CS Paper Radar

A multi-stage probabilistic framework to estimate gas-fired generator performance during extreme winter weather

Sajjad Uddin Mahmud, Anamika Dubey

cs.LG stat.ML ·submitted 2026-10-03 08:07 UTC · v2

Abstract

Extreme winter weather has repeatedly disrupted gas-fired power generation in the United States, yet the plant-level data needed to systematically quantify outage risk remain proprietary. Using publicly available weather and electricity demand data together with anonymized generator contingency records from the North American Electric Reliability Corporation (NERC), we develop a three-stage Bayesian probabilistic framework for estimating winter-driven generator performance. Applied to New York State (2013--2022), the framework sequentially estimates: the hourly probability of a generator contingency event, the expected net available capacity conditioned on an event occurring, and the event duration. Colder conditions and higher electricity demand are associated with higher failure probability, lower retained capacity, and longer event duration. Under the most severe observed stress conditions, estimated mean hourly event probability reaches 24\% , while expected mean net available capacity falls to 13\% of nameplate rating. Full outage events have a median duration of 12.7 hours, while partial derating event duration increases from 2.4 to 7.1 hours with capacity loss severity. The proposed framework establishes a transferable baseline that utilities with access to plant-level records can directly extend to obtain more precise reliability estimates for operational planning and resource adequacy assessment.

Closest papers

Nearest neighbours by meaning across the whole index.

Probabilistic electrical power demand forecasting with uncertainty quantification

cs.LG cs.AI ·2026-09-28 ·Mahesh Neupane, Pragya Dhungana, Pradip Khatri, Swechhya Baskota, Hariom Dhungana
similarity 0.64
Abstract

The majority of research on electricity consumption forecasting has focused on deterministic approaches, which generate a single point estimate for each time step in the forecasting horizon. However, the increasing penetration of renewable energy sources and the growing complexity of modern smart grids have introduced greater variability and uncertainty into power-system demand and operation. Consequently, probabilistic forecasting, which quantifies the uncertainty and variability associated with future electricity demand, is becoming increasingly important for reliable power-system planning and operation. This study presents an empirical comparison of four contemporary probabilistic forecasting models for electricity consumption, highlighting their respective strengths and limitations. We have performed comparision on real-world power systems related datasets. Across all power-consumption zones, NGBoost demonstrates superior probabilistic forecasting performance, achieving the lowest MAE and RMSE while providing well-calibrated uncertainty estimates with high prediction-interval coverage and reasonably narrow intervals. These results indicate that NGBoost offers a more accurate and reliable forecasting framework than Bayesian, Monte Carlo (MC) Dropout, and Gaussian Process Regression (GPR) models for the considered electricity consumption data.

0.16

Long-Term Operational Planning Using Scenario-Based System Load Forecasting

cs.CR ·2026-09-28 ·Akash Debnath, Shiuli Subhra Ghosh, Jaime De La Ree, Alex Freeman, Kavin D Jones
similarity 0.62
Abstract

The rapid expansion of hyperscale data centers is significantly increasing electricity demand in Northern Virginia. Dominion Energy, the region's primary electric utility, must reinforce its transmission network to support this growth. These projects require planned outages that must be evaluated months in advance to support construction planning and outage coordination while meeting NERC and PJM N-1 reliability requirements. Long-term outage studies are commonly performed day by day using monthly or seasonal peak-load assumptions. Although this approach simplifies analysis, it can be overly conservative because it does not capture granular load variability. Consequently, short-duration outages that may be feasible under realistic loading conditions are often postponed or denied, delaying critical transmission expansion and grid modernization projects. This paper evaluates the operational value of incorporating realistic multigranular load forecasts into long-term, contingency-based outage assessments and compares the results with conventional peak-based methods. Daily, weekly, and monthly forecasts are developed using statistical and machine-learning models, including SARIMA, Prophet, Gradient Boosting, and Random Forest, followed by bottom-up temporal reconciliation to maintain consistency across forecast horizons. Results show that granular load forecasts reduce unnecessary conservatism and improve outage accommodation, particularly for short-duration requests, without changing existing reliability criteria. The proposed approach can strengthen long-term outage coordination and support timely transmission reinforcement and grid modernization.

0.20

Compound Climate Risk-Aware Electricity Dispatch: Trajectory-Based Modeling for Power System Resilience

eess.SY ·2026-10-29 ·Feiyu Cai, Jing Qiu, Chenxi Zhang, Yi Yang, Yuechuan Tao +1 more
similarity 0.60
Abstract · 10 pages, 8 figures

In recent decades, emerging compound hazards in a changing climate have increasingly threatened power system resilience and posed new challenges to electricity dispatch. Conventional Value-at-Risk (VaR)-based risk-aware dispatch provides a tractable means of managing stochastic net demand deviations caused by distribution feeder outages. However, when applied to temporally compounding events such as tropical cyclone (TC)--blackout--heatwave, conventional net demand risk formulations may assign similar risk levels to a brief outage and an outage with the same instantaneous net demand impact that persists into a subsequent hazard, despite their different requirements for sustained operational flexibility. Moreover, directly incorporating compound risk into electricity dispatch models faces a structural mismatch: the risk is defined by the joint distribution of feeder restoration and subsequent hazards over exponentially many joint states, whereas dispatch models require risk formulations that are tractable in the scheduling decisions. To address these issues, this paper proposes a compound climate risk-aware dispatch framework with a trajectory-based compound risk model, which defines the loss on operating deviations determined by entire feeder connection trajectories, parameterized by uncertain restoration times and coupled with subsequent hazards. Analytical moment-generating functions and equivalent exponential-cone reformulations provide a compact representation of the resulting risk constraints, preserving the relevant dependencies without explicit joint-state enumeration. By leveraging a physics-based spatiotemporal TC--blackout--heatwave hazard model, case studies demonstrate the effectiveness of the proposed method with real-world time-series power outage data from Puerto Rico, including data collected during Hurricane Fiona in 2022.

0.34

Learned Control Variates for Rare Grid-Outage Estimation at Electric Vehicle Charging Stations

cs.AI cs.CEeess.SYstat.ML ·2026-10-19 ·Sulyman Iyanda, Mansur Arief
similarity 0.60
Abstract

Public charging of electric vehicles (EVs) adds a large and synchronized load to the distribution feeders. In most networks, it is rare to overload a feeder at the same time. When it does happen, the consequences can be severe: an overloaded feeder stresses its transformers and can trigger cascading outages across a city. Planners who design for high reliability therefore need to estimate very small outage probabilities. To that end, plain Monte Carlo estimation with an expensive grid simulator can require a prohibitively large number of runs for this task. To reduce the number of runs, we propose a control variate (CV) built from a learned classifier of the outage, trained on cheap observable features such as temperature and load forecasts. We show that for any binary learner, the variance reduction is an explicit function of its recall and false-positive rate. Furthermore, we show that control variate based on a Gaussian proxy of the load loses its effect as outages become rarer, while a learner with non-vanishing precision keeps removing a fixed fraction of the variance even in the extreme rare-event regime. We verify these results in numerical experiments using a feeder-overload simulator across three orders of magnitude of outage probability and obtain that even weak learner with a single feature can remove a quarter of the variance, while a boosted-tree learner is able to remove about 60%. We then apply the estimator to the feeder network of Surabaya, Indonesia, in which the Gaussian load model leaves every feeder three to seven times the one-day-in-ten-years blackout target. At the same simulation budget, planning the reserve with the learned CV and a 95% confidence limit reduces the city-wide blackout days by a third compared with Monte Carlo. These results show that learned control variates can help planners design distribution grids that stay reliable against rare outages.

0.20

OutageDiT: A Foundation Model for Power Outage Forecasting and Scenario Generation

cs.LG cs.AI ·2026-09-01 ·Yunqin Zhu, Feng Qiu, Yao Xie
published similarity 0.60
Abstract · 11 pages, 3 figures, 3 tables. Accepted at the NeurIPS 2026 Second Workshop on MLxOR

Power-outage planning requires scenarios before an event occurs. These scenarios must represent uncertainty in magnitude, timing, and duration while preserving temporal dependence. However, severe events are rare, and data from any single region contain few examples of extreme outage and restoration patterns. To address this challenge, we introduce OutageDiT, a foundation model for generating seven-day outage trajectories at 15-minute resolution, trained on outage and weather records across the United States. Specifically, a condition encoder processes historical context and known future covariates once per forecast, and a shallow flow-matching decoder reuses the resulting horizon-aligned states to sample complete outage trajectories. This enables point forecasting, uncertainty quantification, and conditional scenario generation within one deep generative model. Across outage forecasting benchmarks, OutageDiT improves forecast accuracy and scenario quality over strong baselines and supports zero-shot transfer to held-out regions. Together, these results position conditional outage scenario generation as a bridge from outage forecasting to operational planning under uncertainty.

0.26

Cascading Contingency Analysis of Modern Power Systems Using a Stochastic Hybrid Systems Framework

eess.SY eess.SP ·2026-11-10 ·Masoud H. Nazari, Hamid Varmazyari
published similarity 0.59
Abstract · This paper was accepted at the 2026 North American Power Symposium (NAPS)

This paper presents a cascading contingency analysis and risk assessment framework that incorporates probabilistic mode transitions motivated by stochastic hybrid system (SHS) concepts together with power-flow-based stress evaluation. A two-stage modeling approach is adopted in which sensitivity-based analysis is first used to identify candidate cascading transitions, followed by DC power flow re-evaluation to accurately capture post-contingency stress redistribution, islanding behavior, and load shedding. A probabilistic propagation model is constructed using mode-dependent transition probabilities derived from line loading conditions. A Cascading Risk Index (CRI) is introduced to quantify the expected load shedding accumulated over cascade progression. Case studies on the IEEE 39-bus system demonstrate that the proposed framework captures diverse cascading routes under multiple initiating outages and identifies critical propagation patterns that are not revealed by N-1/N-2 screening. The results highlight the importance of SHS modeling in assessing cascading risk and providing a scalable framework for resilience evaluation in modern power systems.

0.43

Recovering Plausible Transmission Outage Scenarios

eess.SY math.OC ·2026-10-21 ·Karen Ji, Cameron Khanpour, Samuel Talkington, J. Kyle Skolfield, Daniel K. Molzahn
similarity 0.58
Abstract

Expansion planning for extreme weather needs outage scenarios that specify which transmission branches fail. However, public outage records often only report customers without power by county, making it unclear how to exploit this information to create outage scenarios. We propose a method to recover sets of outaged branches that most closely match regional load shed data. This gives us sets of plausible outages for a given hazard event. We formulate a bilevel problem with a load shedding DC optimal power flow in the lower level. We relax the binary branch states to differentiate the lower level problem, replace it with its sensitivity matrix, and use gradient descent to update the upper level. We treat the relaxed branch states as probabilities and perform randomized rounding to restore integrality. On three test systems with synthetic outages, the recovered sets reduce the load shed error to $0.02-4.5\%$. On the California Test System with storm data from December 2025, the error falls to $23\%$. These scenarios give expansion planning a reliable source of outage data tied to observed hazards.

0.17

Adaptive Residual Modeling for Scenario Learning in Probabilistic Load Forecasting

eess.SY ·2026-11-02 ·Jinbao Wang, Jun Liu, Shiliang Zhang, Xuehui Ma, Yushuai Li +1 more
similarity 0.58
Abstract

Uncertainties in weather, user behavior, and distributed energy production introduce significant variability into feeder power. Effective power system operations require both multi-horizon load forecasts and well-calibrated extreme quantiles for the forecast. Nevertheless, standard objectives that fit the full forecast distribution often underemphasize rare observations and extremes. Conversely, applying heavy tail-weighting in the distribution to capture these extremes can distort the underlying probability distribution. To address this issue, this paper proposes adaptive residual modeling for scenario learning (ARMSL), a two-stage framework. Particularly, Stage I in our framework sequentially models environmental response, history-dependent load patterns, persistent residual deviations, and the remaining innovations. Upon the modeling, we then generate joint active- and reactive-power scenarios with state-dependent dispersion. Stage II keeps the scenario model fixed and calibrates extreme marginal quantiles using a simple, channel-specific reference forecast (an anchor). Only outward deviations from this anchor are admitted, with their contribution determined by local calibration history and the current operating state. From our numerical simulations on FeederBW dataset, Stage I outperforms diffusion baselines in energy and variogram scores. Our complete framework achieves an active-power 0.99-quantile pinball loss of 0.1932 (a 30.08% to 85.33% reduction relative to three baselines) with 1.054% exceedance rate against a nominal 1%. From simulations on the Rolle dataset, we observe decreased losses by 5.39%--14.40% compared to the active-power-only anchor. Furthermore, the unchanged Stage I scenarios in the simulation yield a correlation of 0.953 between predicted and observed feeder event rates, with 90.0% of feeder errors falling within two percentage points.

0.23