CS Paper Radar

Localization in Multi-Panel Massive MIMO With Clock Asynchronism: A Unified Approach

Yuhao Zhang, Guangjin Pan, Musa Furkan Keskin, Carmen D'Andrea, Stefano Buzzi, Henk Wymeersch

eess.SP cs.IT ·submitted 2026-10-08 15:44 UTC · v1
published

Abstract

In this work, we propose a unified localization framework, termed UNILocMP, that combines model-based geometry and channel charting (CC) for multi-panel massive multiple-input-multiple-output (MIMO) under clock asynchronism. Owing to the multi-panel architecture, users are classified into multi-line-of-sight (LoS) users, which maintain LoS links with at least two panels, and single/non-LoS users, which maintain a LoS link with only one panel or with none of the panels. For multi-LoS users, a joint position and clock bias estimation is developed; while for single/non-LoS users, an unsupervised CC model is trained with a two-stage data augmentation strategy, where a clock-bias aware dissimilarity metric is introduced. It is numerically validated that the proposed UNILocMP outperforms model-based and CC-based baselines and achieves acceptable performance compared with fully-supervised fingerprinting. Moreover, for a fixed total number of antennas, the multi-panel architecture significantly improves localization accuracy and robustness compared with a single-panel base station (BS) deployment, particularly in the presence of clock asynchronism.

Comment
Accepted to IEEE Globecom Workshops (GC Wkshps) 2026

Closest papers

Nearest neighbours by meaning across the whole index.

Masked Latent Prediction of CSI for Indoor Localization in Integrated Sensing and Communication Systems

eess.SP ·2026-09-08 ·Ibtissam Labriji, Mahdi Maleki, Pavan Koteshwar Srinath
similarity 0.60
Abstract · Submitted to IEEE ISAC 2026. 4 figures

Channel State Information (CSI)-based fingerprinting can enable accurate indoor localization but suffers from domain shift, limited labeled data, and degraded performance in multipath-rich environments. To address these challenges, we propose a self-supervised localization framework built on a Joint Embedding Predictive Architecture (JEPA). Each CSI time snapshot is treated as a token, and the encoder is pre-trained by predicting the latent embeddings of masked snapshots from the visible ones, learning robust channel representations without any labels. The encoder is then frozen, and only a lightweight regression head is trained on a small set of labeled positions to estimate the user location. We evaluate the framework on the measured DICHASUS-005x dataset, a single-antenna transmitter received by a 32-antenna array in a multipath-rich indoor environment. With a 50% masking ratio, the proposed method reduces the mean localization error from 0.90 m to 0.42 m (a 53% reduction, or 0.48 m) relative to a supervised Convolutional Neural Network (CNN) baseline trained on raw CSI. Owing to its label-efficient, frozen-encoder design, the framework aligns with integrated sensing and communication (ISAC) objectives, enabling reliable sensing with minimal labeling and compute overhead.

0.13

ChronoChart: Setup-Agnostic Channel Charting for Label-Free Indoor Localization

eess.SP cs.LG ·2026-10-18 ·Majid Sharghi Foroushani, Jonas Pirkl, Jonathan Ott, Maximilian Stahlke, George Yammine +2 more
published similarity 0.60
Abstract · To be published in the proceedings of the 16th International Conference on Indoor Positioning and Indoor Navigation (IPIN)

Accurate radio-based indoor localization remains challenging in multipath-rich and dynamic indoor environments. Supervised fingerprinting methods achieve high positioning accuracy by learning mappings from radio channel measurements to physical locations, but require costly position labels and frequent recalibration. Channel Charting (CC) addresses this limitation by learning low-dimensional representations of Channel State Information (CSI) without position labels, yielding channel charts in which nearby points correspond to nearby physical locations. However, prominent CC methods rely on setup-specific dissimilarity metrics, such as ADP-, CIRA-, or PDR-based distances, and on precomputed $O(n^2)$ distance matrices, limiting scalability and transferability across radio systems. We propose ChronoChart, a timestamp-supervised CC framework that requires only CSI and timestamps without prior knowledge for training. Our method jointly optimizes complementary objectives: a triplet loss using temporally derived positive and negative samples to establish coarse global structure, a temporal-proximity loss that promotes smooth trajectories in the chart, and a joint-embedding loss that enforces consistency between representations of different augmentations. Evaluated on real-world 5G, MIMO, and passive UWB data, our method matches or exceeds prior CC baselines that depend on tailored distance metrics, and remains scalable and applicable across heterogeneous radio systems.

0.22

Joint Localization and Data Detection in Ambient Backscatter Communications: Uncertainty-Preserving Inference and Cross-Frame Geometry Consensus

eess.SP ·2026-09-29 ·Xianhua Yu, Dong Li, Bowen Gu, Tianhao Liang, Tingting Zhang
similarity 0.59
Abstract

We address joint continuous localization and data detection in ambient backscatter communication, where weak observations can leave competing geometry hypotheses plausible and a staged point-estimate interface can discard information about this ambiguity. We develop the \emph{Geometry-aware Frame Network (GeoFrameNet)}, which projects channel frequency responses onto a physics-derived delay--angle-of-arrival lattice and aggregates sign-robust evidence across orthogonal frequency-division multiplexing symbols to form a shared geometry posterior over physically feasible candidates. Localization uses the full posterior with candidate-specific refinement; detection combines candidate-conditioned differential logits using posterior weights renormalized over selected candidates. Bit supervision guides geometry scoring. For a fixed device, the \emph{Cross-Frame Geometry Consensus Network (CFGC-Net)} fuses frozen GeoFrameNet candidate logits and features across frames for localization while preserving frame-wise detection outputs. On an independent test set, GeoFrameNet achieves lower localization root-mean-square error (RMSE) than an all-symbol multiple-measurement-vector sparse Bayesian learning (MMV-SBL) baseline at all eight evaluated signal-to-noise ratio (SNR) points, with simultaneous bit error rate and RMSE reductions from $-30$ to $-22.5$~dB. At $-30$~dB SNR, the respective RMSEs are 3.1573 and 18.8859~m. CFGC-Net achieves the lowest aggregate RMSE among the evaluated fusion strategies for two, four, and eight frames.

0.24

Training-Efficient Channel Estimation for the Multiuser Uplink Relying on Generalized Flexible Intelligent Metasurfaces

eess.SP ·2026-10-21 ·Daniel C. Araújo, André L. F. de Almeida, Lajos Hanzo
similarity 0.58
Abstract

We consider uplink multiuser channel estimation for a generalized flexible intelligent metasurface at the base station, under narrowband far-field propagation and a twin-time-scale mechanical protocol: on the slow time-scale the panel translates rigidly over a planar grid, while on the fast time-scale the surface morphs along its normal direction. From orthogonal multiuser pilots, we show that each user's channel admits a fourth-order canonical polyadic tensor structure. We develop two complementary estimators: alternating least squares factorization followed by paired rotational-invariance wavevector extraction, and a tensor spatial-smoothing multiple signal classification estimator that preserves the multilinear array manifold. Both share a minimum description length front-end for automatic tensor-rank detection. We derive Kruskal identifiability conditions that relate the numbers of elements, morphing states and grid positions to the maximum number of recoverable multipath components, and show that the tensor model reconstructs the channel at panel configurations beyond the training grid. This prediction capability drives a configuration-selective multiuser transmit precoder that searches the entire motion grid without additional pilot overhead. Numerical results confirm the identifiability limits and show that, once the model order is resolved, the configuration search makes the same choice from estimated as from perfect channel state information. The reconfiguration gain over a fixed panel of identical aperture and training budget grows with the user load, and fast morphing proves valuable for conditioning the tensor factorization rather than as a source of beamforming gain.

0.27

Digital Twin-Guided Wireless Localization via Probabilistic Inverse Learning

cs.IT eess.SP ·2026-10-27 ·Mahmoud Saad Abouamer, Henrik C. M. Frederiksen, Robin J. Williams, Shashi Raj Pandey, Petar Popovski
similarity 0.58
Abstract

This work investigates how site-specific digital twins (DTs) can support wireless localization using simplified distributed infrastructure. We propose PRISM (Probabilistic Refinement using Inverse learning and a Site-specific Model), a DT-guided probabilistic localization scheme with single-antenna access points (APs). Localization is formulated as a probabilistic inverse problem in which a conditional proposal distribution over UE locations is learned from multi-node channel impulse responses (CIRs). The proposal generates candidate locations, with its spread regularized during training and DT consistency used to reweight candidates and refine the estimate at inference. The DT serves as an approximate forward-consistency model, avoiding assumptions of exact channel fidelity or differentiability with respect to user position. Numerical experiments demonstrate gains over data-driven and classical fingerprinting benchmarks, while achieving a median error of approximately $0.7$ m using 10 single-antenna APs. Without retraining, PRISM remains effective under degraded inference-time DT features. PRISM also yields uncertainty estimates from its proposal covariance, with empirical $χ^2$ calibration approaching ideal behavior as APs increase.

0.32

Ray-Traced Augmentation for Signal Strength Based Localization

cs.NI ·2026-08-24 ·Jihoon Og, Ningze Sun, Ioanis Nikolaidis, Omid Ardakanian
similarity 0.58
Abstract · 28 pages

Indoor localization based on Wi-Fi typically relies on extensive collection of real-world received signal strength (RSS) fingerprints, making deployment costly and time-consuming. We present a ray-tracing-based framework that reduces this reliance by generating synthetic RSS fingerprints from a building model. We first calibrate the building model using a small amount of real RSS fingerprints through Bayesian optimization, followed by per-access-point calibration to account for residual errors in simulated RSS values. The calibrated model is then used to generate a large augmented dataset of synthetic RSS fingerprints at arbitrary locations. To effectively exploit these data for localization, we introduce novel binary and multivalued representations of RSS values and a ResNet-based localization architecture that supports cross-band fusion of 2.4 and 5 GHz measurements. We evaluate our localization method on a real campus building against a diverse set of four baselines. When trained exclusively on synthetic data, the proposed method with multivalued representation and upstream cross-band fusion achieves a mean localization error of 3.05m on a real-data test set, outperforming the best baseline by 33.6%. The results demonstrate that calibrated ray-tracing-based simulation can substantially reduce the need for real RSS fingerprints while enabling accurate deep-learning-based indoor localization.

0.13

Mean Spatial Frequency Decoupling for Learning-Based Uplink-to-Downlink Covariance Conversion in FDD Massive MIMO

eess.SP cs.LG ·2026-09-30 ·Melih Can Zerin
benchmark similarity 0.57
Abstract

In frequency division duplexing (FDD) massive multiple-input multiple-output (MIMO) systems, the uplink (UL)-to-downlink (DL) channel covariance matrix (CCM) conversion problem is studied to relieve the heavy burden of DL training and feedback required for channel estimation. Learning- based methods perform well up to a certain array size, but for a fixed dataset size their accuracy deteriorates with the number of antennas, to the point where simple model-based methods outperform them. This paper identifies a key cause of this behavior and addresses it. The mean angle of arrival (AoA) induces a phase ramp along the lags of the CCM. Since the oscillation rate of this ramp grows with the number of antennas, a dataset of fixed size becomes increasingly sparse relative to the variation that must be captured. We propose estimating the slope of this ramp from the UL CCM separately and mapping it to the DL band in closed form, leaving the learner with a residual that is largely insensitive to the mean AoA, which substantially reduces the performance degradation with an increasing number of antennas. The proposed scheme, termed deramping, is a combination of pre- and post-processing steps that applies to learning-based conversion methods without altering their internal structure, as demonstrated on three structurally different learners. Simulation results show that deramping reduces the covariance estimation error of all three learners under uniform, Laplacian, and Gaussian angular power spectra,keeps the interpolation-based learners ahead of a model-based benchmark at large array sizes, and improves downlink channel estimation.

0.21

RUN-O-RAN: An O-RAN-Native Architecture Enabling Cooperative Uplink Localization

cs.NI ·2026-09-17 ·Viola Bernazzoli, Alberto Ceresoli, Ilario Filippini
similarity 0.57
Abstract · 14 pages, 13 figures

Accurate positioning is increasingly required in indoor and dense urban environments; nonetheless, satellite-based systems are not always available, and standardized 5G localization solutions remain difficult to deploy with commercial devices. This paper presents RUN-O-RAN, an O-RAN-native framework that enables network-centric uplink localization using standard Sounding Reference Signal (SRS) transmissions from commercial 5G devices. RUN-O-RAN xApp coordinates serving and neighboring base stations, enabling non-serving base stations to retrieve SRS-based uplink timing measurements that would be unavailable in conventional RAN deployments, without modifying the UE or existing 3GPP signaling procedures. The framework combines cooperative SRS collection, first-path time-of-arrival estimation, timing-advance tracking, clock-drift compensation, and multi-anchor position estimation into a complete network-side localization service. Experimental evaluation over $150,000$ SRS transmissions validates the proposed framework, achieving meter-level localization under diverse propagation conditions while revealing the impact of anchor geometry and multipath on positioning accuracy. These findings demonstrate that cooperative SRS-based localization can be realized within the O-RAN ecosystem without modifying commercial UEs, providing a practical foundation for future network-native ISAC positioning services.

0.23