CS Paper Radar

CKM-Based Predictive Beamforming for Energy-Efficient Mobile Tracking in ISCAP System

Maryam Asadi-Ahmadabadi, S. Mohammad Razavizadeh, Vahid Jamali

eess.SP ·submitted 2026-10-10 17:07 UTC · v1

Abstract

This paper proposes a channel-knowledge-map (CKM)-based predictive beamforming framework for integrated sensing, communication, and powering (ISCAP) of a mobile energy-constrained node in non-line-of-sight (NLoS) multipath environments. The CKM provides location-dependent channel information for both predictive beamforming and EKF-based tracking, while resolved path parameters estimated from the sensing echoes are used as observations. Based on the predicted node location, the transmit covariance and power-splitting ratio are jointly optimized to maximize wireless power-transfer efficiency subject to communication, sensing, transmit-power, and tracking-quality constraints. A finite-battery model and an adaptive inter-frame energy-management policy are further introduced to balance decoding energy consumption and battery preservation. The resulting non-convex fractional problem is solved using Dinkelbach's method, alternating optimization, and semidefinite relaxation. Numerical results show that the proposed framework maintains reliable tracking, satisfies the prescribed position-uncertainty requirement, achieves near-oracle wireless power-transfer performance after the initial tracking transient, and preserves more battery energy while meeting the required communication quality of service.

Closest papers

Nearest neighbours by meaning across the whole index.

Hybrid STAR-RIS Architecture for Joint Localization, Communication, and Power Transfer

eess.SP ·2026-08-12 ·Haoran Ni, Mohammadali Mohammadi, Xidong Mu, Hien Quoc Ngo, Michail Matthaiou
top venue similarity 0.61
Abstract · Accepted for publication in IEEE Transactions on Wireless Communications, Aug. 2026

We propose a hybrid simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) architecture with dynamically switched active and passive elements to support joint localization, communication, and wireless power transfer (WPT). We first pursue a parallel factor analysis with the alternating least squares (PARAFAC-ALS)-based tensor decomposition approach that decouples the base station (BS)-reconfigurable intelligent surface (RIS) and RIS-user channels, thereby enabling low-overhead channel acquisition. Based on this, we formulate a system energy efficiency (EE) maximization problem, subject to the spectral efficiency (SE) requirements of communication users, sensing signal-to-interference-plus-noise ratio constraints, and the nonlinear energy harvesting requirements of energy-harvesting users. The optimization problem is nonconvex since the transmit power allocation, STAR-RIS coefficients, and active/passive mode assignments are tightly coupled in both the objective and constraints. We address this issue by alternating between two subproblems, and solving them via fractional programming, successive convex approximation and a multi-seed greedy strategy employed as an initialization step. Numerical results demonstrate that selectively activating a small, well-chosen subset of STAR-RIS elements achieves 1.5 to 3 times EE improvements compared with fully passive/active architectures, while satisfying communication, sensing, and power-transfer requirements.

0.63

Toward Reliable and Accurate Predictive ISAC in Mobile mmWave Networks

eess.SP ·2026-09-24 ·Atefeh Rezaei, Vahid Jamali, Falko Dressler
similarity 0.60
Abstract

Integrated sensing and communications (ISAC) systems offer a promising framework for beam tracking, which enhances channel awareness and improves communication reliability in mobile millimeter wave (mmWave) networks. Motivated by this, we propose a low-complexity, model-driven channel state information (CSI) framework with integrated channel prediction capability in ISAC-enabled systems. To reduce the overhead of CSI acquisition and uplink feedback, the proposed framework leverages predicted target sensing parameters to construct partial CSI from both line-of-sight (LoS) and detected non-line-of-sight (NLoS) components. Exploiting this partial CSI, we formulate a beamforming optimization problem that minimizes the worst targets' Cramér-Rao bound (CRB) under per-user communication constraints. This problem is non-convex and highly non-linear; therefore, we develop an efficient suboptimal solution using successive convex approximation (SCA) and Schur-complement-based decomposition techniques, and we evaluate its complexity in comparison with other approaches. Moreover, since obtaining the absolute phase of the channel paths may require additional pilot resources, we formulate a robust beamforming design that does not assume this knowledge, and propose a solution based on sample averaging. Numerical results demonstrate that the ISAC-based robust channel prediction and localization framework significantly improves prediction accuracy and link reliability compared with conventional schemes, such as communication-based localization and tracking and separated sensing and communication. These results highlight the potential of ISAC for reliable, adaptive, and high-frequency, blockage-prone wireless networks. Furthermore, the performance of the proposed framework is evaluated under severe blockage scenarios, which further demonstrates enhanced network reliability.

0.16

Resilience in Wireless: A Lyapunov-Constrained Integrated Sensing, Communication, and Control Approach

eess.SP ·2026-10-23 ·Yifan Ge, Ningyan Guo, Yuanhao Cui, Dingyou Ma, Zhiyong Feng +1 more
similarity 0.58
Abstract · 13 pages

Traditional wireless networks mainly use reliability metrics to evaluate network stability. However, reliable data delivery alone cannot fully characterize network stability under variations in wireless environments and physical tasks. Wireless network resilience provides a broader perspective by describing the ability to maintain acceptable service and recover from disruptions. We develop an integrated sensing, communication, and control (ISCC) framework that incorporates communication reliability and sensing error into a state-dependent Lyapunov constraint for adaptive BS beamforming. The resulting transmit-power minimization problem is non-convex and solved via semidefinite relaxation and successive convex approximation with rank-one recovery. We establish conditional mean-square ultimate boundedness, while simulations demonstrate improved resilience and faster recovery over a static baseline.

0.25

Energy-Efficient Waveform Design for ISAC Systems: An Ambiguity-Domain QoS Perspective

eess.SP ·2026-09-04 ·Ngoc-Son Duong, Trung-Hieu Nguyen, Quang-Truong Can
published similarity 0.58
Abstract · accepted at APSIPA ASC 2026

Integrated sensing and communication (ISAC) requires transmit waveforms that simultaneously preserve communication quality, provide reliable sensing, and remain compatible with practical radio-frequency front ends. This paper considers a discrete-time ISAC waveform design problem that minimizes transmit power from the perspective of a novel metric termed the ambiguity-domain sensing signal-to-interference-plus-noise ratio (AF-SINR). The proposed AF-SINR quantifies the ratio between the desired ambiguity-function mainlobe power and the weighted aggregate sidelobe leakage plus noise within a local delay-Doppler region of interest, thereby providing a localized and noise-aware sensing-QoS measure. To enable ISAC operation, the waveform is further required to satisfy per-user effective communication-SINR constraints, while a peak-to-average power ratio (PAPR) constraint is imposed to facilitate practical implementation. The resulting energy-minimization problem is nonconvex due to the fractional QoS expressions, quartic ambiguity terms, and waveform-dependent PAPR constraint. To address this challenge, we propose a fractional-programming successive-convex-approximation (FP-SCA) algorithm. Simulation results verify that the proposed method satisfies all requirements while preserving localized ambiguity suppression over the local delay-Doppler region.

0.23

Joint Movement and Compression Ratio Design for Mobile Embodied AI Networks (MEAN)

cs.IT cs.LG ·2026-10-01 ·Yahao Ding, Jiaxiang Wang, Zhouxiang Zhao, Zhaohui Yang, Mingzhe Chen +1 more
similarity 0.55
Abstract · 6 pages, 4 figures, conference

Mobile embodied AI networks (MEAN) enable embodied agents to perceive, reason, communicate, and act in wireless environments. In such networks, agent mobility can improve channel conditions, while semantic compression can reduce transmission payloads. However, movement consumes energy, and stronger compression incurs additional computational cost. This paper studies joint movement, semantic compression, and transmit power design for an uplink MEAN system. We formulate a max-min energy efficiency (EE) problem by jointly optimizing transmit power, movement distance, and semantic compression ratio under controllable power constraints. The problem is non-convex due to the coupled signal-to-interference-plus-noise ratio (SINR), mobility-dependent channel gains, and fractional EE objective. To solve it, we propose an alternating optimization (AO)-Dinkelbach algorithm, where the fractional objective is handled by the Dinkelbach transformation, transmit power is updated via successive convex approximation (SCA), and movement distance is updated by coordinate-wise grid search. Simulation results show that the proposed scheme outperforms no-mobility and no-compression baselines, demonstrating the benefit of jointly exploiting mobility control, semantic compression, and power allocation in MEAN.

0.20

Joint Beamforming and Phase Shifts Design for RIS-Enabled RSMA-ISAC Systems

cs.IT ·2026-08-19 ·Xuejun Cheng, Qian Zhang, Yuhui Jiao, Yufei Zhao, Zheng Dong +1 more
published similarity 0.55
Abstract

This paper investigates the sensing-centric design of reconfigurable intelligent surface (RIS)-enabled rate-splitting multiple access-integrated sensing and communication (RSMA-ISAC) systems. Specifically, we propose a new beam-gain approximation method to enhance the sensing beam gain while satisfying communication quality-of-service (QoS) constraints.Since the joint optimization of the beamforming vectors and RIS phase shifts is highly coupled and non-convex, existing methods typically rely on generic optimization solvers involving substantial computational complexity. To address this issue, we propose an efficient constraints-separation-based alternating optimization algorithm (CS-AO). Our proposed algorithm effectively decouples the optimization variables and yields closed-form solutions for all subproblems, thereby significantly reducing the computational burden. Simulation results show that the proposed algorithm achieves sensing beam-gain performance comparable to successive convex approximation (SCA) and semidefinite relaxation (SDR) benchmarks, while achieving more than 120-fold and 50-fold runtime reductions. In addition, compared with conventional space-division multiple access (SDMA) schemes, the proposed design exhibits substantial sensing beam gain.

0.56

Physics-Informed Unsupervised Learning for Reliable Beamforming in Cluttered MIMO-ISAC

eess.SP ·2026-10-10 ·Yosefine Triwidyastuti, Nghia Thinh Nguyen, Tri Nhu Do
similarity 0.54
Abstract

In this paper, we consider joint beamforming and power allocation for a mobile multiuser MIMO integrated sensing and communication (ISAC) network with clutter, residual self-interference, and outdated channel state information, under per-user rate and sensing signal-to-interference-plus-noise ratio (SINR) constraints that must hold on every realization. The design must be recomputed every block, and distant or weak targets can make the sensing constraint unmeetable. We propose a physics-informed unsupervised learning (PI-UnSL) network that corrects the analytical design, meets the power and norm constraints exactly by construction, and is conditioned on closed-form interference statistics, spanning the whole tradeoff in one pass. We derive a closed-form sensing SINR at the interference-aware combiner, yielding a necessary range-radar-cross-section-power condition and a priority-independent analytic violation floor, so the problem is intermittently infeasible. We then show that a dual targeting below the attainable floor has no fixed point, and calibrate the label-free objective against the measured floor. Numerical results confirm the floor and the bounded calibrated dual, and show that PI-UnSL substantially raises per-realization joint quality of service over the closed-form baseline, delivers more rate than time-division ISAC at matched detection over most of the tradeoff, and exceeds the reliability of an uncalibrated alternating-optimization solver at a fraction of its latency. More broadly, the physical knowledge given to the network, not its architecture, makes such problems learnable without labels: five architectures fail alike from scratch and perform alike when started from the closed-form design and conditioned on its interference statistics.

0.22

Prediction-Aware Structured Resource Control for Partitioned IRS-Assisted Mobile IoT Uplinks With Semi-Blind Cascaded-Channel Acquisition

eess.SP eess.SY ·2026-09-22 ·Hediyeh Soltanizadeh, Ardavan Rahimian
similarity 0.54
Abstract

Intelligent reflecting surface (IRS)-assisted mobile Internet of Things uplinks require joint control of channel aging, costly cascaded channel state information (CSI) acquisition, and coupled IRS/radio resources. This investigation develops a unified prediction-aware deterministic framework for partitioned IRS-assisted massive multiple-input multiple-output (mMIMO) uplinks. Direct channels are recursively tracked, whereas cascaded channels are selectively refreshed by differential semi-blind acquisition reusing the same unknown data block across a minimum-reflection baseline and DFT-coded IRS states. Moreover, finite-block acquisition covariances initialize reduced-order beam-domain prediction, which propagates only unit-beam means online and retrieves age-dependent covariances from precomputed tables. A mixed-integer nonconvex formulation captures net throughput, fairness, outage, uncertainty, switching cost, and sliding-window IRS service. The causal controller integrates covariance-floor actionability, feasible equal-size granularity, residual-feasible ownership, isolated-beam one-sweep refinement, same-block fresh-payload accounting, and service-first allocation using recomputed uncertainty-aware ZF rates and bidirectional receiver-consistent risk. Analysis establishes service-feasibility preservation, effective-channel error bounds, distribution-free reliability, and polynomial online scaling. In unseen environments, the predicted acquisition floor matches the practical semi-blind error, actionable recalibration reduces the mean recalibration rate by 31.5%, and IRS-assisted control achieves a 14.09% mean net-rate gain over direct-only transmission. Receiver-consistent allocation improves realized rate, while ablations support equal-size partitioning and single-sweep refinement; zero post-action service violations occur under nominal, mobility, and load-stress conditions.

0.36