CS Paper Radar

Bounded Channel-Adaptive Spectral Learning for Forward-Consistent Inverse Flapping-Wing Aerodynamics

Haichuan Li

cs.RO ·submitted 2026-09-30 01:06 UTC · v1

Abstract

Flapping-wing vehicles regulate aerodynamic forces and moments through coordinated variations in stroke, deviation, and pitch motion. Because the resulting loads depend on both the instantaneous wing configuration and its preceding motion history, recovering suitable wing kinematics from a desired aerodynamic trajectory is a challenging inverse problem. Existing sequence models capture temporal dependencies, while spectral methods can exploit the periodic structure of flapping motion. However, unrestricted frequency-domain augmentation may interfere with temporal representations and produce inconsistent corrections across kinematic variables and prediction horizons. We propose the Bounded Channel-Adaptive Spectral Residual Gated Recurrent Unit (BCS-GRU), which retains recurrent temporal prediction as its primary representation and restricts spectral information to a controlled output-specific correction. We further introduce a causally aligned forward-consistency objective that evaluates predicted kinematics through a separately trained and frozen aerodynamic surrogate. Experiments under a unified episode-level protocol show that BCS-GRU improves inverse prediction over recurrent and adaptive-spectral baselines, with greater benefits at longer prediction horizons. Forward-consistent fine-tuning further improves surrogate-based aerodynamic consistency while maintaining mean kinematic accuracy. These results demonstrate that controlled spectral correction and forward-consistent learning provide an effective framework for history-aware inverse modelling of flapping-wing aerodynamics.

Closest papers

Nearest neighbours by meaning across the whole index.

FlapKAD: A Simulation Dataset of Coupled Wing Kinematics and Aerodynamic Dynamics for Flapping-Wing Aerial Vehicles

cs.RO ·2026-09-30 ·Haichuan Li
benchmark similarity 0.74
Abstract

Experimental investigation and modeling of flapping-wing aerial vehicles are limited by the scarcity of large-scale records that temporally align wing kinematics, aerodynamic responses, and flight states. Existing datasets are often limited in scale and affected by measurement noise and temporal misalignment between rapidly varying wing motion and the associated dynamic response, particularly during high-frequency flapping. We introduce FlapKAD, an episode-structured simulation dataset comprising 2,000 rigid-wing flight episodes and 720,152 valid time steps, with bilateral wing kinematics, aerodynamic responses, and flight states recorded synchronously within a common clock. FlapKAD supports a unified bidirectional sequence-prediction benchmark constructed from the same temporally aligned episodes. The forward task predicts future vertical force coefficients and body vertical velocity from histories of realized flap and twist angles, whereas the inverse task reconstructs future flap- and twist-angle trajectories from the corresponding response histories. A benchmark of eight representative time-series architectures across multiple prediction horizons reveals direction- and horizon-dependent model behavior, systematically higher reconstruction errors for twist angle than for flap angle, and no consistent advantage from increased architectural complexity. FlapKAD provides a reproducible dataset and benchmark for studying coupled wing-kinematic, aerodynamic, and flight-state dynamics in flapping-wing aerial vehicles.

0.27

Airfoil2Vec: Spectral Geometry-Conditioned Neural Surrogate Models for Airfoil Aerodynamics and a Downforce-Generating CFD Dataset

cs.LG physics.flu-dyn ·2026-09-25 ·Haitz Sáez de Ocáriz Borde, Flavio Savarino, Andrei Cristian Popescu, Pietro Innocenzi, Pantelis Papageorgiou +1 more
datasetcode/data similarity 0.63
Abstract

We introduce a dataset of approximately 10,000 Reynolds-Averaged Navier-Stokes (RANS) simulations of steady, incompressible, two-dimensional subsonic flow around downforce-generating NACA 4-digit airfoils, targeting aerodynamic regimes relevant to automotive and motorsport applications (openly available on https://huggingface.co/datasets/ratiolabs/downforce-airfoils). Using this resource, we study geometry-conditioned neural surrogates for fast flow prediction, comparing neural fields with neural ODEs, MLPs with graph-based models, and several spectral geometry-conditioning methods. We further propose Airfoil2Vec, an airfoil-specific spectral geometry encoder that combines the joint contour spectrum with separate spectral representations of camber and thickness, for predicting continuous pressure and velocity fields. We evaluate generalization through angle-of-attack interpolation, interpolation and extrapolation to unseen NACA 4-digit geometries, and generalization to unseen non-NACA airfoils. The resulting surrogate accurately captures aerodynamic quantities and qualitative flow features while providing orders-of-magnitude speedups over conventional computational fluid dynamics.

0.21

CIS-Transolver: A Cross-layer Incremental-State Neural Operator for Fine-Scale Automotive Aerodynamic Flow Prediction

cs.LG cs.AI ·2026-10-19 ·Jianglong Liu, Zhicheng Zhu, Jia Hao, Liangyue Jia, Wenxuan He
similarity 0.60
Abstract

Neural operators offer an efficient data-driven approach to predicting complex automotive aerodynamic flows. However, spectral bias limits their ability to reconstruct fine-scale flow variations around geometric features such as side mirrors and wheel arches. Reliable assessment of local geometric changes therefore requires models that capture fine spatial detail together with global flow interactions. Inspired by iterative refinement and state evolution, we propose CIS-Transolver, a cross-layer incremental-state neural operator that integrates local multiscale information into global flow modeling. The method extracts local feature variations and encodes them as zeroth- to second-order geometric moments. These encodings are combined with information from earlier layers to form a cross-layer memory. Memory-derived corrections enter the value branch of Physics-Attention, allowing local details to inform global physical-state interactions throughout the network. We systematically evaluate CIS-Transolver on three public automotive aerodynamics benchmarks, ShapeNet-Car, AhmedML, and DrivAerNet++, covering surface pressure fields and volumetric pressure and velocity fields. CIS-Transolver achieves the lowest mean relative L2 error among the evaluated methods for all five prediction metrics across the three benchmarks. Relative error reductions average 8.72% compared with the best baseline for each metric. Also achieves the lowest high-frequency spectral errors across all five metrics, with an average relative reduction of 16.06% compared with the best baseline. These results support cross-layer reuse of local information for fine-scale automotive flow prediction.

0.21

A Data Fusion Framework for Grounding Aerospace Surrogate Model via Experimental Wind-Tunnel Observations

cs.LG ·2026-09-02 ·Nitin Nagesh Kulkarni, Dheeraj Vemula, Yin Yu, Peter Lyu, Juan J. Alonso
hot direction similarity 0.60
Abstract

Aerodynamic surrogate models trained on high-fidelity CFD data reproduce numerical predictions of both scalar outputs and entire fields accurately, yet their predictive fidelity is limited by systematic discrepancies between CFD and experimental observations. We present an experimentally grounded correction framework that adapts a CFD-trained deep learning surrogate using wind-tunnel PSP measurements. A Geotransolver surrogate trained on 2,300 high-fidelity CFD simulations of the NASA CRM wing-body configuration, spanning geometric variation, Mach 0.70-0.85, and angles of attack 0 to 4 degrees, reproduces the CFD integrated aerodynamic forces and pitching moment to R2 > 0.99 but does not match the experimental data. To incorporate experimental information without retraining the surrogate, a correction network is trained on spatially registered PSP measurements at two freestream Mach numbers (0.70 and 0.85) across the same angle-of-attack range, learning the discrepancy between the surrogate-predicted and experimentally measured surface-pressure distributions. At Mach 0.85 the correction substantially improves agreement with PSP, particularly at the wing suction peak, shock location, and subsequent pressure recovery, reducing both the magnitude of the prediction error and the fraction of wetted surface on which it exceeds 0.05 in Cp, and it does so from a limited experimental dataset without modifying the pretrained surrogate parameters. On held-out angles of attack the grounded surrogate agrees with measurement to within 2.3-2.7% of the measured Cp range, and outperforms direct interpolation between the measured conditions at every state tested. Experimental measurements can therefore ground a large-scale simulation-trained surrogate by learning systematic CFD-to-experiment discrepancies while preserving its generalization capability and computational efficiency.

0.29

VATO: A Vortex-Force-Aware Transformer Operator for Unsteady Separated Aerofoil Flows

cs.LG ·2026-09-01 ·Xingxin Yang, Zhan Zhang, Yichen Li, Juan Li
similarity 0.59
Abstract

Accurate prediction of unsteady separated flows is challenging because the aerodynamic loads depend on nonlinear separation and vortex-shedding dynamics. Although high-fidelity CFD resolves these mechanisms, its cost limits repeated use in design and control. Standard field-level surrogate training, however, does not distinguish the flow regions that contribute most strongly to the aerodynamic loads. We introduce VATO (Vortex-Force-Aware Transformer Operator), which couples the Vortex Force Map (VFM) method to a geometry-aware neural operator through two complementary mechanisms. VATO-S adds training-only supervision of the local VFM force-contribution field, with no increase in model size or inference cost. VATO-A uses VFM contribution and sensitivity fields to prioritise force-relevant source locations for residual cross attention. The methods are evaluated on unsteady CFD data for double-edged-plate aerofoils over 54 trajectories from nine geometries. Over lead times of 1-20~ms, VATO-S reduces velocity, pressure, and vorticity errors by 10.4\%, 1.0\%, and 15.6\%, respectively, while VATO-A achieves reductions of 15.8\%, 7.5\%, and 31.2\%. VATO-S gives the lowest VFM-derived drag error, whereas VATO-A gives the lowest pressure-derived lift and drag errors. Over lead times extending 50\% beyond the training range, VATO-A retains a 26.9\% reduction in vorticity error and larger improvements in all four force readouts, despite reduced gains in velocity and pressure. These results show that force-aware operator learning can improve both flow-field prediction and aerodynamic functional accuracy in unsteady separated flows.

0.28

Measuring and Improving Transfer of Neural Surrogates for Vehicle Aerodynamics

cs.LG physics.flu-dyn ·2026-11-18 ·Favour Nerrise, Julian Busch, Gurpreet Singh Hora, Martin Sipka, Danielle C. Maddix +1 more
theory similarity 0.59
Abstract · 23 pages, 5 figures, 13 tables

Neural surrogates for external vehicle aerodynamics are fast alternatives to physics-based computational fluid dynamics (CFD) simulations. Their foundational limitation is a lack of zero-shot generalization across vehicle classes, which results in an expensive, custom training campaign for each new vehicle design. Similar to pretrained models in other fields, a pretrained surrogate should adapt to a new vehicle class using only a few simulations and stay accurate on its pretraining domain. No prior study has systematically tested this transfer behavior. We conduct a large-scale, controlled benchmarking study on five DrivAerML-pretrained surrogates across four independent target datasets. These datasets differ from the source in geometry, CFD solver, turbulence model, and flow conditions. We find that fine-tuning these surrogates outperforms training from scratch in fewer than half of the comparisons and lowers the accuracy of the surrogate on its source dataset. We introduce GeoReplay, a geometry- and gradient-aligned source replay that keeps source simulations resembling the target in training and applies their updates only when they agree with the target gradient. A risk bound separates geometric coverage from differences in the simulated physics, and we prove that every sufficiently small GeoReplay step decreases the target training objective. GeoReplay lowers the source error of fine-tuning in 77 of 80 settings and matches its target accuracy.

0.15

RecMorph: Topology-Guided Spatial Recurrence for Generalized Morphology Control

cs.RO cs.LG ·2026-09-16 ·Quanrui Rao, Yong Liu, Xueming Xiao, Yingbo Luo, Kun Wu +2 more
code/data similarity 0.58
Abstract · 26 pages. Code and experimental resources are available at https://github.com/quanruirao/RecMorph

Generalized morphology control requires a single policy to transform information across limbs with different physical roles, coordinate whole-body motion, and remain efficient as body size grows. Existing communication mechanisms address these requirements only partially. We introduce RecMorph, a topology-guided spatial recurrent architecture that uses recurrent sequence computation to jointly perform cross-limb communication and representation transformation. A depth-first traversal converts the kinematic tree into a morphology-derived sequence, along which shared bidirectional transitions progressively transform limb information before action decoding. Residual preservation, RMS normalization, and input-dependent channel modulation stabilize this repeated spatial transformation, yielding linear token complexity at fixed model width and depth. Across five UNIMAL tasks, RecMorph achieves the strongest mean final training performance among the evaluated generalized morphology controllers and the highest measured inference throughput on FT, while generalizing to unseen variations and bodies with up to 30 limbs. We further migrate representative generalized controllers from UNIMAL benchmarks to a four-platform quadruped setting. RecMorph achieves the best macro-averaged performance under nominal and high friction, reduces nominal velocity RMSE by 43.5% relative to specialist MLPs, and one shared policy completes 40 physical Go1/Go2 trials without falls. These results show that topology-guided recurrent transformation provides an effective and efficient communication mechanism for Generalized Morphology Control and remains effective when transferred from procedural bodies to physical robot platforms. Code and experimental resources are publicly available at https://github.com/quanruirao/RecMorph.

0.45

Measurement-Calibrated Synthetic Pretraining for Rapid Adaptation of UAV Channel Predictors

eess.SP cs.LG ·2026-11-12 ·Qiuheng Zhou, Wei Jiang, Donglin Wang, Hans D. Schotten
published similarity 0.58
Abstract · 6 pages. Accepted version of a paper presented at the 2026 IEEE 104th Vehicular Technology Conference (VTC2026-Fall), Boston, MA, USA

Unmanned aerial vehicle (UAV) links can change faster than route-specific channel data can be collected, so a channel predictor must often be adapted from only a short target-flight calibration segment. This paper studies measurement-calibrated synthetic pretraining as an offline source prior for rapid adaptation of channel state information (CSI) predictors. The synthetic source is calibrated to flight-only power evolution, temporal shape variation, frequency selectivity, and phase disturbance, and is then combined with measured source-flight fine-tuning before target-flight adaptation. Under chronological held-out flight splits, synthetic-to-real (S2R) fine-tuning reduces the measured-data budget needed to reach useful prediction in the low-data regime. For 50 ms-ahead prediction, it crosses a latest-channel-estimate persistence baseline with 50 measured training windows, roughly 0.5 s of 10 ms-spaced supervised windows, whereas training from scratch requires 600 windows. A target-prefix adaptation study further shows that a lightweight gated recurrent unit predictor can reuse the pretrained source prior with one prediction-layer update epoch, positioning measurement-calibrated synthetic pretraining as a reusable prior for scarce target-flight measurements.

0.40