CS Paper Radar

The Geometry of Mode Sampling in Reconfigurable MIMO Channel Extrapolation

Shaoyang Sun, Chongwen Huang

cs.IT eess.SP ·submitted 2026-11-18 02:50 UTC · v1

Abstract

Pattern-reconfigurable arrays acquire channels by distributing radiation modes across their antenna elements. Equal mode counts fix the observation budget while leaving a spatial sampling choice that directly affects reconstruction of unmeasured channels. We establish how this assignment enters the inverse problem through the receive aperture and the coupling between propagation paths. For an isolated path with calibrated positive real responses, the power-weighted variance of antenna positions completely characterizes the assignment dependence of the profiled angle information at fixed mode counts. We then construct layouts with identical weighted apertures and different path correlations, exposing a limitation of aperture-based design in multipath propagation. A paired simulation study evaluates balanced random, contiguous, interleaved, and equal-moment sampling using a common estimator with per-detection joint angle refinement. Balanced random sampling substantially reduces complete-channel error relative to ascending contiguous blocks when some modes are entirely unobserved, with improvements across nearly all tested scenes at high signal-to-noise ratio. When every mode is sampled, the mean benefit is more sensitive to rare large errors. Together, the analysis and experiments connect the spatial distribution of mode measurements to both extrapolation accuracy and reconstruction stability.

Comment
5 pages, 3 figures, and 1 table. An 18-page supplement is included as an ancillary file

Closest papers

Nearest neighbours by meaning across the whole index.

MIMO Channel Extrapolation to Unobserved Radiation Modes via Learned Path Refinement

cs.IT ·2026-11-18 ·Shaoyang Sun, Chongwen Huang
similarity 0.70
Abstract · 24 pages, 10 figures in total (5 pages and 3 figures in the main paper, 19 pages and 7 figures in the supplementary material). Chongwen Huan…

A pattern-reconfigurable multiple-input multiple-output (MIMO) receiver can sample every antenna element and still leave entire radiation modes unobserved. The calibrated patterns weight a common set of propagation paths, which links these missing channels to the measured rows. Our estimator learns to correct the complex gains and spatial frequencies of those paths, so a correction inferred from measured rows updates every unmeasured mode. Each stage combines a damped least-squares proposal with a learned correction scaled by noise power and local array sensitivity. Training on complete simulated channels rewards corrections that reduce prediction error across modes, including those with no measured rows. The learned rule transfers from pursuit-based training estimates to a ridge variable-projection initializer without retraining. In matched simulations, refinement reduces error on wholly unobserved modes as well as across the full channel. Coefficient updates account for most of the gain, and the learned rule further improves on adaptive ridge shrinkage at fixed angles. Individual channel trajectories show that extrapolation can improve even as the residual on the measured rows increases.

0.48

Radiation-Pattern-Based Channel Estimation for Reconfigurable Pixel Antennas

eess.SP ·2026-11-08 ·Daniel Dinis, Leo M. Lahti, Pasi Ylä-Oijala, Risto Wichman
similarity 0.67
Abstract

Reconfigurable pixel antennas provide spatial diversity through multiple radiation patterns generated by a single antenna aperture, but exploiting this diversity can require substantial pilot overhead for exhaustive channel estimation. This paper jointly considers beam-steerable pixel-antenna design and its communication-side channel estimation. A pixel antenna is designed to generate diverse radiation patterns, whose electromagnetic correlation is then exploited to interpolate unobserved channel responses from a limited number of measurements. The proposed approach is evaluated in terms of SNR gain and NMSE, demonstrating that effective pattern selection can be achieved with significantly reduced channel-observation overhead and can even outperform exhaustive scanning at low SNR.

0.27

Two-Stage Refinement Sparse Channel Estimation for Reconfigurable Intelligent Metasurface Antenna (RIMSA) Massive MIMO

cs.IT ·2026-09-19 ·Yakun Ma, Hui-Ming Wang, Jiaping He, Qingli Yan
top venue similarity 0.60
Abstract

To meet the increasing demands for high data rates and large capacity, next generation wireless communication systems require transceivers equipped with a large number of antennas. Massive multiple-input multiple-output (MIMO) with metasurface antennas has emerged as a promising solution. In this paper, we investigate the channel estimation problem for the emerging reconfigurable intelligent metasurface antenna (RIMSA) array systems. Specifically, we develop a two-stage refinement (TSR) channel estimation method based on the compressed sensing (CS) principle. In the first stage, we exploit the antenna structure of RIMSA to receive pilots by setting identical phase response vectors across all RIMSAs. In this manner, the coherence of the measurement matrix under the CS framework is reduced and the channel estimation performance is improved. However, this special design introduces channel direction-of-arrival (DoA) estimation ambiguity and yields an ambiguous candidate DoA set. In the second stage, we optimize the phase responses of the metamaterial elements to resolve the ambiguity and accurately estimate the DoAs and channel coefficients. Overall, the estimation accuracy is improved in the first stage at the cost of ambiguity, and this ambiguity is eliminated in the second stage. We illustrate the performance advantages of the TSR method by presenting the numerical results and comparing it with the existing methods.

0.28

Joint Channel Scanning and Geometry-Aware Codebook Design for Movable Antenna Arrays

eess.SP ·2026-11-03 ·Amna Irshad, Luca Antonelli, Vitaly Petrov, Luca Sanguinetti, Emil Bjornson
hot direction similarity 0.60
Abstract

Multiple-input multiple-output (MIMO) systems rely on spatial degrees of freedom, but fixed antenna geometries cannot adapt to propagation environments. Movable antenna (MA) systems address this by adapting antenna positions to the channel. In discrete MA architectures, active antennas are selected from candidate positions, requiring channel state information (CSI) at those positions. With limited radio-frequency (RF) chains, CSI is acquired through successive pilot rounds, or antenna scanning, whose overhead can offset reconfiguration gains. This paper studies discrete MA geometry optimization when only a fraction of candidate positions is scanned. We show that a geometry-aware (GA) steering-vector codebook, constructed from the actual antenna coordinates, reconstructs channels more accurately than a conventional discrete Fourier transform (DFT) codebook when the optimized array departs from a uniform grid. We then show that the scanning fraction required to approach full-scan sum-rate performance depends on the CSI acquisition method: least-squares (LS) estimation degrades sharply under sparse scanning, while codebook-based acquisition remains robust. We also propose an adaptive scanning procedure that probes candidates in batches and stops automatically using the acquired pilots, avoiding a preset scanning budget. Finally, we quantify sum-rate losses as users move from their initial positions and evaluate recovery through re-scanning and geometry re-selection, relative to fixed-aperture operation with outdated or fresh CSI. Numerical results show that adaptive scanning achieves about 99.5% of the full-scan sum rate while scanning only 11% of candidate positions.

0.33

Flexible Beamforming via Fluid Antenna Array: From Discrete to Continuous Array

cs.IT ·2026-10-25 ·Jingyuan Xu, Yuanhui Wu, Zhentian Zhang, Zaichen Zhang, Tuo Wu +4 more
similarity 0.59
Abstract · 12 pages, 9 figures. Submitted to IEEE Transactions on Wireless Communications

Fluid antenna arrays (FAAs) reconfigure their effective aperture by activating radiation ports from a dense set of candidate positions within a finite physical region, thereby offering geometry diversity beyond conventional fixed arrays. This paper studies arbitrary-direction far-field beam synthesis with a planar FAA. Since a fixed array adapts its beamforming weights on a predetermined spatial sampling structure, its ability to match desired beam patterns is limited when both the aperture and the number of active elements are constrained. To exploit the geometry diversity of the FAA, we propose a coarse-to-fine scheme that couples discrete port selection with continuous joint refinement. In the coarse stage, a fast Fourier transform (FFT) based phase retrieval step converts the amplitude-only beam specification into an aperture-compatible complex target, after which an FFT-tailored greedy method selects the active ports and least squares initializes their complex weights. In the fine stage, a projected adaptive moment estimation procedure jointly refines the continuous port positions and beamforming weights while enforcing the minimum interelement spacing. For the evaluated two-beam configuration, the proposed scheme increases the mainlobe energy fraction from 35.73% to 48.92% and reduces the peak sidelobe level from -2.30 dB to -3.83 dB relative to a fixed array with the same aperture and active-port count.

0.30

Cramér-Rao Bound Optimization for Joint Beamforming and Mode Selection in RDARS-Assisted ISAC Systems

eess.SP ·2026-10-01 ·Ahmad Reza Hassanshahi, Rouhollah Amiri, Fereidoon Behnia
benchmark similarity 0.58
Abstract

Integrated Sensing and Communication (ISAC) is a foundation of 6G networks, demanding architectures that simultaneously enhance sensing accuracy and communication reliability. This paper presents a Reconfigurable Distributed Antenna and Reflecting Surface (RDARS) aided ISAC framework, where an RDARS overcomes the limitations of conventional passive Reconfigurable Intelligent Surfaces (RIS) and Distributed Antenna Systems (DAS). By enabling each element to dynamically operate in either \textit{reflection} or \textit{connection} mode, RDARS synergistically harnesses reflection gain, distribution gain, and an additional mode-selection gain. We investigate the joint optimization of transmit beamforming at the base station and dynamic mode selection at the RDARS to minimize the sensing performance metric, namely the Cramér-Rao Bound (CRB) for target localization, while guaranteeing a minimum required Signal-to-Interference-plus-Noise Ratio (SINR) for multiple communication users. To solve the resulting non-convex and mixed-integer problem, we develop an efficient iterative algorithm based on the Alternating Optimization (AO) framework, effectively leveraging Majorization-Minimization (MM) and Penalty methods. Comprehensive simulations validate the proposed design, demonstrating that the dynamic RDARS configuration achieves a superior trade-off between the Position Error Bound (PEB) and communication SINR, significantly outperforming benchmark passive RIS and DAS systems.

0.10

Multi-Mode Pinching-Antenna Systems: An Inter-Mode-Interference-Free Perspective

eess.SP ·2026-09-13 ·Jingjing Zhao, Songtao Xue, Xidong Mu, Kaiquan Cai, Zhiguo Ding
similarity 0.57
Abstract

The physical model of multi-mode pinching-antenna systems (PASS) is proposed based on the coupled-mode theory. Within the considered model, multiple guided modes are simultaneously excited in a single waveguide and exploited as independent signal-bearing channels, thus providing additional modal degrees of freedom for signal transmission. Under the local electromagnetic perturbations introduced by PAs, the undesired guided-modes coupling is explicitly investigated, and the resulting inter-mode interference (IMI) issue is revealed. The sufficient hardware-design condition for achieving the IMI-free regime is further established, for which the practical feasibility is validated through full-wave electromagnetic simulations. Then, a tractable signal model is derived for multi-mode PASS operating over the IMI-free regime. To demonstrate the benefits of the proposed multi-mode PASS model, the integrated sensing and communications (ISAC) is studied as a representative application scenario, where the base station simultaneously communicates with a communication user and senses a target by using two guided modes. A joint baseband and pinching beamforming optimization problem is formulated for the minimization of the Cramer-Rao bound for target localization, subject to the minimum communication rate requirement, under both continuous and discrete PAs activation cases. An alternating optimization-based algorithm is developed to address the formulated non-convex problem. For the baseband beamforming, a penalty-based successive convex approximation method is invoked. For the pinching beamforming, a particle swarm optimization algorithm and a two-sided matching algorithm are proposed for the continuous and discrete PAs activation cases, respectively. Numerical results obtained in the ISAC application scenario demonstrate the superiority of the proposed multi-mode PASS model over the single-mode PASS.

0.21

Reconfiguring Sparse Apertures: Partial-Mobility Planar FAS for 2-D DOA Estimation

eess.SP ·2026-09-06 ·Xiaokai Song, Tuo Wu, Jie Tang, Maged Elkashlan, K. C. Ho +1 more
similarity 0.57
Abstract · 14 figures, 2 tables

Classical sparse arrays enlarge the sensing aperture under limited element and radio-frequency (RF) chain budgets, but their fixed geometries impose a persistent tradeoff between wide-sector identifiability and local angular resolution. This paper converts this static design into a two-state reconfigurable sparse aperture by allowing only part of a planar fluid antenna system (FAS) to move after an initial observation. A compact, Nyquist-spaced seed first provides an ambiguity-controlled acquisition geometry. The remaining fluid ports then move or switch to information-efficient refinement positions, and the measurements collected before and after reconfiguration are jointly processed. We formulate the receiver under fixed total numbers of ports and RF chains, a movement budget, and a common total-snapshot budget. A policy-level Fisher information matrix (FIM) identity accounts for the observation-dependent refinement geometry. For a single source, a relaxed planar D-optimal analysis gives the corner-favoring aperture law, while a finite-port certificate bounds the information retained under spacing, reachability, and partial-actuation constraints. For multiple sources, an aperture-and-conditioning surrogate generates feasible sparse layouts that are ranked and locally refined using the exact frame FIM with coarray, spacing, and movement regularization. Seed multiple signal classification (MUSIC) identifies a reliable angular basin, followed by joint concentrated-likelihood refinement over both states. Equal-budget simulations show that reconfiguring a sparse aperture converts available area and movement into lower angular error and retains much of the all-movable gain with fewer actuated ports. They also identify the operating boundary: if a full sparse aperture can remain permanently deployed, avoiding movement and snapshot splitting can be preferable.

0.13