CS Paper Radar

Constraint-Decomposed Impedance Control from Generative Policy for Articulated Object Manipulation

Kyungseo Park, Byeongdo Lim, Jungbin Lim, Minseok Choi, Frank C. Park

cs.RO ·submitted 2026-10-12 07:40 UTC · v1
publishedcode/data

Abstract

Articulated object manipulation tasks such as opening doors, tightening bolts, and pulling drawers impose kinematic constraints on a robot end-effector's motion that neural policies may fail to satisfy. Unlike hybrid force-position control that strictly separates force and position control into orthogonal subspaces, impedance control modulates a mechanical impedance system in the form of a virtual inertia, damping, and stiffness. However, selecting task-appropriate impedance gains remains challenging for robot policies. In this paper, we address this problem for the case of manipulating articulated objects. Our constraint-decomposed impedance control method uses the sampling diversity of a generative policy to estimate the feasible motion directions in twist space. The key idea is to infer the feasible and constrained subspaces of twists from an ensemble of trajectories generated by the policy from the same observation. Principal component analysis (PCA) of the end-effector twists determines the feasible twist subspace, which is then used to form 6x6 impedance gain matrices. For many common articulated objects, the feasible twist subspace is independent of the object configuration, so the subspace and resulting gains are estimated once and held fixed during manipulation, minimizing computational overhead. For less common cases where this independence does not hold, we instead estimate a configuration-independent twist subspace of higher dimension that contains the local feasible subspaces, allowing the same fixed-gain strategy to be used. Experiments across simulated and real-world single- and multi-DoF objects show that the proposed method consistently reduces constraint-violating contact loads relative to isotropic impedance control while maintaining task execution.

Comment
Accepted to the 10th Conference on Robot Learning (CoRL 2026), Spotlight. Please cite the CoRL 2026 (PMLR) version. Project page: https://erickun0125.github.io/constraint-decomposed-impedance/

Closest papers

Nearest neighbours by meaning across the whole index.

ImpedanceMimic: Learned Impedance as Action Space for Force-Accurate Motion Imitation

cs.RO cs.GRcs.LG ·2026-11-14 ·Matthias Jammot, Pembe Gizem Özdil
code/data similarity 0.69
Abstract · 39 pages, 13 figures, 28 tables. Project page: https://impedancemimic.github.io/ImpedanceMimic/

Recovering the forces behind a motion is ill-posed: different controllers can reproduce the same movement while generating different contact forces. Physics-based motion imitation resolves this ambiguity through simulation, but relies on fixed-gain proportional-derivative (PD) control. We show that fixed gains impose a trade-off between motion and force tracking, as contact and swing place conflicting demands on joint stiffness and damping. We introduce ImpedanceMimic, a reinforcement-learning policy that modulates per-joint stiffness, damping, and position setpoints from motion and force measurements, but requires only motion at inference. Across 129 participants and six activities, ImpedanceMimic outperforms matched fixed-gain PD under every integration scheme, direct-torque, muscle-actuated and existing imitation controllers in kinematic and force fidelity, approaching a dedicated motion-to-force regressor. By expressing gains as multiples of inertia-scaled priors, a single policy controls subject-specific biomechanical models without explicit anthropometric input and transfers zero-shot to unseen humans and a humanoid robot. The learned impedance forms a low-dimensional representation of motor state, shared across bodies, that generalizes to withheld activities: stiffness scales with load, and damping anticipates unloading.

0.17

Imp-ACT: Adaptive Impedance Control and Action Chunking with Transformers to Learn Contact-Rich Manipulation from Demonstrations

cs.RO ·2026-09-25 ·Luca Zanetti, Doganay Sirintuna, Idil Ozdamar, Pietro Balatti, Heng Zhang +1 more
similarity 0.68
Abstract · 9 pages, 5 figures, submitted to IEEE International Conference on Robotics & Automation 2027, for associated video see https://youtu.be/iAu_…

Contact-rich manipulation requires robots to balance accurate motion tracking with compliant interaction, yet most visual-action policies leave compliance fixed at the controller level. We present Imp-ACT, a methodologically grounded and practical approach to incorporating direction-dependent Cartesian stiffness modulation directly into demonstration collection, without manual stiffness selection or offline target reconstruction. During teleoperation, a self-tuning impedance controller adapts stiffness along the instantaneous direction of motion while maintaining compliance in orthogonal directions. The adapted stiffness is applied and recorded alongside visual observations and motion commands, capturing motion and compliance under the same dynamics. We implement this pipeline using Action Chunking with Transformer (ACT) to predict end-effector pose, gripper action, and motion-direction stiffness from visual, proprioceptive, and wrench observations. The performance of Imp-ACT is evaluated on wiping and plug insertion using both success rate and quantitative measures of contact behavior. Compared with fixed low- and high-stiffness baselines, Imp-ACT achieves comparable or higher success while maintaining low interaction forces. In wiping, it reduces contact-force vibration by approximately $29\times$ relative to the compliant baseline and $180\times$ relative to the stiff baseline. In plug insertion, it reduces forces orthogonal to the insertion direction by $43\%$ relative to the better fixed-stiffness baseline. These results highlight the benefit of maintaining sufficient stiffness along the direction needed for task execution while preserving compliance in other directions to limit contact forces and accommodate environmental constraints.

0.32

Generative Action-Chunk Sampling for Adaptive Stiffness Control in Physical Human-Robot Collaboration

cs.RO cs.AIcs.LG ·2026-08-26 ·Aoi Otake, Ferdinand Hartmann, Ko Igari, Shingo Murata
similarity 0.67
Abstract · Preprint version

Physical human-robot collaboration requires a robot to provide assistance when human intention is clear while remaining compliant when several future motions are plausible. We present an adaptive stiffness framework based on generative action-chunk sampling. Conditioned on an RGB image and external joint-torque estimates, the policy samples multiple latent variables from an observation-conditioned prior and decodes them into future action chunks. Variation among the sampled action chunks is used to continuously adapt joint stiffness and damping. Greater variation makes the robot more compliant to facilitate human guidance, whereas lower variation provides firmer assistance. In a real-world collaborative transport task with four possible directions, the proposed method achieved an average success rate of 0.95, compared with 0.83 for a fixed-stiffness ablation and 0.69 for a deterministic baseline. Near direction determination, variation among the sampled action chunks increased, and the controller reduced stiffness accordingly. These results suggest that variation among actions sampled by a generative policy can serve as an online control signal for balancing assistance and compliance in physical human-robot interaction.

0.11

UniReflex: Plug-and-Play Force Control for Pretrained Generative Policies via Fast-Slow Reflex

cs.RO ·2026-08-18 ·Yan Huang, Shoujie Li, Ziwu Song, Wenbo Ding
highly cited similarity 0.65
Abstract

Generative imitation learning policies excel at trajectory planning but lack closed-loop force regulation, while directly incorporating force modalities often requires redesigning or retraining the network. We present UniReflex, a universal plug-and-play framework that equips frozen generative policies with variable impedance control (VIC) for contact regulation, guided by force-direction intent collected during demonstration, without further slow-backbone fine-tuning. By non-invasively intercepting deep latent representations from the action head, UniReflex drives a fast reflex network that decouples active force exertion from external interaction response. This scheme predicts normalized anisotropic stiffness directions for directional compliance allocation. Furthermore, UniReflex integrates an adaptive gating mechanism that enables seamless transitions between position-dominant planning and force-dominant execution. Real-world bimanual experiments demonstrate that UniReflex significantly improves contact stability and success rates while preserving original position accuracy. Our approach achieves 25-66x lower per-step backward latency relative to joint training strategies on the evaluated backbones.

0.48

ArtManip: Category-Level Articulated In-Hand Manipulation

cs.RO ·2026-09-11 ·Yang Yang, Tengyu Liu, Puhao Li, Zeyuan Chen, Yuyang Li +4 more
similarity 0.65
Abstract

Category-level in-hand manipulation of articulated objects is a formidable yet underexplored challenge for dexterous robotic hands. This difficulty stems from two core bottlenecks: first, controlling an object's internal degrees of freedom is tightly coupled with maintaining grasp stability on a free-floating base; second, acquiring diverse object models and functional grasps at scale is highly labor-intensive, yet vital for generalization given the system's sensitivity to initial configurations. In this work, we present ArtManip, the first category-level articulated in-hand manipulation method that generalizes across object instances and diverse initial grasps. For initial configuration construction, we develop an automated pipeline that procedurally generates diverse articulated objects and synthesizes task-oriented functional grasps. For policy learning, we propose a robust two-stage training strategy that incorporates articulation physics randomization, reward curriculum, and latent representation distillation to handle complex contact and joint dynamics during deployment. Extensive experiments across four object categories demonstrate that our policy generalizes to unseen instances and varied configurations in simulation, and achieves zero-shot transfer to 12 real-world objects featuring diverse shapes and joint mechanics.

0.40

ForwardDLO: Model-Based Bimanual Shape Matching of Unconstrained Deformable Linear Objects

cs.RO ·2026-09-16 ·Tim Missal, Berk Guler, Lucas Domingues, Simon Manschitz, Jan Peters +1 more
dataset similarity 0.65
Abstract · 8 pages, 5 figures

Ropes, cables, and other deformable linear objects appear in tasks from untangling to cable routing and suturing, yet controlling their shape remains a challenge in robot manipulation. We study model-based shape control in a general setting: the object lies unfixated on a support surface and two arms may grasp and move it anywhere along its length. Because each arm chooses a grasp point, direction, and magnitude, the joint action space is combinatorially large, and the dynamics model's per-prediction cost bounds how much of it a planner can search. We present ForwardDLO, a recurrent latent dynamics model for this unfixated bimanual setting that predicts per-segment displacements grounded in the observed rope state at every step. Our model reaches accuracy comparable to more expensive baselines while containing no explicit segment-to-segment operations, which makes batched evaluation of candidate actions cheap. On open-loop prediction of real rope motion it reaches the lowest error of the learned models we evaluate, 13% below the strongest baseline. Within a fixed time budget it scores 8 to 22 times more candidate actions than models of comparable accuracy while matching them in real-world shape matching; and on a simulated routing task at a 30Hz control rate, this throughput converts into 98% task success versus at most 30% for the baselines at their own budgets. We release the model, code, and a dataset of 2.42 million simulated and 14,107 real rope transitions at https://anonymous.4open.science/r/ForwardDLO/

0.36

Manifold Generative Annealing for Contact Constraint-aware Impedance Control with Reinforcement Learning Prior

cs.RO ·2026-10-15 ·Zhilin He, Guoquan Qi, Changliu Liu
similarity 0.64
Abstract

Contact-rich robotic tasks require coordinated motion and impedance under uncertain interaction dynamics and physical constraints. While recent methods on learned policies provide useful interaction strategies, they may fail when contact conditions differ from those encountered during training. Model-based generative methods show promising receding-horizon trajectories optimization results, but often lack structured behavioral guidance and refinement that jointly accounts for constraint geometry and actual contact responses. To this end, we propose Manifold Generative Annealing (MGA), a joint model-free and model-based generative framework for motion--impedance optimization. MGA first organizes pretrained reinforcement learning policies into structured sequence proposals, retaining task-specific interaction strategies without committing to their execution. It then evaluates these proposals alongside exploratory samples through model-based rollouts for refinement or separate execution selection. Crucially, realization-aware manifold refinement aligns updates from the refinement bank with both task constraints and locally achievable physical responses, allowing learned experience to guide online adaptation under changing contact conditions. Experiments cover surface scanning, peg insertion, and humanoid pushing, with improved safety success rate of impedance control under nominal and sensing-shift conditions.

0.14

Kinematic Constraint-Referenced Evaluation for Articulated Object Manipulation

cs.RO cs.AI ·2026-10-27 ·Baptiste Bonin, Caro Strickland, Audrey Durand
similarity 0.64
Abstract

Manipulation policies are evaluated predominantly by binary task success, which cannot tell whether the commanded gesture is the one the object's kinematics admit. We introduce Constraint-Referenced Strategy (CRS), which projects the commanded end-effector twist onto the object's joint axis, separating progress along the joint from off-constraint waste. CRS requires a joint model and a joint-following scripted controller derived from it, but no recorded demonstration or learned judge. On 74 simulated articulated objects, success registers three transfer failures as lower rates but attributes none, while the two CRS channels give each a distinct signature. A door-trained behavior-cloning policy opens drawers in 59 of 110 episodes, and in these passes it commands about $40\times$ the off-axis rotation of a drawer-trained policy's passes ($1.27$ vs.\ $0.032$~rad/s). Relative to a scripted controller scored with the same axis, CRS verdicts are unchanged under joint-axis errors up to $30^\circ$; absolute thresholds tolerate about $8^\circ$.

0.20