CS Paper Radar

Antenna Coding by Pixel Antennas: Unlocking A New Dimension for Wireless Communications

Zixiang Han, Shanpu Shen, Yifei Yuan, Jiangzhou Wang, Ross Murch, Chih-Lin I

eess.SP cs.IT ·submitted 2026-10-07 16:04 UTC · v1

Abstract

Conventional wireless communication systems employ antennas with fixed radiation patterns. Enhancing system performance by increasing the number of antennas would push the limits of cost and size for communication devices. To overcome this issue, novel antenna technologies are urgently desired to break through the fundamental performance bottleneck and engineering limits. Pixel antennas provide a general framework for highly reconfigurable antennas, which can flexibly adjust radiation patterns via controlling variable lumped elements placed across adjacent pixels, unlocking novel degrees of freedom (DoF) in the beamspace domain. Recently, an emerging antenna coding technique links wireless system performance to the antenna configurations. This enables the use of pixel antennas to enhance system performance by leveraging the DoF from the antenna side. In this article, we provide a comprehensive overview on antenna coding by pixel antennas. Specifically, based on the pixel antenna model, the concept of antenna coding is firstly introduced, followed by a discussion on the classifications of antenna coding. Two cases for channel gain and multiplexing gain enhancement are highlighted to show the effectiveness of antenna coding in wireless communications. Besides, various optimization approaches for antenna coding design are investigated. Finally, the challenges and opportunities are outlined, providing guidance for future works.

Closest papers

Nearest neighbours by meaning across the whole index.

Fast Antenna Coding Based on Pixel Antennas for Enhancing Spectral Efficiency of MIMO Systems

eess.SP ·2026-10-07 ·Zixiang Han, Xin Su, Jing Jin, Shanpu Shen, Qingqing Wu +3 more
similarity 0.79
Abstract

A fast antenna coding technique based on pixel antennas is investigated. Antenna coding is a technique that dynamically controls the ON/OFF states of PIN diodes to adjust radiation patterns of pixel antennas. By switching the antenna coder at the baseband symbol period, this technique can modulate information on the radiation patterns in the beamspace. This allows the pixel antenna to transmit additional information, thereby enhancing the spectral efficiency (SE) of multiple-input multiple-output (MIMO) systems. Specifically in this work, we firstly introduce the concept of pixel antenna and the fast antenna coding. Then based on the beamspace channel representation, we provide the system model of MIMO with the fast antenna coding and derive the SE and bit error rate (BER). The SE enhancement achieved by fast antenna coding is also demonstrated. An optimization approach is also presented for obtaining the antenna coders that can generate the desired radiation patterns for fast antenna coding. Using the optimized antenna coders, we evaluate the SE, energy efficiency (EE), and BER of MIMO systems with fast antenna coding. The simulation results show that for a 4-by-4 MIMO system, SE is enhanced by 12 bits/s/Hz and EE can be improved by 33\% when compared with conventional MIMO, demonstrating the effectiveness of the fast antenna coding technique.

0.31

Radiation-Pattern-Based Channel Estimation for Reconfigurable Pixel Antennas

eess.SP ·2026-11-08 ·Daniel Dinis, Leo M. Lahti, Pasi Ylä-Oijala, Risto Wichman
similarity 0.63
Abstract

Reconfigurable pixel antennas provide spatial diversity through multiple radiation patterns generated by a single antenna aperture, but exploiting this diversity can require substantial pilot overhead for exhaustive channel estimation. This paper jointly considers beam-steerable pixel-antenna design and its communication-side channel estimation. A pixel antenna is designed to generate diverse radiation patterns, whose electromagnetic correlation is then exploited to interpolate unobserved channel responses from a limited number of measurements. The proposed approach is evaluated in terms of SNR gain and NMSE, demonstrating that effective pattern selection can be achieved with significantly reduced channel-observation overhead and can even outperform exhaustive scanning at low SNR.

0.27

Mutual-Coupling-Aware Electromagnetic and Signal Processing Co-Design for Pixel Antenna Arrays

eess.SP ·2026-10-06 ·Ping Ma, Mengzhen Liu, Rang Liu, Ming Li, A. Lee Swindlehurst
similarity 0.53
Abstract · 7 pages, 5 figures, fonference

Reconfigurable pixel antenna arrays provide additional electromagnetic (EM) degrees of freedom for wireless transmission by enabling hardware-level adaptation of radiation responses. In practical arrays, inter-element mutual coupling (MC) alters the switch-state-dependent responses, causing MC-unaware designs to be mismatched with the realized coupled-array channels. To address this issue, we propose an MC-aware EM and signal-processing co-design framework for downlink multi-user multiple-input single-output (MU-MISO) systems. The full pixel antenna array is modeled as a unified multi-port circuit network that jointly characterizes the feed ports and switch-controlled pixel ports. By combining the impedance matrix extracted from Computer Simulation Technology (CST) Studio Suite simulations with the full-array open-circuit far-field responses, we construct a switch-state-dependent EM-domain channel that explicitly captures both intra-antenna pixel coupling and inter-element MC. Based on this model, we formulate a sum-rate maximization problem over the binary switch-state vector and the transmit precoder. To address the resulting mixed-integer non-convex problem, we develop an alternating optimization algorithm in which the binary switch-state vector is updated via sequential exhaustive block optimization (SEBO), while the transmit precoder is optimized using fractional programming (FP). CST-based simulations show that the proposed MC-aware design outperforms MC-unaware, MC-free, and conventional patch-array baselines. These results demonstrate that accurate MC modeling is essential not only for reducing model mismatch, but also for exploiting the coupled embedded responses of practical pixel antenna arrays.

0.34

Finite-Aperture Modeling of Pattern-Reconfigurable Antennas for Multiuser Beamforming

eess.SP ·2026-10-07 ·Kangjian Chen, Han Qing Yang, Hang Wong
similarity 0.53
Abstract · 14 pages, 11 figures; submitted to IEEE for possible publication

This paper establishes a finite-aperture model for pattern-reconfigurable antennas (PRAs) and exploits its aperture-constrained Fourier representation to develop an efficient multiuser beamforming framework. First, we develop an ideal model by representing the complex radiation pattern using a Fourier series. By applying the Jacobi-Anger expansion, we relate the antenna aperture to the effective Fourier order and derive aperture-dependent power bounds for individual Fourier coefficients. Second, we employ a practical multiport network model and design three representative reconfigurable pixel antennas to verify the predicted effective Fourier orders and per-order power constraints. We then formulate weighted sum-rate maximization for multiuser downlink transmission under both models. Using bounded Fourier coefficients as auxiliary variables, we develop a coefficient-bound penalty-based weighted minimum mean-square error algorithm that separates continuous beamforming from discrete switch-state optimization. We further propose a one-bit neighborhood search that exploits the Sherman-Morrison identity to accelerate the discrete optimization. Simulation results validate the physical relevance of the ideal model and demonstrate multiuser sum-rate gains and reduced optimization runtime for densely switched antennas. The proposed model provides a physically grounded basis for PRA-enabled communication analysis and design, while the framework accommodates different beamforming objectives and PRA implementations.

0.32

Design of DoF-Robust MIMO via Generalized Pinching Antennas

cs.IT ·2026-10-27 ·Zhiguo Ding, Robert Schober, H. Vincent Poor
similarity 0.52
Abstract

Spatial degrees of freedom (DoF) are fundamental to the performance of multiple-input multiple-output (MIMO) systems. However, the use of conventional fixed-location antennas introduces disparities in the users' distances to a common base station, which makes the multi-user channel matrix more susceptible to rank deficiency and, consequently, a loss of spatial DoF. This paper shows that generalized pinching antennas can be used to design a new form of MIMO robust to the loss of spatial DoF. In particular, by deploying pinching antennas in close proximity to the users, the resulting multi-user channel Gram matrix can have a well-conditioned, almost diagonal structure, which reduces its sensitivity to the users' spatial deployment as well as the risk of rank deficiency. Two performance metrics, namely the rank-deficiency probability and the outage probability, are used to evaluate the performance of pinching-antenna-assisted MIMO transmission. The presented analytical and simulation results demonstrate the capability of pinching antennas to preserve spatial DoF and provide ubiquitous connectivity by effectively supporting users at spatially separated locations.

0.28

Joint EM-BB Beamforming Design for ISAC Systems With Reconfigurable Antenna Arrays

eess.SP ·2026-10-06 ·Jvxiang Hu, Mengzhen Liu, Rang Liu, Qian Liu, Ming Li
benchmark similarity 0.51
Abstract · 6 pages, 4 figures, conference

This paper investigates the joint electromagnetic (EM)-domain and baseband (BB)-domain beamforming for integrated sensing and communication (ISAC) systems enabled by pattern- and polarization-reconfigurable pixel-antenna arrays. A multiport-network-based antenna model is developed to map each binary switch configuration to its radiation response using the impedance and open-circuit radiation data extracted from Computer Simulation Technology (CST) Studio Suite simulations. Based on this model, polarization-aware virtual channels are constructed for downlink communication and statistical target sensing, leading to a mixed-integer nonconvex problem that maximizes the average sensing signal-to-noise ratio (SNR) subject to user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. To handle the coupled binary and continuous variables, we propose an alternating optimization algorithm, in which the EM-domain switch-state matrices are updated using successive exhaustive Boolean optimization (SEBO), the BB-domain precoder is optimized via a minorization-maximization (MM) and second-order cone programming (SOCP) procedure, and the sensing combiner is obtained from a Rayleigh-quotient update. Simulation results show that the proposed design achieves higher sensing SNR and stronger target-angle robustness than the fixed-patch benchmark.

0.30

Physically Consistent Channel Modeling and Signal Processing for Reconfigurable Wireless Systems

eess.SP ·2026-08-17 ·Ahmad Dkhan, Simon Tarboush, Hadi Sarieddeen, Robert W. Heath, Hakan Bagci +1 more
similarity 0.51
Abstract

Reconfigurable antennas are increasingly integrated into multi-antenna communication systems to exploit large apertures while reducing the hardware complexity, energy consumption, and implementation costs of classical massive arrays. Their reconfigurable electromagnetic (EM) properties, including dynamically varying radiation patterns and state-dependent mutual coupling, challenge the fixed-antenna and decoupled-port assumptions of conventional channel models. This motivates a physically consistent framework connecting Maxwell's equations, circuit theory, and information theory. In this tutorial, we develop a unified framework spanning three coupled dimensions: (i) reconfigurable antenna and transceiver architectures, (ii) physically consistent channel modeling, and (iii) physically consistent signal processing. We first establish a taxonomy covering tunable antennas, reconfigurable transceivers, and emerging array architectures, highlighting their reconfiguration mechanisms and hardware-performance trade-offs. We then develop modeling approaches based on Maxwell's equations, wavenumber-domain representations, multiport network theory, and computational electromagnetics, and use them to construct end-to-end channel and noise models that capture near-field propagation, mutual coupling, and circuit-level impairments. Building on these models, we examine architecture-aware channel estimation, beamforming, data detection, and channel decoding, emphasizing how physical structure reshapes algorithm design and performance-complexity trade-offs. Overall, the tutorial treats physical architecture, channel and noise models, and communication algorithms as coupled components of an end-to-end design, providing a unified foundation for physically consistent reconfigurable wireless systems.

0.34

Movable Antenna Arrays with Imperfect Channel State Information in Rich Scattering Environments

eess.SP ·2026-08-29 ·Yizhen Zhao, Amna Irshad, Emil Bjornson
published similarity 0.51
Abstract

The growing demand for high spectral efficiency in 6G and beyond has driven research into adaptive antenna architectures capable of exploiting the spatial structure of multipath propagation channels. Conventional base station arrays are deployed with fixed element positions and cannot adapt to the instantaneous spatial structure of the propagation channel. In contrast, movable antenna (MA) systems enable dynamic reconfiguration of antenna positions, allowing the array geometry to track the channel characteristics of the current user set. While prior MA studies have demonstrated significant gains under perfect or statistical channel state information (CSI) assumptions, the interplay between imperfect instantaneous CSI, antenna placement optimization, and precoder design has received limited attention. This paper addresses this gap by proposing a practical end-to-end framework encompassing uplink pilot transmission, MMSE channel estimation under a clustered multipath model, and downlink ZF precoding designed from estimated CSI. Antenna positions are optimized via particle swarm optimization under two objectives: sum-rate maximization and max-min fairness. Simulation results show that MA gains are most pronounced under sparse, near-LoS propagation and diminish as channel richness increases. Furthermore, we reveal a fundamental coupling between array geometry and precoder design: a fairness-oriented antenna geometry encodes spatial fairness information that is only recoverable when evaluated with a compatible power allocation strategy. A mismatched precoder can completely mask the geometric advantage, leading to misleading conclusions about the robustness of antenna placement to the choice of optimization objective. These findings provide practically relevant guidance for the design and evaluation of movable antenna systems under realistic operating conditions.

0.26