CS Paper Radar

Conformal Risk Control for Multiuser Beamforming

Aman Goel, Sundeep Prabhakar Chepuri

eess.SP ·submitted 2026-10-03 15:11 UTC · v1

Abstract

We consider multiuser downlink beamforming with prescribed signal-to-interference-plus-noise ratio (SINR) requirements under imperfect channel state information and a tight transmit power budget. Robust worst-case designs often require tractable channel-error models and may not yield feasible beamformers that meet the power budget. To alleviate these issues, we propose conformal risk control for beamforming (CRCBeam), which combines the classical fixed-point minimum-power beamforming with conformal risk control to calibrate an SINR margin from calibration sample pairs of estimated and true channels. Under exchangeability, CRCBeam provides finite-sample control over served-outage risk, which is the probability of transmitting when at least one user fails to meet its SINR target. CRCBeam requires no parametric channel-error model and transmits only when the power budget is met. Numerical experiments using a pilot contamination channel error model corroborate that CRCBeam achieves the served-outage risk while meeting the power budget. In contrast, worst-case robust baselines, Gaussian-ball and conformal-ball beamforming, either do not meet the target risk or exceed the power budget.

Comment
5 pages with references on the 5th page

Closest papers

Nearest neighbours by meaning across the whole index.

Distributionally Robust Linearly Constrained Minimum Variance Beamforming Under Steering-Vector Mismatch

eess.SP ·2026-09-15 ·Raneem Madani, Abdel Lisser, Zeno Toffano
code/data similarity 0.57
Abstract

Linearly constrained minimum variance (LCMV) beamforming is a fundamental technique for controlling the array response toward multiple desired signals while suppressing interference and noise. In practical systems, however, the steering vectors involved in the response constraints are often affected by direction-of-arrival errors, calibration imperfections, and other array uncertainties. Such mismatches may cause constraint violations and substantial performance degradation. This paper investigates multi-signal LCMV beamforming under steering-vector mismatch and develops probabilistic constraints to guarantee a prescribed reliability level for each desired signal. Several uncertainty-information settings are considered. When the exact mismatch distribution is known and belongs to the class of complex elliptically symmetric distributions (CES), a distribution-informed convex safe reformulation is derived using exact CES quantiles. When the mismatch distribution is unknown, and only partial statistical information or empirical data is available, robust probabilistic reformulations are developed under moment-based ambiguity, support-based uncertainty, and Wasserstein data-driven ambiguity, and the resulting deterministic formulations can be expressed as convex second-order cone programs. Numerical experiments show that the proposed designs improve out-of-sample reliability and reduce beam-gain sensitivity to steering-vector mismatch, while maintaining competitive output signal-to-interference-plus-noise (SINR) ratio and robust beampatterns.

0.36

Worst-User Outage Probability Minimization in Active RIS-Aided Systems

cs.IT eess.SP ·2026-11-01 ·Donghwan Shin, Hyeongtaek Lee, Junil Choi
published similarity 0.57
Abstract · 5 pages, 2 figures, accepted to IEEE Wireless Communications Letters

In this paper, a worst-user outage probability minimization problem in active reconfigurable intelligent surface (RIS)-aided systems is addressed. Since the resulting problem involves a discontinuous objective function over an unknown channel distribution, a sequence of reformulations is applied by integrating a probability-simplex user weighting, a softplus surrogate for differentiability, and entropic tail-risk aggregation for rare but severe outage events. Based on the reformulated problem, a data-driven stochastic optimization technique that relies on historical channel samples is adopted to jointly optimize the beamformer and reflection coefficients with projected adaptive moment estimation. Simulation results show advantages of the proposed technique for reliability-oriented active RIS transmission design.

0.36

TRACE-CRC: Trajectory-Adaptive Conformal Risk Control for Multi-Step Channel State Information Prediction

cs.LG stat.ML ·2026-08-27 ·Kiarash Rezaei, Mehdi Sattari, Javad Aliakbari, Tommy Svensson, Paolo Monti +1 more
top venue similarity 0.57
Abstract · Published in Proceedings of Machine Learning Research (PMLR), volume 329, Conformal and Probabilistic Prediction with Applications (COPA 202…

Reliable prediction of time-varying channel state information (CSI) is essential for efficient wireless communication. Each CSI frame is a matrix-valued representation of the wireless channel response, and a sequence of CSI frames forms a temporal channel trajectory. Modern deep learning-based CSI predictors, however, often provide only point predictions and lack calibrated uncertainty estimates. This limitation is particularly problematic in multi-step CSI prediction, where the target is a sequence of future CSI matrices, and downstream decisions such as beamforming or scheduling may fail if any part of the predicted trajectory is unreliable. We propose trajectory-adaptive calibration and error profiling with conformal risk control (TRACE-CRC), a method for trajectory-aware uncertainty quantification in multi-step CSI prediction. TRACE-CRC constructs Frobenius-norm uncertainty balls around predicted CSI matrices and controls the risk that at least one future frame is uncovered. Instead of calibrating each future step independently, TRACE-CRC combines future-step-dependent error profiling, trajectory difficulty stratification, and learn-then-test (LTT) risk control. Empirically, TRACE-CRC achieves reliable trajectory-level coverage with substantially smaller uncertainty balls than conservative multi-step corrections, while avoiding the trajectory undercoverage of compact stepwise and adaptive conformal baselines.

0.42

Robust Beamforming and Power Allocation for Coherent Cell-Free Massive MIMO with Residual Calibration Errors

eess.SP ·2026-08-11 ·Mingjun Sun, Xidong Mu, Shaochuan Wu, Chongjun Ouyang, Hyundong Shin
similarity 0.57
Abstract

This paper investigates robust downlink transmission to tolerate calibration aging in time-division duplex cell-free massive multiple-input multiple-output (CF-mMIMO) systems with residual calibration errors (RCEs). Unlike existing studies that typically treat RCEs as static impairments, we develop a time-evolving RCE model that characterizes the joint effects of residual phase mismatches, residual carrier frequency offsets, and oscillator phase noise. Based on this model, two practical processing architectures are considered: instantaneous calibrated-channel-based robust beamforming (BF) and statistical beamformed-channel-based robust power allocation (PA). For both architectures, tractable achievable rate lower bounds are derived, which explicitly reveal the impact of calibration aging on coherent combining, BF-gain uncertainty, and inter-user interference. Using these lower bounds as design metrics, we formulate an effective weighted sum-rate (EWSR) maximization problem over the data transmission interval, so that the resulting BF and PA designs can account for the temporal evolution of RCEs rather than a single calibrated instant. To efficiently solve the resulting problems, a Gauss--Legendre quadrature-based weighted minimum mean square error (WMMSE) optimization framework is developed, where both robust BF and PA are updated in an access point (AP)-block manner with closed-form solutions under per-AP power constraints. Simulation results demonstrate that: i) the proposed algorithms exhibit stable convergence; ii) the proposed robust BF and PA schemes achieve higher EWSR by explicitly accounting for calibration aging than their non-robust counterparts; and iii) robust BF achieves higher spectral efficiency (SE), whereas robust PA provides a more favorable tradeoff between SE and implementation cost in terms of computational complexity and fronthaul overhead.

0.04

Post-Hoc Conformal Prediction for Reliable Wireless Communications

eess.SP ·2026-09-22 ·Xin Su, Meiyi Zhu, Osvaldo Simeone, Carlo Fischione
similarity 0.56
Abstract

Deploying artificial intelligence (AI) in high-stakes wireless applications such as autonomous transportation requires guarantees of reliable operation. Such guarantees can often be obtained by designing systems that act on a set of predictions via conservative policies catering to all possible outcomes within the set. For instance, in location-based beam selection, a base station may identify a set of plausible locations and select a beam that ensures high capacity over the set. The miscoverage probability of the set with respect to the true outcome (e.g., the true user location) then quantifies the outage probability, while the size of the set determines the final performance or resource budget (e.g., the transmission capacity). Conventional conformal prediction (CP) applies when the target miscoverage level is prescribed in advance. However, in practical wireless systems, prediction sets may instead be selected under prescribed operational constraints, requiring the resulting miscoverage probability to be quantified post hoc. This paper develops a formal statistical framework for the data-driven selection of prediction sets that provides a reliable estimate of the resulting miscoverage probability. The methodology builds on backward CP and probably approximately correct CP, yielding distribution-free reliability guarantees on the miscoverage probability. We apply the framework on three distinct wireless applications: narrowband interference detection, near-field localization, and codebook-based beam identification. Numerical results validate the reliability guarantees and show that the proposed post-hoc conformal methods achieve accuracy comparable to the naive probability-based approach across all considered applications.

0.39

Finite-Resolution Microwave Linear Analog Computer (MiLAC)-Aided Multiuser Beamforming

eess.SP cs.IT ·2026-09-28 ·Zheyu Wu, Bruno Clerckx
theory similarity 0.56
Abstract · 16 pages, 7 figures, submitted to IEEE for possible publication

Large-scale antenna arrays are essential to future wireless networks but impose significant hardware and digital-processing burdens. The microwave linear analog computer (MiLAC) offers a promising architecture for addressing these challenges. In a MiLAC, beamforming is realized entirely in the analog domain through a reconfigurable multiport microwave network comprising tunable admittance elements. However, existing studies assume that these elements are continuously tunable, whereas practical implementations can support only finitely many configurable states. This paper investigates finite-resolution MiLAC-aided multiuser beamforming under lossless and reciprocal constraints with prescribed connectivity patterns. Each tunable susceptance is selected from a symmetric uniform finite-resolution codebook. We formulate an online problem that jointly optimizes the discrete susceptances and power allocation for a prescribed codebook, and an offline problem that designs the codebook based on channel statistics. By exploiting the odd-uniform codebook structure, we express each multilevel susceptance as a weighted sum of two-level variables and develop exact continuous penalty models for both the online beamforming and offline codebook design problems. We prove that, for sufficiently large penalty parameters, these penalty models are globally equivalent to their original discrete counterparts. Building on these formulations, we develop efficient ADMM-based algorithms for solving the two problems. Numerical results demonstrate that the performance of an unquantized fully-connected MiLAC can be approached with substantially reduced connectivity and finite resolution. In particular, a 3-bit stem-connected MiLAC achieves more than 95% of the sum-rate performance of the unquantized fully-connected MiLAC while requiring only 22% of its tunable components.

0.42

Massive MIMO ISAC Under Target-Angle Uncertainty: CRLB Outage Analysis and Robust Resource Allocation

eess.SP ·2026-09-16 ·Smriti Uniyal, Tianyu Fang, Van-Dinh Nguyen, Hien Quoc Ngo, Markku Juntti +1 more
similarity 0.56
Abstract

In integrated sensing and communications (ISAC), the same spectral and hardware resources are shared for two functionalities. Most ISAC designs assume perfect target-angle information neglecting angle estimation errors, which introduce steering-vector mismatches, degrade sensing accuracy, and may invalidate deterministic sensing guarantees. This paper investigates monostatic massive multiple-input-multiple-output (MIMO) ISAC systems under imperfect target-angle estimates. We derive closed-form expressions for the Cramér-Rao lower bounds (CRLBs) of target azimuth and elevation estimates in the presence of angle uncertainty. We characterize the cumulative distribution functions and outage probabilities of the CRLBs under Gaussian, generalized uniform, and von Mises angle-error models. Our analysis reveals that, in the small-error regime, the CRLBs increase quadratically with the angle errors due to transmit steering-vector mismatch. To ensure reliable sensing, we propose a robust power allocation framework that jointly optimizes pilot training and communications/sensing transmission powers to maximize the communications sum rate while satisfying CRLB outage constraints. The resulting nonconvex problem is solved using an alternating-optimization algorithm based on successive convex approximation. Numerical results validate the developed analysis and show that the proposed robust design reduces azimuth and elevation CRLB outage probabilities by up to $60\%$ compared with conventional non-robust schemes. It attains up to $45\%$ higher sum rates than the non-robust design under strict CRLB thresholds.

0.20

Conformal Risk-Averse Decision Making with Optimized Certainty Equivalent Risk Control

cs.AI stat.MLcs.ITcs.LG ·2026-08-28 ·Amirmohammad Farzaneh, Osvaldo Simeone
similarity 0.56
Abstract

We study risk-averse decision making, in which an agent selects actions while being uncertain about the true system state. The risk is measured via optimized certainty equivalent (OCE) metrics, which generalize popular criteria such as mean-variance risk and conditional value-at-risk (CVaR). We characterize the optimal policy under known distributions, and show that it reduces to a prediction set-based solution for the CVaR. This provides an operational interpretation of conformal prediction-type prediction sets. For unknown distributions, we develop a data-driven calibration strategy, based on a synthetic model for the likelihood and held-out calibration data, yielding high-probability control of the OCE risk. The approach is evaluated on two wireless beamforming settings.

0.26