CS Paper Radar

Robotic Boomerang Throwing via Model-Based Release Design

Yang Liu, Colin Jones, Aude Billard

cs.RO ·submitted 2026-10-07 17:34 UTC · v1
code/data

Abstract

Throwing objects that generate aerodynamic lift can greatly extend robot throwing beyond ballistic flight. A returning boomerang is a challenging example because its flight depends strongly on the release velocity, attitude, and spin, while robotic manipulators cannot readily reproduce the rapid motions used in human throwing. We present a model-based framework for robotic boomerang throwing centered on the release state. We identify the boomerang flight dynamics in stages to predict how flight changes across design variations. To systematically design the robot throwing motion, we screen candidate parameters according to how strongly and consistently they control release spin under uncertain contact conditions. These models are then used to design the throwing motion and boomerang for a 6-DoF manipulator with limited joint speeds. To our knowledge, this is the first robotic manipulator to generate a returning boomerang flight. In the demonstrated returning trial, the boomerang is released at 51 rad/s (8.1 rev/s), reaches 2.03 m from the robot base, and returns to touch down 0.31 m from the base. The successful release differs significantly from the measured human throws, showing that a robot need not imitate human throwing motion to achieve a returning flight. The project page is available at https://robot-boomerang.github.io

Comment
Project page: https://robot-boomerang.github.io

Closest papers

Nearest neighbours by meaning across the whole index.

Throwing a Tight Spiral American Football by a Humanoid Robot

cs.RO ·2026-08-17 ·Zaid Mahboob, Bowen Weng
similarity 0.76
Abstract

Accurate throwing of the American football requires precise regulation of release conditions, where coupled linear and angular momentum determine flight stability and targeting accuracy. While prior work on robotic object throwing has largely focused on generating dynamically feasible release velocities using open-gripper paradigms, explicit control of spin injection at detachment remains underexplored, particularly for aerodynamically anisotropic objects like the American football. In this paper, we present the spin-stabilized controlled tight spiral throw of an American football by a humanoid robot. Achieving this requires (i) accurately reaching the desired coupled momentum, which often involves high degrees-of-freedom (DoF) movements completed within approximately half a second, and (ii) managing the complex transient contact dynamics that arise during the sub-100-millisecond release phase, when the football is effectively underactuated as it moves partially across the fingers. To this end, we develop a coupled whole-body control strategy where the lower body is performing informed stabilization while the upper body is further divided into two phases with (i) a throw phase accelerating the football to a target state through trajectory optimization and tracking, and (ii) a follow-through phase utilizing model predictive control to actively control the wrist and remaining in-contact fingers. The proposed framework is empirically validated on a 29-DoF Unitree G1 humanoid equipped with a 7-DoF Dex3-1 three-fingered gripper. The thrown American football reaches up to 93.6% spin efficiency and a 0.286 radians linear-velocity-to-nose-alignment (nose-angle) error (where an "ideal" tight spiral corresponds to 100 % spin efficiency and 0 radians nose-angle error) at up to a 5.35 m/s linear velocity and an angular velocity of 14.5 rad/s.

0.24

Fast Planning for Multi-object Multi-target Throwing

cs.RO eess.SY ·2026-10-06 ·Zhengming Zhu, Yang Liu, Xiao Gao, Aude Billard
published similarity 0.70
Abstract · Accepted to IROS 2026. 8 pages, 9 figures. Zhengming Zhu and Yang Liu contributed equally. Video Summary: https://liuyangdh.github.io/momt-v…

Robot throwing has emerged as a promising technique for improving efficiency in logistics and warehouse automation, by enlarging the workspace and speeding up the process. To significantly increase the throwing system's throughput, we develop strategies for throwing multiple objects in one swipe. Such multi-object multi-target throwing (MOMT) leverages the large degrees of freedom of anthropomorphic hands. The key is to quickly generate fast and feasible throwing motions, which involves a complex trade-off between short trajectory duration and short planning time. We solve this problem in two stages. Offline, we build a model of the feasible set by combining object's inverted flying dynamics and the robot's kinematics and dynamics. Online, we generate feasible throws through fast solution matching and filtering of object's valid detach state and robot's feasible state that can compose sequences of throws in less than 5 ms. We validate the framework on a 7-DoF manipulator equipped with a multi-fingered hand. In simulation, coordinated two-object throwing reduces execution time by up to 46% compared to independent single-object planning, and this improvement is maintained when scaling to three objects. Real-world experiments with two objects confirm a 29% reduction; the remaining gap to the theoretical 50% is attributed to inter-throw transition overhead. When target positions are randomly changed mid-execution, the system re-plans and successfully reaches the new targets within 100 ms latency without stopping the robot. These results establish the first unified planning framework for MOMT throwing -- demonstrating scalability to multiple objects in simulation and real-world feasibility on two-object tasks -- advancing the frontier of high-throughput robotic manipulation. A video summarizing the method and the hardware experiments is available at https://liuyangdh.github.io/momt-video

0.50

AthenaZero: A low-inertia, bimanual robot for dynamic manipulation

cs.RO ·2026-09-15 ·Andrew S. Morgan, Gregory Xie, Capprin Bass, Rachel Thomasson, Chunpeng Wang +21 more
top venue similarity 0.67
Abstract · Videos attached as ancillary. Cover article to September 2026 issue of Science Robotics

AthenaZero is a bimanual manipulator designed to minimize inertia without compromising control authority. By utilizing quasi-direct drive actuation and transmission remotization techniques, the system achieves an effective endpoint mass comparable to that of a human---about an order of magnitude less than conventional robot manipulators. This characteristic, combined with its inherent torque transparency, makes AthenaZero exceptionally well-suited for dynamic manipulation. We describe the methodology} that led to this design and demonstrate the robot's capabilities on three baseball-inspired tasks: throwing, catching, and batting, which showcase complex interactions on human-comparable timescales where milliseconds matter. AthenaZero was capable of throwing at speeds in excess of 30 m/s, with catching and batting at speeds in excess of 14 m/s over a short 7.3 m distance. Batting practice and a game of catch were subsequently performed in robot-to-robot and human-to-robot variations, showcasing the efficacy and adaptability of our system in tasks that require high acceleration.

0.68

Optimize, Learn, Refine: Whole-Body Grasping and Pick-and-Throw with a Spiral Soft Robot

cs.RO ·2026-09-22 ·Marwah Basuhai, Tingcong Liu, Ibrahim Alsarraj, Yuhao Wang, Ke Wu
hot direction similarity 0.62
Abstract

Soft continuum robots can exploit distributed compliance for whole-body manipulation, but synthesizing behavior through changing contacts remains difficult. We address whole-body grasping and pick-and-throw from an initially ungrasped state through outcome-based actuation-space optimization. Grasping is quantified by tip angular sweep and body-object enclosure, while throwing further incorporates release-direction alignment and minimum release speed. These objectives allow grasping, acceleration, and release to emerge from compliant interaction without prescribing contact forces, contact locations, or body configurations. Because the resulting actuation-to-outcome mapping is nonsmooth, we utilize derivative-free CMA-ES within an optimize-learn-refine framework. CMA-ES generates solutions for sampled conditions, a task-conditioned predictor learns warm starts, and CMA-ES refines them for unseen conditions. In simulation, the method achieves 492/500 successful grasps (98.4%) and success rates of 98%, 97%, and 94% across three directional throwing trials. Learned initialization increases grasping success from 78.6% to 98.4% while reducing the median rollout count from 1184 to 816 in CMA-ES. Hardware experiments achieve a 100% grasping success rate across 50 executions and a 100% pick-and-throw success rate across 30 executions, with 10 repetitions per direction. Together, these simulation and hardware results demonstrate the effectiveness of the proposed framework across both simulated and physical whole-body manipulation tasks.

0.26

Learning Whole-Body Kinetic Coordination for Wheeled-Quadruped Long-Range Throwing

cs.RO ·2026-08-28 ·Qinglian Wu, Yidian Hu, Weiqi Fan, Yutian Zhang, Siyuan Ma +3 more
similarity 0.61
Abstract · 8 pages, 5 figures

Long-range throwing on unstructured terrain is a key capability for mobile robots in delivery and retrieval tasks, but it requires high release velocity, coordinated whole-body motion, and robustness to terrain-induced disturbances. We present a whole-body kinetic-coordination framework for a wheeled-quadruped manipulator that combines kinetic-chain arm modeling with SQP-based trajectory optimization and a reference-guided reinforcement learning policy for coordinated base motion. The manipulator is first reduced to a kinetic-chain model and optimized under kinematic and dynamic constraints to produce a high-speed throwing reference. On a stationary base, the optimized arm trajectory reaches a release speed of 12.75 m/s and a throwing distance of 16.68 m. When whole-body coordination is enabled, the system further increases the release speed to 16.64 m/s and the throwing distance to 28.25 m. We then integrate the mobility of the wheeled-quadruped platform and validate the complete policy through hardware experiments on flat ground, grass, slopes, and rough roads. The results show that kinetic-chain optimization and whole-body coordination together enable robust long-range throwing across diverse unstructured terrains.

0.20

DexForge: High-Fidelity Physics-Informed Dexterous Retargeting

cs.RO ·2026-10-05 ·Meizhong Wang, Kun Cao, Ruiqi Ni, Lihua Xie, Yiguang Hong
code/data similarity 0.59
Abstract

Human demonstrations offer rich examples of precise dexterous manipulation and a promising source of robot training data. However, high-fidelity reproduction of demonstrated motions and hand-object interactions across robot embodiments remains challenging under physical constraints. We present DexForge, a differentiable physics-grounded framework for converting human video demonstrations into high-fidelity robot trajectories. We reconstruct spherical-Gaussian object models and hand-object motion from visual observations, then build a differentiable simulator combining efficient Gaussian collision detection with existing differentiable dynamics. Based on this simulator, DexForge combines contact-aware kinematic retargeting with force-aware dynamics retargeting: robot-adapted stable contacts guide kinematic reference construction and subsequent gradient-based control refinement for precise physical motion reproduction. Experiments on 130 DexYCB and HOT3D demonstrations across seven dexterous hands show success-rate gains of approximately 35-53 percentage points over the baseline, with object position and orientation tracking errors on successful trajectories reduced by approximately 34-67% and 71-78%, respectively. Further experiments demonstrate open-loop transfer to MuJoCo and real-robot execution. Our project page is available at https://wmz1226.github.io/DexForge/

0.24

PingpongDuo: Agile Humanoid Table Tennis Doubles with Safe Team Coordination

cs.RO ·2026-10-14 ·Haoran Jiang, Yichao Zhong, Kai Zhang, Cheng Liu, Yixuan Pan +4 more
code/data similarity 0.58
Abstract · 9 pages, 6 figures. Project page: https://www.archon.tech/research/PingpongDuo

Unlike singles, humanoid table tennis doubles requires teammates to strike in strict alternation while sharing a confined workspace. Rapid repositioning can compromise striking accuracy, while uncoordinated teammate movements introduce collision risks. We present PingpongDuo, a hierarchical framework for agile humanoid doubles with safe team coordination. At the team level, a planner jointly selects positioning targets and uses learned risk estimates to filter risky proposals, preferentially preserving the current striker's target. At the individual level, separate footwork and striking skills combine agile movement with precise racket control. The skills are guided by human motion references, including footwork collected from human doubles play, and trained from states produced by one another to support rapid transitions. A racket-arm residual further refines strikes after movement using return feedback from a simulator calibrated with real ball-flight and contact measurements. In simulation, PingpongDuo improves the ball-return success rate by 13.2% over the state-of-the-art baseline, while achieving approximately 2 cm positioning error during clearance. In real-world experiments, a robot completes a 2.15 m clearance-and-recovery cycle in 2.4 s with a peak speed of 2.23 m/s, while two robots sustain more than 10 consecutive strikes in strict alternation.

0.40

Becoming a Fruit Ninja: Real-Time Probabilistic Kinodynamic Planning for Manipulator Projectile Interception

cs.RO ·2026-09-18 ·Lucas Chen, Austin Garrett, Andrew Niu, Zachary Kingston
hot direction similarity 0.58
Abstract · 8 pages, 4 figures, 5 tables. Submitted to the 2027 IEEE International Conference on Robotics and Automation

Projectile interception is a challenging dynamic manipulation problem. Intercepting a thrown object with a robot arm requires reaching a point on the object's path as the object passes through it. Slicing also fixes the blade's velocity and orientation at contact. The goal is therefore a subset of the states of the robot and arrival times that moves as the object falls, and the arm must reach it within its actuator limits in milliseconds. We present FRUITNINJA, an anytime sampling-based planner that grows a tree on the GPU in batches toward the interception manifold. Each edge is an exact cubic whose travel time is found by a parallel search against the arm's dynamics, so every edge satisfies the actuator limits. Plans are ranked by a risk-aware objective over the uncertainty in the object's position and the arm's arrival time. We evaluate on a Franka Research 3 against six baselines in a calibrated real-time simulator, where FRUITNINJA cuts 96.7% of tosses in the open and 68.3% among five obstacles, versus the best baseline's 68.3% and 35.0% respectively.

0.60