CS Paper Radar

AthenaZero: A low-inertia, bimanual robot for dynamic manipulation

Andrew S. Morgan, Gregory Xie, Capprin Bass, Rachel Thomasson, Chunpeng Wang, Erfan Shahriari, Harrison Busa, Oluwaseun Araromi, Joseph Aronov, Michael Burgess, Velin D. Dimitrov, Matthew A. Estrada, Faris Hamdi, Samuel Kendig, Taeyoon Lee, Jose Oscar Mur-Miranda, Emma Sommers, Paul Titchener, Margaret Wang, Achu Wilson, Mark Yeatman, Osman Dogan Yirmibesoglu, Alfred A. Rizzi, Annan Mozeika, Nicolas Rojas, Lael Odhner

cs.RO ·submitted 2026-09-15 21:42 UTC · v1
top venue

Abstract

AthenaZero is a bimanual manipulator designed to minimize inertia without compromising control authority. By utilizing quasi-direct drive actuation and transmission remotization techniques, the system achieves an effective endpoint mass comparable to that of a human---about an order of magnitude less than conventional robot manipulators. This characteristic, combined with its inherent torque transparency, makes AthenaZero exceptionally well-suited for dynamic manipulation. We describe the methodology} that led to this design and demonstrate the robot's capabilities on three baseball-inspired tasks: throwing, catching, and batting, which showcase complex interactions on human-comparable timescales where milliseconds matter. AthenaZero was capable of throwing at speeds in excess of 30 m/s, with catching and batting at speeds in excess of 14 m/s over a short 7.3 m distance. Batting practice and a game of catch were subsequently performed in robot-to-robot and human-to-robot variations, showcasing the efficacy and adaptability of our system in tasks that require high acceleration.

Comment
Videos attached as ancillary. Cover article to September 2026 issue of Science Robotics
Journal ref
Science Robotics Vol. 11, No. 18 2026
DOI
10.1126/scirobotics.aee1868

Closest papers

Nearest neighbours by meaning across the whole index.

Robotic Boomerang Throwing via Model-Based Release Design

cs.RO ·2026-10-07 ·Yang Liu, Colin Jones, Aude Billard
code/data similarity 0.67
Abstract · Project page: https://robot-boomerang.github.io

Throwing objects that generate aerodynamic lift can greatly extend robot throwing beyond ballistic flight. A returning boomerang is a challenging example because its flight depends strongly on the release velocity, attitude, and spin, while robotic manipulators cannot readily reproduce the rapid motions used in human throwing. We present a model-based framework for robotic boomerang throwing centered on the release state. We identify the boomerang flight dynamics in stages to predict how flight changes across design variations. To systematically design the robot throwing motion, we screen candidate parameters according to how strongly and consistently they control release spin under uncertain contact conditions. These models are then used to design the throwing motion and boomerang for a 6-DoF manipulator with limited joint speeds. To our knowledge, this is the first robotic manipulator to generate a returning boomerang flight. In the demonstrated returning trial, the boomerang is released at 51 rad/s (8.1 rev/s), reaches 2.03 m from the robot base, and returns to touch down 0.31 m from the base. The successful release differs significantly from the measured human throws, showing that a robot need not imitate human throwing motion to achieve a returning flight. The project page is available at https://robot-boomerang.github.io

0.23

Throwing a Tight Spiral American Football by a Humanoid Robot

cs.RO ·2026-08-17 ·Zaid Mahboob, Bowen Weng
similarity 0.67
Abstract

Accurate throwing of the American football requires precise regulation of release conditions, where coupled linear and angular momentum determine flight stability and targeting accuracy. While prior work on robotic object throwing has largely focused on generating dynamically feasible release velocities using open-gripper paradigms, explicit control of spin injection at detachment remains underexplored, particularly for aerodynamically anisotropic objects like the American football. In this paper, we present the spin-stabilized controlled tight spiral throw of an American football by a humanoid robot. Achieving this requires (i) accurately reaching the desired coupled momentum, which often involves high degrees-of-freedom (DoF) movements completed within approximately half a second, and (ii) managing the complex transient contact dynamics that arise during the sub-100-millisecond release phase, when the football is effectively underactuated as it moves partially across the fingers. To this end, we develop a coupled whole-body control strategy where the lower body is performing informed stabilization while the upper body is further divided into two phases with (i) a throw phase accelerating the football to a target state through trajectory optimization and tracking, and (ii) a follow-through phase utilizing model predictive control to actively control the wrist and remaining in-contact fingers. The proposed framework is empirically validated on a 29-DoF Unitree G1 humanoid equipped with a 7-DoF Dex3-1 three-fingered gripper. The thrown American football reaches up to 93.6% spin efficiency and a 0.286 radians linear-velocity-to-nose-alignment (nose-angle) error (where an "ideal" tight spiral corresponds to 100 % spin efficiency and 0 radians nose-angle error) at up to a 5.35 m/s linear velocity and an angular velocity of 14.5 rad/s.

0.24

Fast Planning for Multi-object Multi-target Throwing

cs.RO eess.SY ·2026-10-06 ·Zhengming Zhu, Yang Liu, Xiao Gao, Aude Billard
published similarity 0.64
Abstract · Accepted to IROS 2026. 8 pages, 9 figures. Zhengming Zhu and Yang Liu contributed equally. Video Summary: https://liuyangdh.github.io/momt-v…

Robot throwing has emerged as a promising technique for improving efficiency in logistics and warehouse automation, by enlarging the workspace and speeding up the process. To significantly increase the throwing system's throughput, we develop strategies for throwing multiple objects in one swipe. Such multi-object multi-target throwing (MOMT) leverages the large degrees of freedom of anthropomorphic hands. The key is to quickly generate fast and feasible throwing motions, which involves a complex trade-off between short trajectory duration and short planning time. We solve this problem in two stages. Offline, we build a model of the feasible set by combining object's inverted flying dynamics and the robot's kinematics and dynamics. Online, we generate feasible throws through fast solution matching and filtering of object's valid detach state and robot's feasible state that can compose sequences of throws in less than 5 ms. We validate the framework on a 7-DoF manipulator equipped with a multi-fingered hand. In simulation, coordinated two-object throwing reduces execution time by up to 46% compared to independent single-object planning, and this improvement is maintained when scaling to three objects. Real-world experiments with two objects confirm a 29% reduction; the remaining gap to the theoretical 50% is attributed to inter-throw transition overhead. When target positions are randomly changed mid-execution, the system re-plans and successfully reaches the new targets within 100 ms latency without stopping the robot. These results establish the first unified planning framework for MOMT throwing -- demonstrating scalability to multiple objects in simulation and real-world feasibility on two-object tasks -- advancing the frontier of high-throughput robotic manipulation. A video summarizing the method and the hardware experiments is available at https://liuyangdh.github.io/momt-video

0.50

PingpongDuo: Agile Humanoid Table Tennis Doubles with Safe Team Coordination

cs.RO ·2026-10-14 ·Haoran Jiang, Yichao Zhong, Kai Zhang, Cheng Liu, Yixuan Pan +4 more
code/data similarity 0.62
Abstract · 9 pages, 6 figures. Project page: https://www.archon.tech/research/PingpongDuo

Unlike singles, humanoid table tennis doubles requires teammates to strike in strict alternation while sharing a confined workspace. Rapid repositioning can compromise striking accuracy, while uncoordinated teammate movements introduce collision risks. We present PingpongDuo, a hierarchical framework for agile humanoid doubles with safe team coordination. At the team level, a planner jointly selects positioning targets and uses learned risk estimates to filter risky proposals, preferentially preserving the current striker's target. At the individual level, separate footwork and striking skills combine agile movement with precise racket control. The skills are guided by human motion references, including footwork collected from human doubles play, and trained from states produced by one another to support rapid transitions. A racket-arm residual further refines strikes after movement using return feedback from a simulator calibrated with real ball-flight and contact measurements. In simulation, PingpongDuo improves the ball-return success rate by 13.2% over the state-of-the-art baseline, while achieving approximately 2 cm positioning error during clearance. In real-world experiments, a robot completes a 2.15 m clearance-and-recovery cycle in 2.4 s with a peak speed of 2.23 m/s, while two robots sustain more than 10 consecutive strikes in strict alternation.

0.40

TinyARM-X: A Series of Open-Source, Configurable, and Transparent Torque-Controlled Desktop-Scale Robotic Manipulators

cs.RO ·2026-11-18 ·Nicolas Kosanovic, Jean Chagas Vaz
similarity 0.60
Abstract · 9 pages, 5 figures. Submitted to a robotics Journal. Reviews have not come in yet

Visuomotor policies have demonstrated that imprecise low-cost robots can autonomously complete complex manipulation tasks. However, most inexpensive manipulators rely on compact and rigidly position-controlled servos for actuation, which complicate simulation, operation, and safety. This work introduces TinyARM-X, a framework for easily manufacturable, configurable, and torque-controllable low-cost (<350 USD) serial manipulators. By using a single hardware/software architecture, a <7 Degree of Freedom (DoF) TinyARM can be manually reconfigured to an operational >3 DoF robot within 10 min. Actuator modeling and dynamic compensation enable torque-controlled applications like mixed-reality impedance control teleoperation and simulator force feedback rendering. Experiments include mechanical benchmarking and real-world force-aware telemanipulation. The TinyARM-7 has a payload of 33.5 g, a max speed of 0.77 m/s, and a reach of 210 mm. Moreover, with dynamic compensation, the robot has a backdrive-breakaway force of 1.4 N and a backdrive-running force of 0.7 N. Additionally, Cartesian-Impedance Control (CIC) attains a translational stiffness of >15 N/m. Lastly, the TinyARM-X stack is open-sourced to disseminate accessible desktop-scale torque-controlled robotic manipulation to the community.

0.22

ATHLETE: Learning Reactive Humanoid Tennis via Trajectory-Guided Motion Matching

cs.RO ·2026-10-09 ·Zhihao Tian, Zifan Wang, Enzheng Zhu, Xun Yang, Jialong Qin +2 more
code/data similarity 0.60
Abstract · projectpage:https://hazintihoa.github.io/athlete.github.io/#overview

Humanoid tennis requires reactive whole-body coordination under rapidly changing ball dynamics, yet collecting task-specific motion-capture demonstrations that cover diverse approach states, contact locations, and timing conditions is costly. Inspired by how humans acquire new skills by combining reusable motor experience with task-specific demonstrations, we present ATHLETE, a framework for learning reactive humanoid tennis from generic locomotion data and ordinary tennis videos. ATHLETE combines LAFAN1 locomotion with video-derived striking motions and uses Trajectory-Guided Motion Matching (TGMM) to construct diverse task-conditioned whole-body references. These references are transformed into a reactive policy through physics-based teacher--student learning with online DAgger distillation, followed by PPO fine-tuning for the tennis task. The resulting policy responds directly to robot and ball observations without requiring reference-motion inputs at deployment. On a real humanoid robot, ATHLETE achieves forehand and backhand hit rates of $90.00\%$ and $86.67\%$, respectively, and enables multi-shot rallies with human players. These results demonstrate that ATHLETE can learn dynamic humanoid tennis skills from reusable locomotion data and video demonstrations. Result videos and code can be found at https://anonymous.4open.science/w/ATHLETE2027/.

0.27

From Hitter to Player: Separating Motor Execution and Strategy in Competitive Humanoid Table Tennis

cs.RO ·2026-10-07 ·Fanrong Dong, Ziyi Sun, Ziqi Han, Junhan Sun, Lei Ye +4 more
code/data similarity 0.59
Abstract · 8 pages, 7 figures. Project page: https://mufanmufan.github.io/hitter-to-player/

Competitive humanoid table tennis requires two distinct abilities: executing a desired return and deciding where to return the ball. We separate these two problems, with the ball landing target serving as an interface between motor control and strategy. (1) We first train a whole-body motor policy conditioned on the desired landing target, which maps the target to an executable humanoid stroke through a model-based strike planner and a learned controller. (2) We then improve the motor policy through self-play in closed-loop rallies, where the robot learns to handle incoming balls generated by another player rather than only prescribed incoming balls. At this stage, the landing targets are still sampled without considering the opponent, so the policy improves its execution without learning game strategy. (3) Finally, we freeze the entire motor stack and train a stroke-level strategic policy to choose landing targets through competitive self-play. Motor self-play improves both landing accuracy and legal-return rate during rallies. More importantly, with the entire motor stack fixed, changing only the target-selection policy leads to large differences in game outcomes: the learned strategy wins 89%, 82%, and 73% of points against center, random, and away-from-opponent baselines, respectively. The learned strategy also changes where it sends the ball according to the opponent's position and the previous target, showing that self-play learns more than simply aiming at fixed "good" locations. On hardware, the same frozen execution stack and strategic interface support complete 11-point games against a recreational human opponent, including multi-stroke rallies with both forehand and backhand returns.

0.27

Drone Soccer: Learning to Manipulate with Multicopter Downwash

cs.RO ·2026-09-29 ·Neelay Joglekar, Bavin Saravanan, Yutong Wang, Varun Kandiyappan, Junyi Geng +1 more
published similarity 0.59
Abstract · 5 pages, 3 figures, IROS 2026 Workshop (Sim2Real and Classical Control)

Although multicopter drones are traditionally designed for "perception-only" tasks, like mapping and exploration, recent work has sought to develop Unmanned Aerial Manipulators (UAMs) to solve mobile manipulation tasks. Aerial manipulation performance can be impacted by "downwash," the airflow produced by propellers, but current state-of-the-art UAMs either ignore downwash or treat it as a disturbance. Instead, is it possible to actively use downwash as a tool during manipulation? We design a drone soccer task to explore the feasibility of downwash-based manipulation. Specifically, we develop a simplified downwash dynamics model which we use to train an RL policy to dribble a soccer ball. We further demonstrate that our policy transfers to real world deployment. This work provides key insights into novel manipulation capabilities for multicopters.

0.32