CS Paper Radar

A Deficiency-Based Approach for Unbalanced Three-Phase Distribution System Expansion Planning

Eli Brock, Miguel Heleno, Javad Lavaei, Somayeh Sojoudi

eess.SY ·submitted 2026-10-12 17:00 UTC · v2
benchmark

Abstract

Distribution planners typically characterize grid needs through power flow studies and fit upgrades to those needs by hand. More principled one-shot optimization methods either do not scale or misrepresent unbalanced three-phase networks. This paper proposes an iterative planning process that alternates between two problem classes with mature off-the-shelf solvers. An optimal power flow (OPF) problem quantifies the deficiency of a candidate portfolio by optimizing the dispatch of controllable devices and measuring thermal and voltage violations on a common scale, with an optimal value of zero exactly at adequate portfolios. The OPF multipliers give a first-order approximation of the relief each investment candidate would provide. We bound the error of this approximation and show that structural properties of the deficiency guard it against overestimation. Building on this property, a heuristic cutting-plane search uses a mixed-integer linear program to propose each next portfolio from these approximations. On six unbalanced three-phase feeders from the SMART-DS dataset, the search outperforms a linearized optimization-based benchmark, and the results agree across five variants of the deficiency.

Comment
12 pages, 1 figure, 3 tables. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Closest papers

Nearest neighbours by meaning across the whole index.

Scalable Self-Supervised Learning for Multiphase AC-OPF in Distribution Systems with Topology Reconfiguration

eess.SY cs.LGmath.OC ·2026-08-25 ·Hoang T. Nguyen, Shaohui Liu, Reetam Sen Biswas, Varsha Pendyala, Nurali Virani +2 more
similarity 0.68
Abstract · Source code will be published following the review process

The proliferation of distributed energy resources (DERs) in distribution grids enables the active coordination of these assets to reduce costs and enable cleaner operations. Realizing this potential requires solving multiphase AC optimal power flow (AC-OPF) quickly across varying loads, DER availabilities, and topology reconfigurations, at much greater speed and scale than conventional nonlinear solvers. Learning-based surrogates can offer millisecond inference, yet existing methods target largely balanced transmission systems and do not scale to the multiphase, unbalanced, and reconfigurable nature of distribution feeders at utility scale. We present the Penalty + Sequential Linearized Feasibility Seeking (SLFS) algorithm, a self-supervised learning framework for multiphase distribution AC-OPF under switch-induced topology changes. Penalty+SLFS requires no labeled optimal solutions and trains directly from the AC-OPF objective and constraints through a differentiable fixed-point power flow solver, avoiding expensive label generation and admitting robust training procedures. Topology changes are handled efficiently using Sherman-Morrison-Woodbury updates of the admittance-matrix inverse, while an M-step Jacobian approximation accelerates differentiation through the power flow solver. At inference, SLFS repairs any infeasible predictions, providing feasibility guarantees with low computational overhead. On IEEE feeders ranging from 13 to 8,500 nodes, Penalty+SLFS achieves negligible optimality gaps and near-zero constraint violations, delivers up to three orders of magnitude speedups over IPOPT, and remains robust under large distributional shifts, demonstrating a viable path toward real-time, topology-aware AC-OPF for large-scale distribution grids.

0.23

Benchmarking a Grid Foundation Model for AC Optimal Power Flow: Feasibility and Warm-Start Results on Synthetic Texas and South Carolina Grids

eess.SY ·2026-11-17 ·Tam Kemabonta, Brighton Ombuki, Vladimir Abdelnour
similarity 0.63
Abstract · 5 pages, 3 figures, 2 tables. Submitted to the 2027 IEEE PES General Meeting

Learning-based surrogates for alternating-current optimal power flow (AC-OPF) are often judged by the gap between their objective value and that of a nonlinear solver, which does not show that a prediction satisfies power balance and network limits. This paper tests whether predictions from the pretrained foundation model GridSFM-Open 1.1.0, recently released by Microsoft, are feasible AC-OPF operating points and whether they are useful initial values for a nonlinear solver. The model was evaluated zero-shot and after fine-tuning on 10, 100, and 1,000 labeled scenarios (FT10, FT100, and FT1000) on 500 scenarios for each of two synthetic grids, ACTIVSg2000 (Texas) and ACTIVSg500 (South Carolina), with Ipopt, MATPOWER MIPS, and pandapower PIPS as solver references. The lowest Texas median cost gap, 0.44\% for FT100, coincided with thermal violations in 24.1\% of cases and a median maximum bus power mismatch of 89 MW and 197 Mvar. Texas zero-shot predictions had a median maximum mismatch of 648 MW and 1,641 Mvar, and every South Carolina case violated a thermal limit for every model variant. Seeding Ipopt with FT1000 predictions gave geometric-mean solve-time speedups of 1.55x on South Carolina and 1.12x on Texas (p = 0.06, not significant at the 5\% level), while zero-shot seeds slowed South Carolina solves (0.26x). A small objective gap therefore did not indicate feasibility: although median zero-shot inference took only 1.32 s on Texas and 0.157 s on South Carolina on a shared host, every prediction still required a nonlinear solver, and fine-tuned predictions gave modest, grid-dependent warm-start speedups while zero-shot predictions slowed convergence on one grid. GridSFM may therefore be useful for initializing a nonlinear solver, but obtaining feasible AC-OPF solutions still required the solver.

0.36

Modeling of Network Constraints in Large-scale Capacity Expansion Optimization of Power Grids

eess.SY math.OC ·2026-08-28 ·Yu Weng, Lara Booth, Priya L. Donti, Ruaridh Macdonald
publishedtheoryhot direction similarity 0.61
Abstract

Capacity expansion modeling plays a critical role in optimizing the deployment of new generation, storage, and transmission, typically at national and regional levels. To support long-term planning, these models consider a large set of energy technologies and policies, along with decades of weather and demand data. Realistic capacity expansion models thus become high-dimensional optimization problems, with hundreds of millions of variables and constraints, which are challenging to solve. A common strategy to address this complexity is to omit non-linear, non-convex AC optimal power flow (ACOPF) constraints and instead use linearized power balance equations or transport formulations. While these simplifications improve tractability, they limit our understanding of how power flow and the physical properties of power networks impact investment decisions across generation, storage, and transmission infrastructure. This paper addresses this gap by extending the GenX capacity expansion model to incorporate fixed point theorem-based network constraints. These embed ACOPF-based considerations while maintaining the tractability of the planning model, nearly preserving the dimensionality of the transport formulation and incurring only modest runtime increases. This approach is much cheaper than embedding ACOPF directly, making it appropriate for large-scale capacity planning problems. We compare our approach to the original transport-based GenX model as well as a non-linear, non-convex version that incorporates the full ACOPF constraints, for a case study of the ISO New England grid.

0.47

A Multi-Stage Linear Programming Framework for Three-Phase State Estimation in Low-Voltage Distribution Grids

eess.SY ·2026-09-24 ·Mohsen Banaei, Eghbal Hosseini, Ahlam Jameel, Konstantin Filonenko, Shahrzad Pour +1 more
published similarity 0.61
Abstract · Presented at the International Energy Future Conference, 2025, Rome

Low-voltage (LV) distribution feeders are increasingly difficult to monitor because real-time load data are unavailable, historical measurements are sparsely sampled, and high-rate voltage sensors cover only a few nodes. This paper proposes a multi-stage linear programming (MSLP) estimator for three-phase unbalanced LV grids that reconstructs per-phase nodal voltages under such limited observability. The estimator linearises the three-phase power flow through voltage-to-power sensitivity matrices and adjusts the nodal active and reactive power injections so that the resulting voltages match the available measurements. To limit the error introduced by linearisation, the sensitivities are rebuilt and the power corrections refined over successive iterations, and power-balance constraints at intermediate metered nodes are added to tighten the feasible region. The method is validated on a real 50-node Danish LV feeder, where it attains a mean absolute error of 0.641V, a standard deviation of 0.816V, a root-mean-square error of 0.842~V, and a maximum error of 3.437V. Compared with a single-stage linear estimator, MSLP lowers the error metrics by roughly 16 percent on average, and additional studies quantify the influence of the input-preparation strategy and of the number of estimation meters.

0.32

Facet-offset Polytope Expansion for Dynamic Operating Envelopes of Aggregated Distribution Grid Resources

eess.SY ·2026-11-17 ·Feng Chen, Kumarsinh Jhala, Kiran Kumar Challa, Zongjie Wang
similarity 0.61
Abstract · 2027 IEEE PES Grid Edge Technologies Conference & Exposition

This paper presented a facet-offset polytope expansion framework with sensitivity-informed directions (FOPE-sen) for constructing DOEs in three-phase unbalanced distribution systems. The facet directions are selected from DGR coordinate directions and sensitivity-informed network-critical directions, while the facet locations are determined through a two-step bisection procedure guided by a power-flow feasibility oracle. Numerical results demonstrate that FOPE-sen captures at least 106% more flexibility per dimension than box-shaped and random-direction expansion methods. Moreover, FOPE-sen constructs DOEs comparable to or larger than those of VBPE while using fewer than 1/40 as many facets in dimensions greater than four. Future work will focus on stronger safety verification for nonconvex AC feasible regions, scalability in high-dimensional spaces, and extensions to multi-aggregator allocation and market-participation applications.

0.26

Data-driven Linearization of Operational Dynamics of Soft Open Points in Power Distribution Networks

eess.SY ·2026-11-19 ·Shoaib Hussain, Mostafa Farrokhabadi, Hamidreza Zareipour
hot direction similarity 0.60
Abstract · 7 pages, 7 figures, 5 tables

This paper proposes a novel data-driven linearization of operational power losses in a Soft Open Point (SOP). The proposed learning-based representation, combined with the standard segmentation of the quadratic device capacity inequalities, linearizes the operational dynamics of SOPs in unbalanced power distribution network applications without a significant drop in power loss estimation accuracy. The technique was tested in three applications using a three-phase extension of the IEEE 33-bus network. The case studies include a sizing application for a multi-terminal phase-changing soft open point (PCSOP), an operational optimization application for an active distribution network featuring a PCSOP, and a system simulation engine built for a Deep Reinforcement Learning (DRL) application that trains an agent to optimally dispatch a PCSOP in an unbalanced distribution network. The results of the three case studies were validated against the standard nonlinear AC load-flow representations and point to the efficacy of the proposed solution.

0.41

Computationally Transparent Power Flexibility Aggregation via Directional Support Evaluation

eess.SY ·2026-10-21 ·Mingyu Zhai, Liang Du, Yue Chen
similarity 0.60
Abstract · Preprint. Submitted for journal review

The growing penetration of distributed energy resources (DERs) creates new opportunities for improving resource adequacy, operational flexibility, and power-system reliability. However, efficiently characterizing the aggregate flexibility of heterogeneous DER portfolios remains challenging because of high dimensionality, diverse operating dynamics, and spatio-temporal coupling constraints. This paper proposes a computationally transparent framework that formulates aggregate flexibility characterization as a sequence of linear programming (LP)-based directional support evaluations. The framework accommodates heterogeneous DER technologies and configurable device-, feeder-, and portfolio-level constraints. The convex hull of the resulting boundary trajectories provides a feasible inner approximation of the coupled aggregate power flexibility region. Theoretical analysis establishes feasibility and non-overestimation guarantees and characterizes the computational dependence on portfolio size, scheduling horizon, and direction budget. In the small-scale case, the proposed method produces tighter projected regions than box, zonotope, and Chebyshev inner-ball benchmarks and matches a dense directional reference within numerical tolerance using 16--64 construction directions. Large-scale simulations with up to 2000 DERs demonstrate approximately linear empirical runtime scaling with the portfolio size and direction budget over the tested ranges. The results establish a scalable and theoretically grounded approach for aggregate DER flexibility characterization.

0.27

Efficient Quantile-Resolved Hosting Capacity Assessment on Nodal Level for Low-Voltage Grids

eess.SY ·2026-09-08 ·Maximilian Köhler, Edwin Mora, Mathias Duckheim, Stefan Niessen
similarity 0.60
Abstract · Submitted to IEEE PES ISGT Europe 2026. 5 pages, 3 figures. Keywords: Hosting Capacity, Uncertainty, Distribution Grid, Distributed Energy R…

Hosting capacity - the maximum additional capacity a network can accommodate without violating operational limits - is a key metric in distribution system planning and operation. Decisions on grid reinforcements and the deployment of flexibility management require not only the worst-case HC but also an understanding of the distribution of HC under different likelihoods in load and generation patterns. Quantile-resolved HC distributions provide this view by expressing HC as a function of an acceptable operational limit exceedance likelihood. Monte Carlo sampling is the established approach for computing such distributions but demands large computational resources. Approximations sacrifice either accuracy, the ability to capture uncertainty correlations, or scalability when assessing real-world networks. This paper introduces a computationally efficient method for calculating distributions for quantile-resolved HC. It uses a representation of load samples as multivariate normal distribution, propagated through a linearized power flow model. This allows for leveraging a re-parametrized AC-OPF problem for each hosting capacity quantile. Benchmarking against Monte Carlo-based methods on realistic LV networks demonstrates that the proposed method achieves comparable accuracy with a mean deviation of approx. 3%, while reducing computational time by orders of magnitude. For the exemplary networks the computational time decreases from 11 min to 2 s, and 38 h to 50 s, respectively. The method's scalability is also suitable for recalculation in 15-minute cycles encountered in DSO practice for e.g., real-time grid management.

0.21