CS Paper Radar

Force-Closure Condition for Cooperative Multi-robot Pushing of Rectangular Objects

Duy Anh Nguyen, Trung Dung Ngo

cs.RO eess.SY ·submitted 2026-11-09 21:34 UTC · v1
published

Abstract

In cooperative object manipulation, the placement of pushing contacts determines whether force closure can be achieved and agents can generate arbitrary forces and torques on the object correspondingly. This study derives a necessary and sufficient closed-form condition for the planar force closure of a rectangular object, a common object shape in everyday settings, under four frictionless pushing contacts. For a rectangle of length $b$ and width $a$, force closure holds if and only if $(l_1+l_3-b)(l_2+l_4-a)<0$, where $l_1,l_2,l_3,l_4$ are the four edge contact locations. This condition is independent of the object's center of mass and is used to verify contact configurations before contact force allocation. When the condition is not satisfied, the signs of the two factors indicate which opposing contact pair should be adjusted. The condition and adjustment rule are then integrated into a full-pose trajectory-tracking framework as a geometric feasibility layer to demonstrate their use in control. Static wrench feasibility tests validate the proposed condition, while narrow-passage floating-body simulations show that maintaining a force-closure configuration reduces the RMS tracking errors in $x$, $y$, and unwrapped yaw from $12.05$ m, $18.11$ m, and $535.96^\circ$ to $2.24$ m, $2.66$ m, and $2.69^\circ$, respectively.

Comment
7 pages, 7 figures, 2 tables. Published in CAOS 2026
Journal ref
2026 IEEE Canadian Atlantic Ocean Symposium (CAOS), pp. 165-170, 2026
DOI
10.1109/CAOS69069.2026.11665860

Closest papers

Nearest neighbours by meaning across the whole index.

DNPush: Distributed Nonparallel Pushing Force Control of Multi-Robot Systems for Object Transportation

cs.RO eess.SY ·2026-10-03 ·Duy Anh Nguyen, Pham Duy Hung, Trung Dung Ngo
similarity 0.68
Abstract · 8 pages, 8 figures. Submitted to IEEE Robotics and Automation Letters

This letter proposes DNPush, a Distributed Nonparallel Pushing force controller for cooperative object transport without inter-robot communication. Each robot uses local force measurements, a preassigned force weight, and a locally expressed desired transport direction, without requiring an object model, contact locations, a CoM estimate, or moment arm magnitudes online. DNPush regulates nonparallel force magnitudes from local force direction misalignments through a reciprocal-sine law. Under the stated contact conditions, Lyapunov analysis with LaSalle's invariance principle proves convergence to a unique rotational equilibrium, where perpendicular force contributions cancel and the net torque from normal forces is zero. Object velocity converges to the desired transport direction, and suitable contact regions exist for convex polygons. Simulations isolate the reciprocal-sine scaling mechanism, five-robot coordination, and active rotational damping. Hardware experiments with soft tactile differential-drive robots achieve a velocity direction error of 0.61 deg +/- 0.79 deg over five trials with a fixed transport direction and demonstrate object transport through waypoints with three robots.

0.29

Cooperative Transport of Unknown Objects by Distributed Effort Regulation in Multi-agent Systems

cs.RO cs.MA ·2026-11-15 ·Tamzidul Mina, Shyam S. Kannan, Wonse Jo, Shaocheng Luo, Galen B. King +1 more
similarity 0.66
Abstract · 9 pages, 12 figures; supplementary video available at https://youtu.be/C2usYt0xzl8; submitted to ICRA 2027

A distributed multi-robot object transportation strategy is proposed for objects of unknown shape, size, geometry, mass and mass distribution without any prior knowledge about the object or number of robots involved in the transportation process. Robots follow the boundary of the object and dynamically determine viable pushing points. A novel object-model-free heading-error-driven pushing effort regulation method is proposed to promote goal-directed object motion; robots regulate their pushing effort using individual and collective heading errors. Robots dynamically relocate around the object boundary if a pushing point is lost or the required pushing effort exceeds its capability to correct its heading. The proposed method is validated using simple and complex shapes with convex and non-convex boundary regions and dynamically changing weight distribution of objects. Detailed analysis on the effects of robot distribution and initial object pose on the transportation performance in terms of required time and path efficiency is also presented. Scalability analysis revealed that object transportation time is dependent on the number of pushing surfaces available which in turn depends on the object size, shape, and set inter-robot safety distance. The proposed system yielded highly efficient object paths with consistent elapsed transport times over several trials robust to external disturbances such as non-uniform friction between contacting surfaces and robot wheel slip.

0.33

Grasping and Stabilizing Tumbling Objects with Rotating-Base Multi-Arm Space Manipulators

cs.RO eess.SY ·2026-11-03 ·Farhad Aghili
top venue similarity 0.66
Abstract

This paper presents an innovative guidance and control method for a space manipulator that actively maneuvers its base to hold a tumbling object stationary relative to the base during proximity operations. This simplifies motion planning, reduces collision risk, and enables impact-free capture using single- or multi-arm configurations, with or without predefined grasping interfaces. The proposed approach involves two phases. In the pre-grasping phase, a synchronization control aligns the target's center of mass (CoM) with the system's instantaneous center of rotation (ICR), virtually rigidizing the target-servicer system to keep the object stationary for reliable grasping. In the post grasping phase, a control strategy based on Hamiltonian dynamics and optimal control stabilizes the combined system by minimizing time, fuel, or energy, while respecting base torque limits and multiple grasping constraints. For structured targets, applied forces and torques stay within their bounds; for unstructured ones, friction constraints prevent slipping. A case study demonstrates the method's effectiveness in enabling both the subsequent grasping and detumbling phases.

0.36

Relative Contact Velocity-Controlled Hand-Object Mechanism for Dexterous Tool Manipulation

cs.RO ·2026-09-22 ·Sunyu Wang, Jean Oh, Nancy S. Pollard
hot direction similarity 0.65
Abstract

This work investigates how to enable general multi-finger robotic hands to perform the complete tool manipulation process, which entails picking up a tool, loading it into a suitable pose, and then wielding it. Inspired by human tool manipulation and mechanical design principles, we model the hand and the tool as a unified hand-object mechanism (HOM) composed of sub-assemblies. Specifically, we define a HOM as consisting of the hand, the object, and the generalized contact frames, allowing the HOM's motions to be expressed with the same set of Cartesian-space relative contact velocities, irrespective of the hand's kinematics and geometry. Then, we define a HOM's sub-assemblies as relative contact velocity and contact force constraints between fingers. Building on these definitions, we developed a lightweight and physically interpretable motion planning and contact estimation framework using least squares and a complementary filter. We evaluated our framework in simulation by teleoperating five different robotic hands. The results show that our framework enabled all five hands to execute the complete tool manipulation process, achieving dexterous behaviors even from identical, simple reference trajectories. Furthermore, the results showcase our framework's adaptability to different hands, tools, and tasks, enabled by its kinematic and geometric foundation. Please visit website for videos: \href{https://sunyuw.github.io/hom-sim/}{https://sunyuw.github.io/hom-sim/}

0.33

Safe Multi-Robot Collaborative Transport Using Density Functions

cs.RO ·2026-10-06 ·Jagannath Prasad Sahoo, Sriram S. K. S. Narayanan, Umesh Vaidya
code/datahot direction similarity 0.65
Abstract

This paper presents a hierarchical density-based model predictive control framework for safe collaborative manipulation by multiple quadrupedal robots. The framework enables a team of robots to push a shared object to a desired pose using only the initial and goal poses, without requiring a precomputed reference trajectory. A centralized box-level MPC optimizes contact forces while enforcing a control-density constraint for goal convergence and obstacle avoidance. Each robot then solves its own distributed robot-level whole-body MPC, under a stated shared-information assumption, to track its moving contact location while accounting for static obstacles and the time-varying positions of neighboring robots. The approach is evaluated in MuJoCo using whole-body contact dynamics for two and three Unitree Go2 quadrupeds collaboratively pushing rigid objects through narrow passages. Comparisons with matched Control Barrier Function and RRT* based tracking baselines demonstrate the effectiveness of the proposed density-based formulation for push-only, force- and torque-coupled manipulation tasks. Implementation videos are available at https://jaggu2606.github.io/go2-density-mpc-pushing/

0.44

Distributed Cascade Force Control of Soft-Tactile-Based Multi-robot System for Object Transportation

cs.RO eess.SY ·2026-10-03 ·Duy Anh Nguyen, Nhat Minh Dinh Le, Nhan Huu Nguyen, Pham Duy Hung, Van Anh Ho +1 more
published similarity 0.64
Abstract · 6 pages, 7 figures. Published in the 2024 IEEE/SICE International Symposium on System Integration (SII)

In this paper, we present a distributed cascade force control system (DCFC) for multiple robots with the aim of pushing a rigid object towards a desired moving target without their inter-robot communication. These mobile robots are equipped with 360-degree vision-based soft tactile sensors utilized to determine contact location and resultant impact force. By investigating the dynamics of moving rigid objects on the flat, we proposed a distributed cascade control. The inner loop control incorporates contact force and positioning, ensuring the robots' pushing contact and application of the desired force to the object. The outer loop control coordinates the robots to push the object in a desired direction without inter-robot communication, regardless of the unknown object mass. The stability and convergence of the system are verified using the Lyapunov stability theory. We also conducted simulation and real-word experiments to validate the performance of the proposed control method, and the experimental results showcase the successful coordination of multiple robots in pushing an object towards a moving desired direction.

0.64

Simultaneous Force and Motion Control in Generalised Coordinates

cs.RO ·2026-10-16 ·Jon Woolfrey
similarity 0.63
Abstract · 8 pages, 5 figures, submitted to IEEE International Conference on Robotics and Automation (ICRA) 2027

Robot manipulators often come into contact with rigid objects when performing work. This imposes physical constraints on their motion. Simultaneous force & motion control was developed to regulate contact forces commensurate with these constraints, whilst projecting motion control in to the orthogonal, unconstrained directions. This is typically formulated in the task coordinates, i.e. operational space, then mapped to joint torques to command the robot. However, most constraints on the robot control, such as joint limits, collision avoidance, singularity avoidance, etc. are naturally expressed in generalised coordinates (joint space). Thus, formulating the control problem in task space makes it difficult to guarantee control feasibility. In this paper Gauss' principle of least constraint is used to solve the control as a quadratic programming (QP) problem in generalised coordinates. It is shown that the theoretical solution to this problem produces the correct constrained dynamics for accurate contact force control. Moreover, inequality constraints may be appended to ensure feasibility and safety. Simulation results were conducted in MuJoCo and compared to the operational space formulation. The proposed method is able to simultaneously maintain a desired contact force, minimise trajectory tracking error, and adhere to practical inequality constraints.

0.19

Residual Wrench Certification and Margin-Aware Control Synthesis for Aerial Physical Interaction

cs.RO eess.SY ·2026-09-30 ·Abhimanyu Khadga, Abhinav Sinha, Shashi Ranjan Kumar
similarity 0.63
Abstract

We develop a task-relative framework for certifying residual wrench authority after hover and contact loading in multirotors with bounded actuators. Using convex geometry, we derive signed margins for prescribed convex reserves, including Euclidean balls and weighted ellipsoids. We obtain computable reserve certificates from actuator-interiority bounds to support slack-maximizing allocation. To preserve the required reserve, we propose command projection onto a tightened feasible set. We then connect the available reserve to structured gain synthesis and certify a local tracking region that respects actuator limits. Within this region, we establish nominal exponential convergence and robust ultimate boundedness. For the prescribed task and morphology family, we show that the optimized octarotor attains a larger margin than the optimized hexarotor at equal total thrust. We evaluate the proposed framework in closed-loop simulations of sustained rigid-wall contact using a fixed-geometry octarotor and a variable-tilt quadrotor with matched installed thrust. The quadrotor's local certificate admits a higher normalized push limit for the prescribed task family. In tests beyond the realizability boundaries, we observe the predicted loss of authority through rotor-thrust limits for the octarotor and tilt-servo limits for the quadrotor.

0.17