CS Paper Radar

SR-TTA: Spatial-Redundancy Test-Time Adaptation for Interference-Robust Respiration Sensing

Jingyuan Liu, Zheng Chang, Haoqiu Xiong, Zhuangzhuang Cui, Sofie Pollin

cs.LG ·submitted 2026-10-08 11:42 UTC · v1

Abstract

Future 6G networks aim to expose sensing as a native service by reusing communication infrastructure. We study respiration sensing on a cell-free massive multiple-input multiple-output (MIMO) base station, where a 64-antenna channel must be fused into a breathing waveform. The state-of-the-art hand-crafted fusion is near-optimal in benign conditions. It collapses, however, under strong in-band motion interference, whose frequency falls inside the respiration band. We show that a learned complex-weight beamformer recovers respiration by spatial nulling, and that the remaining gap to a per-recording oracle can be closed at deployment by label-free test-time adaptation. Crucially, we identify which label-free signal makes this work. Frequency- and variance-based criteria cannot separate an in-band interferer from breathing. Our spatial-redundancy test-time adaptation (SR-TTA), which maximizes consistency across random antenna subsets under an out-of-band spectral veto, preserves benign performance in our tests. The respiration-rate error drops from 5.8 to 0.8 breaths per minute (bpm) under simulated in-band interference, and the pipeline maps onto the Open Radio Access Network (O-RAN) architecture as O-RAN distributed-unit (O-DU) range-gating, an adaptation xApp, and a calibration rApp. On real testbed recordings, a one-time cross-subject calibration plus SR-TTA reduces failures from 47% to 7%, drawing level with the hand-crafted combiner using label-free test-time adaptation.

Closest papers

Nearest neighbours by meaning across the whole index.

Analyzing and Characterizing Multi-Source Interference Effects at Jammertest Norway 2025

eess.SP ·2026-08-16 ·Lucas Heublein, Inigo Cortes Vidal, Tobias Feigl, Alexander Rügamer, Felix Ott
publishedbenchmark similarity 0.58
Abstract · 15 pages, 14 figures

Intentional radio-frequency interference from low-cost GNSS jammers increasingly threatens the accuracy and reliability of satellite-based positioning. Mitigating this threat requires not only detection but also robust waveform classification and characterization, direction-of-arrival inference for localization, and impact estimation on receiver performance under realistic operating conditions; all of which are challenged by strong distribution shifts across devices, sensors, environments, and satellite geometries. We address these challenges by compiling a dedicated real-world dataset recorded during Jammertest 2025 (Andoya, Norway), covering two outdoor test areas with parallel measurements from a single-antenna E1/E5 receiver module and a 2x2 CRPA-array. The dataset spans diverse jamming, spoofing, and meaconing scenarios, including CW, PRN, sweep/chirp, and multi-emitter configurations, and is complemented by per-recording metadata enabling time-aligned ground truth. Methodologically, we benchmark 17 machine learning (ML) architectures for interference-modulation recognition and multi-task characterization (type, occupied bandwidth, and signal strength), and we quantify navigation-relevant degradation via a receiver-aware spectral separation coefficient (SSC) that maps measured spectra to effective (C_s/N_0)_{eff} loss. To enable multi-source analysis, we transfer a YOLOv8s and RF-DETR detector pretrained on a labeled spectrogram dataset to localize multiple simultaneous interferers in GNSS spectrograms and subsequently characterize each detected component. Results show near-99% within-area classification accuracy but substantial cross-area performance drops, highlighting the need for robustness to real-world domain shifts.

0.58

Beyond RSRP: An Exploration of Alternative Metrics for Beam Management in an Urban Micro 5G NR Scenario

eess.SP ·2026-11-17 ·Saakshi Gupta, Tarun S. Cousik, Pratheek Upadhyaya, Nishith Tripathi, Jeffery Reed +1 more
similarity 0.56
Abstract

Reference Signal Received Power (RSRP) is widely used for beam selection in 5G NR as it is an easy indicator of path loss, but is not interference-aware, limiting its effectiveness in dense deployments. In this paper, we explore RSRP, Reference Signal Received Quality (RSRQ), and Signal to Interference-plus-Noise Ratio (SINR) as beam selection metrics alongside three UE-gNB association strategies in a 3GPP-compliant Urban Micro multi-cell simulation, benchmarked against Regularized Zero-Forcing (RZF) full-Channel State Information (CSI) upper bounds. Using a 3GPP-compliant Urban Micro multi-cell simulation benchmarked against RZF full-CSI upper bounds, we demonstrate two findings: directional RSRQ, despite its inter-cell interference awareness, is the worst-performing strategy in symmetric interference, and sequential association outperforms power-optimal Hungarian assignment. We also establish that the residual performance gap to full-CSI precoding stems from codebook quantization rather than metric imperfection, identifying adaptive codebook design as a mechanism to enhance performance.

0.24

Multi-Timescale Context-Aware Radio Resource Optimization for Harmonious NTN-TN Coexistence: A Digital Twin and Open RAN Enabled Framework

cs.NI eess.SP ·2026-10-23 ·Ecem Izde Kaya, Md. Zoheb Hassan, Georges Kaddoum
benchmark similarity 0.54
Abstract · Submitted to IEEE for possible publication

Coexistence between non-terrestrial networks (NTNs) and terrestrial networks (TNs) is essential for future wireless systems, but terrestrial downlink transmissions can generate harmful aggregate interference at low-Earth orbit (LEO) satellite receivers. We present DT-STABLE, an Open Radio Access Network (O-RAN)-enabled, digital twin (DT)-assisted framework for context-aware NTN-TN coexistence. Using site-specific information, the DT estimates interference at LEO satellites, enabling proactive management with reduced real-time measurement overhead. We formulate joint beam activation and user association under RF-chain limits, load balancing, and aggregate satellite interference constraints; prove NP-hardness; and develop an efficient DT-guided scheduling algorithm. DT-STABLE couples short-timescale radio resource adaptation with periodic mid- and long-timescale DT updates through standardized O-RAN interfaces. Site-specific 28 GHz simulations under worst-case satellite geometry and low elevation angles show that DT-STABLE balances rate and interference utility, achieving 89.63% interference-to-noise ratio (INR) satisfaction and a mean sum rate of 210.96 bps/Hz, with nearly 100% INR satisfaction when satellite protection is prioritized. The framework reduces beam measurement overhead by 99.71% relative to exhaustive sweeping and achieves up to 33.1 times lower runtime than the Gurobi-based exact optimization benchmark.

0.29

Wireless Foundation Models: State-of-the-Art and Open Challenges

eess.SP cs.AI ·2026-09-04 ·Alonso M. Pacheco Huachaca, Juan J. Rodriguez Rodriguez, Ahmed Aboulfotouh, Nelson L. S. da Fonseca, Carlos A. Astudillo +1 more
survey similarity 0.54
Abstract

Wireless foundation models (WFMs) have emerged as a promising approach for learning reusable representations from large-scale wireless data and adapting them to downstream tasks. However, the rapidly growing literature remains fragmented across modalities, pretraining objectives, architectures, adaptation strategies, and evaluation protocols, making it difficult to assess progress toward broadly transferable models. This survey provides a systematic analysis of WFMs for physical-layer applications. We first introduce the main WFM design components, including pretraining, backbone architectures, and downstream adaptation. We then organize the literature into five physical-layer task families: signal recognition and demodulation, channel representation learning, RF sensing and localization, beam management, and spectrum sensing and monitoring, while separately examining multi-task PHY models. Across these categories, we analyze how existing models are pretrained, adapted, and evaluated, with particular attention to downstream task diversity and the distinction between in-distribution, partial-shift, and out-of-distribution transfer. Our analysis shows that current WFMs provide increasing evidence of reusable wireless representations, but this evidence varies considerably across task families and evaluation settings. Differences in datasets, modalities, architectures, pretraining objectives, adaptation protocols, and distribution shifts make it difficult to determine which design choices drive transfer and generalization. We conclude by identifying open directions for improving data availability, evaluation rigor, generalization, efficient adaptation, and real-world deployment, providing a unified framework for understanding the current WFM landscape and the requirements for developing more reusable foundation models for future physical-layer wireless systems.

0.20

Seeing Through Sparse Signals: CS-Enhanced Sensing With QoS Guarantees for 6G ISAC

eess.SP ·2026-10-15 ·Yifei Wang, Pradyumna Kumar Bishoyi, Marina Petrova
similarity 0.53
Abstract

In integrated sensing and communication (ISAC) systems, communication and sensing share time-frequency resources, creating a fundamental trade-off between communication quality of service (QoS) and quality of sensing (QoSe). Reusing 5G new radio (NR) reference signals (RSs) enables standard-compliant sensing, but their inherent sparsity leads to undersampled channels and strong sidelobes that degrade weak-target detection. Compressed sensing (CS) can mitigate these effects, yet existing methods either overlook communication QoS constraints or rely on reconstruction algorithms that are step-size-sensitive or employ global thresholding, leading to weak-target masking in multi-target scenarios. The multi-target detection problem, therefore, requires a joint design of resource scheduling and CS-based reconstruction. In this work, we investigate the impact of two scheduling schemes, namely QoS-guaranteed scheduling and proportional-fairness (PF)-based scheduling, on the sensing-communication trade-off. To further enhance sensing performance, we employ a 2D max-median complex approximate message passing (2D-mmCAMP) algorithm that performs adaptive row- and column-wise thresholding to suppress sidelobes while preserving weak-target responses in multi-target scenarios. Simulations demonstrate an improvement of >= 16% in weak-target detection over baseline reconstruction algorithms while meeting downlink (DL) QoS constraints, validating the effectiveness of the proposed NR-compliant ISAC scheme.

0.20

Ghost Target Elimination in 5G Reference Signals ISAC via Multi-static Multilateration

eess.SP ·2026-11-04 ·Ali Al Khansa, Sami Mekki
benchmark similarity 0.53
Abstract

Integrated Sensing and Communication (ISAC) systems can reuse 5G New Radio (NR) reference signals to enable joint communication and environmental sensing. Among these signals, the Positioning Reference Signal (PRS) is particularly suitable for range and Doppler estimation. However, its comb structure introduces periodic ambiguities that generate ghost targets. Existing solutions resolve these ambiguities by combining PRS with additional signals such as the DeModulation Reference Signal (DMRS), which increases sensing overhead. This paper proposes a PRS-only sensing framework that resolves ambiguities using multi-static observations. Instead of removing ghosts locally at each receiver, the proposed method exploits spatial diversity and performs ambiguity resolution at a fusion anchor. The anchor jointly estimates target locations and ambiguity indices via multilateration across multiple sensing nodes. This approach eliminates the need for additional reference signals while maintaining low receiver complexity. Simulation results show that the proposed method reliably resolves ghost targets and achieves superior detection performance compared to benchmark methods across various scenarios, while significantly enhancing resource efficiency by enabling sensing using PRS-only transmissions.

0.34

Budget-Aware Federated Dual-Side Channel Estimation for Hybrid mmWave Massive MIMO

eess.SP ·2026-08-14 ·Jiawei Chen, Ruining Fan, Mouli Chakraborty, Avishek Nag, Anshu Mukherjee
similarity 0.53
Abstract

This work studies communication-constrained federated dual-side channel state information (CSI) estimation in hybrid millimeter-wave (mmWave) massive multiple input multiple output (MIMO) systems. Accurate CSI recovery is challenging because hybrid beamforming yields compressed and noisy observations, while repeated model exchange in federated learning (FL) makes communication efficiency strongly dependent on estimator size. Rather than developing a new federated optimization algorithm, we focus on estimator design under standard federated averaging (FedAvg) and study how to use a limited parameter budget effectively under repeated model exchange. Based on this perspective, we propose a budget-aware recalibrated refinement network (BARRNet), which combines a compact residual backbone with lightweight channel-wise recalibration for dual-side CSI refinement. Simulation results show that BARRNet achieves a better normalized mean squared error (NMSE)--communication tradeoff than the backbone-only control and heavier convolutional neural network (CNN) baselines. At 5 dB SNR, for the -13 dB DL NMSE target, it reduces the cumulative communication required by 28.9\% relative to the architecture-matched backbone-only control. These results indicate that communication-efficient federated CSI estimation depends not only on model compactness, but also on how limited model capacity is used under repeated model exchange.

0.04

Robust Beamforming and Power Allocation for Coherent Cell-Free Massive MIMO with Residual Calibration Errors

eess.SP ·2026-08-11 ·Mingjun Sun, Xidong Mu, Shaochuan Wu, Chongjun Ouyang, Hyundong Shin
similarity 0.53
Abstract

This paper investigates robust downlink transmission to tolerate calibration aging in time-division duplex cell-free massive multiple-input multiple-output (CF-mMIMO) systems with residual calibration errors (RCEs). Unlike existing studies that typically treat RCEs as static impairments, we develop a time-evolving RCE model that characterizes the joint effects of residual phase mismatches, residual carrier frequency offsets, and oscillator phase noise. Based on this model, two practical processing architectures are considered: instantaneous calibrated-channel-based robust beamforming (BF) and statistical beamformed-channel-based robust power allocation (PA). For both architectures, tractable achievable rate lower bounds are derived, which explicitly reveal the impact of calibration aging on coherent combining, BF-gain uncertainty, and inter-user interference. Using these lower bounds as design metrics, we formulate an effective weighted sum-rate (EWSR) maximization problem over the data transmission interval, so that the resulting BF and PA designs can account for the temporal evolution of RCEs rather than a single calibrated instant. To efficiently solve the resulting problems, a Gauss--Legendre quadrature-based weighted minimum mean square error (WMMSE) optimization framework is developed, where both robust BF and PA are updated in an access point (AP)-block manner with closed-form solutions under per-AP power constraints. Simulation results demonstrate that: i) the proposed algorithms exhibit stable convergence; ii) the proposed robust BF and PA schemes achieve higher EWSR by explicitly accounting for calibration aging than their non-robust counterparts; and iii) robust BF achieves higher spectral efficiency (SE), whereas robust PA provides a more favorable tradeoff between SE and implementation cost in terms of computational complexity and fronthaul overhead.

0.04