CS Paper Radar

From Nominal Capacity to Deliverable Compute: Design, Calibration and Validation of the D-PIN SCU Dynamic Metering System

Cheng Li, Jiexiong Liu, Shikun Wang, Feiyu Ren

cs.DC ·submitted 2026-10-12 08:23 UTC · v1
theory

Abstract

Nominal chip specifications do not capture the compute deliverable by heterogeneous distributed networks under communication, runtime and verification constraints. We formalize D-PIN Standardized Compute Units (D-PIN SCU) as a dynamic metering system for deliverable compute. The system combines five-dimensional resource normalization with topology-aware and runtime-corrected metering. A cluster-scale Roofline model yields a closed-form communication ridge, while runtime factors describe thermal, fault and load effects. We show that runtime deviations cannot be identified from nominal specifications alone. Uniform re-anchoring preserves relative metering results, and a simplex-constrained calibration algorithm estimates resource weights. The framework couples Proof-of-Physical-Work verification to a no-arbitrage condition for over-claiming and electricity-aware pricing. An end-to-end recomputation on the Zhangjiang Science Gate production node covers ten heterogeneous 8-GPU servers totaling 59.5 D-PIN SCU. Billed throughput of approximately 33,000 D-PIN SCU-hours is consistent with the physical upper bound at 78% utilization over 720 hours. Derived metrics are 3.02 kW per D-PIN SCU at the supply-and-distribution design boundary and 0.26 D-PIN SCU-hours per delivered kWh. Empirically calibrated chip values differ materially from datasheet projections; the published calibration is not independently reproducible from vendor specifications. Validation is limited to one production node, and the originality claim concerns the integrated system rather than the SCU terminology or individual components. The framework provides a basis for scheduling, verification and pricing of deliverable compute in distributed heterogeneous networks.

Comment
51 pages, including Appendices A-D

Closest papers

Nearest neighbours by meaning across the whole index.

Locational Marginal Pricing of Compute: Co-optimizing Compute and Energy for Transparent Data Center Flexibility

eess.SY cs.AI ·2026-11-15 ·Vladimir Pyltsov, Teng Zeng
similarity 0.60
Abstract

Demand from data centers and AI compute is growing rapidly and is increasing stress on the power grid. This load could be flexible through user adjustments and provide relief during energy scarcity events, yet today its flexibility is provided through utility call-ups or system-operator load shedding, and is invisible to the users whose workloads are being curtailed. In this work, we propose to quantify and couple the prices of compute and energy in a single optimization problem. The resulting compute price reflects the marginal cost of the binding constraints and decomposes into components indicating which grid, power, hardware, or service requirement causes a price surge. The economic interpretation updates the price with real-time conditions and gives users a signal for potential flexibility provision. The co-optimization ultimately connects compute and energy markets while providing a signal for relief of stress on both the grid and the compute resources.

0.32

Grid Demand Flexibility Assessment of AI Data Centers via Batch Workload Temporal Shifting

eess.SY ·2026-09-29 ·Suntao Su, Liang Du, Shengyi Wang
similarity 0.59
Abstract · 5 pages, 5 figures, conference

The rapid growth of artificial intelligence (AI) data centers has introduced new challenges to power system operation. As their power demand becomes larger and more variable, quantitatively characterizing their demand flexibility is increasingly important for effective power system coordination. However, heterogeneous workload characteristics and resource requirements make this flexibility difficult to characterize directly. This paper proposes a framework for assessing the grid-compatible demand flexibility of AI data centers via batch workload temporal shifting. An averaging-based resource usage processing method is developed to map fine-resolution CPU, GPU and memory usage into unified time intervals compatible with power system operation. A workload temporal scheduling model is then formulated to shift batch workloads while preserving execution continuity, delay constraints, and server resource capacities, and is coupled with a utilization-dependent server power model to translate workload scheduling decisions into server power demand. Two complementary flexibility metrics are evaluated: short-term peak demand shaving and the maximum duration of sustained power reduction. Numerical results based on real GPU cluster traces demonstrate that workload temporal shifting can provide quantifiable and grid-compatible demand flexibility for AI data centers with limited disruption to computing workloads.

0.13

Beyond Scalar Flexibility: From Eligible AI Workloads to Dependable Load Relief

eess.SY cs.DC ·2026-09-04 ·Meiyi Li
similarity 0.58
Abstract · 20 pages, 18 figures, 5 tables. Code and derived data: https://doi.org/10.5281/zenodo.22308423

Grid studies often represent data-center flexibility as a fixed percentage of load, although no public production trace has shown how much eligible load persists across event durations or co-moves across clusters. We reconstruct 4,439 hourly power observations from a 185-day trace of 155,410 GPUs and derive a workload-semantic flexibility envelope. The fleet's time-averaged Monte Carlo median facility demand is 55.8 MW, while immediate eligible curtailment averages 3.55 MW after retaining allocated-GPU idle power: 12.1% of workload power and 6.35% of median facility power. Under full realization of that eligibility, 95%-available relief falls from 2.51 MW for one hour to 2.32 MW for four hours and 1.95 MW for 24 hours; a common realizable fraction q scales every value exactly by q. A mean-calibrated scalar overstates these quantities by 17%, 25%, and 47%, while a scalar tail-calibrated at four hours understates the one-hour product by 6% and overstates the 24-hour product by 17%; the share that reproduces the surface varies by a factor of 1.6 across durations and reliability levels. Aggregating 13 clusters raises four-hour firmness from 0.38 to 0.66, but cross-cluster covariance limits the gain. The production scheduler exposes almost no additional delay-based capacity: newly deferrable arrivals average 0.008 MW and have zero 95%-available capacity. These results replace an assumed flexibility percentage with duration, reliability, portfolio, and realizability terms that can be written into interconnection and demand-response contracts.

0.20

Steady-State Equivalent Circuit Model for Data Center Loads

eess.SY ·2026-08-18 ·Muhammad Hamza Ali, Peng Sang, Hyeon Woo, Hyein Kang, Sungyun Choi +1 more
similarity 0.58
Abstract

Planners currently represent data centers as aggregate constant-PQ or ZIP loads in steady-state interconnection and contingency studies. These aggregate models are computationally convenient. However, they obscure the electrical relationship between computational workloads, server utilization, and grid-side demand. They ignore the internal power-electronic conversion stages of IT loads and assume homogeneous workload distributions across the compute clusters. This hides operating-point-dependent converter losses and efficiency variations. We propose a steady-state equivalent-circuit model (ECM) for data centers, which explicitly builds circuit models for IT loads, power supply units, cooling, and auxiliary systems. For power supply units, the equivalent circuit model explicitly represents internal power-electronic conversion stages. For IT loads, we develop a utilization-dependent server power model, and we combine it with loss-aware ECMs of power supply units. This approach captures the grid-side impact of heterogeneous workload distributions while preserving compatibility with conventional power-flow analysis. We evaluate this data center ECM in large-scale transmission power flows, using Monte Carlo simulations under heterogeneous and homogeneous cluster utilization. In comparison with the fixed-efficiency constant-PQ model, the ECM predicts that the most stressed line exceeds its thermal limit in about 30% of Monte Carlo samples. The results further show that homogeneous server utilization overstates line-loading variability by 17%-46% relative to heterogeneous server utilization, depending on the intra-cluster workload correlation.

0.47

PRO-RAN: Processor-Level Characterization of Open RAN Centralized and Distributed Units

cs.NI cs.PF ·2026-08-27 ·Moojan Kamalzadeh, Larry Horner, Linqi Xiao, Abhishek Bhattacharyya, Ehsan Bahaloo Horeh +3 more
hot direction similarity 0.58
Abstract · 7 pages, 6 figures

Open Radio Access Network (O-RAN) disaggregates RAN protocol functions and enables Centralized Unit (CU) and Distributed Unit (DU) software to execute on general-purpose computing platforms. Different CU and DU protocol responsibilities produce different processor workloads and execution paths. Conventional performance metrics, including CPU utilization and throughput, quantify aggregate resource usage without identifying function-level execution costs or processor microarchitectural bottlenecks. Processor-level characterization, on the other hand, provides insights into resource provisioning, function placement, software optimization, and hardware acceleration. The paper describes a controlled characterization framework that evaluates independently deployed CU and DU functions under matched hardware and traffic conditions. The experimental platform integrates the Linux Foundation OCUDU implementation with an emulated User Equipment, a ZeroMQ-based radio interface, and an Open5GS core. Automated validation confirms registration and bidirectional packet delivery before process-scoped Intel VTune Hotspots and Top-Down Microarchitecture Analysis. Under traffic load, accumulated process CPU time increases from 17.3 s to 37.4 s for the CU and from 462.0 s to 628.4 s for the DU during equal 300-s profiling intervals. The measurements identify distinct CU and DU execution characteristics and motivate function-specific processor analysis and optimization.

0.28

Dissecting How Die Scaling Breaks GPU Fine-grained Scheduling

cs.AR cs.DC ·2026-09-21 ·Xiaoze Fan, Jianhao Wang, Weihao Cui, Han Zhao, Zhuobin Huang +6 more
similarity 0.58
Abstract

Modern GPUs are no longer physically symmetric. Die scaling leads to both manufacturing-driven floorsweeping and cache and memory partitioning. The former creates chip-specific compute topologies, while the latter causes non-uniform memory access. These asymmetries are substantial. Topology-oblivious compute unit allocation can lead to up to 1.33x performance variation, while remote accesses increase HBM latency by up to 67% and nearly double L2 latency. However, these asymmetries are hidden behind the GPU's logical resource abstractions and can vary across chips. We develop lightweight characterization methods to uncover per-chip compute topology and memory affinity. We then use the discovered information to make existing fine-grained scheduling asymmetry-aware, considering not only how many resources are allocated but also which physical resources are assigned. Across full-GPU kernel execution, intra-application multiplexing, and inter-application co-location, asymmetry-aware scheduling improves mainstream kernels by up to 1.22x, multiplexed LLM inference by up to 14.3%, and avoids up to 1.33x performance variation.

0.38

ePACT: Energy-Performance-Aware Commitment Tracking for LLM Serving

cs.DC ·2026-10-01 ·You Peng, Youhe Jiang, Chen Wang, Binhang Yuan
similarity 0.57
Abstract

Reducing LLM serving energy does not by itself guarantee lower deployment cost when electricity procurement exposes operators to unfavorable deviations from preset commitments. We study hourly commitments with positive, potentially asymmetric costs for overuse and underuse, and formulate energy-Performance-Aware Commitment Tracking: minimize deviation costs subject to request-level service requirements. We implement ePACT, a two-level controller that adjusts serving capacity and GPU clocks as requests arrive. A global planner updates interval energy targets from measured consumption and the remaining hourly commitment. A local decision maker predicts candidate configurations' energy and completion times, checks predicted deadline misses, and selects among admitted configurations by asymmetric target-deviation cost, with a service-first fallback. Coarse-to-fine action search runs asynchronously with serving. We evaluate ePACT through single-hour comparisons, controller ablations, and full-day trace simulations for H20 and H200 GPU pools. In the 24-hour simulations, ePACT reduces the asymmetric deviation cost by $73.8\%$ and $75.7\%$ relative to vLLM while retaining near-vLLM SLO attainment. Mean absolute hourly deviations are $2.16\%$ and $2.31\%$, respectively.

0.17

Pricing Time, Not Just Tokens: Latency-Aware Mechanism Design for LLM Inference

cs.GT ·2026-09-30 ·Ian McDougall, Karthikeyan Sankaralingam
top venuetheory similarity 0.57
Abstract · 28 pages, 1 figure. Paper appears in the proceedings of the 27th ACM Conference on Economics & Computation (EC'26)

The economic theory of LLM pricing treats tokens as a homogeneous commodity considering aggregate token count as the main features buyers and sellers consider. We model inference as a service market where buyers have three-dimensional private information - willingness-to-pay, task volume, and time preference - and utility depends on latency slack alongside token quantities. Our main result is a separation theorem: discrete hardware tiers induce endogenous self-selection on time preferences, reducing three-dimensional screening to standard one-dimensional screening within each tier. We derive the cost structure from GPU inference physics - compute-bound prefill and bandwidth-bound decode - and characterize optimal tiered mechanisms via virtual-value techniques. Optimal per-task prices are volume-independent, providing theoretical grounding for flat per-token API pricing. We verify the mechanism empirically by calibrating to 8-GPU clusters of H100 and B200 hardware. The separation theorem holds in 83% of 105 tested configurations overall, rising to 96% at economically relevant WTP scales. A seller adopting two-tier pricing under the optimal mechanism captures 26-66% higher profit than the best single-tier alternative, with gains driven by efficient cross-tier allocation in regimes where hardware costs are a significant fraction of per-request value.

0.68