CS Paper Radar

Worst-User Outage Probability Minimization in Active RIS-Aided Systems

Donghwan Shin, Hyeongtaek Lee, Junil Choi

cs.IT eess.SP ·submitted 2026-11-01 06:56 UTC · v1
published

Abstract

In this paper, a worst-user outage probability minimization problem in active reconfigurable intelligent surface (RIS)-aided systems is addressed. Since the resulting problem involves a discontinuous objective function over an unknown channel distribution, a sequence of reformulations is applied by integrating a probability-simplex user weighting, a softplus surrogate for differentiability, and entropic tail-risk aggregation for rare but severe outage events. Based on the reformulated problem, a data-driven stochastic optimization technique that relies on historical channel samples is adopted to jointly optimize the beamformer and reflection coefficients with projected adaptive moment estimation. Simulation results show advantages of the proposed technique for reliability-oriented active RIS transmission design.

Comment
5 pages, 2 figures, accepted to IEEE Wireless Communications Letters

Closest papers

Nearest neighbours by meaning across the whole index.

Robust Joint Beamforming and Configuration Design in FARIS-Aided Systems

eess.SP ·2026-08-28 ·Hong-Bae Jeon, Yonghwi Kim, Hyung-Joo Moon, Kai-Kit Wong
similarity 0.61
Abstract

In this paper, we propose a robust transmission design for multi-user systems assisted by a fluid active reconfigurable intelligent surface (FARIS), which enables both active reflection and dynamic port selection and thereby offers enhanced flexibility, under imperfect channel state information (CSI). We formulate a robust minimum sum-rate maximization problem by jointly optimizing the base station beamformer, the utilized FARIS coefficients, and the active element selection, while explicitly accounting for CSI errors and practical power constraints. The resulting problem is inherently nonconvex due to the coupled optimization variables and discrete port-selection structure. To tackle this challenge, we first reformulate the original problem via a weighted minimum mean square error (WMMSE) approach and then devise an alternating optimization (AO) framework, where each resulting subproblem admits efficient solutions and the overall algorithm converges to a stationary point. Simulation results demonstrate that the proposed robust FARIS scheme consistently outperforms conventional designs, highlighting the effectiveness of jointly leveraging degree-of-freedom (DoF) enhancement and active signal amplification under CSI uncertainty.

0.09

Conformal Risk Control for Multiuser Beamforming

eess.SP ·2026-10-03 ·Aman Goel, Sundeep Prabhakar Chepuri
similarity 0.57
Abstract · 5 pages with references on the 5th page

We consider multiuser downlink beamforming with prescribed signal-to-interference-plus-noise ratio (SINR) requirements under imperfect channel state information and a tight transmit power budget. Robust worst-case designs often require tractable channel-error models and may not yield feasible beamformers that meet the power budget. To alleviate these issues, we propose conformal risk control for beamforming (CRCBeam), which combines the classical fixed-point minimum-power beamforming with conformal risk control to calibrate an SINR margin from calibration sample pairs of estimated and true channels. Under exchangeability, CRCBeam provides finite-sample control over served-outage risk, which is the probability of transmitting when at least one user fails to meet its SINR target. CRCBeam requires no parametric channel-error model and transmits only when the power budget is met. Numerical experiments using a pilot contamination channel error model corroborate that CRCBeam achieves the served-outage risk while meeting the power budget. In contrast, worst-case robust baselines, Gaussian-ball and conformal-ball beamforming, either do not meet the target risk or exceed the power budget.

0.28

Robust Resource Management for SAGIN using DNN-Driven Channel Uncertainty Learning

cs.IT ·2026-09-28 ·Haonan Zhang, Weihua Wu, Qi Zhang, Runzi Liu, Zewei Jing +1 more
similarity 0.56
Abstract

This paper focuses on the joint robust beamforming and resource allocation for space-air-ground integrated networks (SAGIN) under uncertain channel state information (CSI). In SAGIN, uncertain CSI undermines the precise adjustment of beamforming and resource allocation, posing a major challenge to meeting heterogeneous users' strict quality of service (QoS) requirements. To address this challenge, we first formulate a chance-constrained optimization problem to minimize the total transmit power while satisfying QoS requirements under a predefined outage probability. By leveraging semidefinite relaxation (SDR), the objective function is transformed into a linear function of the traces of the beamforming matrices. Then, we propose a deep neural network (DNN)-driven channel uncertainty learning to dynamically learn and model the uncertain CSI as an asymmetric uncertainty set. Under the constructed CSI uncertainty set, a robust counterpart method based on pre-trained network parameters is developed. It characterizes the uncertainty set as a finite union of convex sets, thereby providing a tractable approximation for the original chance constraints. Finally, we design an adaptive iterative algorithm to jointly optimize the resource allocation and beamforming vectors. Simulation results show that our proposed DNN-driven method outperforms traditional robust and non-robust methods, achieving a superior energy efficiency and robust reliability in SAGIN.

0.33

A FAS Channel Fitting Strategy Using Extreme Value Distributions for Accurate Outage Performance Evaluation

cs.IT ·2026-10-04 ·Rui Xu, Yinghui Ye, Guangyue Lu, Liqin Shi, Gan Zheng
unusual similarity 0.55
Abstract

Modeling the channel in a single-antenna fluid antenna system (FAS) using extreme value distributions (EVDs) provides an accurate and tractable framework for FAS performance evaluation. When the objective of FAS channel fitting is outage probability (OP) evaluation, accurate characterization of the low-probability left-tail region becomes crucial, while existing fitting strategies that emphasize global fitting accuracy may fail to capture the critical tail behavior required for precise OP evaluation. In this paper, we propose an OP-oriented channel fitting strategy with a left-tail-sensitive target distribution and fitting criterion. Specifically, a combined EVD (CEVD) is introduced as the target distribution, where a generalized Pareto distribution (GPD) is employed to characterize the left tail and a generalized extreme value (GEV) distribution is used to model the global behavior. Furthermore, a modified mean-square-error (MMSE) criterion is developed, which employs logarithmic-domain errors to enhance sensitivity to left-tail discrepancies. Meanwhile, the evaluation points are constructed via uniform discretization on the logarithm of the cumulative distribution function, ensuring uniform sampling across all probability scales. This mitigates the under-representation of tail errors in the overall MMSE, which cannot be effectively addressed by error amplification alone due to the sparsity of tail samples. Simulation results demonstrate that the proposed fitting strategy significantly improves the OP evaluation accuracy in the ultra-low-OP regime.

0.28

A Bussgang-based Latent Lifting Method: Discrete RIS Channel Estimation and Beamforming

eess.SP ·2026-11-07 ·Mintaek Oh, Namyoon Lee, Jinseok Choi
similarity 0.53
Abstract · 13 pages, 8 figures

This paper addresses the challenge of discrete phase-shift optimization in reconfigurable intelligent surface (RIS)-aided multiuser communication systems. Practical RIS hardware often utilizes low-resolution phase shifters, leading to challenging combinatorial optimization problems. To address this challenge, we propose a Bussgang-based latent lifting (BuLL) method that represents discrete phase shifts as quantized outputs of continuous latent variables. Our BuLL method calibrates the Bussgang gain and distortion covariance under a reference distribution and keeps these moments fixed during deterministic latent optimization. These fixed moments are then used to construct a distortion-aware continuous surrogate that incorporates reference-averaged discretization effects without penalty terms. For uplink channel estimation, we develop a matrix quadratic transform-based algorithm to optimize a mean-square-error surrogate. For downlink beamforming, we develop a generalized power iteration-based RIS phase-shift optimization algorithm for a spectral efficiency (SE) surrogate. Numerical results demonstrate improvements in channel estimation accuracy and sum SE over conventional benchmarks in the evaluated low-resolution RIS settings.

0.34

Distributionally Robust Linearly Constrained Minimum Variance Beamforming Under Steering-Vector Mismatch

eess.SP ·2026-09-15 ·Raneem Madani, Abdel Lisser, Zeno Toffano
code/data similarity 0.53
Abstract

Linearly constrained minimum variance (LCMV) beamforming is a fundamental technique for controlling the array response toward multiple desired signals while suppressing interference and noise. In practical systems, however, the steering vectors involved in the response constraints are often affected by direction-of-arrival errors, calibration imperfections, and other array uncertainties. Such mismatches may cause constraint violations and substantial performance degradation. This paper investigates multi-signal LCMV beamforming under steering-vector mismatch and develops probabilistic constraints to guarantee a prescribed reliability level for each desired signal. Several uncertainty-information settings are considered. When the exact mismatch distribution is known and belongs to the class of complex elliptically symmetric distributions (CES), a distribution-informed convex safe reformulation is derived using exact CES quantiles. When the mismatch distribution is unknown, and only partial statistical information or empirical data is available, robust probabilistic reformulations are developed under moment-based ambiguity, support-based uncertainty, and Wasserstein data-driven ambiguity, and the resulting deterministic formulations can be expressed as convex second-order cone programs. Numerical experiments show that the proposed designs improve out-of-sample reliability and reduce beam-gain sensitivity to steering-vector mismatch, while maintaining competitive output signal-to-interference-plus-noise (SINR) ratio and robust beampatterns.

0.36

Reliability-Constrained Hybrid Beamforming for Multistatic ISAC in Vehicular Networks

eess.SY ·2026-08-17 ·Congcong Liu, Junhui Zhao, Xiaoming Wang, Dongming Wang
similarity 0.53
Abstract · 4 pages, 3 figures

This letter investigates reliability constrained hybrid beamforming for transceiver separated multistatic integrated sensing and communication in vehicular networks. A target position Cramer Rao bound minimization problem is formulated under outage probability, transmit-power, and analog constant modulus constraints. To handle the constrained non convex problem, we develop a proportional-integral Lagrangian proximal policy optimization algorithm. Simulation results show that the proposed algorithm keeps the average outage probability at or below the reliability threshold, around 8%-10%, improves constraint satisfaction, and achieves stable sensing performance.

0.25

Joint Beamforming for Continuous Transmissive RIS-Enabled Multiuser Communications

cs.IT ·2026-10-06 ·Beining Han, Shumeng Zhang, Deyou Zhang, Qingchao Li, Jun Liu +1 more
similarity 0.53
Abstract

This paper studies continuous transmissive reconfigurable intelligent surface (CT-RIS)-enabled multiuser downlink communications, where passive beamforming is characterized by a phase function defined over the continuous aperture. We employ a distance-dependent spherical-wave model for the base station (BS)-to-CT-RIS link and introduce a finite-path model based on field-response vectors for the CT-RIS-to-user links. The resulting weighted sum rate maximization problem jointly optimizes the finite-dimensional BS precoders and the infinite-dimensional CT-RIS phase function, giving rise to a mixed finite- and infinite-dimensional non-convex optimization problem. To address this problem, we develop an alternating optimization algorithm that combines a closed-form BS precoder update with a functional phase update derived using the calculus of variations and minorization-maximization. Numerical results demonstrate that the proposed CT-RIS consistently outperforms the considered benchmarks, with the performance gains attributed to spatially continuous phase control and a larger effective receiving area.

0.24