CS Paper Radar

Throwing a Tight Spiral American Football by a Humanoid Robot

Zaid Mahboob, Bowen Weng

cs.RO ·submitted 2026-08-17 14:40 UTC · v2

Abstract

Accurate throwing of the American football requires precise regulation of release conditions, where coupled linear and angular momentum determine flight stability and targeting accuracy. While prior work on robotic object throwing has largely focused on generating dynamically feasible release velocities using open-gripper paradigms, explicit control of spin injection at detachment remains underexplored, particularly for aerodynamically anisotropic objects like the American football. In this paper, we present the spin-stabilized controlled tight spiral throw of an American football by a humanoid robot. Achieving this requires (i) accurately reaching the desired coupled momentum, which often involves high degrees-of-freedom (DoF) movements completed within approximately half a second, and (ii) managing the complex transient contact dynamics that arise during the sub-100-millisecond release phase, when the football is effectively underactuated as it moves partially across the fingers. To this end, we develop a coupled whole-body control strategy where the lower body is performing informed stabilization while the upper body is further divided into two phases with (i) a throw phase accelerating the football to a target state through trajectory optimization and tracking, and (ii) a follow-through phase utilizing model predictive control to actively control the wrist and remaining in-contact fingers. The proposed framework is empirically validated on a 29-DoF Unitree G1 humanoid equipped with a 7-DoF Dex3-1 three-fingered gripper. The thrown American football reaches up to 93.6% spin efficiency and a 0.286 radians linear-velocity-to-nose-alignment (nose-angle) error (where an "ideal" tight spiral corresponds to 100 % spin efficiency and 0 radians nose-angle error) at up to a 5.35 m/s linear velocity and an angular velocity of 14.5 rad/s.

Closest papers

Nearest neighbours by meaning across the whole index.

Robotic Boomerang Throwing via Model-Based Release Design

cs.RO ·2026-10-07 ·Yang Liu, Colin Jones, Aude Billard
code/data similarity 0.76
Abstract · Project page: https://robot-boomerang.github.io

Throwing objects that generate aerodynamic lift can greatly extend robot throwing beyond ballistic flight. A returning boomerang is a challenging example because its flight depends strongly on the release velocity, attitude, and spin, while robotic manipulators cannot readily reproduce the rapid motions used in human throwing. We present a model-based framework for robotic boomerang throwing centered on the release state. We identify the boomerang flight dynamics in stages to predict how flight changes across design variations. To systematically design the robot throwing motion, we screen candidate parameters according to how strongly and consistently they control release spin under uncertain contact conditions. These models are then used to design the throwing motion and boomerang for a 6-DoF manipulator with limited joint speeds. To our knowledge, this is the first robotic manipulator to generate a returning boomerang flight. In the demonstrated returning trial, the boomerang is released at 51 rad/s (8.1 rev/s), reaches 2.03 m from the robot base, and returns to touch down 0.31 m from the base. The successful release differs significantly from the measured human throws, showing that a robot need not imitate human throwing motion to achieve a returning flight. The project page is available at https://robot-boomerang.github.io

0.23

AthenaZero: A low-inertia, bimanual robot for dynamic manipulation

cs.RO ·2026-09-15 ·Andrew S. Morgan, Gregory Xie, Capprin Bass, Rachel Thomasson, Chunpeng Wang +21 more
top venue similarity 0.67
Abstract · Videos attached as ancillary. Cover article to September 2026 issue of Science Robotics

AthenaZero is a bimanual manipulator designed to minimize inertia without compromising control authority. By utilizing quasi-direct drive actuation and transmission remotization techniques, the system achieves an effective endpoint mass comparable to that of a human---about an order of magnitude less than conventional robot manipulators. This characteristic, combined with its inherent torque transparency, makes AthenaZero exceptionally well-suited for dynamic manipulation. We describe the methodology} that led to this design and demonstrate the robot's capabilities on three baseball-inspired tasks: throwing, catching, and batting, which showcase complex interactions on human-comparable timescales where milliseconds matter. AthenaZero was capable of throwing at speeds in excess of 30 m/s, with catching and batting at speeds in excess of 14 m/s over a short 7.3 m distance. Batting practice and a game of catch were subsequently performed in robot-to-robot and human-to-robot variations, showcasing the efficacy and adaptability of our system in tasks that require high acceleration.

0.68

Banana Kick: Response-Informed Skill Evolution for Humanoid Soccer

cs.RO ·2026-09-23 ·Hao E. Zhang, Ruize Geng, Raihan Haque, Khalil Zbiss, Guanyang Luo +3 more
similarity 0.63
Abstract

Humanoid kicking requires coordinated whole-body motion and precise contact, while a banana kick demands contact mechanics that generate ball spin and aerodynamic curvature. Motion imitation provides a reliable ordinary-kick prior, but reinforcement learning may improve shot speed and placement accuracy without changing the underlying kicking technique. Adapting this prior to a qualitatively different contact-rich skill can fail even when the reward is dense and optimization remains stable. The failure occurs when the task objective is locally flat over the current policy's responses. We term this condition first-order learning starvation. To address it, we propose response-informed skill evolution (RISE), a closed-loop objective-continuation method for policy adaptation. RISE ranks bounded objective changes using response sensitivity estimated from cached rollouts and accepts updates only when they produce verified response progress while preserving kicking reliability. Our analysis shows that rescaling a saturated spin reward cannot recover first-order sensitivity at zero spin, whereas adapting coupled contact responses can provide a learnable path to spin generation. We integrate RISE into a humanoid kicking pipeline under calibrated contact and Magnus-force aerodynamics, and sim-to-real transfer. Experiments show that RISE evolves the ordinary kick into a high-spin curved kick with 11.55 rad/s mean ball spin, improves the mean evaluation score by 19.8% over a learning-progress curriculum, and raises joint target attainment from 15.2% to 50.9%. Ablations and response diagnostics support the mechanism, while 30 motion-capture-recorded physical trials demonstrate consistent hardware transfer of the learned curved kick. Project website: https://haozhang-thu.github.io/bananakick/

0.34

From Hitter to Player: Separating Motor Execution and Strategy in Competitive Humanoid Table Tennis

cs.RO ·2026-10-07 ·Fanrong Dong, Ziyi Sun, Ziqi Han, Junhan Sun, Lei Ye +4 more
code/data similarity 0.63
Abstract · 8 pages, 7 figures. Project page: https://mufanmufan.github.io/hitter-to-player/

Competitive humanoid table tennis requires two distinct abilities: executing a desired return and deciding where to return the ball. We separate these two problems, with the ball landing target serving as an interface between motor control and strategy. (1) We first train a whole-body motor policy conditioned on the desired landing target, which maps the target to an executable humanoid stroke through a model-based strike planner and a learned controller. (2) We then improve the motor policy through self-play in closed-loop rallies, where the robot learns to handle incoming balls generated by another player rather than only prescribed incoming balls. At this stage, the landing targets are still sampled without considering the opponent, so the policy improves its execution without learning game strategy. (3) Finally, we freeze the entire motor stack and train a stroke-level strategic policy to choose landing targets through competitive self-play. Motor self-play improves both landing accuracy and legal-return rate during rallies. More importantly, with the entire motor stack fixed, changing only the target-selection policy leads to large differences in game outcomes: the learned strategy wins 89%, 82%, and 73% of points against center, random, and away-from-opponent baselines, respectively. The learned strategy also changes where it sends the ball according to the opponent's position and the previous target, showing that self-play learns more than simply aiming at fixed "good" locations. On hardware, the same frozen execution stack and strategic interface support complete 11-point games against a recreational human opponent, including multi-stroke rallies with both forehand and backhand returns.

0.27

Fast Planning for Multi-object Multi-target Throwing

cs.RO eess.SY ·2026-10-06 ·Zhengming Zhu, Yang Liu, Xiao Gao, Aude Billard
published similarity 0.63
Abstract · Accepted to IROS 2026. 8 pages, 9 figures. Zhengming Zhu and Yang Liu contributed equally. Video Summary: https://liuyangdh.github.io/momt-v…

Robot throwing has emerged as a promising technique for improving efficiency in logistics and warehouse automation, by enlarging the workspace and speeding up the process. To significantly increase the throwing system's throughput, we develop strategies for throwing multiple objects in one swipe. Such multi-object multi-target throwing (MOMT) leverages the large degrees of freedom of anthropomorphic hands. The key is to quickly generate fast and feasible throwing motions, which involves a complex trade-off between short trajectory duration and short planning time. We solve this problem in two stages. Offline, we build a model of the feasible set by combining object's inverted flying dynamics and the robot's kinematics and dynamics. Online, we generate feasible throws through fast solution matching and filtering of object's valid detach state and robot's feasible state that can compose sequences of throws in less than 5 ms. We validate the framework on a 7-DoF manipulator equipped with a multi-fingered hand. In simulation, coordinated two-object throwing reduces execution time by up to 46% compared to independent single-object planning, and this improvement is maintained when scaling to three objects. Real-world experiments with two objects confirm a 29% reduction; the remaining gap to the theoretical 50% is attributed to inter-throw transition overhead. When target positions are randomly changed mid-execution, the system re-plans and successfully reaches the new targets within 100 ms latency without stopping the robot. These results establish the first unified planning framework for MOMT throwing -- demonstrating scalability to multiple objects in simulation and real-world feasibility on two-object tasks -- advancing the frontier of high-throughput robotic manipulation. A video summarizing the method and the hardware experiments is available at https://liuyangdh.github.io/momt-video

0.50

Optimize, Learn, Refine: Whole-Body Grasping and Pick-and-Throw with a Spiral Soft Robot

cs.RO ·2026-09-22 ·Marwah Basuhai, Tingcong Liu, Ibrahim Alsarraj, Yuhao Wang, Ke Wu
hot direction similarity 0.62
Abstract

Soft continuum robots can exploit distributed compliance for whole-body manipulation, but synthesizing behavior through changing contacts remains difficult. We address whole-body grasping and pick-and-throw from an initially ungrasped state through outcome-based actuation-space optimization. Grasping is quantified by tip angular sweep and body-object enclosure, while throwing further incorporates release-direction alignment and minimum release speed. These objectives allow grasping, acceleration, and release to emerge from compliant interaction without prescribing contact forces, contact locations, or body configurations. Because the resulting actuation-to-outcome mapping is nonsmooth, we utilize derivative-free CMA-ES within an optimize-learn-refine framework. CMA-ES generates solutions for sampled conditions, a task-conditioned predictor learns warm starts, and CMA-ES refines them for unseen conditions. In simulation, the method achieves 492/500 successful grasps (98.4%) and success rates of 98%, 97%, and 94% across three directional throwing trials. Learned initialization increases grasping success from 78.6% to 98.4% while reducing the median rollout count from 1184 to 816 in CMA-ES. Hardware experiments achieve a 100% grasping success rate across 50 executions and a 100% pick-and-throw success rate across 30 executions, with 10 repetitions per direction. Together, these simulation and hardware results demonstrate the effectiveness of the proposed framework across both simulated and physical whole-body manipulation tasks.

0.26

Anchor 1: Precise and Stable Humanoid Control for Whole-Body Manipulation

cs.RO ·2026-10-30 ·Archon Robotics, :, Caojun Wang, Checheng Yu, Gangcheng Jiang +22 more
benchmark similarity 0.61
Abstract

Humanoid controllers have acquired increasingly diverse motor skills, yet translating these capabilities into precise and stable whole-body manipulation remains challenging. Manipulation tasks are sensitive to execution deviations -- even small errors or unintended steps can cause failure. Introducing Anchor 1, a whole-body controller for precise and stable whole-body manipulation, together with a benchmark spanning diverse coordination demands. Anchor 1 adopts calibrated sparse motion references to preserve task-relevant human motion structure without online joint-space retargeting, leaving kinematic freedom for precise control. To guide this freedom towards stable, physically plausible whole-body coordination, we shape the training distribution through offline curation of robot motions paired with these calibrated sparse references. We further introduce explicit error feedback decoupled from motion encoding, improving control precision while supporting flexible command interfaces. To achieve a systematic evaluation of these capabilities, a benchmark is proposed to assess precision, sustained execution stability, and reachability across diverse whole-body coordination demands. Evaluations in simulation and on hardware show stronger precision and stability across all evaluation tracks. Under the most strict real-world global scoring setting, Anchor 1 achieves a 30\% to 80\% decrease in tracking error with fewer look-ahead inputs, and without retargeting compared to all existing controllers. Downstream experiments demonstrate more efficient teleoperated data collection and higher task success using the same deployment pipeline as well. We believe Anchor 1 supports precise and stable whole-body control as a practical basis for humanoid task execution.

0.18

Anti-Gravity Walking by a Flying Humanoid Robot via Thrust-Rate Input Whole-Body Model Predictive Control

cs.RO ·2026-09-07 ·Kazuki Sugihara, Kei Okada
top venue similarity 0.61
Abstract

Flying humanoids are expected to perform tasks in diverse environments, while their existing locomotion is mainly limited to aerial flight and ground walking. The capability to move in complex three-dimensional space can greatly expand their application range. For such walking motion on ceilings and similar anti-gravity environments, whole-body MPC is effective. However, the discontinuous changes in dynamic structure accompanying contact switching during walking can induce thrust spikes, resulting in control instability. Therefore, in this work, we propose and implement a real-time whole-body MPC framework for anti-gravity bipedal walking. First, we formulate whole-body MPC using the time derivative of thrust, namely thrust-rate, as the control input. This formulation guarantees continuity of the thrust trajectory during contact switching while preserving the sparse structure of the optimal control problem for fast computation. Second, we address the lack of natural support forces in anti-gravity environments. We introduce lower bounds on the foot-normal component of the contact force, and smoothly transfer them during the doublesupport phase. Finally, we implement the proposed framework and demonstrate anti-gravity walking by a flying humanoid through simulation and a hardware experiment. To the best of our knowledge, this is the first demonstration of multi-contact whole-body MPC for a transformable aerial robot and walking by a flying humanoid beyond the ground.

0.39