CS Paper Radar

Event-Triggered Data Selection for Online Frequency-Domain Identification

Enrico Dozzi, Tom Oomen, Rodrigo González

eess.SY eess.SP ·submitted 2026-10-15 14:26 UTC · v1

Abstract

Online identification of frequency response functions is increasingly relevant for control and monitoring of high-performance systems whose dynamics may change during operation. In modern machines, however, continuously transmitting all locally acquired measurements to a central unit for identification can impose substantial communication demands, particularly as sensing rates and the number of subsystems increase. This paper develops an event-triggered data-selection approach for remote frequency-domain identification, in which periodically acquired measurements are evaluated locally and transmitted only when relevant. The selection mechanism combines information about the current estimation uncertainty with evidence of model mismatch, reducing communication while preserving identification accuracy and responsiveness to changes in the dynamics.

Comment
8 pages

Closest papers

Nearest neighbours by meaning across the whole index.

Adaptive Predictive Sampling and Communication for Real-time Monitoring

eess.SP eess.SY ·2026-09-22 ·Erfan Delfani, Nikolaos Pappas
similarity 0.59
Abstract

We propose an adaptive predictive sampling and communication framework for real-time remote monitoring over packet-erasure channels. Rather than relying on a prescribed dynamical model or continuous sensing, our model-free method uses Taylor-expansion-based prediction to adaptively estimate local signal dynamics and proactively schedule the next sampling times. An analytical compensation factor accounts for packet losses to satisfy a prescribed reconstruction-error level. We develop adaptive sample-wise and episodic policies and evaluate their performance against event-driven and uniform sampling and communication baselines.

0.23

On Sample Complexity Bounds for Frequency-Domain System Identification

eess.SY ·2026-10-22 ·Arya Honarpisheh, Mario Sznaier
theory similarity 0.50
Abstract

We study the sample complexity of frequency-domain system identification with bounded measurement noise. We focus on interpolatory identification algorithms, which return models consistent with both the data and a priori constraints. For equally spaced samples, we sharpen previous worst-case bounds on the consistency-set radius. Its excess above the noise level decays as $N^{-2}$, where $N$ is the number of samples, and a matching lower bound shows that this rate is tight. We then examine whether bounded stochastic noise allows identification below the noise level. We show that high-probability error bounds can converge to zero. Their convergence rate depends on how strongly the noise distribution is concentrated near the boundary of the noise set. For example, noise uniformly distributed on a disk gives an upper bound of order $(\log N/N)^{2/3}$. Numerical experiments examine these convergence rates and the effect of the noise distribution on the identification error.

0.20

Distributed Edge-to-Cloud Architecture for Continual Harmonic Load Modeling

eess.SP ·2026-09-14 ·Bhaskar Mitra, Soumya Kundu
similarity 0.50
Abstract · 5 pages

Rapid proliferation of power electronic loads at the distribution grid edge has made accurate harmonic load modeling critical for power quality assessment, transformer derating, and grid planning. Existing Frequency Coupling Matrix (FCM) identification methods produce static, one-time models that rapidly lose fidelity as load composition evolves. This paper proposes a distributed edge-to-cloud architecture for autonomous, continual FCM re-identification under real field conditions, with two contributions: (i) a state-machine-driven pipeline that monitors point-on-wave (PoW) measurements and triggers FCM re-identification only when model accuracy falls below a set threshold; and (ii) an edge-to-server architecture confining waveform processing to a low-cost Raspberry Pi node, transmitting only compact JSON model updates upon confirmed change rather than streaming raw PoW data. Validated through a residential field deployment, the framework triggered retraining in 3 of 33 monitoring cycles and restored system modeling accuracy above the 80\% threshold after each event, reducing upstream data transmission by 99.7% relative to continuous streaming.

0.34

Real-Time Edge-based Detection of Correlated AI Data-Center Load Episodes

eess.SY ·2026-08-24 ·Chandan Chaudhary, Abanish Tiwari, Yansong Pei, Mohammed Ben-Idris, Joydeep Mitra
similarity 0.49
Abstract · Submitted to 2027 IEEE PES Grid Edge, to be held in 19-22 April, Salt Lake City, Utah, USA

Artificial-intelligence data centers running bulk-synchronous training can impose sub-second power swings. When several facilities synchronize their training cycles, these load variations become spatially correlated and amplify the aggregate disturbance on the grid. A grid operator without access to data-center telemetry must infer this correlation from electrical measurements alone. However, the required observation time and the feasibility of detection on substation-deployable hardware remain uncharacterized. This paper develops a correlation-based detection method to classify the multi-facility operating regime from cross-facility power measurements. Analytical derivations and experimental validation show that the resulting detection confidence increases with the observation-window length at a rate governed by the load correlation time. The method is demonstrated in a real-time hardware-in-the-loop testbed, where load setpoints generated from a validated semi-Markov data-center load model are applied to an electromagnetic-transient grid simulation on a Real-Time Digital Simulator. A compact classifier built on pairwise power correlations runs on an edge device in this loop and determines whether the data-center load variations are independent or spatially correlated. The cross-facility correlation separates the independent and correlated cases across independent realizations. The held-out detection accuracy improves with the observation window, consistent with the predicted relation. A raw-waveform network fails to generalize, supporting pairwise correlation as the discriminative signal. The detector executes in real time on commodity edge hardware. A closed-loop demonstration against the running simulator tracks a regime change within one observation window.

0.43

Information-Theoretic Threshold Design for Sparse Event Encoding in Learning Systems

eess.SY ·2026-11-10 ·Pratishtha Shukla, Maksudul Alam, Srikanth B. Yoginath, Ali R. Ekti
similarity 0.48
Abstract

One approach to event-driven learning is to encode continuous signals as sparse events generated when signal changes exceed a prescribed threshold. However, this threshold is typically selected empirically, with limited theoretical guidance. This paper establishes a connection between threshold-based event encoding and discretized learning systems and identifies a dimensionless ratio governing information retention. From this connection, we derive an information-sufficiency boundary using normal-condition data and formulate a data-driven criterion that selects the sparsest threshold retaining a prescribed fraction of peak discriminative information. The framework is illustrated using event cameras and evaluated on power-system fault classification. Results show that the proposed design identifies sparse operating thresholds while exposing the tradeoff between information retention, event activity, and classification performance.

0.24

Minimizing Age of Incorrect Information in Pull-Based Remote Estimation of a Markov Source

cs.IT cs.NImath.PR ·2026-10-15 ·Ismail Cosandal, Sennur Ulukus, Nail Akar
similarity 0.48
Abstract

In this paper, we consider a discrete-time pull-based remote estimation system involving an information source and a remote monitor where the information source is a finite-state irreducible discrete-time Markov chain (DTMC) process. In this system, the remote monitor sends a pull request towards the source which responds by sampling its process so as to transmit the sampled values towards the monitor through a delay channel, encapsulated in information packets. We consider i) zero delay (ZD) and ii) unit delay (UD) channels, where the packet transmission times are zero and one slot, respectively. For remote estimation, we use the maximum a posteriori (MAP) estimator, and for quantifying its performance, we use the mean age of incorrect information (MAoII) which is a recently proposed freshness and mismatch metric that penalizes an incorrect estimation along with its duration. Our goal is to obtain pull policies so as to minimize MAoII under a long-run sampling rate constraint. For the ZD model, we propose a semi-Markov decision process (SMDP) formulation of the problem, which allows us to find the optimum observation-dependent pull policy. On the other hand, the UD channel prevents the monitor from possessing perfect information on the actual AoII process at any given time, and the SMDP formulation of the ZD channel cannot readily be used for the UD model. For the system with the UD channel, we first provide a numerical algorithm to calculate the MAoII and the average sampling rate for a given observation-dependent pull policy. For the optimization of the underlying remote estimation system, we use the joint distribution of the age and source processes to be obtained from the history of all observations, termed as belief. Subsequently, we propose a belief-dependent policy obtained via the belief-MDP formulation and a constrained deep reinforcement learning (CDRL) algorithm.

0.11

Data-Driven Generator Transient Prediction for Digital Twin Decision Support

eess.SY eess.SP ·2026-09-04 ·Emad Sadeghi, Emerson Miller, Kerry Sado, Adel Nasiri
similarity 0.47
Abstract · In submission for possible publication in IEEE Transactions on Power Systems

This paper develops a calibrated transient forecasting surrogate model for generator digital twin (DT) decision support that evaluates planned active- and reactive power load commands before they are applied. The proposed event-conditioned Hankel Dynamic Mode Decomposition with Control (Hankel-DMDc) model combines delay-coordinate lifting, command-event memory features, and an event-weighted Hankel basis so that sparse load-transition dynamics influence the reduced representation and fitted dynamics. This design targets intervals where voltage/frequency deviations and recovery behavior determine whether a candidate load command keeps the system within acceptable limits. To provide operator-facing confidence information, a split-conformal calibration layer is applied to the frozen surrogate model to form event-conditioned joint prediction bands for voltage and frequency. The experimental results show event-window root-mean-square errors of 1.058 V and 0.155 Hz. For a nominal 90% target, the bands attain 90.17% pointwise joint voltage-frequency coverage, with mean band widths of 3.55 V and 0.566 Hz. A 50-s open-loop rollout is computed in 181 ms on a single CPU core, approximately 280 times faster than real time, with forecast accuracy evaluated over horizons up to 5 s. These results demonstrate a computationally efficient advisory framework for generator DTs that combines transient prediction with calibrated uncertainty.

0.25

Real-time and adaptive anomaly detection algorithm for cyclostationary models

cs.LG stat.ME ·2026-09-08 ·Justyna Witulska, Tomasz Barszcz, Ireneusz Jabłoński, Agnieszka Wyłomańska
similarity 0.47
Abstract · 16 pages

This article introduces PeriodicCALM, an effective real-time anomaly detection framework designed for cyclostationary data streams. While classical cyclostationary processes feature periodically time-varying statistical properties, real-world signals often contain recurring impulsive components that conceal abnormal behavior. Existing real-time methods for struggle with these dynamics, frequently misinterpreting phase-dependent variability as non-cyclic anomalies and causing excessive false alarms. To address this, PeriodicCALM incorporates cycle-dependent variability to systematically ignore regular cyclic impulses while accurately isolating genuine anomalies. Operating in real time with continuous retraining capabilities, the method adapts dynamically to evolving signal characteristics. Comparative evaluations against the baseline CALM framework using simulated data demonstrate significant improvements in detection accuracy and training efficiency, alongside a reduction in prediction latency. Furthermore, the practical utility of PeriodicCALM is validated on real-world vibration signals collected from a compressor monitoring system.

0.30