proposed. The convolution branch uses 3D sparse convolution and submanifold convolution to learn local voxel features and semantic information, and the Transformer branch uses the self-attention mechanism to model the remote relationship between voxels, uses the broad receptive field to capture rich context information, and complementing the advantages of the two architectures by fusing the local features extracted from the two branches and the global features solves the problem of limited receptive fields of 3D convolutional neural networks. The experimental results show that the average accuracy of SpconvTransformer in 3D object detection and bird's-eye view detection tasks reaches 81.45% and 88.09%, respectively, and the average directional similarity reaches 91.10%, which is significantly better than other existing algorithms.

0.45

Geometric Refinement and Distributional Alignment for Sim2Real Roadside LiDAR Detection

cs.CV cs.RO ·2026-11-02 ·Aman Upganlawar
publishedcode/datahot direction similarity 0.61
Abstract · 8 pages. 1st place, Track 6 (UrbanTwin Sim2Real LiDAR, LUMPI), DriveX Grand Challenge, ECCV 2026 Workshop. Code: https://github.com/amanupg/…

We describe our approach to the LUMPI track of the UrbanTwin Sim2Real LiDAR Challenge, in which a 3D object detector must be trained exclusively on synthetic data and evaluated on unseen real roadside LiDAR, while the synthetic point clouds are simultaneously scored for distributional realism. Our final entry scores 0.4793 combined, from a detection mAP of 0.1333 and a realism score of 0.9126. Our contribution is not a new architecture. Working from a PointPillars baseline, we obtained most of our gains from three sources. First, a diagnosis that small object failure in roadside LiDAR is a localisation problem rather than a detection problem, which led to a parameter free geometric refinement worth 86 percent relative on pedestrian AP. Second, an audit of our own post processing which revealed that a shipped rule was destroying valid predictions, the repair of which produced our single largest detection gain at 335 percent relative on the Van class. Third, treating the realism metrics analytically rather than as a black box, which showed that one of the four components is a closed form function of nine summary statistics. We also report an experimental methodology that we believe is the more transferable result. Because mean AP decomposes into independent per class terms, a single submission can carry several mutually controlled experiments, and a submission assembled entirely from previously measured components has a score that is known before it is sent. We predicted our final score to four decimal places prior to submission. We report negative results at equal length, and give a full account of data provenance and compliance in Section 8, including a full account of every mechanism contributing to the submitted score.

0.43

Let LiDAR Decide Where to Look: Geometry-Measured Token Selection for Efficient Sparse Latent World Models

cs.CV ·2026-10-29 ·Zeping Zhang, Zhuoya Zhao, Robert Laganière
similarity 0.60
Abstract

Vision-centric autonomous driving models encode thousands of image tokens per frame, yet most depict sky, buildings, or empty road---content irrelevant to planning. Worse, these tokens dilute the planner's attention: we show that randomly discarding 75% of tokens already outperforms the dense model, because the planner can concentrate on the remaining driving-critical content. Building on this finding, we present Geometry-Aware Token Selection (GATS), which uses LiDAR and radar point projections to select a small fraction of image tokens before the vision backbone runs. Because the selector operates on measured 3D geometry rather than visual features, the backbone encodes only the selected patches, cutting end-to-end FLOPs by up to $18\times$. Each kept token receives a 3D anchor from its LiDAR point and is fed to a self-supervised latent world model that predicts future features and 3D displacements without box annotations. At 25% budget, GATS achieves a 3-sec L2 displacement error of 0.520 m on nuScenes and an EPDMS of 88.9 on NAVSIM---surpassing the dense baseline (0.573 m / 85.9) at $6.6\times$ fewer total FLOPs. At an extreme 10% budget (24 GFLOPs, $18\times$ reduction), it still beats the dense baseline on both nuScenes (0.537 m vs. 0.573 m L2) and NAVSIM (87.9 vs. 85.9 EPDMS). On 739 intent-critical scenarios, GATS covers 95.8% of hazardous vehicles and achieves a 0.09% collision rate---73.5% lower than the dense model (0.34%).

0.19

OrthoMark: Place Recognition with Point-Anchored Orthographic Height Mark

cs.RO cs.CV ·2026-11-16 ·Haichuan Li
similarity 0.60
Abstract

LiDAR place recognition provides the loop closures of Simultaneous Localization and Mapping(SLAM). Perspective from Z-axis, a gravity-aligned scan is an orthographic map of the scene, and a revisit from another position and heading moves this map rigidly in the plane, a motion that a polar Fourier spectrum ignores and phase correlation recovers. Along the vertical, the heights of the returns describe the structures, but which heights are observed depends on the range, because the sensor's vertical field of view cuts nearby structures low; height thus misleads a global key, yet is decisive once two scans are aligned and compared cell by cell where they overlap. We present \method, a training-free method built on one principle: two LiDAR scans can only be compared through features computed from the same geometric surfaces in both scans. \method retrieves candidates with a translation- and rotation-invariant polar spectrum of the bird's-eye view (BEV), 1.9,KB per keyframe, and verifies each candidate by estimating its planar pose through phase correlation and scoring it with \emph{point-anchored height columns}: every BEV cell keeps a 16-bit mask of the heights of its own returns; within a session, the score is weighted by the expected overlap of the two scans' sensing ranges, computed from their distance. We show that this vertical link pays off in verification but hurts in retrieval, where what a height slice contains depends on the range to the structure. For single robot, \method has the highest AP of the training-free methods without 3D registration on the KITTI development sequences; across robots, on all multi-robot sequences, it matches or exceeds RING++ at 1/350 of its descriptor size and closes more inter-robot loops than the learned BEVPlace++ on all tests.

0.28