CS Paper Radar

Grasping and Stabilizing Tumbling Objects with Rotating-Base Multi-Arm Space Manipulators

Farhad Aghili

cs.RO eess.SY ·submitted 2026-11-03 02:07 UTC · v1
top venue

Abstract

This paper presents an innovative guidance and control method for a space manipulator that actively maneuvers its base to hold a tumbling object stationary relative to the base during proximity operations. This simplifies motion planning, reduces collision risk, and enables impact-free capture using single- or multi-arm configurations, with or without predefined grasping interfaces. The proposed approach involves two phases. In the pre-grasping phase, a synchronization control aligns the target's center of mass (CoM) with the system's instantaneous center of rotation (ICR), virtually rigidizing the target-servicer system to keep the object stationary for reliable grasping. In the post grasping phase, a control strategy based on Hamiltonian dynamics and optimal control stabilizes the combined system by minimizing time, fuel, or energy, while respecting base torque limits and multiple grasping constraints. For structured targets, applied forces and torques stay within their bounds; for unstructured ones, friction constraints prevent slipping. A case study demonstrates the method's effectiveness in enabling both the subsequent grasping and detumbling phases.

Journal ref
IEEE Transactions on Robotics, 2006
DOI
10.1109/TRO.2026.3723957

Closest papers

Nearest neighbours by meaning across the whole index.

Force-Closure Condition for Cooperative Multi-robot Pushing of Rectangular Objects

cs.RO eess.SY ·2026-11-09 ·Duy Anh Nguyen, Trung Dung Ngo
published similarity 0.66
Abstract · 7 pages, 7 figures, 2 tables. Published in CAOS 2026

In cooperative object manipulation, the placement of pushing contacts determines whether force closure can be achieved and agents can generate arbitrary forces and torques on the object correspondingly. This study derives a necessary and sufficient closed-form condition for the planar force closure of a rectangular object, a common object shape in everyday settings, under four frictionless pushing contacts. For a rectangle of length $b$ and width $a$, force closure holds if and only if $(l_1+l_3-b)(l_2+l_4-a)<0$, where $l_1,l_2,l_3,l_4$ are the four edge contact locations. This condition is independent of the object's center of mass and is used to verify contact configurations before contact force allocation. When the condition is not satisfied, the signs of the two factors indicate which opposing contact pair should be adjusted. The condition and adjustment rule are then integrated into a full-pose trajectory-tracking framework as a geometric feasibility layer to demonstrate their use in control. Static wrench feasibility tests validate the proposed condition, while narrow-passage floating-body simulations show that maintaining a force-closure configuration reduces the RMS tracking errors in $x$, $y$, and unwrapped yaw from $12.05$ m, $18.11$ m, and $535.96^\circ$ to $2.24$ m, $2.66$ m, and $2.69^\circ$, respectively.

0.36

Simultaneous Force and Motion Control in Generalised Coordinates

cs.RO ·2026-10-16 ·Jon Woolfrey
similarity 0.64
Abstract · 8 pages, 5 figures, submitted to IEEE International Conference on Robotics and Automation (ICRA) 2027

Robot manipulators often come into contact with rigid objects when performing work. This imposes physical constraints on their motion. Simultaneous force & motion control was developed to regulate contact forces commensurate with these constraints, whilst projecting motion control in to the orthogonal, unconstrained directions. This is typically formulated in the task coordinates, i.e. operational space, then mapped to joint torques to command the robot. However, most constraints on the robot control, such as joint limits, collision avoidance, singularity avoidance, etc. are naturally expressed in generalised coordinates (joint space). Thus, formulating the control problem in task space makes it difficult to guarantee control feasibility. In this paper Gauss' principle of least constraint is used to solve the control as a quadratic programming (QP) problem in generalised coordinates. It is shown that the theoretical solution to this problem produces the correct constrained dynamics for accurate contact force control. Moreover, inequality constraints may be appended to ensure feasibility and safety. Simulation results were conducted in MuJoCo and compared to the operational space formulation. The proposed method is able to simultaneously maintain a desired contact force, minimise trajectory tracking error, and adhere to practical inequality constraints.

0.19

Residual Wrench Certification and Margin-Aware Control Synthesis for Aerial Physical Interaction

cs.RO eess.SY ·2026-09-30 ·Abhimanyu Khadga, Abhinav Sinha, Shashi Ranjan Kumar
similarity 0.63
Abstract

We develop a task-relative framework for certifying residual wrench authority after hover and contact loading in multirotors with bounded actuators. Using convex geometry, we derive signed margins for prescribed convex reserves, including Euclidean balls and weighted ellipsoids. We obtain computable reserve certificates from actuator-interiority bounds to support slack-maximizing allocation. To preserve the required reserve, we propose command projection onto a tightened feasible set. We then connect the available reserve to structured gain synthesis and certify a local tracking region that respects actuator limits. Within this region, we establish nominal exponential convergence and robust ultimate boundedness. For the prescribed task and morphology family, we show that the optimized octarotor attains a larger margin than the optimized hexarotor at equal total thrust. We evaluate the proposed framework in closed-loop simulations of sustained rigid-wall contact using a fixed-geometry octarotor and a variable-tilt quadrotor with matched installed thrust. The quadrotor's local certificate admits a higher normalized push limit for the prescribed task family. In tests beyond the realizability boundaries, we observe the predicted loss of authority through rotor-thrust limits for the octarotor and tilt-servo limits for the quadrotor.

0.17

Fast Planning for Multi-object Multi-target Throwing

cs.RO eess.SY ·2026-10-06 ·Zhengming Zhu, Yang Liu, Xiao Gao, Aude Billard
published similarity 0.63
Abstract · Accepted to IROS 2026. 8 pages, 9 figures. Zhengming Zhu and Yang Liu contributed equally. Video Summary: https://liuyangdh.github.io/momt-v…

Robot throwing has emerged as a promising technique for improving efficiency in logistics and warehouse automation, by enlarging the workspace and speeding up the process. To significantly increase the throwing system's throughput, we develop strategies for throwing multiple objects in one swipe. Such multi-object multi-target throwing (MOMT) leverages the large degrees of freedom of anthropomorphic hands. The key is to quickly generate fast and feasible throwing motions, which involves a complex trade-off between short trajectory duration and short planning time. We solve this problem in two stages. Offline, we build a model of the feasible set by combining object's inverted flying dynamics and the robot's kinematics and dynamics. Online, we generate feasible throws through fast solution matching and filtering of object's valid detach state and robot's feasible state that can compose sequences of throws in less than 5 ms. We validate the framework on a 7-DoF manipulator equipped with a multi-fingered hand. In simulation, coordinated two-object throwing reduces execution time by up to 46% compared to independent single-object planning, and this improvement is maintained when scaling to three objects. Real-world experiments with two objects confirm a 29% reduction; the remaining gap to the theoretical 50% is attributed to inter-throw transition overhead. When target positions are randomly changed mid-execution, the system re-plans and successfully reaches the new targets within 100 ms latency without stopping the robot. These results establish the first unified planning framework for MOMT throwing -- demonstrating scalability to multiple objects in simulation and real-world feasibility on two-object tasks -- advancing the frontier of high-throughput robotic manipulation. A video summarizing the method and the hardware experiments is available at https://liuyangdh.github.io/momt-video

0.50

Coordinated Motion Planning for Multi-Arm Systems via Iterative LQ Games

cs.RO ·2026-08-27 ·Junyoung Kim, Hanwen Ren, Lei Zhang, Ahmed H. Qureshi
similarity 0.61
Abstract

Multi-agent motion planning for high-degree-of-freedom robotics manipulators in shared workspaces remains a fundamental yet challenging problem. Centralized planners often suffer from poor scalability, while decentralized approaches face robustness and safety concerns. Game-theoretic formulations offer a promising approach for modeling agent interactions, potentially overcoming these limitations. However, their application to articulated multi-arm systems remains limited. This paper presents an iterative Linear Quadratic (LQ) game framework for multi-manipulator motion planning, where each manipulator is modeled as an independent agent optimizing its own objective while interacting with other agents based on shared global states and collision constraints. The method solves a series of local LQ games by linearizing the dynamics and approximating the cost around a nominal trajectory, with Riccati backward recursions yielding feedback Nash strategies. To address the challenges of articulated systems, we incorporate differentiable penalties for self-collision and inter-arm collision into the optimization pipeline, enabling coordinated, collision-aware trajectory generation. Experiments demonstrate that our framework produces smooth, safe, and efficient trajectories in high-dimensional settings, outperforming traditional methods. This highlights the effectiveness of differential game formulations for multi-robot manipulation.

0.25

FORTE: Task-Adaptive Force Capability Optimization for Mobile Manipulators

cs.RO ·2026-09-18 ·Xiao Wang, Heng Zhang, Gokhan Solak, Fei Zhao, Arash Ajoudani
code/data similarity 0.61
Abstract

Effective physical interaction control in robotic manipulation requires not only kinematically feasible motion but also sufficient force-interaction capability. Existing redundancy resolution methods often ignore task-specific force demands or maximize the force capability indiscriminately, sacrificing dexterity when large force margins are unnecessary. We propose a task-oriented force capability optimization framework for redundant mobile manipulators. A Vision-Language Model (VLM) infers object physical properties from an RGB image and a task description, generating a desired task-force sequence that captures gravitational and inertial demands. We then define a task-oriented force capability metric as the signed distance between a task-force uncertainty ball and the dynamic residual force polytope (RFP), quantifying compatibility between task demands and the robot's remaining actuation capacity. This metric is incorporated, alongside manipulability, joint-limit avoidance, trajectory smoothness, and base-oscillation suppression, into a whole-body multi-objective trajectory-optimization problem. Experiments on a mobile manipulator performing lifting and single-point-holding tasks under varying payload conditions demonstrate that the proposed method provides sufficient force capability for heavy loads while preserving high manipulability for light loads. This yields a task-adaptive balance that fixed capability-maximizing baselines (RFP inscribed radius, RFP cone) and manipulability-only optimization fail to achieve. The core implementation is publicly available at https://github.com/yeying256/FORTE.

0.42

Keeping Contact: Task-Adaptive Friction Margins for Bimanual Non-Prehensile Manipulation

cs.RO ·2026-10-27 ·Qian Ying Lee, Lin Yang, Domenico Campolo
top venuecode/data similarity 0.61
Abstract · Accepted for publication in IEEE Robotics and Automation Letters (RA-L)

Maintaining contact in non-prehensile manipulation requires more than nominal friction cone feasibility: a force barely inside the cone and one well inside it are both feasible, but they provide different margins against slip and contact loss. This paper uses signed friction distance to measure friction margin in force space and derives a task-adaptive margin from the force correction needed to balance pivot moment deviations in bimanual tilting. The resulting contact margins are embedded in a sequence of second-order cone programs (SOCPs), each giving a globally optimal contact force solution at a tilt angle. The optimizer balances the object about an environmental pivot while keeping robot and pivot contact forces away from the nominal friction boundary. Optimizer-level results show interpretable force redistribution and adaptation to object property changes. Real-world experiments demonstrate successful execution under object property variations and model mismatch, while fixed margin and no-margin comparisons illustrate the importance of adapting the margin to task demand. These results support signed friction distance margins as a force planning mechanism for maintaining contact in bimanual non-prehensile manipulation. Project page: https://keeping-contact.github.io/

0.60

PolyMorphWBC: Whole-Body Control from End-Effector Trajectories for Quadrupedal Mobile Manipulation across Arm Morphologies with Extended Reach

cs.RO ·2026-11-11 ·Heng Li, Yang Li, Yifan Duan, Ren Fang, Matao Duan +4 more
similarity 0.61
Abstract · 8 pages, 4 figures

Quadrupedal mobile manipulators can extend their manipulation workspace by coordinating the mounted arm with the mobile base. At the task level, short-horizon end-effector (EE) trajectories provide an interface for specifying the desired manipulation motion without prescribing how it should be realized by the arm and base. However, executing such trajectories remains challenging because the controller must determine when and how the base should move, and this decision depends on the mounted-arm morphology. We therefore present PolyMorphWBC, a hierarchical controller that takes an EE trajectory as the sole task-level motion command and generates coordinated arm--base motions across four families of 6-DoF mounted arms, with extended-reach trajectories beyond the initial fixed-base reach. Within PolyMorphWBC, a trajectory-conditioned coordinator determines the base motion from previewed EE targets, while arm-specific Inverse Kinematics (IK) tracks the current target, and a frozen locomotion backend executes the resulting motion. Cross-arm reuse is enabled by a Unified Robot Description Format (URDF)-derived morphology conditioning, together with online residual-wrench feedback. We train PolyMorphWBC on procedurally generated arms and structured trajectories within and beyond fixed-base reach. In IsaacLab, it achieves 93.95% completion with 2.30cm position error and 4.81° orientation error on held-out trajectories and arm morphologies. In MuJoCo evaluation against UMI-on-Legs, PolyMorphWBC reduces EE position error by 69--72% and orientation error by 91--97% across four within- and extended-reach trajectories. On a physical Go2--ARX5 system, we demonstrate language-conditioned extended-reach pick-and-place using EE trajectories from pi_0 without vision-language-action (VLA)-generated base commands.

0.13