CS Paper Radar

Distributed Cascade Force Control of Soft-Tactile-Based Multi-robot System for Object Transportation

Duy Anh Nguyen, Nhat Minh Dinh Le, Nhan Huu Nguyen, Pham Duy Hung, Van Anh Ho, Trung Dung Ngo

cs.RO eess.SY ·submitted 2026-10-03 21:30 UTC · v1
published

Abstract

In this paper, we present a distributed cascade force control system (DCFC) for multiple robots with the aim of pushing a rigid object towards a desired moving target without their inter-robot communication. These mobile robots are equipped with 360-degree vision-based soft tactile sensors utilized to determine contact location and resultant impact force. By investigating the dynamics of moving rigid objects on the flat, we proposed a distributed cascade control. The inner loop control incorporates contact force and positioning, ensuring the robots' pushing contact and application of the desired force to the object. The outer loop control coordinates the robots to push the object in a desired direction without inter-robot communication, regardless of the unknown object mass. The stability and convergence of the system are verified using the Lyapunov stability theory. We also conducted simulation and real-word experiments to validate the performance of the proposed control method, and the experimental results showcase the successful coordination of multiple robots in pushing an object towards a moving desired direction.

Comment
6 pages, 7 figures. Published in the 2024 IEEE/SICE International Symposium on System Integration (SII)
Journal ref
2024 IEEE/SICE International Symposium on System Integration (SII), pp. 398-403, 2024
DOI
10.1109/SII58957.2024.10417390

Closest papers

Nearest neighbours by meaning across the whole index.

DNPush: Distributed Nonparallel Pushing Force Control of Multi-Robot Systems for Object Transportation

cs.RO eess.SY ·2026-10-03 ·Duy Anh Nguyen, Pham Duy Hung, Trung Dung Ngo
similarity 0.71
Abstract · 8 pages, 8 figures. Submitted to IEEE Robotics and Automation Letters

This letter proposes DNPush, a Distributed Nonparallel Pushing force controller for cooperative object transport without inter-robot communication. Each robot uses local force measurements, a preassigned force weight, and a locally expressed desired transport direction, without requiring an object model, contact locations, a CoM estimate, or moment arm magnitudes online. DNPush regulates nonparallel force magnitudes from local force direction misalignments through a reciprocal-sine law. Under the stated contact conditions, Lyapunov analysis with LaSalle's invariance principle proves convergence to a unique rotational equilibrium, where perpendicular force contributions cancel and the net torque from normal forces is zero. Object velocity converges to the desired transport direction, and suitable contact regions exist for convex polygons. Simulations isolate the reciprocal-sine scaling mechanism, five-robot coordination, and active rotational damping. Hardware experiments with soft tactile differential-drive robots achieve a velocity direction error of 0.61 deg +/- 0.79 deg over five trials with a fixed transport direction and demonstrate object transport through waypoints with three robots.

0.29

Force-Closure Condition for Cooperative Multi-robot Pushing of Rectangular Objects

cs.RO eess.SY ·2026-11-09 ·Duy Anh Nguyen, Trung Dung Ngo
published similarity 0.64
Abstract · 7 pages, 7 figures, 2 tables. Published in CAOS 2026

In cooperative object manipulation, the placement of pushing contacts determines whether force closure can be achieved and agents can generate arbitrary forces and torques on the object correspondingly. This study derives a necessary and sufficient closed-form condition for the planar force closure of a rectangular object, a common object shape in everyday settings, under four frictionless pushing contacts. For a rectangle of length $b$ and width $a$, force closure holds if and only if $(l_1+l_3-b)(l_2+l_4-a)<0$, where $l_1,l_2,l_3,l_4$ are the four edge contact locations. This condition is independent of the object's center of mass and is used to verify contact configurations before contact force allocation. When the condition is not satisfied, the signs of the two factors indicate which opposing contact pair should be adjusted. The condition and adjustment rule are then integrated into a full-pose trajectory-tracking framework as a geometric feasibility layer to demonstrate their use in control. Static wrench feasibility tests validate the proposed condition, while narrow-passage floating-body simulations show that maintaining a force-closure configuration reduces the RMS tracking errors in $x$, $y$, and unwrapped yaw from $12.05$ m, $18.11$ m, and $535.96^\circ$ to $2.24$ m, $2.66$ m, and $2.69^\circ$, respectively.

0.36

Cooperative Transport of Unknown Objects by Distributed Effort Regulation in Multi-agent Systems

cs.RO cs.MA ·2026-11-15 ·Tamzidul Mina, Shyam S. Kannan, Wonse Jo, Shaocheng Luo, Galen B. King +1 more
similarity 0.63
Abstract · 9 pages, 12 figures; supplementary video available at https://youtu.be/C2usYt0xzl8; submitted to ICRA 2027

A distributed multi-robot object transportation strategy is proposed for objects of unknown shape, size, geometry, mass and mass distribution without any prior knowledge about the object or number of robots involved in the transportation process. Robots follow the boundary of the object and dynamically determine viable pushing points. A novel object-model-free heading-error-driven pushing effort regulation method is proposed to promote goal-directed object motion; robots regulate their pushing effort using individual and collective heading errors. Robots dynamically relocate around the object boundary if a pushing point is lost or the required pushing effort exceeds its capability to correct its heading. The proposed method is validated using simple and complex shapes with convex and non-convex boundary regions and dynamically changing weight distribution of objects. Detailed analysis on the effects of robot distribution and initial object pose on the transportation performance in terms of required time and path efficiency is also presented. Scalability analysis revealed that object transportation time is dependent on the number of pushing surfaces available which in turn depends on the object size, shape, and set inter-robot safety distance. The proposed system yielded highly efficient object paths with consistent elapsed transport times over several trials robust to external disturbances such as non-uniform friction between contacting surfaces and robot wheel slip.

0.33

Compact Force Sensor for Dual-UAV Cable-Suspended Payload Transport with Tension-Aware Outer-Loop Control

cs.RO ·2026-09-25 ·Andrea Delbene, Giorgio Cannata, Giorgio Carlini, Filippo Sante, Marco Baglietto
top venue similarity 0.59
Abstract · Preprint version for IEEE Robotics and Automation Letters, link to article: https://ieeexplore.ieee.org/document/11743837

Cooperative payload transportation using multiple Unmanned Aerial Vehicles (UAVs) poses challenges in stability, coordination, and robustness, especially under external disturbances and unmodeled dynamics. This work proposes a dual-UAV payload transportation framework supported by a compact, custom-designed force sensor measuring the interaction force at the UAV cable anchor point. The sensor design and mathematical model are presented, and its performance is characterized through static and dynamic tests evaluating linearity, hysteresis, repeatability, and crossload. The control architecture follows a cascade structure: fast inner loops handle vehicle stabilization, while outer loops are designed to compensate for the measured forces. The approach is validated through simulations and indoor experiments under position uncertainty. Payload-drop and constrained-space tests assess the proposed sensing and control architecture against literature-based distributed references, showing improved stabilization, coordination, and disturbance rejection. A video of the experiments is available at: https://youtu.be/rIw9-fvV8Qw.

0.47

Grasping and Stabilizing Tumbling Objects with Rotating-Base Multi-Arm Space Manipulators

cs.RO eess.SY ·2026-11-03 ·Farhad Aghili
top venue similarity 0.59
Abstract

This paper presents an innovative guidance and control method for a space manipulator that actively maneuvers its base to hold a tumbling object stationary relative to the base during proximity operations. This simplifies motion planning, reduces collision risk, and enables impact-free capture using single- or multi-arm configurations, with or without predefined grasping interfaces. The proposed approach involves two phases. In the pre-grasping phase, a synchronization control aligns the target's center of mass (CoM) with the system's instantaneous center of rotation (ICR), virtually rigidizing the target-servicer system to keep the object stationary for reliable grasping. In the post grasping phase, a control strategy based on Hamiltonian dynamics and optimal control stabilizes the combined system by minimizing time, fuel, or energy, while respecting base torque limits and multiple grasping constraints. For structured targets, applied forces and torques stay within their bounds; for unstructured ones, friction constraints prevent slipping. A case study demonstrates the method's effectiveness in enabling both the subsequent grasping and detumbling phases.

0.36

Real-Time Shape Control of Multi-Segment Soft Robotic Arms Using Koopman Operators with Global and Local Observables

cs.RO eess.SY ·2026-09-02 ·Jiahe Wang, Eron Ristich, Sultan Haidar Ali, Eric weissman, Lei Zhang +3 more
similarity 0.56
Abstract · 18 pages, 14 figures, submitted to TRO

Multi-segment soft robotic arms can continuously reconfigure their body shapes for safe interaction, but tip control alone is insufficient for constrained-space tasks. Therefore, shape control is a more important task for multi-segment soft arms than tip control, but remains challenging due to the high dimensionality and nonlinear dynamics of continuum deformation. In existing work, shape control accuracy is defined by the error in the global frame (global shape error). For multi-segment soft arms, using only global shape error as the control objective is insufficient, as segment coupling, gravity-induced loading, and inertial effects become more significant. This difficulty increases with the number of segments. In this paper, we present a Koopman-based model predictive control framework that combines global and local observables, enabling real-time shape control on multi-segment soft robotic arms. The framework is evaluated through numerical and physical experiments. Numerical experiments demonstrate the scalability of the proposed controller by achieving shape control on robots with up to 10 independently actuated segments. The physical experiments demonstrate that the controller is capable of (1) real-time shape control of 3- and 5-segment robotic arms with tip speeds up to 0.6 m/s, (2) robust tracking without retraining, including distal payloads up to 400~g and recovery from a 7~N lateral disturbance, and (3) the potential for future inspection applications through a confined-space demonstration. These results demonstrate that the proposed framework enables dynamic, scalable, and accurate real-time shape control on multi-segment soft robotic arms.

0.35

Safe Multi-Robot Collaborative Transport Using Density Functions

cs.RO ·2026-10-06 ·Jagannath Prasad Sahoo, Sriram S. K. S. Narayanan, Umesh Vaidya
code/datahot direction similarity 0.55
Abstract

This paper presents a hierarchical density-based model predictive control framework for safe collaborative manipulation by multiple quadrupedal robots. The framework enables a team of robots to push a shared object to a desired pose using only the initial and goal poses, without requiring a precomputed reference trajectory. A centralized box-level MPC optimizes contact forces while enforcing a control-density constraint for goal convergence and obstacle avoidance. Each robot then solves its own distributed robot-level whole-body MPC, under a stated shared-information assumption, to track its moving contact location while accounting for static obstacles and the time-varying positions of neighboring robots. The approach is evaluated in MuJoCo using whole-body contact dynamics for two and three Unitree Go2 quadrupeds collaboratively pushing rigid objects through narrow passages. Comparisons with matched Control Barrier Function and RRT* based tracking baselines demonstrate the effectiveness of the proposed density-based formulation for push-only, force- and torque-coupled manipulation tasks. Implementation videos are available at https://jaggu2606.github.io/go2-density-mpc-pushing/

0.44

Haptic Shared Control for Multi-Robot Systems

cs.RO cs.HCcs.MA ·2026-11-03 ·Maxime Bernard
similarity 0.55
Abstract · PhD thesis, Université de Rennes (IRISA UMR 6074 / Inria Rennes), defended 30 April 2025. 134 pages, 38 figures

Multi-agent systems offer significant advantages in terms of flexibility and redundancy, enabling the efficient distribution of complex tasks among multiple robots. However, their deployment requires advanced control strategies to ensure optimal cooperation between autonomous agents and human operators. We propose a modification of the global connectivity maintenance algorithm to incorporate measurements taken in agent's local frame, using sensors with limited fields of view. This algorithm, responsible for the autonomous behavior of the multi-robot system, is combined with different adaptive supervision strategies, allowing the user to exert control at varying scales over the entire group. (i) Single Agent Control (S): The operator directly controls a single robot, (ii) Pinning Control (P): The operator imposes constraints on multiple robots to influence the group, (iii) Centroid Control (C): The operator acts on the system's center of mass to steer the entire fleet. In conjunction with the connectivity maintenance algorithm, these methods ensure compliance with inter-agent constraints while providing haptic feedback to the user regarding the system's connectivity state. The effectiveness of these approaches was evaluated through a user study, comparing performance with and without haptic feedback across multiple scenarios tailored to the different control modes.

0.38