CS Paper Radar

Fast Planning for Multi-object Multi-target Throwing

Zhengming Zhu, Yang Liu, Xiao Gao, Aude Billard

cs.RO eess.SY ·submitted 2026-10-06 23:37 UTC · v1
published

Abstract

Robot throwing has emerged as a promising technique for improving efficiency in logistics and warehouse automation, by enlarging the workspace and speeding up the process. To significantly increase the throwing system's throughput, we develop strategies for throwing multiple objects in one swipe. Such multi-object multi-target throwing (MOMT) leverages the large degrees of freedom of anthropomorphic hands. The key is to quickly generate fast and feasible throwing motions, which involves a complex trade-off between short trajectory duration and short planning time. We solve this problem in two stages. Offline, we build a model of the feasible set by combining object's inverted flying dynamics and the robot's kinematics and dynamics. Online, we generate feasible throws through fast solution matching and filtering of object's valid detach state and robot's feasible state that can compose sequences of throws in less than 5 ms. We validate the framework on a 7-DoF manipulator equipped with a multi-fingered hand. In simulation, coordinated two-object throwing reduces execution time by up to 46% compared to independent single-object planning, and this improvement is maintained when scaling to three objects. Real-world experiments with two objects confirm a 29% reduction; the remaining gap to the theoretical 50% is attributed to inter-throw transition overhead. When target positions are randomly changed mid-execution, the system re-plans and successfully reaches the new targets within 100 ms latency without stopping the robot. These results establish the first unified planning framework for MOMT throwing -- demonstrating scalability to multiple objects in simulation and real-world feasibility on two-object tasks -- advancing the frontier of high-throughput robotic manipulation. A video summarizing the method and the hardware experiments is available at https://liuyangdh.github.io/momt-video

Comment
Accepted to IROS 2026. 8 pages, 9 figures. Zhengming Zhu and Yang Liu contributed equally. Video Summary: https://liuyangdh.github.io/momt-video

Closest papers

Nearest neighbours by meaning across the whole index.

Robotic Boomerang Throwing via Model-Based Release Design

cs.RO ·2026-10-07 ·Yang Liu, Colin Jones, Aude Billard
code/data similarity 0.70
Abstract · Project page: https://robot-boomerang.github.io

Throwing objects that generate aerodynamic lift can greatly extend robot throwing beyond ballistic flight. A returning boomerang is a challenging example because its flight depends strongly on the release velocity, attitude, and spin, while robotic manipulators cannot readily reproduce the rapid motions used in human throwing. We present a model-based framework for robotic boomerang throwing centered on the release state. We identify the boomerang flight dynamics in stages to predict how flight changes across design variations. To systematically design the robot throwing motion, we screen candidate parameters according to how strongly and consistently they control release spin under uncertain contact conditions. These models are then used to design the throwing motion and boomerang for a 6-DoF manipulator with limited joint speeds. To our knowledge, this is the first robotic manipulator to generate a returning boomerang flight. In the demonstrated returning trial, the boomerang is released at 51 rad/s (8.1 rev/s), reaches 2.03 m from the robot base, and returns to touch down 0.31 m from the base. The successful release differs significantly from the measured human throws, showing that a robot need not imitate human throwing motion to achieve a returning flight. The project page is available at https://robot-boomerang.github.io

0.23

QuadHand: A Compact Quadrotor Aerial Manipulator with MRC-SDF-Based Whole-Body Motion Planning

cs.RO ·2026-09-28 ·Rui Jin, Ruiyang Liu, Xinhang Xu, Haotian Jin, Yi Wang +2 more
highly cited similarity 0.66
Abstract

Uncrewed aerial manipulators (UAMs) integrate robotic arms with aerial platforms for three-dimensional physical interaction. However, enlarging the workspace increases arm-induced disturbances, while existing geometric representations face a trade-off between geometric fidelity and computational efficiency in close-proximity interaction. This paper presents QuadHand, a compact quadrotor aerial manipulator with a 3-DoF arm, gripper, and battery-assisted passive CoG compensation module to reduce dominant arm-induced disturbances. We further propose MRC-SDF, a Multi-articulated Robot-Centric Signed Distance Field that preserves fine geometric detail with tractable computation, and a spatiotemporal whole-body trajectory optimization framework that jointly optimizes the quadrotor and manipulator for safe and executable trajectory generation. Simulations and real-world experiments demonstrate safe and executable aerial manipulation in complex environments.

0.36

WRAP: Fixtureless Wrench-aware Multi-Robot Assembly Planning

cs.RO ·2026-09-24 ·Valentin N. Hartmann, Huang Su, Yijiang Huang, Stelian Coros
benchmarkcode/data similarity 0.65
Abstract · 8 pages, 9 figures, 5 tables

Assembly using robots often requires specially designed fixtures, or relies on top-down only assembly strategies. Using multiple robots, we can avoid using fixtures and make robotic assembly more flexible. Planning assembly sequences for multiple robots is challenging due to the high number of possible task assignments and orders. In addition, we need to reason over forces that occur during the assembly process, e.g., to decide if multiple robots are required for support, or if external support such as a table should be used. We present Wrap, a multi-robot assembly planner for multi-part assemblies, given the inter-part ordering-dependencies, the part meshes, and their initial state. We formulate a linear program to reason about valid grasps for supporting the forces that occur during assembly. The search leverages the assembly sequence, and greedily finds a feasible solution per assembly step by computing a heuristic via a cheap backwards search, and using the heuristic in the more expensive forward search. We then solve the multi-robot, multi-goal motion planning problem, and for execution, we split the plan into contact-rich assembly skills, and free space motion. We benchmark the planner on a variety of multi-part assemblies, and apply the planner to groups of robots differing in size and kinematics. We validate the work both in a physics simulation, and in real. Videos and code are available at https://www.vhartmann.com/wrap.

0.33

Becoming a Fruit Ninja: Real-Time Probabilistic Kinodynamic Planning for Manipulator Projectile Interception

cs.RO ·2026-09-18 ·Lucas Chen, Austin Garrett, Andrew Niu, Zachary Kingston
hot direction similarity 0.65
Abstract · 8 pages, 4 figures, 5 tables. Submitted to the 2027 IEEE International Conference on Robotics and Automation

Projectile interception is a challenging dynamic manipulation problem. Intercepting a thrown object with a robot arm requires reaching a point on the object's path as the object passes through it. Slicing also fixes the blade's velocity and orientation at contact. The goal is therefore a subset of the states of the robot and arrival times that moves as the object falls, and the arm must reach it within its actuator limits in milliseconds. We present FRUITNINJA, an anytime sampling-based planner that grows a tree on the GPU in batches toward the interception manifold. Each edge is an exact cubic whose travel time is found by a parallel search against the arm's dynamics, so every edge satisfies the actuator limits. Plans are ranked by a risk-aware objective over the uncertainty in the object's position and the arm's arrival time. We evaluate on a Franka Research 3 against six baselines in a calibrated real-time simulator, where FRUITNINJA cuts 96.7% of tosses in the open and 68.3% among five obstacles, versus the best baseline's 68.3% and 35.0% respectively.

0.60

Non-Prehensile Throwing: A Reinforcement Learning Perspective

cs.RO ·2026-09-01 ·Abdullah Mustafa, Ryo Hanai, Ixchel G. Ramirez-Alpizar, Floris Erich, Ryoichi Nakajo +2 more
published similarity 0.65
Abstract · 8 pages, 9 figures, Accepted to IEEE IROS 2026

Robotic throwing enables fast object transport and extends a robot's reachable workspace beyond traditional pick-and-place. While prehensile (grasp-based) throwing works well for graspable items, non-prehensile (grasp-free) throwing is better suited for large, heavy, and/or deformable objects. Existing approaches rely on model-based optimization with simplified contact models (e.g., dynamic grasping) and low-dimensional trajectory parameterizations, which limit solution quality and reachable workspace. We propose a reinforcement learning approach that additionally leverages sliding and rolling contact modes and directly optimizes joint-space trajectories without analytical contact models or custom parameterizations. The Markov Decision Process (MDP) is formulated as a dynamical system that evolves the robot's joint state conditioned on the throwing target, object model, and initial configuration. Joint-jerk trajectories are planned offline at a low control rate and upsampled into smooth, high-rate velocity commands for deployment. For sim-to-real transfer, we minimize the robot-dynamics gap through minimum-jerk system identification and train uncertainty-aware policies to mitigate object-modeling errors, particularly sensitivity to dynamic friction. In simulation, the policy achieves 99% success across thousands of configurations and generalizes to unseen objects. Sensitivity analysis shows robustness to mass uncertainty but high sensitivity to dynamic friction, consistent with the sliding-based release mechanism. Deployed zero-shot on a UR5e operating near its physical limits (5 m/s end-effector velocity), our method throws diverse objects including heavy (790 g) and large (20x20x28 cm) items to targets up to 350 cm distance or 180 cm elevation, achieving a 97% real-world success rate.

0.25

Drone Soccer: Learning to Manipulate with Multicopter Downwash

cs.RO ·2026-09-29 ·Neelay Joglekar, Bavin Saravanan, Yutong Wang, Varun Kandiyappan, Junyi Geng +1 more
published similarity 0.64
Abstract · 5 pages, 3 figures, IROS 2026 Workshop (Sim2Real and Classical Control)

Although multicopter drones are traditionally designed for "perception-only" tasks, like mapping and exploration, recent work has sought to develop Unmanned Aerial Manipulators (UAMs) to solve mobile manipulation tasks. Aerial manipulation performance can be impacted by "downwash," the airflow produced by propellers, but current state-of-the-art UAMs either ignore downwash or treat it as a disturbance. Instead, is it possible to actively use downwash as a tool during manipulation? We design a drone soccer task to explore the feasibility of downwash-based manipulation. Specifically, we develop a simplified downwash dynamics model which we use to train an RL policy to dribble a soccer ball. We further demonstrate that our policy transfers to real world deployment. This work provides key insights into novel manipulation capabilities for multicopters.

0.32

AthenaZero: A low-inertia, bimanual robot for dynamic manipulation

cs.RO ·2026-09-15 ·Andrew S. Morgan, Gregory Xie, Capprin Bass, Rachel Thomasson, Chunpeng Wang +21 more
top venue similarity 0.64
Abstract · Videos attached as ancillary. Cover article to September 2026 issue of Science Robotics

AthenaZero is a bimanual manipulator designed to minimize inertia without compromising control authority. By utilizing quasi-direct drive actuation and transmission remotization techniques, the system achieves an effective endpoint mass comparable to that of a human---about an order of magnitude less than conventional robot manipulators. This characteristic, combined with its inherent torque transparency, makes AthenaZero exceptionally well-suited for dynamic manipulation. We describe the methodology} that led to this design and demonstrate the robot's capabilities on three baseball-inspired tasks: throwing, catching, and batting, which showcase complex interactions on human-comparable timescales where milliseconds matter. AthenaZero was capable of throwing at speeds in excess of 30 m/s, with catching and batting at speeds in excess of 14 m/s over a short 7.3 m distance. Batting practice and a game of catch were subsequently performed in robot-to-robot and human-to-robot variations, showcasing the efficacy and adaptability of our system in tasks that require high acceleration.

0.68

GOTT: Object-centric Dexterous Manipulation with a Reusable Cross-Embodiment Primitive

cs.RO cs.AIcs.CV ·2026-10-02 ·Yulin Liu, Lai Wei, Yen-Jen Wang, Akash Sharma, Pieter Abbeel +2 more
code/data similarity 0.64
Abstract · Project page: https://dex-gott.github.io/

Foundation models and large-scale human data provide rich sources of manipulation intent, but translating this intent into multi-fingered robot behavior remains difficult. Dexterous hands still lack a reusable low-level primitive that reliably establishes contact across tasks and embodiments. We propose GOTT, a reach-acquire-move framework built around a single cross-embodiment contact-acquisition primitive. Given a robot-agnostic object trajectory and a reach specification, GOTT first brings the hand near a task-relevant contact region. The shared closed-loop primitive then establishes stable contact from this approximate initialization, and a pose-conditioned controller tracks the desired object motion. Reach specifications may come from future-aware planning, external models, or human demonstrations, while the primitive and tracking backend remain unchanged. Simulation and real-world experiments show that GOTT is able to establish robust contact across diverse objects, arm-hand platforms, and seen and unseen hand morphologies. It also consistently improves end-to-end task success over open-loop grasp execution.

0.46