CS Paper Radar

Radiation-Pattern-Based Channel Estimation for Reconfigurable Pixel Antennas

Daniel Dinis, Leo M. Lahti, Pasi Ylä-Oijala, Risto Wichman

eess.SP ·submitted 2026-11-08 16:12 UTC · v1

Abstract

Reconfigurable pixel antennas provide spatial diversity through multiple radiation patterns generated by a single antenna aperture, but exploiting this diversity can require substantial pilot overhead for exhaustive channel estimation. This paper jointly considers beam-steerable pixel-antenna design and its communication-side channel estimation. A pixel antenna is designed to generate diverse radiation patterns, whose electromagnetic correlation is then exploited to interpolate unobserved channel responses from a limited number of measurements. The proposed approach is evaluated in terms of SNR gain and NMSE, demonstrating that effective pattern selection can be achieved with significantly reduced channel-observation overhead and can even outperform exhaustive scanning at low SNR.

Closest papers

Nearest neighbours by meaning across the whole index.

The Geometry of Mode Sampling in Reconfigurable MIMO Channel Extrapolation

cs.IT eess.SP ·2026-11-18 ·Shaoyang Sun, Chongwen Huang
similarity 0.67
Abstract · 5 pages, 3 figures, and 1 table. An 18-page supplement is included as an ancillary file

Pattern-reconfigurable arrays acquire channels by distributing radiation modes across their antenna elements. Equal mode counts fix the observation budget while leaving a spatial sampling choice that directly affects reconstruction of unmeasured channels. We establish how this assignment enters the inverse problem through the receive aperture and the coupling between propagation paths. For an isolated path with calibrated positive real responses, the power-weighted variance of antenna positions completely characterizes the assignment dependence of the profiled angle information at fixed mode counts. We then construct layouts with identical weighted apertures and different path correlations, exposing a limitation of aperture-based design in multipath propagation. A paired simulation study evaluates balanced random, contiguous, interleaved, and equal-moment sampling using a common estimator with per-detection joint angle refinement. Balanced random sampling substantially reduces complete-channel error relative to ascending contiguous blocks when some modes are entirely unobserved, with improvements across nearly all tested scenes at high signal-to-noise ratio. When every mode is sampled, the mean benefit is more sensitive to rare large errors. Together, the analysis and experiments connect the spatial distribution of mode measurements to both extrapolation accuracy and reconstruction stability.

0.35

Antenna Coding by Pixel Antennas: Unlocking A New Dimension for Wireless Communications

eess.SP cs.IT ·2026-10-07 ·Zixiang Han, Shanpu Shen, Yifei Yuan, Jiangzhou Wang, Ross Murch +1 more
similarity 0.63
Abstract

Conventional wireless communication systems employ antennas with fixed radiation patterns. Enhancing system performance by increasing the number of antennas would push the limits of cost and size for communication devices. To overcome this issue, novel antenna technologies are urgently desired to break through the fundamental performance bottleneck and engineering limits. Pixel antennas provide a general framework for highly reconfigurable antennas, which can flexibly adjust radiation patterns via controlling variable lumped elements placed across adjacent pixels, unlocking novel degrees of freedom (DoF) in the beamspace domain. Recently, an emerging antenna coding technique links wireless system performance to the antenna configurations. This enables the use of pixel antennas to enhance system performance by leveraging the DoF from the antenna side. In this article, we provide a comprehensive overview on antenna coding by pixel antennas. Specifically, based on the pixel antenna model, the concept of antenna coding is firstly introduced, followed by a discussion on the classifications of antenna coding. Two cases for channel gain and multiplexing gain enhancement are highlighted to show the effectiveness of antenna coding in wireless communications. Besides, various optimization approaches for antenna coding design are investigated. Finally, the challenges and opportunities are outlined, providing guidance for future works.

0.31

Physically Consistent Channel Modeling and Signal Processing for Reconfigurable Wireless Systems

eess.SP ·2026-08-17 ·Ahmad Dkhan, Simon Tarboush, Hadi Sarieddeen, Robert W. Heath, Hakan Bagci +1 more
similarity 0.59
Abstract

Reconfigurable antennas are increasingly integrated into multi-antenna communication systems to exploit large apertures while reducing the hardware complexity, energy consumption, and implementation costs of classical massive arrays. Their reconfigurable electromagnetic (EM) properties, including dynamically varying radiation patterns and state-dependent mutual coupling, challenge the fixed-antenna and decoupled-port assumptions of conventional channel models. This motivates a physically consistent framework connecting Maxwell's equations, circuit theory, and information theory. In this tutorial, we develop a unified framework spanning three coupled dimensions: (i) reconfigurable antenna and transceiver architectures, (ii) physically consistent channel modeling, and (iii) physically consistent signal processing. We first establish a taxonomy covering tunable antennas, reconfigurable transceivers, and emerging array architectures, highlighting their reconfiguration mechanisms and hardware-performance trade-offs. We then develop modeling approaches based on Maxwell's equations, wavenumber-domain representations, multiport network theory, and computational electromagnetics, and use them to construct end-to-end channel and noise models that capture near-field propagation, mutual coupling, and circuit-level impairments. Building on these models, we examine architecture-aware channel estimation, beamforming, data detection, and channel decoding, emphasizing how physical structure reshapes algorithm design and performance-complexity trade-offs. Overall, the tutorial treats physical architecture, channel and noise models, and communication algorithms as coupled components of an end-to-end design, providing a unified foundation for physically consistent reconfigurable wireless systems.

0.36

Joint Channel Scanning and Geometry-Aware Codebook Design for Movable Antenna Arrays

eess.SP ·2026-11-03 ·Amna Irshad, Luca Antonelli, Vitaly Petrov, Luca Sanguinetti, Emil Bjornson
hot direction similarity 0.59
Abstract

Multiple-input multiple-output (MIMO) systems rely on spatial degrees of freedom, but fixed antenna geometries cannot adapt to propagation environments. Movable antenna (MA) systems address this by adapting antenna positions to the channel. In discrete MA architectures, active antennas are selected from candidate positions, requiring channel state information (CSI) at those positions. With limited radio-frequency (RF) chains, CSI is acquired through successive pilot rounds, or antenna scanning, whose overhead can offset reconfiguration gains. This paper studies discrete MA geometry optimization when only a fraction of candidate positions is scanned. We show that a geometry-aware (GA) steering-vector codebook, constructed from the actual antenna coordinates, reconstructs channels more accurately than a conventional discrete Fourier transform (DFT) codebook when the optimized array departs from a uniform grid. We then show that the scanning fraction required to approach full-scan sum-rate performance depends on the CSI acquisition method: least-squares (LS) estimation degrades sharply under sparse scanning, while codebook-based acquisition remains robust. We also propose an adaptive scanning procedure that probes candidates in batches and stops automatically using the acquired pilots, avoiding a preset scanning budget. Finally, we quantify sum-rate losses as users move from their initial positions and evaluate recovery through re-scanning and geometry re-selection, relative to fixed-aperture operation with outdated or fresh CSI. Numerical results show that adaptive scanning achieves about 99.5% of the full-scan sum rate while scanning only 11% of candidate positions.

0.33

MIMO Channel Extrapolation to Unobserved Radiation Modes via Learned Path Refinement

cs.IT ·2026-11-18 ·Shaoyang Sun, Chongwen Huang
similarity 0.58
Abstract · 24 pages, 10 figures in total (5 pages and 3 figures in the main paper, 19 pages and 7 figures in the supplementary material). Chongwen Huan…

A pattern-reconfigurable multiple-input multiple-output (MIMO) receiver can sample every antenna element and still leave entire radiation modes unobserved. The calibrated patterns weight a common set of propagation paths, which links these missing channels to the measured rows. Our estimator learns to correct the complex gains and spatial frequencies of those paths, so a correction inferred from measured rows updates every unmeasured mode. Each stage combines a damped least-squares proposal with a learned correction scaled by noise power and local array sensitivity. Training on complete simulated channels rewards corrections that reduce prediction error across modes, including those with no measured rows. The learned rule transfers from pursuit-based training estimates to a ridge variable-projection initializer without retraining. In matched simulations, refinement reduces error on wholly unobserved modes as well as across the full channel. Coefficient updates account for most of the gain, and the learned rule further improves on adaptive ridge shrinkage at fixed angles. Individual channel trajectories show that extrapolation can improve even as the residual on the measured rows increases.

0.45

Joint EM-BB Beamforming Design for ISAC Systems With Reconfigurable Antenna Arrays

eess.SP ·2026-10-06 ·Jvxiang Hu, Mengzhen Liu, Rang Liu, Qian Liu, Ming Li
benchmark similarity 0.57
Abstract · 6 pages, 4 figures, conference

This paper investigates the joint electromagnetic (EM)-domain and baseband (BB)-domain beamforming for integrated sensing and communication (ISAC) systems enabled by pattern- and polarization-reconfigurable pixel-antenna arrays. A multiport-network-based antenna model is developed to map each binary switch configuration to its radiation response using the impedance and open-circuit radiation data extracted from Computer Simulation Technology (CST) Studio Suite simulations. Based on this model, polarization-aware virtual channels are constructed for downlink communication and statistical target sensing, leading to a mixed-integer nonconvex problem that maximizes the average sensing signal-to-noise ratio (SNR) subject to user signal-to-interference-plus-noise ratio (SINR) and transmit-power constraints. To handle the coupled binary and continuous variables, we propose an alternating optimization algorithm, in which the EM-domain switch-state matrices are updated using successive exhaustive Boolean optimization (SEBO), the BB-domain precoder is optimized via a minorization-maximization (MM) and second-order cone programming (SOCP) procedure, and the sensing combiner is obtained from a Rayleigh-quotient update. Simulation results show that the proposed design achieves higher sensing SNR and stronger target-angle robustness than the fixed-patch benchmark.

0.30

Mutual-Coupling-Aware Electromagnetic and Signal Processing Co-Design for Pixel Antenna Arrays

eess.SP ·2026-10-06 ·Ping Ma, Mengzhen Liu, Rang Liu, Ming Li, A. Lee Swindlehurst
similarity 0.57
Abstract · 7 pages, 5 figures, fonference

Reconfigurable pixel antenna arrays provide additional electromagnetic (EM) degrees of freedom for wireless transmission by enabling hardware-level adaptation of radiation responses. In practical arrays, inter-element mutual coupling (MC) alters the switch-state-dependent responses, causing MC-unaware designs to be mismatched with the realized coupled-array channels. To address this issue, we propose an MC-aware EM and signal-processing co-design framework for downlink multi-user multiple-input single-output (MU-MISO) systems. The full pixel antenna array is modeled as a unified multi-port circuit network that jointly characterizes the feed ports and switch-controlled pixel ports. By combining the impedance matrix extracted from Computer Simulation Technology (CST) Studio Suite simulations with the full-array open-circuit far-field responses, we construct a switch-state-dependent EM-domain channel that explicitly captures both intra-antenna pixel coupling and inter-element MC. Based on this model, we formulate a sum-rate maximization problem over the binary switch-state vector and the transmit precoder. To address the resulting mixed-integer non-convex problem, we develop an alternating optimization algorithm in which the binary switch-state vector is updated via sequential exhaustive block optimization (SEBO), while the transmit precoder is optimized using fractional programming (FP). CST-based simulations show that the proposed MC-aware design outperforms MC-unaware, MC-free, and conventional patch-array baselines. These results demonstrate that accurate MC modeling is essential not only for reducing model mismatch, but also for exploiting the coupled embedded responses of practical pixel antenna arrays.

0.41

Two-Stage Refinement Sparse Channel Estimation for Reconfigurable Intelligent Metasurface Antenna (RIMSA) Massive MIMO

cs.IT ·2026-09-19 ·Yakun Ma, Hui-Ming Wang, Jiaping He, Qingli Yan
top venue similarity 0.56
Abstract

To meet the increasing demands for high data rates and large capacity, next generation wireless communication systems require transceivers equipped with a large number of antennas. Massive multiple-input multiple-output (MIMO) with metasurface antennas has emerged as a promising solution. In this paper, we investigate the channel estimation problem for the emerging reconfigurable intelligent metasurface antenna (RIMSA) array systems. Specifically, we develop a two-stage refinement (TSR) channel estimation method based on the compressed sensing (CS) principle. In the first stage, we exploit the antenna structure of RIMSA to receive pilots by setting identical phase response vectors across all RIMSAs. In this manner, the coherence of the measurement matrix under the CS framework is reduced and the channel estimation performance is improved. However, this special design introduces channel direction-of-arrival (DoA) estimation ambiguity and yields an ambiguous candidate DoA set. In the second stage, we optimize the phase responses of the metamaterial elements to resolve the ambiguity and accurately estimate the DoAs and channel coefficients. Overall, the estimation accuracy is improved in the first stage at the cost of ambiguity, and this ambiguity is eliminated in the second stage. We illustrate the performance advantages of the TSR method by presenting the numerical results and comparing it with the existing methods.

0.28